Varia lisaseadmed

Natec Multi-Port Adapter, Fowler, USB-C, HDMI, USB 3.0

Product kirjeldus: Lanberg - air duster Product Type: Air duster Package Content: 600 ml spray

CLUB 3D USB TYPE A GEN 1 ACTIVE REPEATER CABLE 10METER / 32.8FT SUPPORTS UP TO 5Gbps

Dimensions: 90x130x230 mm Weight: 0.27 Accessories included: 1 x power supply, 1x USB Type-C to Type-Ccable, 1x USB Type-C to Type-A cable, 1x screw set, 1x screwdriver, 1x stand, 1x manual

DisplayPortiga varustatud seadme ühendamine 4K HDMI kuvariga või projektoriga Toetab kõrgekvaliteedilisi resolutsioone kuni 4K@60hz Kõrge dünaamilise ulatuse tugi tagab sügavamad mustad, heledamad valged ja laiema värvigamma. Aktiivne kiibistik täiustatud ühilduvuse tagamiseks erinevate graafikakaartidega 2-aastane garantii   Lindy aktiivsete DisplayPort-HDMI-kaablite tootesari ühendab suurepärase jõudluse ja stiilse disaini, et tagada DisplayPort 4K@60Hz signaalide kvaliteetne muundamine HDMI kuvarile või projektorile väljastamiseks. See aktiivkaablite valik on varustatud sisseehitatud kiibistikuga, mis mitte ainult ei taga usaldusväärset ühendust, vaid parandab ka ühilduvust nii kaherežiimiliste kui ka mitte-duaalrežiimiliste graafikakaartide ja allikaseadmetega, mis sobib ideaalselt DP-graafikakaartide, sülearvutite ja arvutitega kasutamiseks, vältides samal ajal vajadust täiendavate adapterite järele. Tänu kuni 4096x2160@60 Hz resolutsioonide toetusele ja täiendavale High Dynamic Range'i toetusele saab 4K-sisu vaadata kristallselge selguse, parema kontrasti ja elutruumate värvidega. Need kaablid sobivad suurepäraselt pilkupüüdvate jaemüügiekraanide, innovaatiliste töökeskkondade või kaasahaarava videomängu loomiseks spordibaarides ja kodukinos, samas kui pakkimata mitmekanalilise heli toetus võimaldab muljetavaldavat kolmemõõtmelist ruumilist heli, mis täiendab üksikasjalikku ja selget videot. AMD Eyefinity-tehnoloogia toetus annab kasutajale ka kulutõhusa võimaluse luua kuni 3 või enamast monitorist koosnev mittestandardse kuvasuhtega või ülikõrge resolutsiooniga kuvar. See funktsioon võimaldab kasutajal käivitada samaaegselt mitut rakendust eraldi ekraanidel, parandades tootlikkust töökohal või luues laiekraanilise mängukogemuse.   Pange tähele: Heliväljund üle HDMI on toetatud ainult siis, kui sülearvuti või lauaarvuti graafikakaart toetab heliväljundit üle DisplayPort. Mitmed sülearvutite pardagraafikaadrid, näiteks Mobile Intel 4 Series Express Chipset sülearvutites EI toeta heliväljundit üle DisplayPort, isegi kui helikontrollerite jaoks on paigaldatud HDMI-tugi (Intel High Definition Audio HDMI Service). Sellistel juhtudel tuleb luua eraldi audioühendus. Pange tähele: Mõned Nvidia uusimad draiverid ei tööta korrektselt 4k@60Hz 4:4:4:4 puhul, kui nad konverteerivad DP/mDP-st HDMI-sse, ja töötavad ainult 4k@60Hz 4:2:2 puhul.

USB Type C Port Blockers are useful little devices that system administrators can use to physically prevent access to USB ports. USB Port Blockers allow locks to be inserted and removed from USB ports to stop unauthorized users from inserting pen drives, USB mass storage and mobile devices into shared workstations or devices with USB ports in public spaces.To use, simply attach a lock to the key and insert it into the USB port. Release the sliding mechanism on the key to leave the lock in place. To remove, simply insert the key back into the lock and pull away.

