DS70-250BL1 Neomounts desk monitor arm Neomounts DS70-250BL1 full motion monitor arm desk mount for 17-35" screens - Black The Neomounts DS70-250BL1 NEXT Slim is a full motion desk mount designed for screens up to 35", boasting a maximum weight capacity of 9 kg suitable for both flat and curved displays. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
The Savio AK-65 2.5" external HDD/SSD enclosure, is the ideal solution for people who want to store and move their data in a convenient and secure way. Fast data transfer The enclosure is compatible with 2.5" HDD/SSD drives with a height of 7 or 9.5mm, so you can choose a drive with the capacity and specifications to suit your needs. High data transfer speeds ensure fast copying and transferring of files, which is extremely important in today's dynamic digital environment. Data safe in all conditions With a wide storage temperature range of -20C to 50C, the case can be kept safe in a variety of weather conditions. This ensures that your data remains secure. Compact and versatile Its compact dimensions are 120.5 × 75 × 13 mm and its light weight of 45 g make it convenient and easy to carry. Compatibility with Windows XP, Vista, Win7/8/10/11, macOS and Linux operating systems makes the Savio case extremely versatile. Technical specification: Interface: USB 3.0 SuperSpeed (up to 5 Gbps) Drive type: HDD / SSD 2.5 with a height of 7 or 9.5 mm Data transfer rate up to 5 Gbps Input voltage: 5 V Storage temperature: -20C 50C Dimensions: 120.5 × 75 × 13 mm Weight: 45 g Colour: black Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
The Savio AK-67 M.2 SSD NVMe external drive enclosure is a state-of-the-art solution that will allow you to store and transfer data in an extremely fast and secure way. Incredible capacity With a maximum installed capacity of 4TB, you can store large amounts of data and files without having to clear space frequently. High data transfer speeds allow you to transfer large files and information in no time. High compatibility The enclosure supports a variety of M.2 drive types, including M.2 2230, M.2 2242, M.2 2260 and M.2 2280, giving you the flexibility to choose the right media. Compatibility with various operating systems, such as Windows XP/Vista/7/8/10/11, macOS and Linux, makes the chassis user-friendly for all users. Sleek design The case measures 104.5 × 39.5 × 12 mm, making it compact and easy to carry. Its light weight of 44 g makes it the ideal companion for travel or work, providing mobility and convenience. Technical specification: Interface: USB 3.0 Maximum bandwidth: 10 Gbps Maximum capacity of the installed disk: 4 TB Connector: USB 3.1 Gen 2 Dimensions: 104.5 × 39.5 × 12 mm Weight: 44 g Colour: grey Supported drives: M.2 2230, M.2 2242, M.2 2260, M.2 2280 Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
Enhance storage capabilities with the DIGITUS storage enclosure. Built for M.2 NVMe cards, this product supports a data transfer rate of 20 Gbps, ensuring speedy access to your files and applications. The aluminum design provides durability while facilitating heat dissipation, making it suitable for various environments with operating temperatures from 5°C to 50°C. With a compact length of 25 cm, this USB-C to USB-C external cable ensures a tidy and efficient setup without compromising performance.This storage enclosure supports up to 8 TB capacity, allowing ample space for your essential data. The LED indicator offers a clear view of the device's status, providing real-time feedback on its operation. It is user-friendly with its Plug-and-Play capability, seamlessly connecting via USB 3.2 (Gen 2) to your devices. Ideal for those looking to expand storage options without the hassle of complex installations.
The Neomounts DS60-600BL2 NERO monitor arm is the perfect choice for those looking for a sturdy and versatile solution for two monitors up to 32" with a weight capacity of 8 kg per screen. This full motion monitor arm offers maximum flexibility thanks to its versatile tilt (90°), rotate (360°) and swivel (180°) technology, enabling you to always find the optimal viewing angle for an ergonomic working posture. The NERO desk mount features manual height and depth adjustment, allowing you to adjust your workspace completely to your liking. In addition, the clever 180° stop mechanism prevents the mount from making contact with the wall or separation panel when installed near it. The welded base guarantees optimal stability and sturdiness. The practical cable management system ensures neat routing of cables. In addition, the base of the DS60-600BL2 provides a convenient space to place a phone, for a tidy desk. The DS60-600BL2 is suitable for screens that meet pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. For a seamless connection of the screens, the micro-adjustment function can be used. Installation of the NERO is quick and easy. The Easy-release system makes it easy to attach or detach the screen. Additionally, fixing the clamp to the desk only takes a few actions and, in addition to manual installation, can also be installed using an Allen key or drill for even faster installation. The NERO monitor arm's quick-span lever also allows for easy adjustment of the arm's height without additional tools. With sustainability in mind, the packaging of the NERO monitor arms is 100% plastic-free and made entirely of recyclable cardboard and paper.
