BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Ergotron HX Series 45-475-216. Mounting: Clamp, Maximum weight capacity: 19 kg, Maximum screen size: 124.5 cm (49"), Minimum VESA mount: 75 x 75 mm, Maximum VESA mount: 400 x 400 mm. Height adjustment, Tilt angle range: -75 - ...
Original part number 62742 Product name Delock Converter USB 3.0 A male SATA 6 Gb/s 22 pin with 2.5 Protection Cover Producer Delock Class of product Others controllers/adapters Bus type USB 3.0 Internal connectors 1 x SATA External ports 1 x USB 3.0 Supported operation systems Windows 10 Windows 7/8 Linux Kernel 2.6.30 Bundle include Users manual Low-profile card No Length 129 mm Width 75 mm Height 16 mm Net weight no data Gross weight no data Additional information Chipset: JMS567 Suitable for 2.5" SATA HDD / SSD Support 3.3 V / 5 V HDD / SSD HDD height up to 9.5 mm Supports SATA 1.5 Gb/s, SATA 3 Gb/s and SATA 6 Gb/s Data transfer rate up to 6 Gb/s LED indicator USB bus powered cable colour: black protection cover colour: grey Cable length without connector: 15 cm
Carlinkit TBOX ULTRA Carplay&Android Wireless AdapterCarlinkit TBOX Ultra is an advanced wireless adapter that transforms your car's factory multimedia system into a full-fledged entertainment and navigation platform. The device runs on Android 15.0 and is equipped with an octa-core Qualcomm SM6350 processor, which guarantees smooth application operation and quick access to online functions. Thanks to its integration with CarPlay and Android Auto, the adapter enables wireless connection to a smartphone, offering convenience of use without the need for cables. SIM card and Wi-Fi hotspot support allows for a permanent internet connection, even while driving.Modern technology and fast connectivityThe built-in 4G modem supports a wide range of LTE-FDD, LTE-TDD, and WCDMA bands, ensuring a stable mobile connection in almost every region of the world. The device works with operators in Europe, North America, Asia, and Japan. In addition, support for Wi-Fi in 802.11 a/b/g/n/ac (2.4G + 5G) and Bluetooth 5.1 standards allows for reliable wireless connectivity with other devices. This allows the TBOX Ultra to stream music, make calls, and use Internet services without interference.Extensive navigation capabilitiesThe adapter is equipped with a global positioning system (GPS) with support for GPS, GLONASS, BeiDou, and Galileo. This ensures fast and accurate location determination, which translates into effective navigation application performance even in difficult road or urban conditions.Fully functional Android platformTBOX Ultra offers an open Android platform with the ability to download applications directly from a dedicated store. Users have complete freedom to personalize the system – from installing music apps and instant messengers to vehicle management tools. The device has 8 GB of RAM and 128 GB of fast UFS internal memory, expandable to 512 GB using a Micro SD card.Wide compatibility and easy installationThe device is compatible with most vehicles factory-equipped with wired CarPlay or Android Auto. It supports wireless connection with iPhones from model 6 (iOS 10.0+) and smartphones with Android 11.0 or newer. The connection is made via a USB-C connector, and thanks to an intuitive switch, the user can easily change the operating mode between CarPlay and Android Auto. The housing is made of durable ABS plastic. Its compact dimensions (90 x 84.9 x 17.1 mm) allow the device to be easily hidden in a glove compartment or center console.Included2x USB-C to USB-C data cable, USB-A to USB-Cdual USB power cableuser manual ManufacturerCarlinkitModelTBOX