Varia lisaseadmed

4smarts Lampka do monitora LED z kamerą FullHD LightBar Pro 456486

Brennenstuhl Steckdosenleiste ECO-Line 8x weiss 3m

Battery: 3000 mAh; Power: 180 W; 3 Gears; Working time up to 100 min

Elektriline õhupuhasti arvutitarvikute ja majapidamises kasutatavate esemete kontaktivabaks puhastamiseks Mobiilne Goobay õhupuhasti on ideaalne puhastusvahend koduses majapidamises. Varustatud 3 töötamisastmega ja 5 erineva pihustiga, sobib see paljude erinevate rakenduste jaoks - isegi raskesti ligipääsetavates kohtades. Tänu laetavatele patareidele on puhur pikaajaline ja keskkonnasõbralik alternatiiv purgi õhule. Arvutipuhastuskomplekt 5 vahetatava otsikuga puhastab tõhusalt ja võimsalt klaviatuuri, arvutikastid, radiaatorid, mänguasjad, diivanid ja elektroonikaseadmed. Pehme harjaotsik ei tekita kriimustusi ega kahjustusi nt kaamera, teleri või sülearvuti puhastades. Ideaalne multifunktsionaalne kaaslane vabal ajal ja puhkusel, nt õhumadratsite täispuhumiseks või auto sisemuse puhastamine tolmust ja liivast Tolmupuhuril on 3 võimsusastet kuni 35 000 pööret minutis 2000 mAh juures ja kuni 90 min. tööaeg. Integreeritud LED-ekraan näitab valitud töörežiimi ja aku olekut Õhupuhur pakub keskkonnasõbralikku, mittetoksilist ja pikemas perspektiivis odavamat alternatiivi purgi suruõhkudele. Klaviatuuripuhasti on varustatud kvaliteetsete 18650 Li-ion akudega, mis tagavad eriti pika kasutusaja (USB-A-lt USB-C™ laadimiskaabel on kaasas).

Security Key by Yubico (NFC) - USB-A, NFC enabled, Passwordless, Strong Two Factor, Strong Multi-Factor, ECC p256, Water Resistant, Crush Resistant, No Batteries Required, No Moving Parts, FIDO HID Device

B-1232CL-U3 ICY BOX Dual HDD / Hard Drive USB 3.0 docking station for SATA 2.5 inch and 3.5 inch hard disk cloning station and reader, adapter, external Manufacturer information: HUGE CAPACITY: Expand your capacity with a dual docking and cloning station for 2.5" and 3.5" SATA drives. With SINGLE mode, both hard drives are recognized as separate drives SYSTEM REQUIREMENTS: A free USB 3.0 Type-A port on the host computer is enough to freely expand the storage capacity. The dock supports Windows and macOS VERY FAST: The USB 3.0 host connection supports UASP and guarantees data transfer speeds of up to 5 Gbit/s. You can also transfer large amounts of data without long waiting times HARD DRIVE CLONING: You can clone bootable hard drives at the touch of a button, even without a computer. The docking station draws power from the included power adapter. Data backup can be that simple ALWAYS INFORMED: Hot-swappable hard drives are easy to replace and boot. A total of four LEDs inform you of the cloning status and progress

Tootja: Gembird Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: 1x naissoost USB 3.0 A-type 2-ühenduse tüüp: USB 3.1 Type-C (male) värv: must Lisaandmed: Enables connecting any standard USB 3.0 või 2.0 device to new type-C USB ports, liides

The DA-71106-1 hard drive enclosure, supporting 2.5" and 3.5" SATA drives with capacities up to 16 TB, allows reliable backups and efficient management of large amounts of data. With its USB 3.0 interface and fast transfer speeds up to 5 Gbit/s, files can be transferred quickly and smoothly. This sturdy and stylish enclosure supports both 2.5" and 3.5" SATA drives, accommodates drives up to 16 TB, and ensures seamless operation. Its robust aluminum construction provides long-lasting durability and effective heat dissipation. An LED indicator shows operational status and data transfers, while a convenient power switch allows easy handling. Compatible with Windows, macOS, and Linux, this enclosure offers versatile applications. The DA-71106-1 is ideal for both home and office use, perfect for data backup or portable storage solutions. Wide Compatibility: Supports 2.5" and 3.5" SATA hard drives (SATA I/II/III) Large Capacity: Up to 16 TB of storage for all your files and data Fast Data Transfer: USB 3.0 interface with transfer speeds up to 5 Gbit/s for quick file transfer LED Activity Indicator: Shows operational status and data transfers Multi-Platform Support: Compatible with Windows, macOS, and Linux Reliable Chipset: JMS578 chipset ensures stable and efficient performance Durable Aluminum Enclosure: Elegant design with excellent heat dissipation Convenient Features: Power switch for easy operation and tool-free installation

