Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
DST-Pro 5K XT, USB-C Laptop Docking Station with Triple Display (4K) or Single Display (5K) & 100W Pass-Through 5K DP, HDMI, PD 3.0 100W, USB 3.2 Gen 1, Gigabit, SD, MicroSD, Audio - Connects an HDMI and/or up to 2 DisplayPort displays, USB peripherals, Gigabit Ethernet, an Audio device, an SD card and power over a single cable - Supports 5K 60Hz for a single DisplayPort display or 4K 60Hz for a single HDMI display - Integrates 4 port USB SuperSpeed 5Gbps Hub (3 x Type A, 1 x Type C) - Allows USB Power Delivery up to 100W to charge the laptop while using the DST-Pro 5k XT Dimensions 180x77x18mm Weight 0.439 kg
Ion A3 Laminator • User-friendly A3 laminator for home environments • Laminates documents and photos in 80 - 125 micron pouches • Ready to laminate after 4 minutes warm-up • Release lever disengages pouch for document re- alignment or removal • Sleep mode is activated after 30 minutes • Includes 10-pouch laminating starter kit Model name ION A3 Binding type Plastic comb, Max pouch thickness 125 micron Colour White / Grey
Product Features: 18Gbps high-speed bandwidth. Backward compatible. Design for transmitting the 4K@60Hz Ultra HD display signal in a long distance, as specified in HDMI 2.0. With HDR, greater detail and contrast in both the dark and bright parts in the same image as well as an extended color space. With ARC, you are able to let an HDMI-connected TV send audio data upstream to a soundbar or audio receiver. Support lossless HDMI audio formats like Dolby True HD and DTS-HD etc. Supports EDID incl. self-detecting function. Made with corrosion-resistant gold-plated connector and 7-layer shielding structure. High resistance against surrounding electromagnetic interference. Safe for everyone via the nil-radiation environment. Hardware & Dimension: Material: Gold-plated connector Color: Black Cable Length: 5M (C11041BK)/ 10M (C11043BK)/ 15M (C11045BK)/ 20M (C11046BK) Cable OD: 8mm (5M 10M) / 9.5mm (15M) / 9mm (20M) Package Contents:1 x 4K 60Hz Extra Long HDMI Cable 1 x User Manual
4-port USB 3.1 (Gen 1) Type-C hub YOUR GATEWAY TO USB WORLD USB 3.1 ultra-high data transfer speed up to 5 Gbps Powered hub: perfect for peripherals that need more power Suitable for USB Type-C OTG devices and PC Windows 11 compatible
IADP4K adapter The iBOX IADP4K adapter converts the DisplayPort signal into an HDMI signal. It allows you to connect two devices with different ports - a device with a DisplayPort port to a device with an HDMI port. See even more! Get the highest image quality with 4K support. The adapter supports the Audio-Pass-Through function, which allows you to transmit audio and video signals via HDMI.
FPMA-D550SBLACK Neomounts by Newstar monitor desk stand Neomounts by Newstar FPMA-D550SBLACK full motion desk stand for 10-32" monitor screen, height adjustable - Black
Connect your USB-C device to the Ethernet with this easy-to-carry, Plug-and-Play Ethernet adapter. Get the fast Internet speed of a wired Ethernet connection for fast and reliable streaming and downloads.
Discover the viewing and listening experience with Unitek's HDMI cable, designed to elevate your home entertainment system. This high-speed HDMI cable with Ethernet offers not just the convenience of connecting your devices but also ensures that you enjoy movies, games, and music in high definition. With features like 4K60Hz support, HDR 10 compatibility, and 7.1 channel Surround Sound, every visual and audio detail is delivered with precision. The cable's flat design makes it easy to manage, while the gold-plated connectors ensure a reliable connection and superior signal quality. Additionally, the inclusion of HDMI Ethernet Channel (HEC) and Audio Return Channel (ARC) simplifies your setup, reducing the need for additional cables. Whether you're setting up a home theater or looking for a reliable cable for everyday use, Unitek's HDMI cable is the perfect solution.