Ultra (4G)ProcessorQualcomm SM6350 (2× ARM Cortex-A77 @ 2.0 GHz + 6× ARM Cortex-A55)RAM / ROM8 GB LPDDR4 / 128 GB UFS (Expandable with Micro SD card up to 512 GB)Wi-FiIEEE 802.11 a/b/g/n/ac (2.4G + 5G)Bluetooth5.1 BR/EDR/BLELTEFDD-LTE, TDD-LTE, WCDMAGPSGPS / GLONASS / BeiDou / GalileoPortsUSB-C (car input), nano SIM card slot, Micro SD card slot, LEDImage resolutionAdaptive – compatible with factory system resolutionPhone compatibilityiPhone 6 and newer (iOS 10.0 or higher); Android 11.0 and newerVehicle compatibilityCars with factory wired CarPlay or Android AutoPower supply5V ± 0.2V / 2.0APower consumption5WDimensions90 × 84.9 × 17.1 mmProduct weight102 gWeight with packaging231 gPackaging dimensions110 × 106 × 39 mmHousing materialABSInterface languageMultilingual
VESA soundbar mount for TV adjustable Maclean universal VESA mount for soundbar, 15kg max, MC-335 Maclean MC-335 soundbar mount is a universal solution for mounting soundbars of various brands, such as LG, JBL, Creative, Philips, Samsung, Yamaha, Sony, Blaupunkt, Sharp, Thomson, Panasonic. The design of the mount allows the soundbar to be mounted both above and below the TV screen. Such an arrangement allows for better sound compared to the TV's built-in speakers. As a result, you can enjoy more immersive and clear sound while watching movies, listening to music or playing games. The maximum load is 15 kg, which ensures the safety and stability of the mounted equipment. The MC-335 mount is the ideal solution for those who want to integrate a soundbar into their TV, regardless of its brand. Thanks to its compatibility with VESA mounting holes, the mount can be easily installed on most TVs. The mount allows the soundbar to be mounted both above and below the screen, making the best use of space and improving the sound quality in the room. This product is especially recommended for those who value order and aesthetics in the living room
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product's key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 2GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
Specification:Processor 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographyextensions, 512KB per-core L2 caches, and a 2MB shared L3 cacheFeatures:• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2• Dual 4Kp60 HDMI® display output with HDR support• 4Kp60 HEVC decoder• 4GB LPDDR4X-4267 SDRAM• Dual-band 802.11ac Wi-Fi®• Bluetooth 5.0 / Bluetooth Low Energy (BLE)• microSD card slot, with support for high-speed SDR104 mode• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation• 2 × USB 2.0 ports• Gigabit Ethernet, with PoE+ support(requires separate PoE+ HAT)• 2 × 4-lane MIPI camera/display transceivers• PCIe 2.0 x1 interface for fast peripherals(requires separate M.2 HAT or other adapter)• 5V/5A DC power via USB-C, with Power Delivery support• Raspberry Pi standard 40-pin header• Real-time clock (RTC), powered from external battery• Power button
High-Definition Multimedia Interface (HDMI) digital audio/video interface cableSupports data transfer bandwidth of up to 10 Gigabits/secAllows bi-directional communication between smart HDMI devicesSupports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 HzSupports HDMI Ethernet Channel 100 Mbps function (HEC)Supports Audio Return Channel technology (HARC)
