The Neomounts DS70PLUS-450BL1 NEXT Core is a full motion desk mount for curved ultra-wide screens up to 49". The mount features a strengthened head specifically designed for curved ultra-wide screens and to support a higher maximum weight up to 18 kg (curved 14 kg). The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (5,4-49,7 cm), to create the perfect working position. The DS70PLUS-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70PLUS-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
The AXAGON RSS-CD09 internal frame is designed to be mounted instead of the existing 9.5 mm CD/DVD drive. It is designed for 2.5" SSD/HDD SATA drives. You can easily replace the optical drive in your laptop with a hard drive. The SATA 6G interface allows you to enjoy the speed of modern SSD disks up to 6 Gb/s. Thanks to the absence of complex electronics, it does not slow down the data transfer speed and supports all modern functions such as TRIM. This reduction ensures wide compatibility with various notebook brands. The ODD frame can be set via double switch so it will work with most notebook brands like LENOVO, HP, DELL, ASUS, ACER, SONY, TOSHIBA and others. It is possible to use standard 2.5 SSD disks with a height of 7 mm as well as hard disks with a height of 9.5 mm. The ODD caddy with mounted disk behaves like a standard hard disk in the operating system and in the BIOS (UEFI). By inserting a disk into the adapter, you can easily add an internal 2.5" disk, which can be used to supplement an existing notebook disk.Booting support can significantly speed up older notebooks by adding a 2.5" SSD disk. The unique screwless disk mounting system is secured with a rubber spacer or rubber thread plugs. Rubber insert plugs also help minimize hard drive vibration. Metal springs help fix the adapter in the optical drive bay. The metal frame body is made of aluminum and ensures perfect mechanical protection of the inserted disk. The built-in HQ capacitor helps stabilize the SSD/HDD power supply. Elegant built-in LED indicates disk insertion and data transfer. The package also includes a plastic faceplate (front panel) imitating the front of the optical CD/DVD drive. There are several mounting holes on the back of the reducer to fix in the notebook body. Input: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), 13 pin (7+6) SLIM SATA data and power male connector for notebook connection. Output: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), supports 2.5" SSD/HDD, maximum disk capacity all without limitation, maximum disk height - 9.5 mm, standard 22 pin (7+15) SATA data and power female connector for 2.5" disks. Other features: Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The overall speed depends of inserted disk type and the SATA interface version of the notebook optical drive. It is a pure hardware reduction - for all operating systems, no drivers are installed. Disk boot support in external adapter. Full Plug and Play support. The adapter is powered by a 6-pin Slim SATA power connector. Built-in HQ capacitor for stabilized SSD/HDD power supply. The dimensions of the frame correspond to the slim 5.25" position in the laptop. Aluminum body for disk protection and disk cooling. Other features: Adapter dimensions 128 x 127 x 9.5 mm. Adapter weight 66 g (without faceplate). Notice:The height of the original optical drive must be determined before replacement. RSS-CD09 is designed for a 9.5 mm height. Package contains: ODD adapter for 2.5 SSD/HDD, 4 rubber plugs, plastic pry bar, screwdriver, front panel (faceplate), printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The Savio AK-65 2.5" external HDD/SSD enclosure, is the ideal solution for people who want to store and move their data in a convenient and secure way. Fast data transfer The enclosure is compatible with 2.5" HDD/SSD drives with a height of 7 or 9.5mm, so you can choose a drive with the capacity and specifications to suit your needs. High data transfer speeds ensure fast copying and transferring of files, which is extremely important in today's dynamic digital environment. Data safe in all conditions With a wide storage temperature range of -20C to 50C, the case can be kept safe in a variety of weather conditions. This ensures that your data remains secure. Compact and versatile Its compact dimensions are 120.5 × 75 × 13 mm and its light weight of 45 g make it convenient and easy to carry. Compatibility with Windows XP, Vista, Win7/8/10/11, macOS and Linux operating systems makes the Savio case extremely versatile. Technical specification: Interface: USB 3.0 SuperSpeed (up to 5 Gbps) Drive type: HDD / SSD 2.5 with a height of 7 or 9.5 mm Data transfer rate up to 5 Gbps Input voltage: 5 V Storage temperature: -20C 50C Dimensions: 120.5 × 75 × 13 mm Weight: 45 g Colour: black Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The DIGITUS DA-71156 storage enclosure offers a reliable solution for expanding storage capacity with support for M.2 SSDs. Utilizing a compact design with a length of 25 cm, this external enclosure is crafted from aluminum, ensuring durability and efficient heat dissipation. With a data transfer rate of up to 10 Gbps for NVMe drives and 6 Gbps for SATA drives, it efficiently handles large files while maintaining optimal performance. An LED indicator provides visual feedback on operational status, making it user-friendly.
