Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 type C (naissoost) 2-ühenduse tüüp: Lightning värv: must Lisaandmed: USB type-C (naissoost) to 8-pin (male) adapter plug, Enables connecting any USB-C peripherals to a 8-pin Apple device , mõõtmed
NewStar flat screen desk mount NewStar NM-D775BLACKPLUS Full Motion Desk Mount (clamp & grommet) for 10-49" Monitor Screens, Height Adjustable (gas spring) - Black The NewStar NM-D775BLACKPLUS is a tilt-, swivel and rotatable desk mount for flat screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars' unique tilt (90°), rotate (180°) and swivel (180°/360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 59 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775BLACKPLUS has three pivot points and is suitable for screens up to 49" (124 cm). The weight capacity of this product is 1 to 18 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
10 Port USB 3.0 Hub with On/Off Switches Connect up to 10 USB devices - with On/Off switches for each port Allows up to 10 USB 3.0 devices to be connected to a single port On/Off switch on each port allows users to manage power consumption of the connected devices SuperSpeed transfer rates up to 5Gbps, backwards compatible with USB 2.0 / 1.1 36W of power available for devices with large power requirements Product Type USB Hub Dimensions 169.6 x 46.2 x 25mm, Weight 0.042 kg
The DIGITUS video/audio extender kit offers a comprehensive solution for extending your HDMI and USB-C connections wirelessly over distances up to 30 m. Designed to support 4K video resolution at a 30 Hz V-Sync rate, it ensures high-quality visuals for presentations, movies, and more. The inclusion of HDMI and USB-C ports on both the transmitter and receiver makes it compatible with a wide range of devices, providing flexibility for various setups. Security is paramount, with 128-bit AES, WPA2-Enterprise, and WPA2-PSK encryption algorithms safeguarding your transmissions. Additionally, the device's durable ABS housing and compliance with key standards like DisplayPort 1.2 and HDCP 2.2 ensure reliability and longevity. Whether for professional presentations or enhancing your home entertainment system, this extender kit delivers both performance and peace of mind.
The DIGITUS video/audio extender kit is designed to meet the needs of users requiring high-quality, secure, and flexible wireless video and audio transmission. This kit supports 4K resolution and a 30 Hz V-Sync rate, ensuring that your visuals are not only clear but also smooth. With the inclusion of IEEE 802.11ac technology, it offers reliable wireless connectivity up to 30 m, making it ideal for presentations, streaming, and more in large rooms or across different spaces.Security is paramount, and this device delivers by incorporating 128-bit AES, WPA2-Enterprise, and WPA2-PSK encryption algorithms, protecting your data from unauthorized access. The kit comes with a variety of cables and connectors, including USB-A to USB-C, HDMI, and USB-C extension cables, providing you with the flexibility to connect different devices easily. Additionally, its Plug-and-Play functionality, complemented by a LED status indicator, ensures a hassle-free setup, allowing you to get started quickly without the need for complex configuration.
