Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The HDMI extender kit extends the range of Full HD audio/video signals to a distance of up to 70 m, and the range of 4K / 30 Hz signals can be extended to a distance of up to 40 m with a CAT6 (or higher specification) network cable. The transmitter module is equipped with an HDMI output for connecting a local monitor. Thanks to PoC (Power over Cable) technology, only the transmitter needs to be connected to the power supply. Infrared (IR) signal transmission allows you to conveniently control the signal source using the remote control from the receiver (on the output screen). The scope of functionality also includes the function of copying the EDID of the output screen in the receiver or on HDMI-Loop Out, which can be selected using a switch. Extends the range of the HDMI audio-video signal to a distance of up to 70 m Supports resolutions up to 4K/30Hz, 4:4:4 HDMI 1.4, HDCP 1.4, DVI 1.0 Support for CAT 5e, CAT 6, CAT 6A, CAT 7, CAT 8 network cables Audio support: Up to 7.1ch HD audio PoC (Power over Cable) - only the transmitter requires an external power supply Loop-Out/HDMI output - connect a local monitor to the source device EDID copy function of the output screen in the receiver or on HDMI-Loop Out Infrared signal transmission (two-way) An infrared (IR) signal interface allows remote control of the input source via the output screen Suitable for wall mounting Metal housing
DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
A professional in every way The Unitek S1225A aluminium enclosure with USB 3.2 Gen2 interface allows the installation of any M.2 type PCIe (NVMe) or SATA (AHCI) memory. It is perfectly compatible with drives with heatsinks up to 12.5 mm in height. The slot fits M key and M+B key drives with different lengths: 42 mm, 60 mm or 80 mm. At lightning speed The enclosure provides data transfer speeds of up to 10Gbps. It works with UASP (USB Attached SCSI Protocol) technology and the TRIM (ATA Data Set Management Command) instruction. With UASP, the USB device can establish a command sequence and execute several commands simultaneously. This increases read transfers as well as write transfers by approximately 30 per cent compared to traditional USB devices. TRIM tells the SSD which data blocks are unused and allows them to be refilled with data. This improves performance and extends the life of the drive. Robust armour The case will not only protect the drive from external damage, but also conducts heat brilliantly due to the high quality of the material, the included thermal pads as well as the clever design with aluminium fins. Its compact size means that it can even be stored in a small ladies' handbag. An Autosleep mode is also included to conserve battery power, and starts after 30 minutes of inactivity. The drive slot is ejectable and includes a safety catch to prevent accidental ejection. The included flat cable is robust and will last for years. Quality guaranteed All Unitek products in Poland are covered by a three-year distributor warranty. To activate it, register your purchase via the Unitek Search app (available on iOS and Android). Key features: USB 3.2 Gen2 10Gbps standard with backward compatibility Compatible with PCIe (NVMe) or SATA (AHCI) drives UASP and TRIM Autosleep mode Heat dissipation design
Compact AXAGON ADM2-CM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-C cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-C to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 19 g. USB-C male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
The wall mount allows you to individually position 1732" monitors. In addition, the Quick-Release function makes it easy to mount the monitor. The VESA mount is very easy to slide into the appropriate mount and fasten with a screw. Without much effort, you can adjust the monitor according to your needs with the possibility of tilting, tilting or vertical format monitors The use of an integrated gas spring makes it easy to adjust the height of the monitor Do something good for your health by optimally adjusting the monitor to your height and sitting position In addition, monitor cables can be neatly installed in the supplied cable guides Perfect in terms of ergonomics, adjusting the position of the monitor to the height of the user Integrated gas spring for easy height adjustment Monitors can be tilted, tilted, swiveled and height-adjustable VESA mount tilt: 180° (two hinges, each rotated 180°) VESA mount tilt: 70° VESA mount rotation: 360° Maximum height adjustment: 28 cm With Quick-Release function for easy and quick installation For flat and curved displays Integrated cable management system
The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.
HDMI 2.1 active optical cable HDMI optical cables allow for lossless transmission of audio/video signals over vast distances. Thanks to the use of optical fibres as conductors, they are extremely thin, which facilitates cable routing and additionally provides resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows the transmission of 8K quality video at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, the resolution can be increased up to a maximum of 10K!