ATEN CS22HF. Klaviatuuri pordi tüüp: USB, Hiire pordi tüüp: USB, Videopordi tüüp: HDMI. HD tüüp: Full HD, Maksimaalne resolutsioon: 1920 x 1200 pikslit, Video ribalaius: 60 Hz. Toote värv: Must, Korpuse materjal: Plast, Kaabli ...

GEMBIRD CC-DPM-DVIM-1M Gembird cable Displayport (M) - > DVI-D (24+1) 1m

Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.

• Garantii: 24 kuud, kaabli pikkus: 3m • DisplayPort male to HDMI-A male

GEMBIRD A-USB3C-LAN-01 USB type-C Gigabit network adapter space grey

ICYBOX IB-1807MT-C31 External enclosure for M.2 NVMe SSD USB 3.2 Gen 2 Type-C

Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Aluminium external AXAGON EEM2-SBC RAW box with USB 3.2 Gen 2 interface is designed for SATA M.2 SSD disks. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate amounts to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern functions, e.g. UASP, TRIM and allows reading S.M.A.R.T. information that monitors the status of the disk. Standby support when idle. SATA M.2 SSD drives can be used in the external box. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant brushed finish that prevents unwanted fingerprints. The rounded box design promises pleasant use. The aluminum box body provides very good cooling of the inserted M.2 SSD disk. By inserting the M.2 SSD in the box, you will easily create fast compact external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps. Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. Device support: SATA M.2 SSD disks, designed for B+M key and B key card formats, NGFF 75-pin B key slot for SATA M.2 drives. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports transmission rates 10.000 / 5.000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Support of B+M key or B key SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the box is determined by used disk speed (theoretically up to 650 MB/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - Drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body with cooling holes helps to cool the M.2 SSD disk. Connection via USB 3.2 Gen 2 type C female connector. USB Type C male / USB Type A male cable 20 cm long is included. Other data: External box dimensions 94 x 41 x 10 mm. External box weight 36 g (without USB cable and M.2 SSD disk). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher, Android (OS and device support required). Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed. Package contains: USB-C 3.2 Gen 2 external box for SATA M.2 SSD, USB type C - type A cable, 20 cm long, mounting material, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Digitus kaabel DP to HDMI Adapter DB-340202-018-S

Axagon kettaboks EE35-GTR ext box USB3.2 Gen1 3.5" HDD SAT

Ugreen CM511

Ugreen MFI Lightning – 3,5 mm minipistikuga helikaabel AUX kõrvaklappide adapter hall (70509)

Laadib korraga kuni 6 tahvelarvutit, nutitelefoni ja/või sülearvutit või MacbookiKuni 6 tahvelarvuti, nutitelefoni ja/või sülearvuti või Macbooki samaaegne laadimine kuni 140 W või muude USB-seadmete laadimine.Max. 5V 2,4A laadimine ühe USB A-tüüpi pordi kohta, max. 30W või 140W laadimine USB Type C pordi kohtaToetab USB Power Delivery: 2x PD 3.0 kuni 30W kumbki ja 1x PD 3.1 kuni 140WAku laadimisstandard 1.2 toetab kiirlaadimist, Apple'i laadimisprotokolli, QC 3.0/4.0 ja Samsung AFC toetabLindy 160W 6-pordiline USB-laadimisjaam võimaldab laadida kuni 3 USB-seadet A-tüüpi ja 3 C-tüüpi kaudu, nagu tahvelarvutid, nutitelefonid või sülearvuti või Macbook. Iga USB A-tüüpi port võib pakkuda kuni 5 V 2,4 A, kaks USB C-tüüpi porti võivad pakkuda kuni 30 W kumbki ja üks isegi kuni 140 W, et rahuldada kõige energiamahukamaid seadmeid. Kui kõik 6 porti on hõivatud ja/või kui koguvõimsus on suurem kui 160W, toimub koormuse tasakaalustamine.Tänu nutikale laadimisfunktsioonile ja paljude erinevate protokollide, nagu QC 3.0 ja 4.0 (ainult C-tüüpi porte), Samsung AFC ja Apple 5V 2,4A laadimisprotokolli ning BC 1.2 (ainult A-tüüpi porte) toetusele suudab see USB-laadimisjaam tuvastada ühendatud seadme, et reguleerida automaatselt laadimisvoolu kiire ja turvalise laadimise jaoks.USB Power Delivery Revision 3.1 võimaldab suuremat võimsust kuni 140 W rakendustele, sealhulgas suurematele sülearvutitele, mänguriarvutitele, Macbookidele, tööjaamadele või dokkimisjaamadele. Veel 2 Type C PD 3.0 porti, millest igaüks kuni 30 W võimaldab nutitelefonide ja tahvelarvutite kiiret, paindlikku ja turvalist laadimist.See USB-laadimisjaam pakub ka ülevoolu-, ülepinge- ja lühisekaitseid, et vältida seadme kahjustamist liigse voolu poolt.Plastikust vaheseinad saab kokku panna ja seadme ülaosas seista, mis võimaldab erineva laiusega seadmeid eri suurusega tahvelarvutite või mobiiltelefonide jaoks. See toode sobib ideaalselt kasutamiseks koolides, raamatukogudes, hotellides, restoranides või mis tahes kohas, kus kasutatakse mitut seadet. Laadimisjaama sujuvaks kasutamiseks on kaasas riigispetsiifilised toitekaablid, mis on ideaalsed ülemaailmsete ürituste või välismaal asuvatesse rajatistesse integreerimise jaoks.