2-Bays 2.5"/3.5" SSD/HDD Clone Station with card reader and USB-ACompatible with both 2.5"/3.5" HDDs and SSDs Supports standalone cloning without a computer Integrated card reader for CF and SD memory cards High-speed data transfer via USB connection Includes a power adapter for reliable operation.
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
HDMI 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz The Club 3D CSV-1384 is a HDMI™ 2-in-1 Bi-directional Switch for 8K60Hz or 4K120Hz. It can switch either of two sources to one display or switch one source to either of two displays. Press the switch button to select channel 1 or channel 2. With a piece of 0.5m / 1.64 ft length fixed HDMI™ cable (pigtail), this Switch not only reduces cost but also saves time for customers. This kind of HDMI™ Switcher routes high definition video (in multiple resolutions and up to 8K60Hz) and digital audio from the sources to display units.
The DIGITUS DA-73109 USB extension cable enhances connectivity and data transfer rates for devices. Featuring double shielded technology, this cable ensures reliable performance in demanding environments. With USB 3.0/ USB 3.1 compliance, it supports data rates of up to 5 Gbps, allowing for efficient and fast data transfer. The male 24-pin USB-C connector on one end and the female 24-pin USB-C connector on the other provide versatility in connecting various devices.
The Club 3D CAC-1572 Thunderbolt cable offers performance with compliance to multiple standards including USB4, Thunderbolt 3, Thunderbolt 4, and DisplayPort 2.1. This bidirectional cable features a 24 pin USB-C connector on both ends, ensuring compatibility across a range of devices. Utilize this technology to achieve a transfer rate of up to 80 Gbps, enabling rapid data transfer and seamless connectivity.Designed with high-quality materials, the cable jacket is constructed from thermoplastic elastomer (TPE), providing durability and flexibility. With support for resolutions such as 16K at 60Hz, 4K at 540Hz, and 8K at 240Hz, this cable is equipped to handle high-resolution content with ease. Additionally, it supports USB Power Delivery of 240W, making it a choice for powering devices while maintaining high-speed data transfer efficiency.
Maclean MC-967 universal desk mount is a practical solution for people working on two screens simultaneously. It allows you to increase your working space, improve ergonomics and increase productivity. The mount is designed for mounting 2 monitors of different brands with a weight of up to 9 kg and screen diagonal from 13 to 27". We can easily attach screens in VESA standard to the mount: 75x75, 100x100 mm. Compatible with LED, LCD monitors: Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, Iiyama, Acer. The MC-967 allows the user to adjust the tilt angle and height of each monitor, allowing for optimal positioning of the screens in relation to each other and an ergonomic setup for the user. Cable grommets help keep cables neatly organized. This reduces desk clutter, resulting in a neater look and a more organized workspace.
The Club 3D CAC-1559 video adapter cable offers connectivity options with performance. Compliant with DisplayPort 2.1 standards, this cable provides a connection between devices with its 24 pin USB-C and 20 pin DisplayPort connectors. The cable supports DisplayPort Alternate Mode, enabling video transmission for resolutions up to 10K at 60 Hz, suitable for both professional and personal use. It features error correction, kink protection, and a transfer rate of up to 80 Gbps to ensure a connection.With support for multiple display resolutions including 8K at 60 Hz and 4K at 240 Hz, this cable is designed to handle the demands of high-definition audio and video experiences. Certified by VESA DP80, it is compatible with a wide range of devices and meets FCC, RoHS, and EMI standards, assuring users of its quality and safety. The bidirectional functionality ensures versatile connectivity, making it an essential tool for anyone seeking high-performance video solutions.