Chatting with your besties, streaming in the evening, sitcoms, and chill... You set the action plan and the ENDORFY Atlas Single keeps the screen. And it handles it pretty well - with a load capacity of 8 kg, it's not afraid of even larger, 27-inch screens. The ENDORFY Atlas Single is compatible with 75 × 75 mm and 100 × 100 mm VESA standards. You can also easily adjust the height of the screen, rotate it left or right (from -90° to +90°), and tilt it up or down (from -35° to +35°). Mounting the whole thing takes just a few seconds - just screw the clamp onto the desk and you're done. Your ENDORFY Atlas Single is ready for action.
Connect workstations for more devices Display videos at up to 4K resolution on up to three monitors with our Universal Docking Station with three USB-C displays. Its DisplayLink technology easily connects your monitors to any computer, including MacBook, Chromebook and Windows laptops. Our docking station is equipped with multiple video ports 2x DisplayPort and 3x HDMI for convenient and flexible video connections. Get access to all the peripherals you need with 5 USB-A and USB-C ports, as well as Gigabit Ethernet, 35mm audio input/output and up to 85W of USB-C PD power. Compatible with MacBook, Chromebook and Windows DisplayLink technology makes it easy to connect any display to any computer, including MacBook, Chromebook, Windows and more. Triple 4K display Connect to one, two or three extended displays simultaneously at up to 4K resolution with flexible video ports, 3x HDMI and 2x DisplayPort. Delivering up to 85 watts of power Our docking station supports up to 85 W of USB-C power to all connected devices via a single cable. DisplayLink technology DisplayLink graphics technology works across a variety of computer platforms and connector types, making almost any monitor and system work together. Simply connect a MacBook, PC or Chromebook and everyone can use the same large display, keyboard and mouse. Whether you're working, streaming or gaming, you'll enjoy simple connections, robust connectivity and ultra-low latency.
The Neomounts DS60-600BL3 NERO monitor arm is the perfect choice for those looking for a sturdy and versatile solution for three monitors up to 27" with a weight capacity of 6 kg per screen. This full motion monitor arm offers maximum flexibility thanks to its versatile tilt (90°), rotate (360°) and swivel (180°) technology, enabling you to always find the optimal viewing angle for an ergonomic working posture.The NERO desk mount features manual height and depth adjustment, allowing you to adjust your workspace completely to your liking. In addition, the clever 180° stop mechanism prevents the mount from making contact with the wall or separation panel when installed near it. The welded base guarantees optimal stability and sturdiness. The practical cable management system ensures neat routing of cables. In addition, the base of the DS60-600BL3 provides a convenient space to place a phone, for a tidy desk.The DS60-600BL3 is suitable for screens that meet pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. For a seamless connection of the screens, the micro-adjustment function can be used.Installation of the NERO is quick and easy. The Easy-release system makes it easy to attach or detach the screen. Additionally, fixing the clamp to the desk only takes a few actions and, in addition to manual installation, can also be installed using an Allen key or drill for even faster installation. The NERO monitor arm's quick-span lever also allows for easy adjustment of the arm's height without additional tools.With sustainability in mind, the packaging of the NERO monitor arms is 100% plastic-free and made entirely of recyclable cardboard and paper.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
Messgerät für GPU-Stromverbrauch, 3x 8-Pin PCIe auf 1x 12VHPWR (reverse), integriertes OLED-Display, Messung der Leistungsaufnahme, Aufzeichnung des Stromverbrauchs, optimierte Kabelführung
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
AVTEK MOBILE STAND NEXT3 The TouchScreen Mobile Stand Next3 is a lightweight and convenient mobile stand for interactive monitors that significantly simplifies monitor installation, as the successor to the Mobile Stand Next2, it features increased structural stability and the colour of the stand blends well with Avtek TouchScreen monitors. Aesthetic, minimalist design Shelf provided for accessories Adjustable mounting height from 0-181 mm Stable construction Casters for comfortable and quiet stand movement Locking castors for safer installation Easy and convenient mounting of the monitor on the tripod Product warranty: 3 years
Personal Data GuardianThe Natec Owl Privacy Filter is an unassuming overlay for your computer or laptop screen that plays a crucial role in safeguarding personal data and confidential information. It is available in a variety of sizes: 13.3", 14", 15.6", 16", 17.3", 21.5", 23.8", 24", and 27".Take care of your data securityKey FeaturesOperationThe filter is constructed with 10 layers and utilizes micro-louver technology that prevents anyone viewing the screen from the side from seeing its content. Even at a slight angle, the image becomes sufficiently darkened and distorted to hinder data readability, and from 30 degrees, the screen appears completely black.Eye ProtectionThe Natec Owl privacy filter not only safeguards confidential data but also protects your eyes. Spending hours in front of a screen exposes you to harmful radiation; the filter limits its penetration, and its anti-glare properties further reduce eye strain.Additional FeaturesSafe ScreenMade from durable material, the privacy filter also protects your screen from dirt, scratches, and minimizes smudges and fingerprints. It preserves the touch functionality of your display.Easy InstallationEquipped with clips that attach to the monitor frame, the filter can be easily and quickly applied or removed at any timeideal for moments when you want to share your screen's content. For a more discreet, invisible option, transparent adhesive strips can be applied directly to the screen.
