Superfast external AXAGON EEM2-GTR THIN RIB box koos USB 3.2 Gen 2 interface is designed NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C ühenduspesa on the box together koos the supplied USB-C -> USB-C kaabel enables a reliable connection t
50m 4 Port USB 2.0 Cat.5e Extender 50m Extension for 4 USB devices powered over Cat.5/6 cable - Extend 4 USB 2.0 ports up to 50m using low cost Cat5/5e/6 network cable (not included) - Power over Cable requires a single power supply to be connected to the transmitter only - Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed - Plug & Play installation This Lindy USB 2.0 Cat.5 Extender can be used to extend the distance between four USB peripheral devices and the host computer by up to 50m. A standard, low cost Cat.5/5e/6 network cable (not included) is used to bridge the connection between the transmitter and the receiver unit. For best performance and compatibility, we recommend the use of solid core patched cables
With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Kiire HDMI kaabel koos EthernetigaHDMI pistik (tüüp A) > HDMI pistik (tüüp A)Goobay HDMI-kaabel suurejoonelise meelelahutuse jaoks. Kombineeri kõrglahutusega, viivituseta 4K-videoülekanne uimastava 7.1 ruumilise heli, Dolby Atmose või DTS:X-iga, et saavutada suurepärase pildi- ja helikvaliteediga kaasahaarav filmi- ja mängukogemus.Kaabel sobib kõrgresolutsioonilise pildi edastamiseks Ultra HD-ga kuni 4K @ 60 Hz (tagasiühilduv) ja kuni 18 Gbit/s andmesidekiirusega.Sobib ideaalselt heli ja video edastamiseks teleri/monitori ja projektorite, mängukonsoolide (nt PlayStation, Xbox) või voogedastusvastuvõtjate (nt Amazon Fire TV, Apple TV) vahel.Integreeritud Ethernet-kanal (HEC) ühendab mis tahes HDMI™-seadme juhtmega võrgus olevate seadmetega ilma eraldi internetikaablitetaCEC-funktsioon (Consumer Electronics Control) loob paindliku juhitavuse vaid ühe kaugjuhtimispuldi abil, nt mitme ühendatud HDMI™-seadme sisselülitamiseks ühe nupuvajutusega.Toetab 3D ja HDR (High Dynamic Range), mis tagab suurepärase ja kontrastse pildikvaliteedi ning HDCP 2.2 krüpteerimissüsteemi.Toetab täiustatud audiofunktsioone, nagu eARC (Enhanced Audio Return Channel) ja ARC (Audio Return Channel), mis võimaldavad lihtsat digitaalset edastamist telerist helibaarile või hi-fi-süsteemile.Kullatud kontaktid hoiavad ära korrosiooni ja tagavad täiendava vastupidavuse
CABLE HDMI M/M V2.1 40M 8K BLACK OPTICAL AOC LANBERG Optical HDMI cables allow for lossless transmission of audio and video signals over huge distances. Thanks to the use of optical fiber as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows you to transmit images in 8K quality at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, you can increase the resolution up to a maximum of 10K! ATTENTION Due to its construction, an optical HDMI cable only transmits the image in one direction. Pay attention to the markings on the plugs in order to connect the product correctly.
CABLE HDMI M/M V2.1 30M 8K BLACK OPTICAL AOC LANBERG Optical HDMI cables allow for lossless transmission of audio and video signals over huge distances. Thanks to the use of optical fiber as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows you to transmit images in 8K quality at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, you can increase the resolution up to a maximum of 10K! ATTENTION Due to its construction, an optical HDMI cable only transmits the image in one direction. Pay attention to the markings on the plugs in order to connect the product correctly.
The DIGITUS video/audio extender kit offers a comprehensive solution for extending your HDMI and USB-C connections wirelessly over distances up to 30 m. Designed to support 4K video resolution at a 30 Hz V-Sync rate, it ensures high-quality visuals for presentations, movies, and more. The inclusion of HDMI and USB-C ports on both the transmitter and receiver makes it compatible with a wide range of devices, providing flexibility for various setups. Security is paramount, with 128-bit AES, WPA2-Enterprise, and WPA2-PSK encryption algorithms safeguarding your transmissions. Additionally, the device's durable ABS housing and compliance with key standards like DisplayPort 1.2 and HDCP 2.2 ensure reliability and longevity. Whether for professional presentations or enhancing your home entertainment system, this extender kit delivers both performance and peace of mind.
The DIGITUS video/audio extender kit is designed to meet the needs of users requiring high-quality, secure, and flexible wireless video and audio transmission. This kit supports 4K resolution and a 30 Hz V-Sync rate, ensuring that your visuals are not only clear but also smooth. With the inclusion of IEEE 802.11ac technology, it offers reliable wireless connectivity up to 30 m, making it ideal for presentations, streaming, and more in large rooms or across different spaces.Security is paramount, and this device delivers by incorporating 128-bit AES, WPA2-Enterprise, and WPA2-PSK encryption algorithms, protecting your data from unauthorized access. The kit comes with a variety of cables and connectors, including USB-A to USB-C, HDMI, and USB-C extension cables, providing you with the flexibility to connect different devices easily. Additionally, its Plug-and-Play functionality, complemented by a LED status indicator, ensures a hassle-free setup, allowing you to get started quickly without the need for complex configuration.
