The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
The Gembird MA-DA2-05 is a versatile monitor mount or stand designed to support monitors up to 32 inches in diagonal size. Finished in a sleek grey color, it seamlessly integrates into any desk setup. Despite its lightweight design, weighing just 3850 grams, it can support a maximum weight of up to 18 kilograms, ensuring stability and security for your monitor. The product dimensions, with a gross depth of 460 mm and a height of 100 mm, make it a compact yet sturdy choice for optimizing desk space and improving your viewing angle.
Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1x naissoost USB 3.0 A-type 2-ühenduse tüüp: USB 3.1 Type-C (male) värv: must Lisaandmed: Enables connecting any standard USB 3.0 või 2.0 device to new type-C USB ports, liides
Tootja: Gembird Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1x USB 3.0, 1x male USB C-type kaabli pikkus: 0.5 m kullatud pistikud: Jah kaabli värvus: valge Lisaandmed: liides
Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Adapter USB-C to HDMI 4K 30Hz female 15 cm Adapter with USB type C plug to HDMI female connector For connecting an HDMI display to a USB Type-C video source (e.g. smartphone or laptop) Works on any device that supports DisplayPort Alternate Mode (Alt Mode) Supports 4K UHD resolutions at 30 Hz
Kiire HDMI kaabel koos EthernetigaHDMI pistik (tüüp A) > HDMI pistik (tüüp A)Goobay HDMI-kaabel suurejoonelise meelelahutuse jaoks. Kombineeri kõrglahutusega, viivituseta 4K-videoülekanne uimastava 7.1 ruumilise heli, Dolby Atmose või DTS:X-iga, et saavutada suurepärase pildi- ja helikvaliteediga kaasahaarav filmi- ja mängukogemus.Kaabel sobib kõrgresolutsioonilise pildi edastamiseks Ultra HD-ga kuni 4K @ 60 Hz (tagasiühilduv) ja kuni 18 Gbit/s andmesidekiirusega.Sobib ideaalselt heli ja video edastamiseks teleri/monitori ja projektorite, mängukonsoolide (nt PlayStation, Xbox) või voogedastusvastuvõtjate (nt Amazon Fire TV, Apple TV) vahel.Integreeritud Ethernet-kanal (HEC) ühendab mis tahes HDMI™-seadme juhtmega võrgus olevate seadmetega ilma eraldi internetikaablitetaCEC-funktsioon (Consumer Electronics Control) loob paindliku juhitavuse vaid ühe kaugjuhtimispuldi abil, nt mitme ühendatud HDMI™-seadme sisselülitamiseks ühe nupuvajutusega.Toetab 3D ja HDR (High Dynamic Range), mis tagab suurepärase ja kontrastse pildikvaliteedi ning HDCP 2.2 krüpteerimissüsteemi.Toetab täiustatud audiofunktsioone, nagu eARC (Enhanced Audio Return Channel) ja ARC (Audio Return Channel), mis võimaldavad lihtsat digitaalset edastamist telerist helibaarile või hi-fi-süsteemile.Kullatud kontaktid hoiavad ära korrosiooni ja tagavad täiendava vastupidavuse
The AXAGON PCEU-430RS PCI-Express card adds four external USB-A 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four USB ports are taken out to the bracket. You can connect four different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 4x external USB 5Gbps port with USB A-F connectors. USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
6 in 1 USB-C Hub: UH6120C turns a single USB-C port into 6 ports with a 4K@60Hz HDMI, 1 Gbps ethernet, 100W Power Delivery, 1× USB-C Data Ports, 2× USB-A Data Ports. Ultra High-Definition Media Display: Connect to an external monitor via the 4K@60Hz HDMI port for a stunning ultra high-definition experience. Stable Gigabit Connection: This compact gadget provides stable Gigabit Ethernet connectivity for your ultrabook, Chromebook, laptop, or desktop. Powerful 100W Fast Charging: Plug the charging cable into UH6120C and continuously deliver up to 100W of power to your PC while transferring files or streaming media. 5 Gbps SuperSpeed Data Transfer: UH6120C adds three USB 3.0 ports to your device, enabling simultaneous use of multiple USB devices. Easy to Use with Plug & Play: Simply plug in and start using in seconds, thanks to driver-free install with Mac OS X El Capitan Version 10.11.6 and later, Windows 11/10/8.1, Linux OS, iPad OS, iOS, Android, Chrome OS, and Nintendo OS.