The Club 3D CAC-2530 USB-C to RJ-45 network adapter provides a reliable solution for seamless wired connectivity. With a compact integrated design and a 12 cm cable length, this adapter is perfect for on-the-go use, ensuring fast and efficient network connections. Supporting a variety of data link protocols including Gigabit and 5 Gigabit Ethernet, this adapter offers data transfer rates of up to 5 Gbps, making it suitable for high-speed networking requirements. This network adapter features essential capabilities such as Wake On LAN (WOL), VLAN support, and Jumbo Frames support, enhancing its functionality for diverse networking scenarios. Built with compliance to FCC, RoHS, and EMI standards, it allows for safe and sustainable use. The Club 3D CAC-2530 is USB-powered for convenience and includes USB Pass-Through functionality, making it a versatile tool for connecting multiple devices. Experience a solid wired connection with this efficient and compact network adapter.
The AXAGON ADR-207 active USB 2.0 extension cable with a length of 7.5 meters is ideal for connecting your computer to USB devices such as a mouse, keyboard, webcam, printer, scanner, plotter, and others. The active USB repeater cable amplifies the transmitted signal and allows you to connect a USB device at a significantly greater distance than a passive cable would allow. The cable's range can be further extended by connecting several cables in sequence. A great advantage of the ADR-207 cable is the integrated connector for additional power supply. In most cases, power via the USB bus is sufficient, but for devices with higher power consumption, USB power may be insufficient over longer distances, and an external power supply from the mains can solve this problem. The exceptionally compact body of the repeater cable allows trouble-free use in electrical installation ducts or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal unwanted interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type A (F) female connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-QC18. When powering the repeater cable with the power adapter, an external 2.5" disk can be connected without the need for own power supply to the disk. For longer USB route with multiple repeater cables connected in a row, the USB bus supply may be inadequate for USB devices with lower power consumption than an external 2.5" drive. Also, in this case it can help to boost the power supply by connecting a power adapter. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB connection. Behind the active USB cable, a common passive USB cable can also be used. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, macOS, Linux, Chrome OS and Android. Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 / 2025 and later (all 32- and 64-bit Windows versions supported). Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > A-F active repeater 7.5 m long, USB-A / 3.5 mm power cable, printed installation manual in CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Maclean MC-967 universal desk mount is a practical solution for people working on two screens simultaneously. It allows you to increase your working space, improve ergonomics and increase productivity. The mount is designed for mounting 2 monitors of different brands with a weight of up to 9 kg and screen diagonal from 13 to 27". We can easily attach screens in VESA standard to the mount: 75x75, 100x100 mm. Compatible with LED, LCD monitors: Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, Iiyama, Acer. The MC-967 allows the user to adjust the tilt angle and height of each monitor, allowing for optimal positioning of the screens in relation to each other and an ergonomic setup for the user. Cable grommets help keep cables neatly organized. This reduces desk clutter, resulting in a neater look and a more organized workspace.
Der 90 Watt Netzadapter DELL-14P3N ist speziell auf die Erfüllung der Stromanforderungen eines Dell Notebook ausgelegt. Über den leistungsstarken 90 Watt Netzadapter kann das System zum Betrieb und zum gleichzeitigen Aufladen des Akkus an die Stromversorgung angeschlossen werden. Im Lieferumfang ist ein 1 Meter langes Netzkabel enthalten. Jetzt muss das Netzteil nicht mehr zwischen Büro und Zuhause hin- und her getragen werden. Mit einem zweiten Netzadapter für das Notebook ausgestattet, hat man einen fürs Büro und einen für Zuhause oder unterwegs. Der 90 Watt Netzadapter DELL-14P3N ist mit einem Gummiriemen zum einfachen Kabelmanagement und einem LED-Leuchtring auf dem Gleichstromanschluss ausgestattet. Originalteile von Dell werden strengen Tests durch qualifizierte Techniker unterzogen, um Kompatibilität und Zuverlässigkeit sicherzustellen.