DisplayPort -> HDMI active cable - adapter AXAGON RVD-HI14C2 to connect HDMI monitor/TV/projector to the computer with the DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. It is an ideal solution - you don't need a HDMI cable and converter. With this active cable everything is integrated into one compact unit. The cable is only one-way, i.e. DisplayPort to HDMI, not otherwise. Input: DisplayPort v1.2 DP male connector with latch (M) connector latch control button Output: HDMI v1.4b HDMI A (M) male connector Supported resolutions:Resolution and frequency depend on monitor and graphics adapter. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection / disconnection of the device while running HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 1.8 m weight only 70 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by a cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDMI cable length 1.8 m, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Height-Adjustable Monitor Stand, 1732 inches, up to 8 kg Position your screen perfectly for an optimal, ergonomic setup Compact, space-saving solution Product Features: Height-adjustable, fully movable monitor stand 10-level height adjustment adapts to different monitor sizes and provides a better viewing height Allows screen rotation and tilt, as well as switching between landscape and portrait mode Works with almost any LCD monitor (max. 32" / 8 kg) Sturdy base plate for secure placement on any desk Built-in cable management for an organized and tidy workspace VESA compliant, max. 100 × 100 mm
Laiendab 4K HDMI 18G signaale üle 50 m kaugusele standardse võrgukaabliga Toetab kuni 3840x2160@60Hz 4:4:4 8bit resolutsiooni, HDR-i toetusega HDMI-läbivooluväljund loob täiendava vaatetsooni koos lokaalse ekraaniga PoC (Power over Cat.6) funktsionaalsus, mis tagab toite ühest toiteallikast. 2-aastane garantii Lindy Cat.6 HDMI 18G & IR Extender koos PoC-ga on tõhus ja usaldusväärne lahendus kvaliteetse 4K HDMI-signaali laiendamiseks kuni 50 m (164.04ft) kaugusele standardse Cat.5e/6 võrgukaabli abil. HDMI 2.0 18G spetsifikatsiooni tugi võimaldab edastada väga üksikasjalikke 4K Ultra HD resolutsioonide andmeid. Tänu High-Dynamic Range'i toetusele on videosisu vaadatav suurema heleduse, suurema mustade ja valgete kontrasti ning palju laiema värvigammaga, mis sobib ideaalselt tõelise kodukinoelamuse või silmatorkava digitaalse reklaami jaoks jaekeskkondades. HDCP 2.2 vastavus võimaldab 4K-videosisu, mis pärineb kopeerimisega kaitstud allikatest, näiteks Blu-Ray-filmidest, meediamängijatest ja voogedastusteenustest, vaadata ilma ühilduvusprobleemideta. Kadudeta audioformaatide, sealhulgas DolbyTrueHD ja DTS-HD toetus lisab videosisule võimsa mitmekanalilise heli, pakkudes vaatajale täiustatud elamust ja realistlikkuse tunnet. Extenderil on saatja HDMI-läbipääs, mis võimaldab samaaegset vaatamist kohalike ja kaugkuvarite abil. Selline mitmekülgsus pakub sobivat lahendust kasutamiseks erinevates stsenaariumides, näiteks hariduslikes esitlussüsteemides, kodukinos, meelelahutussüsteemides või messidel. Sisseehitatud EDID dip switch võimaldab kasutajal kontrollida, millist EDID-d võetakse kummaltki kuvarilt, muutes paigaldamise ja konfigureerimise lihtsaks, tagades maksimaalse ühilduvuse HDMI kuvarite ja projektoritega. PoC võimaldab nii toite- kui ka andmesignaalide edastamist üle Cat.6 kaabli punktist-punkti konfiguratsioonis, mis lisab paindlikkust, kuna nii saatja kui ka vastuvõtja jaoks on vaja ainult ühte toiteallikat. Ideaalne juhul, kui toitepunktid on piiratud. Tänu IR-läbipääsule saab allikaseadmeid ühilduvate infrapunapuldi abil tõrgeteta juhtida paigalduse kaugkuvarite poolelt, kasutades ühilduvaid infrapunapuldisidemeid. See tagab kasutajale lihtsa ja täieliku kontrolli. Pange tähele: See toode ei ole mõeldud kasutamiseks koos aktiivsete võrguseadmetega ja seda tohib kasutada ainult punkt-punkt ühenduses.
Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB C-type 2-ühenduse tüüp: HDMI naissoost, HDMI naissoost värv: Space Gray Lisaandmed: Expand your desktop to two external HDMI monitors, connect projektor või television koos HDMI liides via new USB-C või Thunderbolt, adapter allows you to transfer video in 4K Ultra HD resolutsioon ja stereo sound, 1x USB-C 3.1 ühenduspesa, transfer rate Kuni 10 Gbps, Graphic liides Lisainfo: i-tec USB-C to Dual HDMI Video Adapter
The HX Monitor Arm is the perfect accessory to add flexibility and superior ergonomics to your monitor or TV. The sleek new design frees up space and allows positioning of your display for greater productivity.Sleek and streamlined, it accommodates large monitors weighing up to 42 lbs (19 kg). Extension/retraction motion and height adjustment capability promote user comfort.- Increases viewing comfort: Helps reduce eye, back and neck strain- Patented CF™ motion technology provides premium ease-of-use display adjustment- Cable management feature routes cables tightly under the arm and through the extension, out of the way- Eliminates scrolling: Rotate screens for portrait viewing of photos and documents- Rotation-stop on base limits range to 180° and prevents monitor from making contact with wall- Folding arm frees up space in constrained areas- Upgrade this arm with the HX Triple Bow Kit to create a triple monitor arm- Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free height adjustmentMaksimaalne kaal (mahutavus)19,1 kgMaksimaalne ekraanisuuruse sobivus106,7 cm (42")SobilikTVPaigaldussüsteemi ühilduvus (min)75 x 75 mmPaigaldussüsteemi ühilduvus (max)400 x 400 mmToetatud ekraanide arv1PaigaldusBolt-throughVESA-paigaldusliidesed75 x 75,100 x 100,200 x 100,200 x 200,400 x 200,400 x 400,400 x 300 mmKaldenurk-75 - 75°Liikumisulatus-180 - 180°Rotatsiooni nurk360°Toote värvValgePakendi laius305 mmPakendi sügavus488 mmPakendi kõrgus178 mmPakendi kaal8,3 kg
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product's key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
240W Superfast Charging: Empower your devices with Superb 240W PD 3.1, charging a MacBook Pro 16" to 56% in 30 minutes. Backward compatible with 140W/100W/65W devices, ensuring future-proof performance for laptops, phones, and accessories Lightning 80Gbps Data Transfer: Transfer a 20GB 4K movie in just 3 seconds with USB4 Gen4's 80Gbps bandwidth, 8x faster than standard USB C cables. Perfect for photographers, developers, or anyone moving massive files between SSDs, NAS, or dual computers Industry Leading HD Display: Unlock cinematic visuals with DisplayPort 2.1 mode, supporting up to 16K@60Hz and extending to dual 8K@60Hz or triple 4K@144Hz Display. Ideal for gaming rigs, 3D rendering workstations, or multi screen traders demanding ultra smooth, zero lag visuals All-in-One Solution: A single USB C to C cable handles 240W charging, 80Gbps data syncing, and 16K max video output. Seamlessly connect USB C laptops, such as MacBook Pro Air, Dell XPS, phones,such as iPhone 17/16, Galaxy S24, tablets like iPad Pro, monitors, and accessories. Supports Thunderbolt 4 3, USB4, USB 3.2 3.1 3.0, and more Sturdy and long-lasting: Solid and durable nylon braided cable ensures longer service life up to 10,000 bends. Double sided USB C connectors with over molded strain relief are designed for frequent insertions, Aluminum housing, high purity copper wire, and triple shielding will keep long lasting fast charging performance Wide Compatibility: The 240W USB C fast charger cable fits all USB C or thunderbolt 3/4 devices, like iPhone 17 / Air / Pro / Pro Max, iPhone 16/15 Pro Max Plus, Galaxy S25/S24/S23 Ultra, MacBook Pro Air, Xiaomi, iPad Air 6, iPad Pro 2024, Dell XPS/17/15/13, Mate 70/Pro/P70, Pixel 9/8/7 Pro, Surface Pro 7, USB-C monitor, NVMe SSD, Docking Station, Switch, PowerBank, Camera, USB C Chargers, Navigation and more upcoming devices with USB-C ports
The DIGITUS cable management channel is a practical solution designed to enhance your workspace by neatly organizing and concealing cables under the desk. Its under-desk mountable design not only helps in maintaining a tidy area but also contributes to a safer working environment by reducing the chances of tripping over loose cables. Made from steel and finished with a powder coat, this cable management tray is durable and resistant to wear, making it a suitable investment for both home and office settings. Embrace a clutter-free desk with DIGITUS's efficient cable management solution.
