Varia lisaseadmed

HDMI cable, 15m, black, gold-plated, v1.4 high speed, ethernet / 3D CL-200 Support Ethernet up to 100 Mb / sec. Support 3D and Deep Color Support audio return channel Support Dolby TrueHD multi-channel audio and DTS-HD Master Audio Support high resolutions up to 4K x 2K (max 4096x2160p24) 24k gold-plated connectors Full shielding of signal wires resistant to external interference OFC oxygen-free conductors with a high degree of purity (99.96%) No losses in the transmission of high image and sound quality 28AWG, OD: 7,3 mm Packaging: scroll + label Application example: Image transfer from a computer, console, laptop, tuner, DVBT to TV AWG American wire gauge , also known as the Brown & Sharpe wire gauge, is a logarithmic stepped standardized wire gauge system used in North America. The cross-sectional area of each gauge is an important factor for determining its current-carrying ampacity. Increasing gauge numbers denote decreasing wire diameters.OD parameter defining the diameter of the cable.

ASUS ROG Xbox Ally (2-in-1) Premium. Karbi tüüp: Hardshell ümbris, Brändiühilduvus: ASUS, Toote värv: Must. Laius: 155 mm, Sügavus: 320 mm, Kõrgus: 100 mm

Der Voyager 1472g ist ein leistungsfähiger Barcode-Scanner für den Einsatz an Kassensystemen oder Servicestellen. Er scannt auch beschädigte oder mit schlechter Qualität erstellte Barcodes zuverlässig und schnell. Dabei erkennt er auch Codes, die z.B. auf einem Smartphone-Display vorgelegt werden. Dieser kabellose Scanner mit Bluetooth-Schnittstelle und einer Reichweite von bis zu 30 Metern übersteht bis zu 30 Stürze aus einer Höhe von 1,8 Metern - er ist damit auch höheren Beanspruchungen gewachsen.

Extender over Cat6 HDMI 4K/60Hz via IP 1G or up to 120m/200m with PoE, max. 253 receivers, IR control - Set This device enables HDMI AV signal transmission in UHD resolution (4K/60Hz) over distances up to 200 m in a point-to-point connection using a CAT6 network cable (or higher). With PoE support, no external power supply is required. The HDMI IP Extender Set 4K/60Hz allows HDMI AV signals to be transmitted in ultra-high 4K resolution (4096x2160p at 60Hz) over long distances of up to 200 meters-thanks to an efficient point-to-point connection using a CAT6 or higher network cable. The set is fully powered via a PoE network switch; no external power adapters are needed. IP expansion allows flexible system scaling and supports up to 253 receivers (displays) for point-to-multipoint transmission. Additionally, the existing 1G network infrastructure can be used, allowing unlimited signal range by cascading through network switches. For even greater flexibility, additional receivers (RX) are available separately (model: DS-55354). Outstanding image quality is always maintained: with low latency of only 150220 ms, the transmission is smooth and razor-sharp in UHD. Another practical feature is the integrated IR interface, which enables remote control of the input source directly from the output display. The device is also suitable for wall mounting, saving space. Ideal for professional AV applications, home theater setups, or corporate use, this HDMI IP extender set combines top-quality transmission with maximum flexibility. Key Features: Long-range transmission: AV signal transmission via CAT6 (or higher) cable up to 200 m - point-to-point connection IP expansion capability: Supports up to 253 receivers (displays) - point-to-multipoint connection Flexible and efficient via IP: Uses existing 1G network infrastructure or additional 1G network switches to transmit signals over unlimited distances - cascading Expandable options: Additional receivers (RX) available separately (model: DS-55354) Flexible installation with PoE: Fully powered via PoE network switch - no external power supply required Exceptional image quality: UHD transmission up to 4K/60Hz (4096x2160p) with low latency of 150-220 ms IR interface: Allows remote control of the input source from the output display Supports CAT6 or higher network cables Wall-mountable design

HDMI 4K/60Hz Fiber Optic Extender with KVM USB 1.1 over IP 1G or up to 40 km/300 m, max. 253 Receivers, HDMI Loop-Out, Audio Set This kit allows transmission of UHD HDMI signals (4K/60Hz) over distances of up to 40 km (single-mode) / 300 m (multi-mode) in point-to-point configuration and offers KVM functionality on the receiver side. The set enables high-resolution 4K/60Hz (3840x2160p) AV signal transmission over long distances using fiber optic cables. Both single-mode (SM) and multi-mode (MM) fibers are supported. In point-to-point mode, signals can be transmitted losslessly up to 40 km (single-mode) or 300 m (multi-mode). The device also supports point-to-multipoint connections, allowing distribution of signals to up to 253 receivers (displays). By utilizing 1G network switches and existing 1G infrastructure, signals can be transmitted over unlimited distances through cascading, enabling flexible system expansion. For multi-display projects, the extender set can be expanded with additional receivers (RX), sold separately (model: DS-55349). The system is compatible with LC and SC SFP modules, which are available separately (LC single-mode (SM): DN-81002, LC multi-mode (MM): DN-81000). Support for both single-mode and multi-mode fiber cables ensures high flexibility for various applications. A standout feature of this extender is the receiver-side KVM function, allowing direct control of the source using a mouse and keyboard. Additionally, a 3.5 mm stereo jack is provided for separate audio output, ensuring optimal sound transmission. These advanced features make the HDMI fiber optic KVM extender ideal for data centers, conference rooms, digital signage, broadcast environments, and industrial applications that require stable, lossless, high-resolution AV transmission over long distances. Key Features: Long-range transmission: AV signal over fiber - single-mode up to 40 km, multi-mode up to 300 m (point-to-point) IP-based scalability: Supports up to 253 receivers (displays) - point-to-multipoint Flexible and efficient over IP: Utilizes existing 1G network infrastructure or 1G switches for unlimited distance transmission via cascading Expansion options: Additional receivers (RX) available separately (DS-55349) SFP modules sold separately: LC single-mode (SM): DN-81002, LC multi-mode (MM): DN-81000 Wide compatibility: Supports LC and SC SFP modules and both single-mode and multi-mode fiber cables Exceptional image quality: UHD transmission up to 4K/60Hz (3840x2160p) with low latency of 80140 ms Receiver-side KVM: Connect mouse and keyboard to control the source directly Additional audio output: 3.5 mm stereo jack for separate sound transmission HDMI Loop-Out: Connect a local monitor to the transmitter (TX)

UNITEK M2 NVME USB4 SSD ENCLOSURE 40GBPS + COOLING

2xNumber of displays supported | Maximum weight capacity (per display) 8 kg | Maximum weight capacity 16 kg | Maximum screen size 81.3 cm (32") | Mounting type Desk | Minimum VESA mount 75 x 75 mm | Maximum VESA mount 100 x 100 mm | Height adjustment Yes | Tilt adjustment Yes | Swivelling Yes | Rotating Yes | Colour Black | Orientation Landscape/Portrait