Original part number CC-HDMI-DVI-10 Product name Gembird HDMI to DVI male-male cable with gold-plated connectors, 3m, bulk pack Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type Video HDMI plugs 1x male HDMI A-type (19-pin, Single Link) DVI plugs 1x male DVI-D (Single Link) /18+1/ Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
Neid Delocki kaablimärgistuse klambreid saab kasutada erinevate kaablite märgistamiseks ja eristamiseks. Neid saab hõlpsasti kinnitada mis tahes kaablile, mille läbimõõt on kuni 6 mm.SpetsifikatsioonKogus: 260 tükki polü koti kohta10 x 26 kaablimärgistuse klambrit tähtedega A-ZMaterjal: PVCKuni 6 mm läbimõõduga kaablileVärv: kollanePakendi sisu260 x kaablimärgistuse klambrit
BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
240W POWER DELIVERY 3.1: UGREEN USB C cable supports up to 240W of power delivery, suitable for the latest high-power charging needs, such as laptops, capable of charging a MacBook Air M3 13" to 88% in 35 minutes. Backward compatible with 140W/100W/87W/65W/45W/30W/20W USB-C charger UNIVERSAL COMPATIBILITY: The USB C to UBS C charger cable is designed to work with a wide range of USB-C devices, including smartphones such as iPhone 15/15 Pro/15 Plus/15 ProMax, Galaxy S24/S23/S22/z fold 5/A35, Pixel 8/7, Moto G Play; laptops such as MacBook Pro 2023/Air, Dell XPS, Surface Laptop 13.5"; tablets such as iPad Air/Pro, Galaxy Tab S9, Surface Pro 9; and various USB-C devices such as Steam Deck ULTRA-DURABLE DESIGN: Engineered with premium nylon braiding and robust aluminum housing, this 240W type c cable is built to withstand over 30,000 bending cycles. The reinforced structure of this 240W usb-c charge cable resists tangles, frays, and everyday wear, making longevity and reliability SUPERIOR E-MARKER CHIP TECHNOLOGY: Equipped with an advanced E-marker chip, this USB C to USB C cable fast charging provides safe and efficient power transmission. It intelligently negotiates power output to match your device's needs, max up to 240W, enhancing compatibility and safety 480MBPS DATA SYNC: Transfer files, photos, and videos at breakneck speeds of up to 480Mbps. This USB-C to USB-C cable makes smooth data syncing between devices without compromising transfer quality or speed, perfect for daily using. [Note: Video output to monitor is not supported]*Function: Charging & Data Sync *USB 2.0 speed up to 480Mbps *Charging Power: 240W (Max) *Wire core: tin-plated oxygen free copper *Multiple internal shielding *Can not transmit audio and video *Aluminum case with braid
BenQ ScreenBar Pro on nutikas monitorivalgusti, mis pakub optimaalselt reguleeritud valgustust, vähendades silmade väsimust ja parandades tööefektiivsust. Selle kompaktne ja stiilne disain sobib ideaalselt igale töölauale, tagades ühtlase valgustuse ilma ekraani peegeldusteta. • Automaatne heleduse ja värvitemperatuuri reguleerimine • Lihtne paigaldus monitori ülaosale • Vähendab silmade väsimust • Kompaktne ja ruumisäästlik disain • Ei tekita ekraanil peegeldusi
Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
xTool SafetyPro™ AP2 Smoke AbsorberThe xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.Powerful, three-stage filtrationThe xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.Quiet operation for complete focusWith low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.Sealed design and easy operationThe AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.Mobility and compatibilityThe xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.Create in a healthy environmentWith the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.IncludedP5010391 x1Filter set x1Pipe clamp x3Smoke exhaust pipe x1Screw set x1Power cable x1Pipe connector x2Wall connector x1Screwdrivers (Phillips and flathead) x2User manual x1 ManufacturerxToolModelP5010391Adapted machineP2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1Product size290*491*542mmProduct weight20.7 kgControl modeTouch button, four adjustable gearsPre-filtration systemCyclone separationRated power220WFilter layersSuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filterNoise55dB
Original part number PP12-1.5M/R Product name Gembird patchcord RJ45, cat.5e, UTP, 1.5m, red Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 1.5 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Boot non-snag-proof Colour Red
See Delocki korpus on väline lahendus erinevatele 9,5 või 12,7 mm kõrgusega Slot-in Slim SATA-ketastele, nt DVD-ROM, DVD±RW, Blu-ray jne. Seega muudetakse sisseehitatud ketas mobiilseks kettaks. Korpus ühendatakse arvutiga või sülearvutiga USB Type-A pistiku kaudu.Tehnilised üksikasjadÜhendused:välised:1 x USB 3.0 Type-A pesasisemine:1 x Slim SATA 13-poolne pesa: 1 x Slim SATA 13-poolne pesa: 1 x Slim SATA 13-poolne pesaKiibistik: Initio INIC-3639Kuni 12,7 mm kõrguste Slim SATA-ketaste jaoksToetab DVD±RW, DVD-ROM, CD-RW, CD-ROM, Blu-rayHot Swap, Plug & PlayEi vaja välist toiteallikatKorpuse materjal: plastikVärv: mustKaabli pikkus: ca. 28 cmMõõtmed (LxSxK): ca. 143 x 139 x 16 mmSüsteeminõudedLinuxi tuum 2.6.38 või uuem versioonMac OS 10.9.5 või uuemWindows 7/7-64/8.1/8.1-64/10/10-64Arvuti või sülearvuti, millel on vaba USB A-tüüpi portPaketi sisuVäline korpusKasutusjuhend
Schuko võrgupistik Clover Leaf IEC C5 pistikupessa Kaabli materjal: H05 VV-F 3G 1,00 100% elektriline ja mehaaniline kontroll VDE poolt heaks kiidetud Värvus: must Täielikult vormitud 10 aastane garantii LINDY toitekaablid sobivad suurepäraselt kasutamiseks professionaalsetes ruumides (salvestusstuudiod, valgussüsteemid ja ka igasuguste ürituste toimumispaigad jne) – aga võid kasutada ka privaatsetes osades.