Kaablikanal tugev spiraalne kaablikest, nt telekaablite, laadimiskaablite või toitejuhtmete ohutuks ja praktiliseks varjamiseks. 20 mm läbimõõduga tugevast plastist kaablijuhik sobib ideaalselt laua korraldajaks ja lihtsustab kaablijuhtimist. 2,5 m pikkust kaablikorraldajat saab vajadusel mõõtu lõigata. Lauakaabli korrastamise kaablile mõeldud tagasitõmbamise abivahend kuulub tarnekomplekti. Kaabli korrastamine hoiab ära põrandal või laual tekkiva segaduse, mis tuleneb sõlmedest või lemmikloomade poolt tekitatud kahjustustest.
CAT 6 slim võrgukaabel U/UTP, must, CU The SLIM network cable can be used to connect different network devices, such as a laptop to a switch. Due to the small cable diameter the cable saves space during transport and usage. unshielded LAN/network cable to connect network components with 2 x RJ45 connectors Low bending radius, extremly flexible, ideal to move to save space behind baseboards low cable diameter only 3.6 mm suitable for Power over Ethernet (PoE) short connector type with latch protection, with gold plated PINs length specification on strain relief pair-sequence acc. to EIA/TIA 568B
Seda Delocki võrgukappi saab kasutada statiiv- või seinakinnitusena ning see on ideaalne 10″ seadmete, nt patch-paneelide paigaldamiseks.Lihtne juurdepääs seadmeteleEemaldatavad külgpaneelid võimaldavad lihtsat ja kiiret juurdepääsu võrgukapi tagaosas asuvatele paigaldatud seadmetele.Lukustatav esiuks koos vaateaknagaVõrgukappi saab suurema turvalisuse tagamiseks lukustada. Vaatamisaken võimaldab igal ajal näha võrgukapi sisemust.Optimaalne ventilatsioonisüsteemÜlemise kaaneplaadi integreeritud ventilatsiooniavad tagavad paigaldatud seadmete optimaalse ventilatsiooni.Tehnilised üksikasjad10″ võrgukapp alusele või seinale paigaldamiseks, 8U2 profiiliriba eesUksesangad on muudetavalt valitavad (vasakule või paremale)Kaabli läbiviik võimalik põrandas ja üleval, sh kaanekattedTurvaklaasiga esiuks, lukustatavEemaldatavad külgpaneelidVentilatsiooniavad ventilatsiooni jaoksPaigaldussügavus: max. 220 mmKandevõime: max. 45 kgKaal: ca 9 kgVärv: mustMaterjal: metallMõõtmed (LxSxK): ca. 435 x 350 x 280 mmPakendi sisuVõrgukapp2 x võtmed20 x kruvi M620 x allasõrestik20 x kinnitusmutter
TPE Halogenfree80Gbps8k60Hz240WWorks with Thunderbolt 4Supports DP2.1 Altmode See the full Premium Assortment at the following link:https://www.eetgroup.com/en-zz/campaigns/microconnect-premiumWith this Premium MicroConnect USB-C cable you can now go all-in with a fully specced Gen2 USB-C cable, capable of 80Gbps datas transfers, 240W of Power Delivery, 48V/5A of Fast-Charging performance, and even 7680 × 4320p Ultra HD 8K video output at 60Hz! It's amazing and it's all here in this cable. Warranty (Month(s)): 300Net Weight (Product,kg): 0,015Height (Product,cm): 19,0Width (Product,cm): 9,0Depth (product,cm): 0,5Gross Weight (Package,kg): 0,025Cable length (m): 0,5Conductor material: CopperConnector 1: USB CConnector 1 form factor: StraightConnector 1 gender: MaleConnector 2: USB CConnector 2 form factor: StraightConnector 2 gender: MaleProduct colour: BlackUNSPSC Code: 43211617USB Power Delivery (USB PD): YesUSB Power Delivery revision: 3.1USB Power Delivery up to (W): 240,0USB version: USB4 Gen 3x2