CLUB3D CAC-1087. Kaabli pikkus: 3 m, Pistmik 1: DisplayPort, Pistmik 2: HDMI

DS70-700BL1 Neomounts by Newstar monitor desk mount Neomounts by Newstar DS70-700BL1 full motion monitor desk mount for 17-27" screens - Black

USB-C security key FW 5.7.4

The HDMI extender kit is a high-performance video signal extender system consisting of transmitter and receiver modules. Extends the range of the Full HD audio-video signal up to 120 m using a CAT6 network cable (point-to-point connection). Additionally, you can use network switches and single receiver modules (DS-55518) to transmit video content over your existing network infrastructure (IP connection) to up to 253 displays and extend the coverage to an unlimited distance. Additionally, the integrated bidirectional infrared (IR) signal interface allows remote control of the input signal source via the output screen (on the receiver side). The solution allows you to extend the audio-video signal in Full HD via a CAT 6 cable over an unlimited distance via your existing network infrastructure or using commercially available network switches Extends the range of the Full HD audio-video signal via a CAT 6 cable to a distance of up to 120 m (point-to-point connection) Resolution support up to max. 1080p/60 Hz, Full HD Support for CAT 6, CAT 6A, CAT 7, CAT 8 network cables The infrared (IR) signal interface allows remote control of the input signal source via the output screen You can use additional receiver modules (DS-55518) and your existing network infrastructure to display video content on up to 253 screens (IP connection) Housing: metal Suitable for wall mounting

DS70-250BL2 Neomounts desk monitor arm Neomounts DS70-250BL2 full motion monitor arm desk mount for 17-32" screens - Black The Neomounts DS70-250BL2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.

WL70-440BL11 Neomounts by Newstar tv wall mount Neomounts by Newstar WL70-440BL11 full motion wall mount for 17-32" screens - Black

The Gembird DD-U3M2 SSD docking station offers a streamlined way to connect M.2 drives to your computer. With its USB-C to USB-A cable and accompanying dongle, this docking station ensures compatibility with various devices while maintaining a tidy setup. Designed for hot-swap capabilities, it allows users to easily access their SSDs without needing to power down, providing flexibility in data management.Featuring a data transfer rate of 10 Gbit/s, the DD-U3M2 enhances productivity with rapid file transfers. The inclusion of UASP transfer protocol and TRIM support further optimizes performance, making this docking station a valuable addition to any workflow. With compliance to several standards including ISO 9002 and RoHS, it upholds quality and environmental safety.

Enhance storage capabilities with the DIGITUS storage enclosure. Built for M.2 NVMe cards, this product supports a data transfer rate of 20 Gbps, ensuring speedy access to your files and applications. The aluminum design provides durability while facilitating heat dissipation, making it suitable for various environments with operating temperatures from 5°C to 50°C. With a compact length of 25 cm, this USB-C to USB-C external cable ensures a tidy and efficient setup without compromising performance.This storage enclosure supports up to 8 TB capacity, allowing ample space for your essential data. The LED indicator offers a clear view of the device's status, providing real-time feedback on its operation. It is user-friendly with its Plug-and-Play capability, seamlessly connecting via USB 3.2 (Gen 2) to your devices. Ideal for those looking to expand storage options without the hassle of complex installations.

Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.

The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.

The Mercusys MA530 V1 network adapter enhances connectivity and performance for your computer setup. Designed with functionality and convenience in mind, this external, nano-sized Bluetooth adapter integrates seamlessly into any USB 2.0 port without obstructing other connections. Equipped with Bluetooth 5.3 standard, it ensures faster data transfer speeds, extended range up to 20 m in open space, and reliable performance across a broad range of Bluetooth devices. Suitable for home or office use, the MA530 V1 operates efficiently in diverse environmental conditions, supporting humidity ranges from 10 - 90% (non-condensing) and temperatures from 0°C to 40°C. Experience enhanced connectivity with the Mercusys MA530 V1.

Ugreen LP339

AXAGON BUCM32-CM15AB cable USB-C USB-C 3.2 Gen 2, 1.5m, PD 100W, 5A, 4K HD, ALU, braid, Black

Assman DIGITUS 45-70"

The Neomounts DS90-325BL1 is a full motion height adjustable desk mounted workstation for screens up to 32", keyboard and mouse. The mount can support screens up to 9 kg (curved: 6 kg), while the keyboard tray can support max. 1 kg. The versatile tilt (70°), rotate (360°) and swivel (180°) technology allows the monitor arm to change to any viewing angle to fully benefit from the capabilities of the screen. The keyboard tray includes a wrist support and mouse pad for optimum comfort. The workstation desk mount has a large height adjustability range from 44-95 cm and can be used both seated and standing. To ensure quick repositioning and the most optimal working position, the DS90-325BL1 features gas spring height adjustment for both the monitor arm and keyboard tray arm. The smart cable management system ensures orderly routing of the cables. The DS90-325BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm and is equipped with a Quick-release VESA system for fast and easy installation. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available.

Sülearvuti laadija Dell 14P3N

The Dr. Power III power supply tester from Thermaltake has been completely redesigned and supports all ATX power supplies available today, up to ATX12V v3.1. The device reliably detects the SENSE0/SENSE1 sideband signals of the latest PCIe 12+4 pin connector and distinguishes power levels of 150W, 300W, 450W, and 600W, ensuring compatibility with a range of PCIe Gen 5.1 graphics cards and components. The LCD display allows the user to easily and clearly read and interpret the test results. The real-time LCD monitoring shows the output voltage for +12V, +5V, +3.3V, and +5Vsb. Instant feedback facilitates the immediate assessment of the power supply performance, enabling informed decisions regarding the system’s power supply. Manual and automatic test modes are available, allowing quick diagnostics of the power supply's output status. The Dr. Power III power supply tester features a robust integrated diagnostic system that identifies issues such as under-voltage, over-voltage, missing voltage, and PG alarm systems. If no error occurs during the test, the LCD backlight remains white. Once an error is detected, the LCD backlight turns red, and a beeping sound is triggered.

The Club 3D CAC-1188 is a versatile video adapter cable designed to connect Mini DisplayPort devices to HDMI displays. This active adapter supports 8K at 60Hz and 4K at 120Hz, offering vibrant and fluid visuals. Additionally, it supports Dynamic HDR10, which enhances contrast and color accuracy, delivering a satisfying viewing experience.Built with reliable nickel-plated connectors, the CAC-1188 offers durability and consistent performance. The adapter includes a hang box package for easy storage and transport. Compliant with major standards such as FCC, RoHS, and HDCP 2.2, this product meets necessary regulations and assures compatibility across a broad range of devices.

Option for Models 11" - 15.6

• Maksimaalne kaal (mahutavus): 9 kg • Ekraani minimaalne suurus: 43,2 cm (17") Ekraani maksimaalne suurus: 86,4 cm (34") • Toetatud ekraanide arv: 2 • Klamber/läbiv polt Kinnituse tüüp: Laud • Paigaldussüsteemi ühilduvus (max): 100 x 100 mm • Kalde reguleerimine • Juhtmehaldus • Alumiinium Must AOC AM420B, Klamber/läbiv polt, 9 kg, 43,2 cm (17"), 86,4 cm (34"), 100 x 100 mm, Must

Max. weight 8 kg | Fits screens sized 13-32" | Colour White