Adjustable wall-mounted monitor arm for 3 monitors Set your screen perfectly Lightweight and tiltable design Monitor wall mount with single arm for 3 monitors The arm rotates, extends and retracts, and tilts to change the reading angle Monitor mounting strip for mounting 3 monitors side by side Allows easy, ergonomic positioning to reduce workload Works with almost any LCD monitor (max. 27") Durable, adjustable gas spring suitable for monitors weighing 16 kg Built-in cable management keeps your workspace organized and tidy
The DIGITUS USB-C to USB-C cable is designed to enhance your data transfer capabilities with a 40 Gbps speed. Measuring 25 cm in length, this external storage enclosure is perfect for M.2 solid state drives, providing a toolless experience for easy accessibility. Crafted from aluminum, the enclosure ensures durability while effectively dissipating heat during operations. With a built-in cooling fan and a clear LED indicator, users can monitor performance effortlessly. This solution is compliant with Plug-and-Play standards, making setup straightforward, and it supports up to 8 TB capacity for extensive storage needs. Operable in a wide range of temperatures from 5 °C to 50 °C, it is suitable for various environments, ensuring reliable performance under diverse conditions.
Holder for Notebooks up to 17" non-slip and height-adjustable ESSENTIAL MATERIAL: The notebook holder is made of high-quality aluminium through and through. The extremely careful workmanship and the smoothly moving joints are evidence of a high-quality product ALWAYS AT EYE HEIGHT: The Z-shaped design allows the notebook screen to be individually adjusted to eye level. This supports an ergonomic posture and is easy on the neck and shoulders SMOOTH-FREE: Silicone strips are attached to the top and bottom edges of the shelf to ensure that your laptop rests securely on the shelf and does not fall off even when tilted LIABLE: The laptop stand can easily support a weight of up to three and a half kilos in all settings. If only a low angle of inclination is selected, even more than 3.5 kg is possible WELL COOLED: A large part of the shelf surface is perforated with slots. This ensures that the IB-NH300 is sufficiently cooled when the notebook is in place and even during intensive use
The NZXT H7 Series GPU bracket kit is for enthusiasts looking to showcase their graphics card. It includes a vertical GPU bracket that allows for a display of your GPU, making it a focal point of your setup. The included PCI-e riser cable ensures a seamless installation, providing reliable connectivity and optimal airflow within your case. Crafted from durable steel, this bracket kit offers aesthetic appeal and strength, ensuring your GPU is secure and well-supported.
The AXAGON PCEU-430RS PCI-Express card adds four external USB-A 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four USB ports are taken out to the bracket. You can connect four different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 4x external USB 5Gbps port with USB A-F connectors. USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
HDMI 2.1 active optical cable HDMI optical cables allow for lossless transmission of audio/video signals over vast distances. Thanks to the use of optical fibres as conductors, they are extremely thin, which facilitates cable routing and additionally provides resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows the transmission of 8K quality video at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, the resolution can be increased up to a maximum of 10K!
Chatting with your besties, streaming in the evening, sitcoms, and chill... You set the action plan and the ENDORFY Atlas Single keeps the screen. And it handles it pretty well - with a load capacity of 8 kg, it's not afraid of even larger, 27-inch screens. The ENDORFY Atlas Single is compatible with 75 × 75 mm and 100 × 100 mm VESA standards. You can also easily adjust the height of the screen, rotate it left or right (from -90° to +90°), and tilt it up or down (from -35° to +35°). Mounting the whole thing takes just a few seconds - just screw the clamp onto the desk and you're done. Your ENDORFY Atlas Single is ready for action.