Neomounts CL35-340BL22. Ekraani minimaalne suurus: 58,4 cm (23"), Ekraani maksimaalne suurus: 106,7 cm (42"), Paigaldussüsteemi ühilduvus (min): 100 x 100 mm, Paigaldussüsteemi ühilduvus (max): 200 x 200 mm. Kõrguse ...
25 m aktiivne optiline USB 3.2 Gen 1 kaabel, ühildub tagurpidi USB 2.0-gaToetab ülekandekiirusi kuni 5Gbps, ühildub tagurpidi USB 2.0 seadmetegaAramiidist kiudude tugevat kaablistruktuuriMadal RFI/EMI tundlikele keskkondadele2-aastane garantiiLindy USB 3.2 Gen 1 Type A to C hübriidkaabel võimaldab USB Type C seadet kasutada kuni 25 m kaugusel arvutist, säilitades samal ajal SuperSpeed ülekandekiirused kuni 5Gbps . Seda kasutatakse tavaliselt koosolekuruumides ja videokonverentsisüsteemidega või veebikaameratega, millel on oma toiteallikas, nt Logitech Rally Camera.See kaabel on mõeldud paigaldamiseks seintesse, kaablikanalitesse ja kaablikanalite kaudu. Aramiidkiud tagavad tugeva kaablistruktuuri ja tagavad võrratu tugevuse ja vastupidavuse. Kaabel on CPR-sertifitseeritud, mis tähendab, et kaabel vastab rangetele tuleohutusnõuetele. See kaabel on kavandatud madala raadiosagedushäirete (RFI) ja elektromagnetiliste häirete (EMI) tasemega, mistõttu sobib see kaabel tundlikesse keskkondadesse, kus signaali terviklikkus on esmatähtis.Pange tähele, et see kaabel töötab ainult isevarustatud seadmetega ja USB-hubidega, millel on väline toiteallikas.Translated with DeepL.com (free version)
The Maclean MC-137 mount for three monitors with a diagonal of 17 to 27 inches is a solution designed for people who value order, convenience, and full control over their workspace. It is the perfect choice for gamers, programmers, analysts, and content creators who use multiple screens simultaneously. The design allows for stable mounting of three monitors two on arms with gas springs and one mounted directly to the central pole. This solution combines complete freedom of adjustment with maximum stability and space savings.The two side arms are equipped with gas springs that allow for easy and smooth height adjustment of each monitor. Thanks to them, you can easily raise or lower the screens to suit your preferences. The gas mechanisms keep the monitors stable, eliminating vibrations and ensuring precise positioning. The central screen, mounted on the pole, can also be adjusted to the optimal height during installation, creating a consistent and ergonomic layout of three screens.
USB extension cable, 15 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Original part number CCP-USB2-AMBM-10 Gembird USB 2.0 A- B 3m cable black color Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 3 m Other information Other information Gold plated plugs No Cable colour Black Additional information Nickel plated
Original part number CCP-USB3-AMAF-6 Gembird USB 3.0 extension A-plug A-socket cable 6ft Class of product Cables - USB plugs 1x male USB A-type1x female USB A-type Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue More info Strona producenta [EN]
Original part number 2L-5202U Product name ATEN KVM Cable (HD15-SVGA, USB, USB) - 2m Producer Aten Class of product KVM cables Wire type multilead cable Plug 1 type D-SUB 15 maleUSB A-type Plug 2 type D-SUB 15 male Colour grey-black Length 2 m
Length 0.3 m Product Type Cables Length 0,3 m Shipping box quantity 400 Unit Brutto Volume 0,0000788 cubm Unit Net Weight 0,015 kg Unit Gross Weight 0,01975 kg
Original part number A-HDMI-VGA-02 Product name Gembird adaptor HDMI-A(M)->VGA(F) + Audio Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type HDMI male Plug 2 type VGA Female Other information Other information Colour Black Additional information VESA up to WUXGA, 1920 x 1080 at 60 Hz + 3.5 mm stereo jackInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Dimensions: 49 x 23 x 15 mm