DS70-250BL1 Neomounts desk monitor arm Neomounts DS70-250BL1 full motion monitor arm desk mount for 17-35" screens - Black The Neomounts DS70-250BL1 NEXT Slim is a full motion desk mount designed for screens up to 35", boasting a maximum weight capacity of 9 kg suitable for both flat and curved displays. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
ROG Aura Monitor Light Bar ALB01 pakub ekraani kohal paigaldatavat valgustuslahendust, mis vähendab silmade koormust ja tagab ergonoomilise töö keskkonna. Selle kohandatav valgus võimaldab reguleerida heleduse ja värvitemperatuuri taset, et sobituda erinevate keskkondade ja tegevustega. Monitori valgusriba kinnitub magnetiliselt monitori ülaosale ja pakub ASUS Aura Sync RGB valgustust, mis täiendab mänguriruumi stiili. • Kohandatav heledus ja värvitemperatuur • Magnetiline kinnitus monitori ülaosale • ASUS Aura Sync RGB valgustus • Silmade koormust vähendav valgustus
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
The AXAGON RSS-CD09 internal frame is designed to be mounted instead of the existing 9.5 mm CD/DVD drive. It is designed for 2.5" SSD/HDD SATA drives. You can easily replace the optical drive in your laptop with a hard drive. The SATA 6G interface allows you to enjoy the speed of modern SSD disks up to 6 Gb/s. Thanks to the absence of complex electronics, it does not slow down the data transfer speed and supports all modern functions such as TRIM. This reduction ensures wide compatibility with various notebook brands. The ODD frame can be set via double switch so it will work with most notebook brands like LENOVO, HP, DELL, ASUS, ACER, SONY, TOSHIBA and others. It is possible to use standard 2.5 SSD disks with a height of 7 mm as well as hard disks with a height of 9.5 mm. The ODD caddy with mounted disk behaves like a standard hard disk in the operating system and in the BIOS (UEFI). By inserting a disk into the adapter, you can easily add an internal 2.5" disk, which can be used to supplement an existing notebook disk.Booting support can significantly speed up older notebooks by adding a 2.5" SSD disk. The unique screwless disk mounting system is secured with a rubber spacer or rubber thread plugs. Rubber insert plugs also help minimize hard drive vibration. Metal springs help fix the adapter in the optical drive bay. The metal frame body is made of aluminum and ensures perfect mechanical protection of the inserted disk. The built-in HQ capacitor helps stabilize the SSD/HDD power supply. Elegant built-in LED indicates disk insertion and data transfer. The package also includes a plastic faceplate (front panel) imitating the front of the optical CD/DVD drive. There are several mounting holes on the back of the reducer to fix in the notebook body. Input: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), 13 pin (7+6) SLIM SATA data and power male connector for notebook connection. Output: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), supports 2.5" SSD/HDD, maximum disk capacity all without limitation, maximum disk height - 9.5 mm, standard 22 pin (7+15) SATA data and power female connector for 2.5" disks. Other features: Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The overall speed depends of inserted disk type and the SATA interface version of the notebook optical drive. It is a pure hardware reduction - for all operating systems, no drivers are installed. Disk boot support in external adapter. Full Plug and Play support. The adapter is powered by a 6-pin Slim SATA power connector. Built-in HQ capacitor for stabilized SSD/HDD power supply. The dimensions of the frame correspond to the slim 5.25" position in the laptop. Aluminum body for disk protection and disk cooling. Other features: Adapter dimensions 128 x 127 x 9.5 mm. Adapter weight 66 g (without faceplate). Notice:The height of the original optical drive must be determined before replacement. RSS-CD09 is designed for a 9.5 mm height. Package contains: ODD adapter for 2.5 SSD/HDD, 4 rubber plugs, plastic pry bar, screwdriver, front panel (faceplate), printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
B-1232CL-U3 ICY BOX Dual HDD / Hard Drive USB 3.0 docking station for SATA 2.5 inch and 3.5 inch hard disk cloning station and reader, adapter, external Manufacturer information: HUGE CAPACITY: Expand your capacity with a dual docking and cloning station for 2.5" and 3.5" SATA drives. With SINGLE mode, both hard drives are recognized as separate drives SYSTEM REQUIREMENTS: A free USB 3.0 Type-A port on the host computer is enough to freely expand the storage capacity. The dock supports Windows and macOS VERY FAST: The USB 3.0 host connection supports UASP and guarantees data transfer speeds of up to 5 Gbit/s. You can also transfer large amounts of data without long waiting times HARD DRIVE CLONING: You can clone bootable hard drives at the touch of a button, even without a computer. The docking station draws power from the included power adapter. Data backup can be that simple ALWAYS INFORMED: Hot-swappable hard drives are easy to replace and boot. A total of four LEDs inform you of the cloning status and progress