Tootja: Gembird Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1x USB 3.0, 1x male USB C-type kaabli pikkus: 0.5 m kullatud pistikud: Jah kaabli värvus: valge Lisaandmed: liides

Transcend kettaboks StoreJet 25S3 housing 2.5"

Enclosure for M.2 NVME HD-07 SSDs Enclosure designed for fast SSDs in the M.2 NVMe format. It is equipped with a very fast USB SB 3.2 Gen 2x1 interface, allowing for data transfer at a speed of up to 10 Gb/s, guaranteeing the use of the possibilities offered by SSD drives. It is equipped with a USB type C connector and the set includes a USB-C cable The housing allows easy installation of the drive. It is made of aluminum and thanks to its special shape it acts as a heat sink, dissipating excess heat from the disk. Thanks to this, it looks interesting and at the same time ensures the security of the SSD drive. Transfer speeds up to 10 Gb/s and support for fast SSD drives make iBOX HD-07 the best solution for storing large files. Versatility The housing allows the use of various sizes of SSDs in the following formats: 2280, 2260, 2242, 2230 Support for UASP and TRIM iBOX HD-07 supports the UASP function, which is responsible for queuing commands and executing them at the same time. The TRIM function is responsible for optimizing disk space and stabilizing disk performance and health. TRIM ensures that unused data blocks that have been removed are overwritten.

Orico TCM2-C3 M.2 NVME to USB-C 10Gb|s Disk Drive - Black

• Maksimaalne kaal (mahutavus): 18 kg • Ekraani minimaalne suurus: 43,2 cm (17") Ekraani maksimaalne suurus: 81,3 cm (32") • Toetatud ekraanide arv: 1 • Klamber/kaitsekrae Kinnituse tüüp: Laud • Paigaldussüsteemi ühilduvus (max): 100 x 100 mm • Gaasvedru Kõrguse reguleerimine Kalde reguleerimine • Juhtmehaldus • Tumehall Leitz 65380089, Klamber/kaitsekrae, 18 kg, 43,2 cm (17"), 81,3 cm (32"), 100 x 100 mm, Tumehall

Mocco USB-adapter C-tüüpi

10 black Velcro cable ties (20 x 100 mm) from InLine for easy bundling of cables inside and outside the PC.

One hub, infinite possibilities - Save time and spaceLooking for a solution to expand the capabilities of your laptop or computer? The Qoltec brand USB hub is dedicated to anyone who appreciates practical solutions to facilitate the organization of work and the use of multiple devices simultaneously. The lack of more USB ports on devices such as laptops, for example, is a big problem. Already our device will improve and organize your workstation, you will gain additional USB ports necessary to connect several devices at once.All your devices in one placeConnect multiple devices simultaneously and enjoy fast and reliable file transfers. Our hub will allow you to connect multiple devices simultaneously without sacrificing performance.Connect mouse, keyboard, printer, flash drive, headphones, speakers, monitor, projector and other accessories Without having to rewire cables. With Power Delivery (PD) 100W technology, you can simultaneously work and quickly charge your laptop or tablet.HDMI port supporting 4K @30Hz provides excellent images on external screens, ideal for presentations and multi-monitor work.An RJ45 Ethernet 100Mbps connector guarantees a stable network connection, even where Wi-Fi fails.USB 3.0 and USB 2.0 provide convenient connection of classic accessories and fast data transfer.Multifunctionality in a compact sizeThe compact size of the device makes it extremely practical and convenient, and its light weight will allow you to take it literally anywhere you need it, to work, the office or anywhere else on a business trip and beyond. Fits easily into a pocket or backpack. The housing of the device has been made of high-quality durable aluminum, which further helps dissipate heat and provides effective protection against crushing and protects against any damage.Fast and reliable file transfer speedsDevices connected to the hub can transfer data at speeds of up to 5 gigabits per second, providing fast file copying, smooth data transfer between devices and efficient use of external drives. Remember the quality of the connected device or the type of cable also has its limitations on data transfer speeds. Make sure that all devices connected to the hub are compatible with USB 3.0 and have the ability to support high data transfer speeds.Forget drivers, enjoy full plug-and-play compatibilityIt is thanks to Plug-and-Play functionality, Once connected to the laptop, our device is ready to use without installing additional drivers, Just plug in the appropriate USB-C or USB cable and you're good to go. USB-C connector allows you to connect to any computer, laptop, tablet or smartphone equipped with a USB-C port or Thunderbolt 3 and 4 port that supports data transfer.

