Varia lisaseadmed

The iFixit Mandible Wire Strippers are a versatile tool for precise stripping of wires of different gauges. Ideal for customizing fan and power supply cables, installing RGB systems, or modding projects. They remove insulation quickly and cleanly without damaging the wire—perfect for DIY enthusiasts and modding professionals! An integrated return spring ensures that the strippers automatically open after each use. This makes the workflow easier and reduces hand strain during frequent use. With its ergonomically designed handle, the Mandible Wire Strippers offer high comfort even during extended use. The locking mechanism also ensures safe storage when the tool is not in use.

Baseus VA1 2-in-1 wheel pump blackThe Baseus multi-functional inflator supports both wireless and wired modes. With its powerful 19-cylinder pump and precise pressure measurement system, it quickly and accurately refills air in tires, balls or inflatable accessories. A built-in LED flashlight, powerbank function and 5 ready-to-use modes make the device perfect for any conditions - travel, camping and emergencies.Inflation in two modesYou can use the device in two ways - wired (via a 12/24 volt cigarette lighter socket) or wirelessly thanks to the built-in 6000 mAh battery. In wireless mode, the pump works for up to 180 days on standby. The design with three ventilation channels prevents overheating even during prolonged operation.Precise and fastThe pump reaches a speed of 20,000 rpm and a pressure of up to 2.5 bar. This allows just 6 minutes to inflate an empty R175 tire. The large LCD display provides an accurate real-time pressure reading with an accuracy of 0.03 bar.5 operating modes and Auto Stop functionThere are five operating modes to choose from. With just one press of a button, you can start pumping. When the device reaches the set value, it will automatically turn off.Flashlight and powerbank in oneThe device features a detachable LED flashlight with three light modes - Emergency lighting, Flashing and SOS. In addition, the pump acts as a powerbank - the USB-A port allows you to charge your devices, and the USB-C port is used to charge the pump itself.Safety of useThe pump is equipped with up to 12 safety features that protect the battery and motor from damage. Among other things, the device protects against overheating, overcharging, too low or high voltage, reverse polarity, short circuit and overload. This allows you to use it without worry.Included:Wheel pumpDetachable LED flashlightPower cord for cigarette lighter socketCharging cableInflation hose with tire tipTip for inflatable wheels and accessoriesTip for Presta valvesNeedle for balls ManufacturerBaseusManufacturer codeC11169001121-00ColorBlackPower supply from cigarette lighterDC 12V⎓6.5A, 24V⎓3.5A (max).USB-C input9V⎓1.5A, 5V⎓2.4AUSB-A output5V⎓2.4A, 9V⎓2A, 12V⎓1.5ARechargeable battery11.1V 2000mAh (22.2Wh)MaterialAluminum, PC, ABSWeightApproximately 700 g

FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes

FEATURES • USB 3.0 High-Speed Transmission - up to 500MB/s transmission rate, large files transferred in seconds• Support Read for 2TB Hard Drive - 5V power supply easily drives large capacity hard drives• 4-Port Expansion - independent operation for each port, smooth connection to external devices SPECIFICATIONS Material: ABSWeight: ~32gCable Length: 15 cmInput Port: USB-AOutput Port: 4x USB-A 3.0 5GbpsInput: 5V⎓3AOutput: 5V⎓0.9AOperating System: Windows, Apple OS, Linux, Vista

CSV-1009 DisplayPort™ 2-in-1 Bi-directional Switch 8K The Club 3D® CSV-1009 is a versatile DisplayPort™ switch that allows you to switch between two sources on one screen or route one source to either of two screens at 8K resolution. DisplayPort™ 2-in-1 Bi-directional Switch for 8K; it can switch either of two sources to one display or switch one source to either of two displays. Supports the DP1.4 specification. Video resolution up to 7680x4320P at 60Hz. Supports HDR, DSC, and HDCP pass-through. The toggle button lets you quickly switch between 2 video sources or 2 monitors, and the blue LED indicators on both sides show which port is selected for operation. The longer/thinner the cable, the greater the risk of signal instability. To ensure maximum performance, use our Club 3D® cables. Power can be drawn through the DP male port from the connected device. If some devices are not compatible with power supplied via the DP male port, power can instead be supplied to the switch via the Type-C® female port.