for connection between USB-C™ and USB-A devices data transfer rates of up to 5 Gbps suitable for the MacBook with USB-C™ port very easy to operate Connection, type USB-C™ male Connection 2, type USB 3.0 female (Type A) max. transmission rate 5 Gbit/s
Vention ALGLI 8K 3m HDMI 2.1 CableEnsure fantastic image quality when playing games, watching movies, and more. The Vention HDMI cable supports 8K resolution and is known for its wide compatibility. With it, you can easily connect a computer to a monitor or a gaming console to a TV. It also boasts high-quality construction. Aluminum alloy components ensure rapid heat dissipation, while a cotton braid and PVC coating protect it from damage. The cable's gold-plated connectors are an additional asset, known for their durability and resistance to rust.Top-notch Image QualityThe cable supports 8K resolution and a 60 Hz refresh rate, making the displayed images exceptionally smooth and rich in detail. The product also supports Dynamic HDR, guaranteeing vibrant, natural colors. Furthermore, with a 48 Gbps bandwidth, QFT technology, and ALLM mode, you can comfortably play dynamic games without worrying about signal transmission issues. The VRR feature deserves attention as well, helping you avoid delays and screen tearing. The cable also allows for simultaneous video and audio transmission, with eARC technology ensuring clean, crisp audio. BrandVentionModelALGLIColorBlueInterfaceHDMI 2.1Max Resolution8K@60HzSupported TechnologiesDynamic HDR, eARC, VRR, QFT, ALLMMaterialAluminum Alloy + PVCCable Length3 m
Vention 5-in-1 USB 3.2 Gen 2 Hub Standard 10Gbps Transfer Speed Compatible with Multiple Systems Plug and Play Responsive Keyboard and Mouse Connection Supports Emergency Charging for Phones Widely Applicable and Hassle Free Easily Read 8TB External Hard Drives with Power Supply Supports 2TB External Hard Drives Without Power Supply Soft Blue Indicator Light for Real-Time Status Feedback 4-Port Expansion No More Repeated Plugging and Unplugging
Starlink Mini alalisvoolu (DC) toitekaabel (15 m) on loodud tagama Starlink Mini süsteemile usaldusväärset toiteedastust pikematel vahemaadel. 15-meetrine pikkus võimaldab paindlikku paigaldust ning vastupidav konstruktsioon tagab stabiilse jõudluse välistingimustes ja mobiilkasutuses. • 15 m kaabel paindlikuks paigaldamiseks • Mõeldud Starlink Mini toite jaoks • Stabiilne ja tõhus alalisvoolu (DC) toiteedastus • Vastupidav, sobib välistingimustesse • Lihtne pistikuga kasutusvalmis ühendus
The NZXT H7 Series GPU bracket kit is for enthusiasts looking to showcase their graphics card. It includes a vertical GPU bracket that allows for a display of your GPU, making it a focal point of your setup. The included PCI-e riser cable ensures a seamless installation, providing reliable connectivity and optimal airflow within your case. Crafted from durable steel, this bracket kit offers aesthetic appeal and strength, ensuring your GPU is secure and well-supported.
Tutvustame Motion 2.2, tipptasemel spordijälgija neile, kes suhtuvad tõsiselt oma tervisesse ja treeningrežiimi. Selles elegantses randmel kantavas seadmes on ühendatud stiil, funktsionaalsus ja tipptasemel tehnoloogia, et anda teile põhjalik ülevaade teie kehalisest aktiivsusest ja heaolust. Tänu täiustatud pulsikellale jälgib Motion 2.2 pidevalt teie südame löögisagedust ja annab treeningu ajal reaalajas andmeid, et tagada optimaalses treeningutsoonis püsimine. Integreeritud GPS- ja liikumisandurid registreerivad täpselt sammud, läbitud vahemaa ja põletatud kalorid, mistõttu sobib see ideaalselt nii jooksuhuvilistele kui ka innukatele kõndijatele. Lisaks on Motion 2.2-l mitme spordiala jälgimisfunktsioonid, nii et seda saab hõlpsasti kasutada mitmesuguste tegevuste, näiteks jalgrattasõidu, ujumise (tänu veekindlale disainile) või jooga puhul, kusjuures jälgimisfunktsioonid kohanduvad automaatselt vastavalt teie konkreetsetele treeningvajadustele. Lisaks sellele, et see nutikas seade on treeningkompanii, on see ka tervisekaaslane, mis jälgib unemustreid, et arendada paremaid uneharjumusi, ja pakub intuitiivse kaaslase rakenduse kaudu isikustatud terviseteadmisi. Sünkroonib hõlpsasti nutitelefonidega Bluetoothi kaudu, nii et kasutajad saavad kõnesid, sõnumeid ja sotsiaalmeedia uuendusi otse jälgimisseadmesse, et püsida ühenduses ka liikvel olles. Motion 2.2 kauakestev aku ja kohandatav kasutajaliides on mõeldud nii igapäevaeluks kui ka rangeteks treeninguteks, muutes selle parimaks vahendiks, mis aitab teil saavutada oma treeningueesmärke täpselt ja stiilselt. Olenemata sellest, kas olete tehnikahuviline sportlane või soovite parandada oma elustiili, Motion 2.2 annab teile enesekindla ja lihtsa kontrolli oma terviseteekonna üle.