Desk arm for two monitors (adjustable), 17\"- 32\" up to 9kg PERFECTLY POSITIONED MONITOR Lightweight and compact design Double arm desk mount for two monitors The arms allow you to swivel, extend, retract or tilt the display and allow you to rotate displays from landscape to portrait mode etc. Durable, sturdy desk clamp for easy and secure fixing on a desk Practical clips to organise cables in the arm Works with almost any LCD monitor (max. 32") Compatible with VESA (100 x 100 mm and 75 x 75 mm)
Messgerät für GPU-Stromverbrauch, 3x 8-Pin PCIe auf 1x 12VHPWR (reverse), integriertes OLED-Display, Messung der Leistungsaufnahme, Aufzeichnung des Stromverbrauchs, optimierte Kabelführung
STRIMER WIRELESS 24P – Controller Included L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
6 in 1 USB-C Hub: UH6120C turns a single USB-C port into 6 ports with a 4K@60Hz HDMI, 1 Gbps ethernet, 100W Power Delivery, 1× USB-C Data Ports, 2× USB-A Data Ports. Ultra High-Definition Media Display: Connect to an external monitor via the 4K@60Hz HDMI port for a stunning ultra high-definition experience. Stable Gigabit Connection: This compact gadget provides stable Gigabit Ethernet connectivity for your ultrabook, Chromebook, laptop, or desktop. Powerful 100W Fast Charging: Plug the charging cable into UH6120C and continuously deliver up to 100W of power to your PC while transferring files or streaming media. 5 Gbps SuperSpeed Data Transfer: UH6120C adds three USB 3.0 ports to your device, enabling simultaneous use of multiple USB devices. Easy to Use with Plug & Play: Simply plug in and start using in seconds, thanks to driver-free install with Mac OS X El Capitan Version 10.11.6 and later, Windows 11/10/8.1, Linux OS, iPad OS, iOS, Android, Chrome OS, and Nintendo OS.
The Iiyama MD-WM8060 mounting kit represents a versatile and reliable solution for mounting flat panel displays. Crafted with precision by Iiyama, this universal wall mount is designed to accommodate a broad spectrum of flat panel sizes, thanks to its adaptable flat panel mount interface that ranges from 100 x 100 mm to 800 x 600 mm. Whether for home entertainment systems, professional workspaces, or public displays, the MD-WM8060 ensures your screen is securely and elegantly displayed.Engineered for strength, the mounting kit boasts a robust construction capable of supporting displays weighing up to 125 kg. This ensures that even the heaviest of screens can be safely mounted, providing peace of mind and a clean, streamlined look. The MD-WM8060 is not just about strength and compatibility; it's also designed for ease of installation, making it a preferred choice for both DIY enthusiasts and professional installers.
The Neomounts WL90-325BL1 is a full motion height adjustable wall mounted workstation for screens up to 32", keyboard and mouse. The mount can support screens up to 9 kg (curved: 6 kg), while the keyboard tray can support max. 1 kg. The versatile tilt (70°), rotate (360°) and swivel (180°) technology allows the monitor arm to change to any viewing angle to fully benefit from the capabilities of the screen. The keyboard tray includes a wrist support and mouse pad for optimum comfort. The wall mounted workstation has a large height adjustment range of 44-95 cm. To ensure quick repositioning and the most optimal working position, the WL90-325BL1 features gas spring height adjustment for both the monitor arm and keyboard tray arm. The smart cable management system ensures a secure routing of the cables. The WL90-325BL1 is suitable for screens that are compatible with VESA hole pattern 75x75 or 100x100 mm and is equipped with a Quick-release VESA system for fast and easy installation. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available.
With the LogiLink multifunction cart, you can easily mount your TV monitor without drilling holes in the wall. The BP0163 is a classy and perfect solution for office presentations. With the four lockable heavy-duty castors, the display cart allows you to place your TV in the room comfortably and easy. You can also tilt the monitor without any tools or adjust the height with an effortless spring lock.
Universal pole bracket for LED, LCD monitors with a screen diagonal of 17 to 32 inches and a maximum weight of 8 kg. The arm allows you to adjust the tilt angle and rotate the monitor. This allows you to position the monitor in the optimal viewing position, which increases comfort while working and reduces strain on the spine and eyes. The removable VESA plate allows quick and easy mounting of the monitor to the stand. Compatible i.e. with LED & LCD Monitors by Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, iiyama, Acer, Gigabyte, KTC.