Fully Mobile Dual Monitor Desk Mount for screens up to 45" and a maximum weight of 2×20kg - suitable for both flat and curved monitors. This robust desk mount is specially designed for large monitors up to 45 inches, supporting up to 20kg per arm, making it ideal for demanding work environments and high-quality setups. Whether for flat or curved screens, the mount provides maximum stability and flexible, space-saving positioning. Its sturdy, durable construction easily supports heavy monitors while allowing precise adjustment in all directions. The integrated spring tension mechanism ensures smooth weight adjustment, so each monitor can be positioned effortlessly without repeated calibration. The VESA quick-release feature allows fast and easy mounting or removal of monitors. An innovative quick connector simplifies joining the two arm segments, significantly reducing assembly effort. With two flexible mounting options - desk clamp or grommet - the mount can attach to almost any workstation. The built-in 180° rotation limiter prevents accidental collisions with walls or neighboring screens, and smart cable management keeps the setup neat and professional. Perfect for users who value ergonomics, stability, and functionality - in the office, studio, or home. Compatible Screens: Supports flat and curved monitors up to 45" Durable Construction: Maximum load capacity of 20kg per arm Space-Saving: Integrated cable management VESA Quick-Release: Fast and easy monitor attachment/detachment Quick Connector: Joins two arm segments for easy installation Two Mounting Options: Desk clamp or grommet mount Integrated Spring Tension Mechanism: Ensures precise weight adjustment 180° Rotation Limiter: Prevents monitor arms from hitting walls or other screens Tested and Certified by IGR (Institute for Health and Ergonomics)
Fully Mobile Monitor Mount for screens up to 57" and a maximum weight of 27kg - suitable for both flat and curved monitors. The integrated gas spring system with adjustable tension allows effortless and precise positioning of the monitor to meet individual preferences. With a wide range of motion, the mount supports tilting, swiveling, and smooth height adjustment, providing ergonomic comfort and optimal viewing experience. The VESA quick-release feature enables fast tool-free mounting or removal of the monitor, while the quick connector allows easy assembly of the arms. The mount is fully desk-mounted and offers two flexible installation options - desk clamp or grommet. Integrated cable management keeps the workstation organized. An additional pole mount provides extended adjustment options, enhancing the functional design. Compatible Screens: Supports flat and curved monitors up to 57" Durable Construction: Maximum load capacity of 27kg Space-Saving: Integrated cable management VESA Quick-Release: Allows fast and easy monitor attachment/detachment Quick Connector: Joins two arms for fast and easy installation Two Mounting Options: Desk clamp or grommet mount Gas Spring with Built-in Tension Adjustment: Ensures precise weight balancing Wide Range of Motion: Supports tilt, swivel, rotation, and height adjustment for optimal viewing Additional Pole Mount: Provides extra adjustment flexibility Ergonomic Certification: Tested and certified by IGR (Institute for Health and Ergonomics)
4-Port SuperSpeed USB 3.0 , 4 downstream USB Type A (female) ports, 1 upstream USB Type Micro-B (female) port, USB specification version 3.0, 2.0, 1.1, 1.0, OHCI, EHCI
Gembird HDMI to Micro-HDMI adapter Features HDMI (A female) to micro-HDMI (D male) adapter; Gold plated contacts. Type HDMI to Micro-HDMI adapter Dimensions 35 x 20 x 11 mm Weight 7 g
Product kirjeldus: D-Link DUB H7 - hub - 7 ports seadme tüüp: Hub - 7 ports Subtype: USB Ports: 7 x USB 2.0 Compliant Standards: USB 1.1, USB 2.0 mõõtmed (WxDxH): 6.3 cm x 10.4 cm x 2.9 cm System Requirements: Apple MacOS 8.6, Apple MacOS X 10.1, Microsoft Windows 98SE/2000/ME/XP Localisation: Continental Europe Manufacturer Warranty: 2-year garantii
Featuress- Support the RS232 Serial interface.- Full compliance with the USB Specification.- Up to 230Kbps Maximum Data Transfer Rate.- Works with cellular phones, PDAs, digital cameras, modems or ISDN terminal adapter.- OS Compatibility: WIN98, WIN ME, WIN 2K, WIN 2003, WIN XP, Windows Vista, 7 LINUX and Mac OS 8.6/9/10Package Contents- 1x USB-to-Serial Converter- 1x Driver Disk- 1x User InstructionsPurpose for die Nutzung von deviceen with 9-Pin seriellem connection an einem Rechner with USB 2.0 connection.Portfrom 9-Pin-Seriell-plugto USB-A-plugLength 0.4 m
Neomounts by Newstar CPU-D200. Tüüp: Lauale paigaldatav protsessori alus, Maksimaalne kaal (mahutavus): 30 kg, Toote värv: Must. Laius: 230 mm, Laiuse reguleerimise ulatus: 130 - 230 mm, Kõrgus: 540 mm. Kartongist põhipakendi ...
This NewStar CPU mount, model CPU-D200SILVER, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn’t use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor. This NewStar CPU mount allows vertical installation of computers. Hide your cables and keep the workplace nice and tidy. Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount. All installation material is included with the product. Max. weight: 30 kg Width: 13-23 cm Height: 39-54 cm Silver
Product kirjeldus: RaidSonic ICY BOX IB-HUB1703-QC3 - hub - 7 ports seadme tüüp: Hub - 7 ports Subtype: USB Ports: 7 x SuperSpeed USB 3.0 Features: sisseehitatud 2-port USB laadija, sisseehitatud 1-port QC 3.0 USB laadija Compliant Standards: USB 3.0 Power: AC 120/230 V mõõtmed (WxDxH): 18.5 cm x 6.4 cm x 3 cm kaal: 235 g värv: must System Requirements: Apple MacOS, Microsoft Windows
Tootja: Lanberg Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1x male USB 2.0 Type-B, 1x male USB 2.0 Type-A kaabli pikkus: 1.8 m kullatud pistikud: Ei kaabli värvus: must
Functions: HDD capacity unlimited Plug & Play and HotSwap Dimensions: 203 x 30 x 115 mm Weight: 0.27 Accessories included: IB-377-C31 Power adapter Type-C to Type-C cable Manual Stand Other features: Interface to PC: USB 3.1 Type-C, UASP, up to 10 Gbit/s