The DST-Mini Duo is a high performance and versatile solution for connecting laptops, tablets or smartphones to a range of interfaces including 2 HDMI displays. Featuring all critical interfaces required for a modern workstation, this mini docking station uses a single USB 3.2 Type C cable to connect up to two 4K displays simultaneously, while improving connectivity to other devices through Gigabit Ethernet and USB 3.2 / 3.1 SuperSpeed 10Gbps and 5Gbps ports.This laptop docking station enables the connection of an HDMI display to a laptop at resolutions of 8K 7680x4320 30Hz using DisplayPort alternate mode through the USB Type C port. It also supports video resolutions of 4K 120Hz, making it the ideal tool for high resolution video editing or game streaming.
Diese umfassende Dockingstation von Verbatim verfügt über 17 Anschlüsse - darunter drei hochauflösende HDMI- und zwei DisplayPort-Ausgänge - und unterstützt damit Multi-Display-Anordnungen für fortschrittliches Multitasking. Mit USB-C Power Delivery (PD) werden Geräte schnell aufgeladen, sodass die Einrichtung stets mit Energie versorgt und betriebsbereit ist. Sie nutzt ebenfalls 3.2 Gen 2-Technologien um schnelle, unterbrechungsfreie Dateiübertragungen bereitzustellen und Gigabit-Ethernet für eine stabile Netztwerkverbindung. Zudem verfügt sie über SD- und microSD-Kartenleser-Steckplätze zum direkten Lesen und Übertragen von Dateien. Eine Audiobuchse für Lautsprecher oder Headsets, um einen dynamischen Arbeitsbereich zu schaffen.
Compact aluminum external AXAGON EE25-XA6C ALINE box with USB-C 5Gbps interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. Lightweight yet durable aluminum body provides excellent mechanical protection for the drive and ensures efficient heat dissipation. The elegant brushed surface casing offers a sleek look while preventing unwanted fingerprints. Input: USB 5Gbps (USB 3.2 Gen 1), connector USB-C female. Compatible with USB 480Mbps, USB 10Gbps. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable 50 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Other data: Box dimensions 13 x 129 x 79 mm. Weight 82 g (without cable and disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support.Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 5Gbps external box for 2.5" SATA disk, USB-C - USB-A cable 50 cm long, self-adhesive foam pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
Neomounts AV30-500BL. Toote tüüp: Videobaari kinnitus, VESA-paigaldusliidesed: 200 x 200,200 x 300,200 x 400,400 x 200,400 x 300,400 x 400,400 x 600,600 x 300,600 x 200,600 x..., Ekraani minimaalne suurus: 109,2 cm (43"). ...
Neomounts AV80-500BL. Toote tüüp: Videobaari kinnitus, Kinnituse tüüp: Põrand, VESA-paigaldusliidesed: 200 x 200,200 x 300,200 x 400,300 x 900,300 x 100,300 x 200,300 x 300,350 x 350,400 x 200,400 x.... Laius: 900 mm, Sügavus: 362 ...
