Toote kirjeldus inglise keeles:Sleeved cables are not just for modding experts, at least not anymore. In the past, only absolute enthusiasts tackled the elaborate and rather risky sheathing of the thin and thick wires in the PC - and sometimes elevated the craft to the art. Thanks to Super Flower, every PC user with the right power supply can be an artist today! Because the complete sets, which are offered by Super Flower for special power supply series with removable cables, are extremely high quality!Overview of the Super Flower Sleeve Cable Kit Pro:High-quality cable set with single-core sleevesTextile wrapping ensures high flexibility & perfect look4 × 6 + 2-pin PCIe & 4 × dual-6 + 2-pin PCIe connectors for graphics cards2 × Quad SATA / 2 × Triple 4 Pole Molex / 1 × 20 + 4-pin / 2 × 4 + 4-pinCompatible with selected Super Flower and EVGA power suppliesSleeved cables ensure an upgraded appearance of the gaming systemEvery single strand of a wire harness in this kit is surrounded by its own sleeve, which looks fantastic and ensures maximum flexibility of the entire cable. Stubborn cables that simply do not want to go where they should go? Old news! The special textile fabric meets the highest demands of experienced modders and is also softer and more flexible than nylon sheaths, but nevertheless incomparably tight woven and therefore one hundred percent opaque. The processing of Super Flowers Cable Kits is impeccable, which is visually and haptically pleasant immediately when you take the cable for the first time in the hand. Also an absolute plus compared to some competitors: Super Flower dispenses completely with heat shrink tubing at the junctions between wires and plugs. Instead, the colored textile covers go directly into the black connectors, so that no stale heatshrinks disturb the perfect visual impression. A big advantage over jacketed extension cords in the Super Flower Cable Kits is that they directly replace the standard connection cables included with the compatible modular power supplies. So to get a uniform and very high-quality cable look, not only the original cable must be installed hidden in the housing, which are always at least at the interface to the power supply to see a little. The Cable Kit offered here is a set of 15 cables whose individual wires are sleeved with textile fabric. The set is compatible with Leadex Titanium, Leadex Platinum and Leadex Gold Super Flower power supplies, in addition to SuperNOVA T2, SuperNOVA P2, SuperNova G2 and SuperNova G3 EVGA power supplies. The exact number of cables and connections and their length can be found in the technical details. Notes: Please note that the cable set offered here can only be used for the power supply models listed below! Technical details:Material Sleeves: TextileCompatibility (Power Supplies ): Super Flower Leadex Titanium (1600, 1200, 1000, 850, 750) Super Leadex Flower Platinum (2000, 1600) Super Leadex Gold (1.600) EVGA SuperNOVA T2 Series (1.600 T2) EVGA SuperNOVA P2 Series (1.600 P2, 1,200 P2, 1,000 P2) EVGA SuperNOVA G2 Series (1,600 G2, 1,300 G2, 1,000 G2, 850 G2, 750 G2, 650 G2, 550 G2) EVGA SuperNOVA G3 Series (1,000 G3, 850 G3, 750 G3, 650 G3 , 550 G3)Cable: 1x 20 + 4-pin ATX12V / EPS12V (650 mm without plug) 2x 4 + 4-pin ATX12V / EPS12V (750 mm without plug) 4x 6 + 2-pin PCIe (750 mm without plug) 4x Dual-6 + 2-pin PCIe (1st / 2nd connection: 750/900 mm without plug) 2x Quad-SATA (1st / 2nd / 3rd connection: 550/650/750/850 mm without plug) 2x Triple-4 Pol-Molex (1st / 2nd / 3rd connection: 550/650/750 mm without plug)
Toote kirjeldus inglise keeles:Sleeved cables are not just for modding experts, at least not anymore. In the past, only absolute enthusiasts tackled the elaborate and rather risky sheathing of the thin and thick wires in the PC - and sometimes elevated the craft to the art. Thanks to Super Flower, every PC user with the right power supply can be an artist today! Because the complete sets, which are offered by Super Flower for special power supply series with removable cables, are extremely high quality!Overview of the Super Flower Sleeve Cable Kit Pro:High-quality cable set with single-core sleevesTextile wrapping ensures high flexibility & perfect look4 × 6 + 2-pin PCIe & 4 × dual-6 + 2-pin PCIe connectors for graphics cards2 × Quad SATA / 2 × Triple 4 Pole Molex / 1 × 20 + 4-pin / 2 × 4 + 4-pinCompatible with selected Super Flower and EVGA power suppliesSleeved cables ensure an upgraded appearance of the gaming systemEvery single strand of a wire harness in this kit is surrounded by its own sleeve, which looks fantastic and ensures maximum flexibility of the entire cable. Stubborn cables that simply do not want to go where they should go? Old news! The special textile fabric meets the highest demands of experienced modders and is also softer and more flexible than nylon sheaths, but nevertheless