The Neomounts by Newstar desk mount, model FPMA-D860DBLACK is a tilt-, swivel and rotatable desk mount for two flat screens up to 27?. This mount is a great choice for space saving placement on desks. Neomounts by Newstar's versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 24 to 47 centimetres. Depth 5 centimetres. Neomounts by Newstar FPMA-D860DBLACK has one pivot point and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 7 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 27" - Desk mount: Desk clamp & grommet - Depth: 5 cm - Height:24 - 47 cm - Tilt:20° - Rotation: 360° - Swivel: 20°
Connect your USB-C device to the Ethernet with this easy-to-carry, Plug-and-Play Ethernet adapter. Get the fast Internet speed of a wired Ethernet connection for fast and reliable streaming and downloads.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Enhance storage capabilities with the DIGITUS storage enclosure. Built for M.2 NVMe cards, this product supports a data transfer rate of 20 Gbps, ensuring speedy access to your files and applications. The aluminum design provides durability while facilitating heat dissipation, making it suitable for various environments with operating temperatures from 5°C to 50°C. With a compact length of 25 cm, this USB-C to USB-C external cable ensures a tidy and efficient setup without compromising performance.This storage enclosure supports up to 8 TB capacity, allowing ample space for your essential data. The LED indicator offers a clear view of the device's status, providing real-time feedback on its operation. It is user-friendly with its Plug-and-Play capability, seamlessly connecting via USB 3.2 (Gen 2) to your devices. Ideal for those looking to expand storage options without the hassle of complex installations.
The DIGITUS DA-73109 USB extension cable enhances connectivity and data transfer rates for devices. Featuring double shielded technology, this cable ensures reliable performance in demanding environments. With USB 3.0/ USB 3.1 compliance, it supports data rates of up to 5 Gbps, allowing for efficient and fast data transfer. The male 24-pin USB-C connector on one end and the female 24-pin USB-C connector on the other provide versatility in connecting various devices.
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
The Club 3D CAC-1572 Thunderbolt cable offers performance with compliance to multiple standards including USB4, Thunderbolt 3, Thunderbolt 4, and DisplayPort 2.1. This bidirectional cable features a 24 pin USB-C connector on both ends, ensuring compatibility across a range of devices. Utilize this technology to achieve a transfer rate of up to 80 Gbps, enabling rapid data transfer and seamless connectivity.Designed with high-quality materials, the cable jacket is constructed from thermoplastic elastomer (TPE), providing durability and flexibility. With support for resolutions such as 16K at 60Hz, 4K at 540Hz, and 8K at 240Hz, this cable is equipped to handle high-resolution content with ease. Additionally, it supports USB Power Delivery of 240W, making it a choice for powering devices while maintaining high-speed data transfer efficiency.
The DIGITUS USB extension cable DA-73111 offers reliable connectivity for your devices. With compliance to USB 3.0 and USB 3.1 standards, this cable ensures fast data transfer speeds of up to 5 Gbps. Its double shielded design helps protect against interference, ensuring a stable connection.Equipped with a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable is versatile and compatible with a wide range of devices. Whether extending the reach of your peripherals or setting up your workstation, the DIGITUS USB extension cable provides dependable performance and connectivity.
The DST Mini is a compact, multifunctional mini docking station. Part of Lindy's expert docking station range, this product is great for those who need a lightweight, portable solution but cannot compromise on functionality. With SuperSpeed USB, 4k capability and pass-through charging, this docking station is a great solution for any hybrid worker. The DST-Mini's USB Type A ports are multifunctional. This means that not only do they support SuperSpeed data transfer, but also USB Battery Charging Specification 1.2 for charging mobile devices and other smaller peripherals, quickly.
The Club 3D CAC-1559 video adapter cable offers connectivity options with performance. Compliant with DisplayPort 2.1 standards, this cable provides a connection between devices with its 24 pin USB-C and 20 pin DisplayPort connectors. The cable supports DisplayPort Alternate Mode, enabling video transmission for resolutions up to 10K at 60 Hz, suitable for both professional and personal use. It features error correction, kink protection, and a transfer rate of up to 80 Gbps to ensure a connection.With support for multiple display resolutions including 8K at 60 Hz and 4K at 240 Hz, this cable is designed to handle the demands of high-definition audio and video experiences. Certified by VESA DP80, it is compatible with a wide range of devices and meets FCC, RoHS, and EMI standards, assuring users of its quality and safety. The bidirectional functionality ensures versatile connectivity, making it an essential tool for anyone seeking high-performance video solutions.