Seda Delocki kangast lindi saab kasutada elektrikaablite isoleerimiseks ja kaablikomplektide mähkimiseks, nt autotööstuses.Suur paindlikkus ja rebitavusTeip on valmistatud paindlikust kiudmaterjalist ja seda saab hõlpsasti käsitsi lahti rebida, ideaalselt väikeste ja kiirete paranduste tegemiseks. Kaitsekanga materjal pakub ka optimaalset temperatuuri- ja korrosioonikindlust.LõigatavTeibi pikkust saab soovi korral kääridega ka individuaalselt lühendada.SpetsifikatsioonPikkus: ca. 25 mLaius: ca. 25 mmIsekleepuvRebitavTõmbetugevus: kuni 6 kgKeskkonnatemperatuur: -40 °C ~ 150 °CMaterjal: PET-kangasVärv: mustPakendi sisuKangaslint
Kui teil on vaja LiPo akusid laadida, teeb see lihtne laadija just seda ja teeb seda kiiresti! SparkFun LiPo Charger Basic on eemaldatud kõigist funktsioonidest ja teeb hästi ainult ühe asja – laeb 3,7 V LiPo elemente kiirusega 500 mA. See on mõeldud üheelemendiliste liitiumioon- või liitiumpolümeerakude laadimiseks. Kontrollige allolevat andmelehte, et näha, kas see töötab teie akuga. Plaat sisaldab laadimisahelat, oleku LED-i, teie aku pistikut (JST-tüüpi, mida kasutatakse meie kaasasolevates akudes) ja mikro-USB-pistikut. Väike kinnitusava võimaldab seda laadijat hõlpsasti projekti sisse lülitada. Märkus. See versioon kasutab mikro-USB-kaablit. Meil on see laadija ka mini-USB ühendusega. Mõõdud: 29,4x10,8mm
Lihtne kinnitamine otse monitorile: Mi Computer Monitor Light Bar kinnitub otse monitorile ega võta töölaual kübetki ruumi. Asümmeetriline viimistletud disain: Valgusti disain on peensusteni läbimõeldud, nii et see ei tekita ekraanil peegeldusi ning tagab mugava töötamise ka pikkade töötundide vältel. Kõrge Ra95 värviedastusindeks: Valgusti värviedastusindeks küündib kuni Ra95, tagades loomutruud värvid ja detailid. Võbelusevaba tehnoloogia vähendab ka pinget silmadele. Vähem takistusi, rohkem vabadust: Koos lambiga on komplektis mugav juhtmevaba juhtpult, millega saab muuta valguse temperatuuri ja eredust. USB-C ühendus: Monitoriga ühenduses olles läheb valgusti automaatselt tööle, kui arvuti sisse lülitad. Valguse reguleerimine: 2700K - 6500K
Surugaas raskesti ligipääsetavate kohtade tolmust puhastamiseks. Ohutus ja kasutusmugavus võimaldavad eemaldada saasteaineid elektroonilistest seadmetest, foto-optilistest osadest, täppistehnikast, elektriseadmetest ja paljudest teistest ilma sekkumata. Tolm ja muud osakesed puhutakse välja kõrgsurve all oleva surugaasiga. Ei jäta puhastusjälgi. Mahutavus 600ml.
SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
Full-motion desk display mounting arm, 17”-35” Position your screen perfectly Lightweight and tilting design - Monitor desk mount with single monitor arm - Full-motion arm rotates, extends and retracts, tilts to change reading angles, and allows to rotate display from landscape-to-portrait mode, etc - Enables easy ergonomic positioning for reduced strain - Works with almost any LCD monitor (max. 35") - Durable adjustable gas-spring suitable for monitors of 3 - 10 kg - VESA compatible (100 x 100 mm and 75 x 75 mm) - Strong desk clamp or grommet for easy and secure fixation on your desk
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A