incomparably tight woven and therefore one hundred percent opaque. The processing of Super Flowers Cable Kits is impeccable, which is visually and haptically pleasant immediately when you take the cable for the first time in the hand. Also an absolute plus compared to some competitors: Super Flower dispenses completely with heat shrink tubing at the junctions between wires and plugs. Instead, the colored textile covers go directly into the black connectors, so that no stale heatshrinks disturb the perfect visual impression. A big advantage over jacketed extension cords in the Super Flower Cable Kits is that they directly replace the standard connection cables included with the compatible modular power supplies. So to get a uniform and very high-quality cable look, not only the original cable must be installed hidden in the housing, which are always at least at the interface to the power supply to see a little. The Cable Kit offered here is a set of 15 cables whose individual wires are sleeved with textile fabric. The set is compatible with Leadex Titanium, Leadex Platinum and Leadex Gold Super Flower power supplies, in addition to SuperNOVA T2, SuperNOVA P2, SuperNova G2 and SuperNova G3 EVGA power supplies. The exact number of cables and connections and their length can be found in the technical details. Notes: Please note that the cable set offered here can only be used for the power supply models listed below! Technical details:Material Sleeves: TextileCompatibility (Power Supplies ): Super Flower Leadex Titanium (1600, 1200, 1000, 850, 750) Super Leadex Flower Platinum (2000, 1600) Super Leadex Gold (1.600) EVGA SuperNOVA T2 Series (1.600 T2) EVGA SuperNOVA P2 Series (1.600 P2, 1,200 P2, 1,000 P2) EVGA SuperNOVA G2 Series (1,600 G2, 1,300 G2, 1,000 G2, 850 G2, 750 G2, 650 G2, 550 G2) EVGA SuperNOVA G3 Series (1,000 G3, 850 G3, 750 G3, 650 G3 , 550 G3)Cable: 1x 20 + 4-pin ATX12V / EPS12V (650 mm without plug) 2x 4 + 4-pin ATX12V / EPS12V (750 mm without plug) 4x 6 + 2-pin PCIe (750 mm without plug) 4x Dual-6 + 2-pin PCIe (1st / 2nd connection: 750/900 mm without plug) 2x Quad-SATA (1st / 2nd / 3rd connection: 550/650/750/850 mm without plug) 2x Triple-4 Pol-Molex (1st / 2nd / 3rd connection: 550/650/750 mm without plug)
Other features: HighSpeed HDMI™ for 3D and Ultra HD up to 4K @ 50/60 Hz (2160 p) gold-plated contact surfaces for optimum signal transmission high-quality metal connectors optimised bend protection and flexible cable sleeving Connector type: HDMI™ male (type A) Connector 2: HDMI™ male (type A) Cable type: Round cable AWG wire size: 30 Cable material: CU (copper) Cable length: 5 m Type: HDMI to HDMI Embeeded battery: No WEEE tax: No Packing quantity: 1 pc(s) Gross weight: 0.42 kg Gross depth (mm): 320 mm Gross width (mm): 200 mm Gross height (mm): 20 mm Volume (m3): 0.00128 m³ Net weight: 0.38 kg Tare weight (kg): 0.04 kg
Kas vajate tõeliselt eredaid LED-e? Nad on väga säravad! Need lähevad hõlpsasti breadboard/makettplaadile ja lisavad teie projektile selle täiendava särtsu. 5mm läbimõõt 465 nm lainepikkus 3,2-3,8 V Pinge, voolutugevusel 20 mA 6000 mcd heledus Vaatenurk: ±10 kraadi Maksimaalne pidev vool: 30mA
Kasutage oma regulaatoritest, transistoridest ja muudest TO-220 pakendatud kiipidest maksimumi, kinnitades jahutusradiaatori külge. Teie transistor või regulaator võib reklaamida, et see talub suuri voolusid, kuid kui see korrutada pingelangusega, võib võimsus olla palja kiibi jaoks liiga kõrge! Enamik TO-220-sid võib ilma valamuta kulutada umbes 2 W väärtuse. See lihtne ja hõlpsasti kasutatav 23 °C/W radikas võimaldab põletada umbes 4 vatti võimsust läbi TO-220 (eeldades, et ümbritseva õhu temperatuur on 25 °C ja maksimaalne suletustemperatuur on 150 °C). Pole vaja kruvisid ega termopastat. Kaal: 1,88 g Mõõdud: 21,5 mm x 10,2 mm x 19,2 mm
Standardne A–mikro-B USB-kaabel USB 1.1 või 2.0 jaoks. Selle asemel, et kaabel pistikust otse välja tuleks, on täisnurkne painutus. Arvasime, et see võib olla hea paar Raspberry Pi mudeli A või B jaoks, kuna kaabel ei jää nii kaugele välja. Meil on kaablid eriti tugeva 24 AWG toitejuhtmega ja 28 AWG , nii et see sobib eriti hästi energiat nõudvate seadmete jaoks, nagu mikroarvutid ja telefonid. Seda kaablit ei soovitata mudeli B+ jaoks – see kaabel ei sobi sest takistab HDMI porti. Pikkus: 1,42m Kaal: 56g
Kirjeldus: Solenoidid on suurepärane viis lineaarse liikumise esilekutsumiseks lülitite ja hoobade lükkamisel, tõmbamisel või juhtimisel. Andmelehe järgi on selle solenoidi nimipinge 36 V, kuid need töötavad ka 12 V juures. Tänu 10 mm laiusele sobivad need solenoidid suurepäraselt igasuguste liikumisrakenduste jaoks, nagu uksesulgude käivitamine või lihtsalt inimeste torkimiseks. 12-voldise pinge korral võtavad need solenoidid 650 mA, 36 volti puhul aga 1,85 A. Märkus . Andmelehel on märgitud 25 mm välja ulatuv pikkus, kuid me oleme mõõtnud 10 mm.