Pixel A4 Laminator Stylish laminator for a variety of laminating applications in the home or small office Fast heat-up time. Ready to go in 3-minutes 80 & 125 micron laminating capability for added versatility Release trigger for retrieving and re-aligning misfed documents Auto-shut off after 30 minutes inactivity Includes a starter kit for 10 documents
The Gembird Cablexpert power connector adapter is a must-have tool for ensuring your devices maintain power connectivity in various environments. Designed to offer a seamless transition between power 3-pole (UK) and power CEE 7/4 connections, this adapter is the perfect solution for travelers, businesses, and home use. It adheres to stringent safety and environmental standards, including EMC 2014/30/EU, RoHS 2011/65/EU, and several EN compliance marks, ensuring its reliability and safety in any setup. With the capability to handle a rated current of 13 A, it's built to last and provide a dependable connection. Whether you're adapting to different power systems or ensuring your devices are safely powered, the Cablexpert power connector adapter is your go-to choice for power connectivity.
Compact aluminum external AXAGON EE25-XA6C ALINE box with USB-C 5Gbps interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. Lightweight yet durable aluminum body provides excellent mechanical protection for the drive and ensures efficient heat dissipation. The elegant brushed surface casing offers a sleek look while preventing unwanted fingerprints. Input: USB 5Gbps (USB 3.2 Gen 1), connector USB-C female. Compatible with USB 480Mbps, USB 10Gbps. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable 50 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Other data: Box dimensions 13 x 129 x 79 mm. Weight 82 g (without cable and disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support.Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 5Gbps external box for 2.5" SATA disk, USB-C - USB-A cable 50 cm long, self-adhesive foam pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Height-Adjustable Monitor Stand, 1732 inches, up to 8 kg Position your screen perfectly for an optimal, ergonomic setup Compact, space-saving solution Product Features: Height-adjustable, fully movable monitor stand 10-level height adjustment adapts to different monitor sizes and provides a better viewing height Allows screen rotation and tilt, as well as switching between landscape and portrait mode Works with almost any LCD monitor (max. 32" / 8 kg) Sturdy base plate for secure placement on any desk Built-in cable management for an organized and tidy workspace VESA compliant, max. 100 × 100 mm
1xNumber of displays supported | Maximum weight capacity (per display) 40 kg | Maximum weight capacity 40 kg | Minimum screen size 37 " | Maximum screen size 75 " | Minimum VESA mount 75 x 75 mm | Maximum VESA mount 600 x 400 mm | Mounting type Desk | Height adjustment Yes | Swivelling Yes | Housing material Steel/Plastic/Tempered glass | Colour Black
Fully Mobile Desk Mount for screens up to 49" and a maximum weight of 20kg - suitable for both flat and curved monitors. This fully mobile desk mount is specially designed for large monitors up to 49 inches and weighing up to 20kg, making it ideal for demanding work environments and high-quality setups. Whether for flat or curved screens, the mount provides maximum stability and flexible, space-saving positioning. Its robust, durable construction easily supports heavy monitors while allowing precise adjustment in all directions. The integrated spring tension mechanism ensures smooth weight adjustment, so the monitor can be effortlessly positioned without the need for repeated calibration. The VESA quick-release feature allows fast and easy mounting or dismounting of the monitor. An innovative quick connector simplifies joining the two arm segments, significantly reducing assembly effort. With two versatile mounting options - desk clamp or grommet - the mount can attach to almost any workstation. The built-in 180° rotation limiter prevents accidental collisions with walls or neighboring screens, and smart cable management keeps the setup neat and professional. Perfect for users who value ergonomics, stability, and functionality - in the office, studio, or at home. Compatible Screens: Supports flat and curved monitors up to 49" Durable Construction: Maximum load capacity of 20kg Space-Saving: Integrated cable management keeps your desk tidy VESA Quick-Release: Allows fast and easy monitor attachment/detachment Two Mounting Options: Desk clamp or grommet mount Recommended Desk Thickness: Clamp: 1080mm, Grommet: 10-35mm Integrated Spring Tension Mechanism: Ensures precise weight adjustment 180° Rotation Limiter: Prevents the monitor arm from hitting walls or other screens Certified by IGR (Institute for Health and Ergonomics)
HDMI to DVI female-male adapter with gold-plated connectors, bulk packageHigh-Definition Multimedia Interface (HDMI) is the first industry-supported digital audio/video interface.HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.Digital Video Interface (DVI) is a high-quality digital video standard and a part of HDMI interface.
High-Definition Multimedia Interface (HDMI) digital audio/video interface cableSupports data transfer bandwidth of up to 10 Gigabits/secAllows bi-directional communication between smart HDMI devicesSupports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 HzSupports HDMI Ethernet Channel 100 Mbps function (HEC)Supports Audio Return Channel technology (HARC)
Original part number PC-186-VDE-10M Product name Gembird power cord with VDE approval 10 meters Producer Gembird Class of product Cables - others Wire type Power cable 16A/230V Plug 1 type EURO plug (16A) Plug 2 type IEC320 C13 Colour Black Length 10 m Additional information Wires: profile area 1,00 sq.mm
Original part number CCP-USB2-AM5P-1 Product name Gembird USB 2.0 A-plug MINI 5PM 1ft cable, bulk packing Producer Gembird USB plugs 1x male USB A-type1x male mini-USB CANON-type (5-pin) Cable length 0.3 m Other information Other information Gold plated plugs No Cable colour Black Additional information Cable length 30cm
