Slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. USB Outputs: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
SAVIO Adapter HDMI (M) VGA 15 pin (F) with sound (jack 3.5mm) CL-23/B Resolution up to 1080p It does not require additional power supply Has an audio output Plug & Play Audio cable jack 3,5 mm Activity range: audio video transfer HDMI direction -> VGA
Displayport (M) V1.1 -> HDMI (M) cable 5M black The Displayport to HDMI cable is the perfect way to connect Displayport-equipped devices to HDMI-equipped displays. With this, Displayport to HDMI adapters will no longer be needed. The cable allows you to support Full HD resolution, which will be perfect for office solutions. ATTENTION Due to its construction, the Displayport to HDMI cable only transmits the signal in one direction DP >> HDMI.
SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
CloneStation & DockingStation for M.2 NVME & SATA 2.5/3.5 SSD/HDD IB-2915MSCL-C31 MOUNTING MADE EASY: Experience a new mode in hard drive installation with our tool-free design, allowing for quick and easy installation of 2.5", 3.5" HDD, or M.2 SSD drives. Just plug your drive into the assigned slot and enjoy the smooth copying process. CLONING WITHOUT SOFTWARE: Backing up data has never been easier: With our software-free cloning technology, the process of creating a secure copy of your data has been simplified and streamlined. Offering a more efficient solution. CONNECTION WITH TOP SPEED: With the power of USB 3.2 Gen 2 and the inclusive USB Type-C and Type-A cable, experience data transfer that's not just swift, but impressively efficient, boasting speeds up to 10 Gbit/s. PRECISE CLONING: Benefit from precise duplication. Each bit is replicated from the source drive to the destination as a flawless copy of all data and configurations of the original drive. The process of duplicating data from a durable HDD to a fast SSD, or vice versa, couldn't be more comfortable. BIDIRECTIONAL CLONING: Clone from 2.5"/3.5" SATA HDD/SSD to M.2 PCIe NVMe SSD or do the reverse, all at the push of a button. Allowing for a straightforward data backup or system acceleration process, catering to your specific needs.
SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Desk mounted adjustable mounting arm for 3 monitors (full-motion) Position your screen perfectly Lightweight and tilting design Adjustable monitor desk mount for 3 monitors Two arms rotate, extend and retract, tilt to change reading angles, and allow to rotate displays from landscape-to-portrait mode, etc Central mount allows height adjustment, swivel, tilt and rotation Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27" ) Durable adjustable gas-springs suitable for monitors of 1 - 7 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The wall mount allows you to individually position 1732" monitors. In addition, the Quick-Release function makes it easy to mount the monitor. The VESA mount is very easy to slide into the appropriate mount and fasten with a screw. Without much effort, you can adjust the monitor according to your needs with the possibility of tilting, tilting or vertical format monitors The use of an integrated gas spring makes it easy to adjust the height of the monitor Do something good for your health by optimally adjusting the monitor to your height and sitting position In addition, monitor cables can be neatly installed in the supplied cable guides Perfect in terms of ergonomics, adjusting the position of the monitor to the height of the user Integrated gas spring for easy height adjustment Monitors can be tilted, tilted, swiveled and height-adjustable VESA mount tilt: 180° (two hinges, each rotated 180°) VESA mount tilt: 70° VESA mount rotation: 360° Maximum height adjustment: 28 cm With Quick-Release function for easy and quick installation For flat and curved displays Integrated cable management system
2-Bays 2.5"/3.5" SSD/HDD Clone Station with card reader and USB-ACompatible with both 2.5"/3.5" HDDs and SSDs Supports standalone cloning without a computer Integrated card reader for CF and SD memory cards High-speed data transfer via USB connection Includes a power adapter for reliable operation.
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A
Travel USB-A 5Gbps hub AXAGON HUE-C1A fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-A cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply you can connect even more external drives to your computer or increase the number of charged mobile phones. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type A male connector on a fixed 19 cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-A hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The DIGITUS USB-A to USB-C power cable delivers performance with a length of 95 cm, ensuring a flexible connection for various devices. Designed for reliability, this cable operates effectively across a range of temperatures from 0°C to 70°C, making it suitable for diverse environments. This kit includes both a transmitter and receiver, providing convenience for seamless data transfer and connectivity. Engineered to support high-definition video and audio, this product offers features like 4K UHD video streaming, 36-bit Deep Color support, and HDR support. With support for HDMI and USB-C data link protocols and compliance with standards like CAT 6 and HDCP 2.3, this product ensures quality and robust performance for all multimedia needs.