The Savio AK-67 M.2 SSD NVMe external drive enclosure is a state-of-the-art solution that will allow you to store and transfer data in an extremely fast and secure way. Incredible capacity With a maximum installed capacity of 4TB, you can store large amounts of data and files without having to clear space frequently. High data transfer speeds allow you to transfer large files and information in no time. High compatibility The enclosure supports a variety of M.2 drive types, including M.2 2230, M.2 2242, M.2 2260 and M.2 2280, giving you the flexibility to choose the right media. Compatibility with various operating systems, such as Windows XP/Vista/7/8/10/11, macOS and Linux, makes the chassis user-friendly for all users. Sleek design The case measures 104.5 × 39.5 × 12 mm, making it compact and easy to carry. Its light weight of 44 g makes it the ideal companion for travel or work, providing mobility and convenience. Technical specification: Interface: USB 3.0 Maximum bandwidth: 10 Gbps Maximum capacity of the installed disk: 4 TB Connector: USB 3.1 Gen 2 Dimensions: 104.5 × 39.5 × 12 mm Weight: 44 g Colour: grey Supported drives: M.2 2230, M.2 2242, M.2 2260, M.2 2280 Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
Travel USB-A 5Gbps hub AXAGON HUE-C1A fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-A cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply you can connect even more external drives to your computer or increase the number of charged mobile phones. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type A male connector on a fixed 19 cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-A hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
X1-3D Desk Mount Gas Spring Monitor Arm Full Motion for More Comfort Thanks to the approved gas lift technology, the monitor can be moved completely freely in all directions, even after installation. This makes it child's play to pull the monitor up, move it away or completely realign the height, depth, and tilt. Ergonomic Screen Adjustment The X1-3D turns the simplest screens into ergonomic wonders, and those who spend a lot of time in front of a screen will quickly appreciate this advantage: The optimal adjustment of your screens automatically promotes an ergonomic sitting posture. It doesn't matter whether you work sitting or standing, the monitor arm allows you to optimally adjust it to your environment. Enlarged Working Area Whether you use your desk as a workstation, battle station or a mix of both. By keeping your 'neutral reach zone' free, the X1-3D provides more space around the monitors and allows you new ways to set up and optimise your workspace. Less Visible Cables With the X1-3D, tangled cables around monitors are a thing of the past. The cables can simply be carried and fixed inside the arm. They thus disappear from the visible area and support a tidy overall appearance. Simple and Quick Assembly Thanks to the table clamp, the monitor arm can be placed freely and easily on the edge of the table. The arm is completely pre-assembled and is simply placed on the rod. Assembly or later repositioning is therefore child's play and can be done quickly. Universally Compatible The monitor arm supports ultrawide monitors with a screen diagonal of ≤ 43", as well as 16:9 monitors with a diagonal of ≤ 40". The monitor must have a VESA 75 or VESA 100 mount and must not exceed a total weight of 10 kg. Quality You Can Rely On To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the X1-3D.
Der 90 Watt Netzadapter DELL-14P3N ist speziell auf die Erfüllung der Stromanforderungen eines Dell Notebook ausgelegt. Über den leistungsstarken 90 Watt Netzadapter kann das System zum Betrieb und zum gleichzeitigen Aufladen des Akkus an die Stromversorgung angeschlossen werden. Im Lieferumfang ist ein 1 Meter langes Netzkabel enthalten. Jetzt muss das Netzteil nicht mehr zwischen Büro und Zuhause hin- und her getragen werden. Mit einem zweiten Netzadapter für das Notebook ausgestattet, hat man einen fürs Büro und einen für Zuhause oder unterwegs. Der 90 Watt Netzadapter DELL-14P3N ist mit einem Gummiriemen zum einfachen Kabelmanagement und einem LED-Leuchtring auf dem Gleichstromanschluss ausgestattet. Originalteile von Dell werden strengen Tests durch qualifizierte Techniker unterzogen, um Kompatibilität und Zuverlässigkeit sicherzustellen.
Pixel A4 Laminator Stylish laminator for a variety of laminating applications in the home or small office Fast heat-up time. Ready to go in 3-minutes 80 & 125 micron laminating capability for added versatility Release trigger for retrieving and re-aligning misfed documents Auto-shut off after 30 minutes inactivity Includes a starter kit for 10 documents
HDMI to DVI female-male adapter with gold-plated connectors, bulk packageHigh-Definition Multimedia Interface (HDMI) is the first industry-supported digital audio/video interface.HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.Digital Video Interface (DVI) is a high-quality digital video standard and a part of HDMI interface.