Kuna SD- ja MMC-mälu hinnad langevad, on õige aeg massmälu ja andmelogimiseks. See jaotusplaat võimaldab teil eraldada SD/MMC-pesa standardse 0,1-tollise 10-kontaktilise päisega. Sobib suurepäraselt leivalaua ja muu sarnase jaoks. Plaat on täielikult kokku pandud ja testitud, nagu näidatud. Mõõdud: 1,3x1,5"
See moodul kasutab Nordic Semiconductor'i uusimat 2,4 GHz transiiverit nRF24L01+. See transiiver IC töötab 2,4 GHz sagedusalas ja sellel on palju uusi funktsioone! Võtke kõik nRF2401A lahedad omadused ja lisage mõned lisapipeliinid, puhvrid ja automaatne tagasisaatmisfunktsioon - väga kena! Pange tähele: me varustame neid plaate nüüd nRF24L01+-ga. IC "+" versioonil on paranenud ulatus, tundlikkus ja andmesagedus. Käskude komplekt on tagasiulatuvalt ühilduv algse nRF24L01-ga. Mõõtmed: 20,3 x 22,8 mm Omadused: Sisseehitatud 3,3 V LDO regulaator (3,3 kuni 7 V toide lubatud). Pardal olev keraamiline 2,4 GHz antenn 100m raadius 250kbps juures 250kbps kuni 2Mbit andmesagedus Automaatne kinnitamine Automaatne uuesti edastamine Multiceiver - 6 andmesidetorustikku 32 baidi eraldi TX ja RX FIFO-d 5V tolerantsed sisendviigud Tarkvaraga valitav kanal 2400MHz kuni 2525MHz (125 valikulist kanalit) Väliste komponentide minimaalne arv Pins välja murdunud : VCC, CE, CSN, SCK, MOSI, MISO, IRQ, GND Palju rakendusjuhiseid ja tuge Nordic Semiconductori veebisaidil
XBee raadioside on suurepärane võimalus lisada oma Arduino projektile juhtmevaba side ja nüüd on see SparkFun XBee Shieldi abil veelgi lihtsam. Shieldi vormifaktor sobib otse mis tahes Arduino standardse jalajäljega dev-plaadiga ja varustab selle traadita side võimekusega, kasutades populaarset XBee moodulit. See seade töötab kõigi XBee-moodulitega, sealhulgas seeria 1 ja 2, standard- ja Pro-versioonidega. XBee jadapinid (DIN ja DOUT) on ühendatud SPDT-lüliti kaudu, mis võimaldab valida ühenduse kas UART-pinide (D0, D1) või Arduino mis tahes digitaalsete pinsidega (D2 ja D3 vaikimisi). Toide võetakse Arduino 5V viigult ja reguleeritakse pardal 3,3VDC-ni, enne kui see XBee-le antakse. Kilp hoolitseb ka XBee DIN- ja DOUT-pinide taseme muutmise eest. Viimases versioonis on diood-tasemešifter asendatud tugevama MOSFET-tasemešifteriga. Plaat sisaldab ka valgusdioode, mis näitavad XBee DIN-, DOUT-, RSSI- ja DIO5-pinide toite ja aktiivsust. Arduino reset-nupp on kilbil välja toodud ja prototüüpimiseks on olemas 9x11 ruudustik 0,1" aukudega. Kilbi ei ole paigaldatud päidetega; soovitame Arduino Stackable Header Kit'i. XBee-moodul ei ole samuti kaasas.