The DIGITUS USB extension cable DA-73113 is designed to enhance your connectivity experience. This reliable cable boasts USB 3.2 compliance, ensuring high-speed data transfer. With its double shielded technology, you can expect reduced interference for better performance. Featuring a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable allows for seamless connections between devices, making it ideal for various setups, whether at home or in the office.
The Neomounts FL40-450BL12 is a full-motion pole mount for flat screens up to 42" with a maximum weight capacity of 25kg. The versatile tilt (25°) and swivel (180°) technology allows you to create the optimum viewing angle. The mount can be leveled for the perfect installation. The FL40-450BL12 has a depth of 7.6-32.2cm and is suitable for screens that meet VESA hole pattern 75x75 to 200x200mm. The mount is equipped with a cable management system to secure and route any loose cables.
The DST-Mini Duo is a high performance and versatile solution for connecting laptops, tablets or smartphones to a range of interfaces including 2 HDMI displays. Featuring all critical interfaces required for a modern workstation, this mini docking station uses a single USB 3.2 Type C cable to connect up to two 4K displays simultaneously, while improving connectivity to other devices through Gigabit Ethernet and USB 3.2 / 3.1 SuperSpeed 10Gbps and 5Gbps ports.This laptop docking station enables the connection of an HDMI display to a laptop at resolutions of 8K 7680x4320 30Hz using DisplayPort alternate mode through the USB Type C port. It also supports video resolutions of 4K 120Hz, making it the ideal tool for high resolution video editing or game streaming.
Der 90 Watt Netzadapter DELL-14P3N ist speziell auf die Erfüllung der Stromanforderungen eines Dell Notebook ausgelegt. Über den leistungsstarken 90 Watt Netzadapter kann das System zum Betrieb und zum gleichzeitigen Aufladen des Akkus an die Stromversorgung angeschlossen werden. Im Lieferumfang ist ein 1 Meter langes Netzkabel enthalten. Jetzt muss das Netzteil nicht mehr zwischen Büro und Zuhause hin- und her getragen werden. Mit einem zweiten Netzadapter für das Notebook ausgestattet, hat man einen fürs Büro und einen für Zuhause oder unterwegs. Der 90 Watt Netzadapter DELL-14P3N ist mit einem Gummiriemen zum einfachen Kabelmanagement und einem LED-Leuchtring auf dem Gleichstromanschluss ausgestattet. Originalteile von Dell werden strengen Tests durch qualifizierte Techniker unterzogen, um Kompatibilität und Zuverlässigkeit sicherzustellen.
Neomounts CL35-340BL22. Ekraani minimaalne suurus: 58,4 cm (23"), Ekraani maksimaalne suurus: 106,7 cm (42"), Paigaldussüsteemi ühilduvus (min): 100 x 100 mm, Paigaldussüsteemi ühilduvus (max): 200 x 200 mm. Kõrguse ...
The Gembird Cablexpert power connector adapter is a must-have tool for ensuring your devices maintain power connectivity in various environments. Designed to offer a seamless transition between power 3-pole (UK) and power CEE 7/4 connections, this adapter is the perfect solution for travelers, businesses, and home use. It adheres to stringent safety and environmental standards, including EMC 2014/30/EU, RoHS 2011/65/EU, and several EN compliance marks, ensuring its reliability and safety in any setup. With the capability to handle a rated current of 13 A, it's built to last and provide a dependable connection. Whether you're adapting to different power systems or ensuring your devices are safely powered, the Cablexpert power connector adapter is your go-to choice for power connectivity.
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.
Gembird HDMI to Micro-HDMI adapter Features HDMI (A female) to micro-HDMI (D male) adapter; Gold plated contacts. Type HDMI to Micro-HDMI adapter Dimensions 35 x 20 x 11 mm Weight 7 g
Premium quality ImageLast laminating pouches for superior laminating results every time, Unique arrow directional quality mark disappears when laminated, Ideal for notices, photos, instructions and frequently handled documents, ...