The USB-C to 3.5mm audio adapter connects your headphones, speakers, and other audio devices to USB-C smartphones, laptops, tablets, and car audio systems, delivering crystal-clear, rich HiFi sound quality. With its wide compatibility, this adapter is ideal for everyday use, allowing for seamless audio connections with a variety of devices. With a built-in microphone and remote control, you can conveniently take calls and control music. The braided textile cable ensures durability and flexibility, while the 130mm length makes the adapter compactly portable.
Original part number PC-189 Product name Gembird power extension cable 6ft Producer Gembird Class of product Cables - others Wire type Power Cable Plug 1 type IEC320 C13 Plug 2 type IEC320 C14 Colour Black Length 1.8 m
Product kirjeldus: D-Link DUB H7 - hub - 7 ports seadme tüüp: Hub - 7 ports Subtype: USB Ports: 7 x USB 2.0 Compliant Standards: USB 1.1, USB 2.0 mõõtmed (WxDxH): 6.3 cm x 10.4 cm x 2.9 cm System Requirements: Apple MacOS 8.6, Apple MacOS X 10.1, Microsoft Windows 98SE/2000/ME/XP Localisation: Continental Europe Manufacturer Warranty: 2-year garantii
Specification:Processor 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographyextensions, 512KB per-core L2 caches, and a 2MB shared L3 cacheFeatures:• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2• Dual 4Kp60 HDMI® display output with HDR support• 4Kp60 HEVC decoder• 4GB LPDDR4X-4267 SDRAM• Dual-band 802.11ac Wi-Fi®• Bluetooth 5.0 / Bluetooth Low Energy (BLE)• microSD card slot, with support for high-speed SDR104 mode• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation• 2 × USB 2.0 ports• Gigabit Ethernet, with PoE+ support(requires separate PoE+ HAT)• 2 × 4-lane MIPI camera/display transceivers• PCIe 2.0 x1 interface for fast peripherals(requires separate M.2 HAT or other adapter)• 5V/5A DC power via USB-C, with Power Delivery support• Raspberry Pi standard 40-pin header• Real-time clock (RTC), powered from external battery• Power button
The official CORSAIR premium individually sleeved 600 W PCIe 5.0/Gen 5 12VHPWR PSU cable delivers power from your CORSAIR Type-4 PSU to the advanced PCIe 5.0 graphics cards.
USB-C 3.1 ja RJ45 Ethernet kaabelühendab ruuteri, modemi või võrgukommutaatori sülearvuti, tahvelarvuti või nutitelefoni USB-C™ porti.Tehnoloogiauuendus, mis lihtsustab teie elu: uuenduslik adapterkaabel on kompaktne Ethernet-lahendus kõikidele USB-C™-seadmetele, millel puudub oma RJ45-port. USB-pistikusse sisseehitatud nutikas nutikiip asendab varem vajaliku, keerulise RJ45-USB-C™-adapteri. Kaabli abil on Ethernet kohe saadaval ilma täiendavate draiveriteta. Lisaboonus: USB 3.1 kaabel ühildub Apple'i Thunderbolt™ 3 pordiga.LAN-kaabel tagab stabiilse traadiga internetiühenduse USB-C™ seadmetele, millel puudub oma võrguport.USB 3.1 abil saavutab kaabel SuperSpeed andmeedastuskiiruse kuni 5 Gbit/s.CAT 6 kaabel on tänu fooliumvarjestusele (FTP) tõhusalt kaitstud häirete eestUSB-kaabli punutud, vastupidavast tekstiilist ümbris on meeldiva tunnetusega ja säästab tundlikke pinduKvaliteetsed ja vastupidavad metallpistikud koos paindumiskaitsega tagavad eriti pika kasutusaja.USB-C™ pesa ühildub populaarsete kaubamärkide, nagu Lenovo, HP või Dell, sülearvutitega, samuti Windowsi, macOSi ja Androidiga ning enamiku Thunderbolt™ 3 seadmetega, nagu Apple MacBook või iPad.Pange tähele: internetikaabel ei sobi mängukonsoolide jaoks ümberpööratavaks kaabliks
Original part number A-HDMI-VGA-04 Product name Gembird adapter HDMI-A(M) ->VGA (F), on cable, black Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA Female Plug 2 type HDMI male Other information Other information Colour Black Additional information Output: 1 x VGA DB15 female without nuts, VESA up to WUXGA, 1920 x 1080 at 60 HzInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Cable : 15 cmChipset CH7101Dimensions: 45 x 15 mm x 200 mmNet weight: 36 g
The Logitech Tap controller enhances video conferencing room control with its sleek design and features. This 10.1-inch touchscreen device is a comprehensive solution for any meeting room. With a display resolution of 1280 x 800 pixels, it offers vivid clarity, ensuring that managing your video conferencing settings is both easy and efficient.Designed for versatility, the Logitech Tap comes equipped with a range of interfaces, including HDMI input, USB-C 3.1, and USB 3.1, providing seamless connectivity with various devices. Its anti-theft protection and compatibility with Kensington security locks mean that it can be securely installed in any environment, giving you peace of mind.Moreover, the integrated speaker and motion sensor features enhance the functionality of the Logitech Tap, making it a smart addition to any conference room. The speaker ensures that audio is clear and audible, while the motion sensor contributes to energy efficiency by detecting room occupancy.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