Lenovo 76H3528, Must

Clone & DockingStation for SATA & M.2 HDDs/SSDs with USB 3.2 Gen 1 Type-C connection Simple cloning: Just one touch of a button initiates the cloning process. No software installations or PC setups are required. The device is able to clone directly to M.2 PCIe NVMe drives from various sources Versatile compatibility: Each of the three independent slots can be connected to the PC simultaneously. The tool-less design allows for quick docking of drives, which is beneficial when working with different data types High-speed performance: Thanks to USB 3.2 Gen 2 technology, data transfer rates of up to 10 Gbit/s are achieved. With the ICY BOX combination cable, no additional adapter is required Universal drive compatibility: The device supports M.2 SSDs, 2.5/3.5 HDDs and SSDs. It offers easy setup and reliable performance, is perfectly portable and easy to use Multi-OS compatibility: Provides consistent performance and compatibility with Windows and macOS environments and is a reliable solution for connecting a variety of M.2 and SATA drives

Lanberg kaabel Cable USB-CM->HDMIM, 4K, 60HZ, must, 3m

SuperSpeed USB-C 5Gbps docking / cloning station AXAGON ADSA-DC DUAL CLONE easily and quickly connects up to two 2.5" or 3.5" drives to the computer at the same time. The connection to the computer is enabled by the modern double-sided USB-C connector on the dock together with the supplied USB-C USB-A cable with a length of 80 cm. This handy helper will allow you easiest connection of any 2.5/3.5" SATA drive to computer or notebook. Just insert one or even two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux...). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5Gbit/s. Connection via USB-C female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, Supports 2.5" HDD/ SSD Supports 3.5" HDD. Max. disk capacity all without limitation. Max. 2.5" disk height - all without limitation. Features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2) and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transmission in Windows 8 and later. TRIM support to reduce the gradual degradation of SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. HDD/SSD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spin down - shutdown of disks when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C female connector. USB-C USB-A cable 80 cm long is included. LED indicating HDD/SSD dock power and disk activity in both shafts. Station dimensions 73 x 130 x 97 mm. Weight 307 g. Power: Power supply using the included external AC/DC adapter 12V - 3A with 150 cm long cable. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDDs and SSDs can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported OS: Windows, macOS, Linux, Chrome OS. Package contains: HDD/SSD dock, USB-C USB-A cable 80 cm long, power adapter 100-240V / 12V-2.5A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A

The Gembird MA-DA2-05 is a versatile monitor mount or stand designed to support monitors up to 32 inches in diagonal size. Finished in a sleek grey color, it seamlessly integrates into any desk setup. Despite its lightweight design, weighing just 3850 grams, it can support a maximum weight of up to 18 kilograms, ensuring stability and security for your monitor. The product dimensions, with a gross depth of 460 mm and a height of 100 mm, make it a compact yet sturdy choice for optimizing desk space and improving your viewing angle.

Tootja koduleht: gembird.com/item.aspx?id=9754 Brutokaal: 0.01 Netokaal: 0.009 värv: must Product Type: Adapter Pakendi maht: 1.2e-005 Lisakirjeldus: Product Type Adapter|Colour must

Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

CABLE USB3.1 5M/43308 LINDY

Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.

Brutokaal: 0.019 Netokaal: 0.009 Saadetise kogus pakendis: 1 värv: must Product Type: Adapter Pakendi maht: 4.8e-005 Lisakirjeldus: Product Type Adapter|Colour must

Cable length: 15

Desk mounting arm for a single monitor The arm rotates, extends and retracts, tilts to change the reading angle, and allows the display to switch from landscape to portrait mode and more. Enables easy ergonomic positioning to reduce strain Works with almost any LCD monitor (max. 32") Durable adjustable gas springs, suitable for monitors weighing up to 10 kg Sturdy desk clamp for easy and secure attachment to your desk Removable VESA plate for easy installation Built-in cable management for an organized and tidy workspace Compatible with VESA, max. 100 x 100 mm

ASUS TPM-SPI

i-tec C31CBLHDMI60HZ2M. Pistmik 1: USB-C, Pistmik 2: HDMI, Konnektori sugu: Meessoost/meessoost, Kaabli pikkus: 2 m. Toote värv: Must

storage drive enclosure 2.5" HDD/SSD Black

storage drive enclosure 2.5" HDD/SSD Black

Desk mounted adjustable monitor arm for 2 monitors Position your screen perfectly Lightweight and tilting design Monitor desk mount with single arm for 2 monitors Arm rotates, extends and retracts, tilts to change reading angles Monitor mount bar for side-by-side mounting of 2 monitors Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 32") Durable adjustable gas-springs suitable for monitors of 2 - 8 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)

Adapter Goobay Mini DisplayPort/HDMI 1.1

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.