Original part number CCP-MUSB2-AMBM-10 Gembird micro USB cable 2.0 AM-MBM5P black 3m Class of product Cables - USB plugs 1x male USB A-type1x male micro-USB Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
3M PF23.0W9 Black Privacy Filter for desktops with 58.4 cm (23") display sizeThe Privacy Filters PF23.0W9 are designed to fit 16:9 aspect ratio widescreen desktop monitors with a viewable screen size of 23.0". Using 3M microlouver technology the filter gives full 60° privacy protection on either side, protecting sensitive information from unauthorised viewing. With a simple attachment system the filter can be easily removed for screen sharing.3M microlouver privacy technology provides privacy screen protection for sensitive data.Reversible glossy or matte screen finish. Matte screen finish reduces discomfort from screen glare.Two easy on, easy off attachment systems. Filter stays in place when notebook is closed.Suggested applications:Desktop monitor user working in sensitive areas. Open plan offices, open reception areasProtecting confidential/sensitive information - customer, commercial, medical, government, e-examination Type Privacy Filter Compatible with Universal Screen Diagonal (cm) 58,4 Screen Diagonal (inch) 23 Aspect Ratio 16:9 Quantity 1 Colour Black
Original part number CS692-AT Product name ATEN CS692 2-Port USB HDMI KVM Switch, Audio 2.1, Remote port selector (1.8m) Producer Aten Class of product KVM switches Number of PC ports 2 Supported keyboard/mouse/display ports USB, USB, HDMI Local console's ports 1 x (USB, USB, HDMI) Number of remote users (IP) 0 Type of computer case compact size Maximal resolution 1920 x 1200 pixels Possibility of joining into cascade No Switching audio signal (microphone/speakers) Yes
Original part number CC-PSU-6 Product name Gembird Internal power adapter cable for PCI express Producer Gembird Class of product Cables - others Wire type Adaptor Plug 1 type 2 x Molex 4-pin (male) Plug 2 type PCI-E 6-pin (male) Length 15 cm
The USB 3.0 Adapter from LogiLink to connect USB devices. Transfer your data with a max. data transfer rate up to 1000 Mbit/s. Support Jumbo packet up to 9 KB/s.ÜhenduvustehnoloogiaJuhtmega ühendatudSisemineEiHostiliidesUSBLiidesEthernetEthernet LAN (RJ-45) pordid1Andmeedastuskiirus (maksimaalne)1000 Mbit/sTäisdupleksJahVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3uKiibikomplektRealtek RTL8153Ethernet LANJahKaabeldustehnoloogia10/100/1000BaseT(X)Ethernet LAN-i andmeedastuskiirused10,100,1000 Mbit/sEthernet-liidese tüüpGigabit EthernetHiigelkaadrite tugiJahToote värvMustAuto MDIX IEEEJahToetatud Windowsi operatsioonisüsteemidWindows 10 Education,Windows 10 Education x64,Windows 10 Enterprise,Windows 10 Enterprise x64,Windows 10 Home,Windows 10 Home x64,Windows 10 Pro,Windows 10 Pro x64,Windows 2000,Windows 2000 Professional,Windows 7 Enterprise,Windows 7 Enterprise x64,Windows 7 Home Basic,Windows 7 Home Basic x64,Windows 7 Home Premium,Windows 7 Home Premium x64,Windows 7 Professional,Windows 7 Professional x64,Windows 7 Starter,Windows 7 Starter x64,Windows 7 Ultimate,Windows 7 Ultimate x64,Windows 8,Windows 8.1,Windows ME,Windows Vista Business,Windows Vista Business x64,Windows Vista Enterprise,Windows Vista Enterprise x64,Windows Vista Home Basic,Windows Vista Home Basic x64,Windows Vista Home Premium,Windows Vista Home Premium x64,Windows Vista Ultimate,Windows Vista Ultimate x64,Windows XP Home,Windows XP Home x64,Windows XP Professional,Windows XP Professional x64Toetatud Maci operatsioonisüsteemidJahKaasnevate toodete arv1 tkJuhendJah