The Neomounts cable management tray offers a practical solution for organizing cables and keeping workspace tidy. Designed to be desk mountable, it ensures easy installation without the use of tools, allowing for quick setup whenever needed. With a clamp-on design, this tray is universal, making it compatible with a variety of desk types and sizes. Crafted from durable steel, it can support a maximum load weight of 5 kg, ensuring that even heavier cable setups are securely managed.
FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes
Upgrade your CORSAIR power supply with Type 4 cables to CORSAIR Elite Premium Individually Sleeved Cables, made with flexible triple-layer mesh paracord sleeving for a professional look.
RJ45 moodulühendus, CAT 6A, 2x RJ45 emane (8P8C) kahe võrgukaabli ühendamiseks ehtsast metallist korpus / kate (metalliseeritud plasti asemel) metallist korpus, kesta ümbris PCB plaadiga 1:1 sobib PoE + jaoks vastavalt standardile IEEE 802.3at
The Sharkoon RJ45 Cat.7a SFTP patch cable is suitable for connecting computers to a hub or switch within an Ethernet network (Gigabit Ethernet compatible) or for connecting a DSL modem to a computer. With foil and copper braid shielding, it is specially protected against external sources of interference. The cable features SFTP (Screened Foiled Twisted Pair) shielding. Type Cable Color: blue EAN Made in China Application example For connecting computers to a hub or switch within a network Network Connection of 1x RJ-45 (plug) Cat.6a connector Taps 2 Category cable Cat.7 Shielding S/FTP Features External Further information LSOH (halogen-free) Cable length 2 meters
Expand the capabilities of your laptop or PCAre you looking for a solution to extend the possibilities of your laptop or computer? The RJ45/USB-C adapter from Qoltec is dedicated to anyone who appreciates practical solutions and is looking for a stable and fast internet connection. This compact adapter allows an Ethernet cable to be connected via an RJ45 connector to a USB-C port, eliminating the need for a built-in Ethernet port on the device. With this adapter, users can use wired internet on devices with a USB-C port, achieving high data transfer speeds and a stable connection.Fast and stable internet connectionDevices connected to the adapter can transfer data at speeds of up to 1000 Mb/s, ensuring fast file copying, smooth data transfer between devices and efficient use of external drives, which is particularly important when transferring large files, streaming high-definition video or playing online games.Robust and lightweight housingThe device's compact size makes it extremely practical and convenient, and its light weight will allow you to take it literally anywhere you need it, to work, the office or anywhere else on a business trip and beyond. It will easily fit into a pocket or backpack. The casing of the device is made of high-quality, durable aluminium, which further helps to dissipate heat and provides effective protection against crushing and protects against any damage.Forget drivers, enjoy full plug & play compatibilityIt's thanks to the plug-and-play function that, once connected to your laptop, our device is ready to use without the need to install any additional drivers, just plug in the USB-C cable and you're good to go. The USB-C connector allows you to connect to any computer, laptop, tablet or smartphone equipped with a USB-C port.
The Neomounts cable management tray provides a solution for organizing cables and keeping workspaces clutter-free. Designed for desk mounting, this cable tray features a clamp-on design that allows for easy installation without requiring specialized tools. Constructed from durable steel, it offers a reliable support system capable of holding up to 5 kg of cables and accessories.Whether for home offices or professional work environments, this cable management tray streamlines cord organization while promoting a tidy workspace. Its universal fit ensures compatibility with various desks, making it suitable for different setups and user preferences.
• 7,5 m • HDMI tüüp A (Standard) Sirge Meessoost • HDMI tüüp A (Standard) Sirge Meessoost • HDMI Etherneti kanal • Must Equip 119356, 7,5 m, HDMI tüüp A (Standard), HDMI tüüp A (Standard), Must
