Varia lisaseadmed

The DIGITUS cable management channel is a practical solution designed to enhance your workspace by neatly organizing and concealing cables under the desk. Its under-desk mountable design not only helps in maintaining a tidy area but also contributes to a safer working environment by reducing the chances of tripping over loose cables. Made from steel and finished with a powder coat, this cable management tray is durable and resistant to wear, making it a suitable investment for both home and office settings. Embrace a clutter-free desk with DIGITUS's efficient cable management solution.

Ugreen, XLR,3m

FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes

Argo laminaator Wallner DWL-4CF

StarTech DISPLPORT6L

RJ45 moodulühendus, CAT 6A, 2x RJ45 emane (8P8C) kahe võrgukaabli ühendamiseks ehtsast metallist korpus / kate (metalliseeritud plasti asemel) metallist korpus, kesta ümbris PCB plaadiga 1:1 sobib PoE + jaoks vastavalt standardile IEEE 802.3at

Inter-Tech Einbaurahmen 3.5" auf 2x2.5"

Expand the capabilities of your laptop or PCAre you looking for a solution to extend the possibilities of your laptop or computer? The RJ45/USB-C adapter from Qoltec is dedicated to anyone who appreciates practical solutions and is looking for a stable and fast internet connection. This compact adapter allows an Ethernet cable to be connected via an RJ45 connector to a USB-C port, eliminating the need for a built-in Ethernet port on the device. With this adapter, users can use wired internet on devices with a USB-C port, achieving high data transfer speeds and a stable connection.Fast and stable internet connectionDevices connected to the adapter can transfer data at speeds of up to 1000 Mb/s, ensuring fast file copying, smooth data transfer between devices and efficient use of external drives, which is particularly important when transferring large files, streaming high-definition video or playing online games.Robust and lightweight housingThe device's compact size makes it extremely practical and convenient, and its light weight will allow you to take it literally anywhere you need it, to work, the office or anywhere else on a business trip and beyond. It will easily fit into a pocket or backpack. The casing of the device is made of high-quality, durable aluminium, which further helps to dissipate heat and provides effective protection against crushing and protects against any damage.Forget drivers, enjoy full plug & play compatibilityIt's thanks to the plug-and-play function that, once connected to your laptop, our device is ready to use without the need to install any additional drivers, just plug in the USB-C cable and you're good to go. The USB-C connector allows you to connect to any computer, laptop, tablet or smartphone equipped with a USB-C port.