Tootja: Gembird Tootegrupp: muu controllers/adapters BUS tüüp: PCI-E 1x sisemised ühendused: info puudub välised pordid: 2 x serial (RS-232) toetatud operatsioonisüsteemid: Windows 7, Windows 8, Windows 10 komplekti kuuluvad: madala profiiliga bracket madala profiiliga kaart: Jah pikkus: 63 mm laius: 100 mm kõrgus: 38 mm Netokaal: 104 g Lisaandmed: kiibistik
Single Arm Wall Mount - Fully independent adjustable monitor arm with innovative gas spring technology allows for effortless monitor adjustment. - Intuitive cord management system helps minimise clutter. - Mounts to wall and easily tucks into tight places. - Holds up to 42” monitor (up to 30kgs) with a lift range of 28cms. - Specifications: +5° / -15° Tilt, +/- 90° Pan, +/- 3° Rotation - VESA 75 x 75, 100 x 100, 200 x 200 and 100 x 200 compliant
Suure jõudlusega aktiivne kaabel, mis tagab pikendatud 8 m pikkuse ühenduse arvuti ja USB 3.0 seadme vahel Saab kasutada eraldiseisvana või osana Lindy Active Extension System Pro-st, et luua kohandatud pikendussüsteeme üle 40 m (sõltuvalt kasutatud kaablitest) Toetab täielikku USB 3.0 SuperSpeed ribalaiust kiirusega 5Gbps Lihtne kasutada - ühendab seadme olemasoleva USB-kaabliga (maksimaalselt 5 meetrit) 2-aastane garantii
Selle korraliku väikese seadmega saavad süsteemiadministraatorid füüsiliselt takistada kasutajatel ühendamast pliiatsiseadmeid, MP3-mängijaid ja muid USB-massmäluseadmeid oma arvutitega, et andmeid kopeerida, viiruseid sisse viia jne. USB-pordi blokeerija koosneb kombineeritud "võtme" ja "luku" komplektist, mis ühendatakse USB-porti. Kasutamiseks ühendage lihtsalt "klahvilukk" pessa ja vabastage riiv – lukk jääb paigale! Eemaldamiseks ühendage võti lukuga tagasi. Lihtne! Blokeerib füüsiliselt juurdepääsu USB-pordile Kiire ja lihtne kasutada Koosneb 4 lukust ja 1 võtmest Saadaval 5 erinevat värvikoodi versiooni: roosa, roheline, sinine, oranž, valge Iga võti töötab ainult sama värvi lukuga Saadaval ka 10 tk pakendis (ilma võtmeta) Garantii 2 aastat
Cotton braided 8-pin cable with metal connectors, 1.8 m, black, blister - Perfect for connecting or charging Apple iPhone - Gold plated connectors for a reliable connection - Stylish design with cotton braiding and premium quality metal connectors Length 1.8 m Connectors USB 2.0 to 8-pin male connector, gold-plated, Colour Black
Metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-MSA connects up to four USB devices to laptop or computer. It also offers USB port shutdown and Charging hub feature. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. Each USB port can be turned off / on using the button. This makes it easy to disconnect unnecessary devices without having to disconnect them from the USB hub. Each USB-A port has a blue LED indicating port is turned on or off. After connecting the hub, all LEDs are on = ports are enabled, LED is off = port is disabled. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. Thanks to the Charging hub function, mobile devices can be charged even without a connection to a computer. An unused charger will turn this USB hub into a charging hub for free. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. 4x Off/On button with LED indication. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 102 x 31 x 10 mm. Weight 39 g (incl. cable). USB cable length 20 cm. The hub power mode via USB cable (bus power): The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.6A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connection to the PC (charging hub): After power off the connected PC or without connection to the PC the hub works with power supply via USB wall charger as a separate charging USB hub. Just plug a standard wall charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the external wall charger). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
AXAGON PCEU-43RS PCI-Express card adds four external USB 3.2 Gen 1 ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four SuperSpeed USB ports are taken out to the bracket. The dual power supply of the controller enables standard power supply of the controller and connected USB peripherals via the PCI-Express bus as well as optional power supply from the PC power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility, high performance and UASP support. Low profile bracket is included in the package for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0. Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s. Output: 4x external USB 3.2 Gen 1 port with USB type A-F connectors. SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed). When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Standard power supply for the controller and connected USB peripherals via the PCI-Express bus. In this power supply mode, the PCIe controller can handle up to three magnetic 2.5" external disks simultaneously. Optional power supply from PC source via SATA power connector. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express controller with a standard bracket, low-profile bracket multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The AXAGON ADR-207 active USB 2.0 extension cable with a length of 7.5 meters is ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and others. The active USB repeater cable amplifies the transmitted signal and allows you to connect a USB device at a significantly greater distance than a passive cable would allow. The cable's range can be further extended by connecting several cables in sequence. A great advantage of the ADR-207 cable is the integrated connector for additional power supply. In most cases, power via the USB bus is sufficient, but for devices with higher power consumption, USB power may be insufficient over longer distances, and an external power supply from the mains can solve this problem. The exceptionally compact body of the repeater cable allows trouble-free use in electrical installation ducts or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal unwanted interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-QC18. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, macOS, Linux, Chrome OS and Android. Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 / 2025 and later (all 32- and 64-bit Windows versions supported). Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active repeater 7.5 m long, USB-A / 3.5 mm power cable, printed installation manual in CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Ideal for use with today’s Ultrabooks and thin-and-light laptops, Transcend’s SuperSpeed USB 3.0 Hub transforms a single USB 3.0 port into four, instantly expanding the number of high-performance USB 3.0 devices you can connect to your computer at the same time. With the included power adapter, the Hub3 can supply high output currents of up to 2A via its dedicated fast charging port. This allows the Apple iPad and other portable devices with demanding power requirements to charge much quicker than using a standard USB port.
Original part number CC-DPM-DVIM-3M Product name Gembird cable Displayport (M) - > DVI-D (24+1) 3m Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video DisplayPort plugs 1x male DisplayPort DVI plugs 1x male DVI-D (Dual Link) /24+1/ Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information Enables to connect a DVI display to a DisplayPort video sourceMax. resolution: 1920 x 1080 pixels
Original part number AK-1201-B Product name Lanberg cable management panel type A, 19", 1U, black Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 Cable management Additional information Cable management panel 1U type ARAL9004 Height 5 cm Width 6 cm Depth 49 cm Net weight 0.544 kg Colour Black
Features- Extends local PC VGA/keyboard/Mouse to Remote side- Uses Cat 5e cable to connect the local and remote units- Easily add or remove computers connected to the installation- Supports real time DDC communication- Superior video quality – up to 1920 x 1200- Allow access to a computer from the remote console up to 100 m distance- Support manual compensation adjustment for better video quality- No external power supply needed for local unit- Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)- Wall mountablePackage Contents- 1x CE100L Mini USB KVM Extender (Local Unit)- 1x CE100R Mini USB KVM Extender (Remote Unit)- 1x USB/VGA Cable- 1x 0AD6-1705-10EG Power Adapter (for Remote Unit)- 1x Mounting Kit- 1x User InstructionsVGA (D-Sub) portide arv2USB 2.0 portide arv3MikrofonisisendEiMaksimaalne ülekandekaugus100 mToote värvMustKaablid kaasa arvatudUSB,VGAPaigalduskomplektJahKiirstardi juhendJah
Mini DisplayPort adapter (M) -> VGA (F) on the cable- The adapter connects the VGA monitor to the mini DisplayPort port.- Compatible with Apple Thunderbolt (TM).- No additional power supply required.- Interface: DisplayPort v.1.2- Video resolution: up to 1920 x 1200 x 60Hz 1080p- Power consumption: 400 mW in active mode, 15 mW in standby mode
Tootja: Unitek Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1x male USB C-type, 1x male USB A-type kaabli pikkus: 0.1 m kullatud pistikud: Ei kaabli värvus: must Netokaal: 0.033 kg Brutokaal: 0.058 kg Lisaandmed: USB3.0 Type C Male To Type A Male, Jacket värviline Lisainfo: desctiption
Dimensions: 14 x 80 x 130 mm Weight: 85 Accessories included: - IB-273StU3- USB 3.0 cable- Protective case- Screwdriver- User manual Other features: - Height of the hard disk: up to 9.5 mm- HotSwap- Plug & Play- Transmission speed: USB 3.0 to 5 Gbit/s- Power connection: power supply via USB
