FL50-525BL1 Neomounts by Newstar floor stand Neomounts by Newstar FL50-525BL1 mobile floor stand for 55-86" screens - Black The Neomounts by Newstar FL50-525BL1 Move Go is a mobile floor stand for flat screens up to 86" with a maximum weight capacity of 76 kg. Due to the sturdy design and the included touch screen stabilizers, the Move Go is a perfect solution for touch screens. The floor stand is manually adjustable in 4 preset height positions, ranging from 106 to 136 cm. The Neomounts Move Go is packed partially pre-assembled and installation can be done within just minutes. The trolley features practical handles and four solid 7,5 cm double locking caster wheels that allow you to move and use the floor stand wherever you like. Due to the large caster wheels, thresholds or carpets are no challenge to the FL50-525BL1. A multimedia shelf (front and back mountable) with a maximum weight capacity of 10 kg and an AV hardware rack is included and optional for installation. The screen on the trolley can be secured by locking the brackets using a padlock (not included).
Length 0.15 m|Connectors SATA power supply Product Type Cables Length 0,15 m Connectors SATA power supply Shipping box quantity 1 Unit Brutto Volume 0,00012 cubm Unit Net Weight 0,01 kg Unit Gross Weight 0,1 kg
Original part number DK-1511-V-1 Product name DIGITUS CAT 5e twisted pair installation cable 100m Producer DIGITUS Class of product Installation network cable Wire type UTP - unschielded twisted pair cable, 4 pairs Category 5e Inner conductor diameter no data Coating type PVC - polyvinyl chloride Length 100 m Colour Grey Gross weight 4.5 kg Packaging type BOX
Tootja: Gembird Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA ATA/SATA plugs: 2x male SATA 7-pin kaabli pikkus: 0.5 m kullatud pistikud: Ei kaabli värvus: punane Lisaandmed: Metal clips, SATA III 6 Gb/s, One ühenduspesa 90 degree bent
Tootja: Gembird Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 1x USB 3.0, 1x male USB C-type kaabli pikkus: 0.5 m kullatud pistikud: Jah kaabli värvus: must Lisaandmed: liides
The NewStar desk mount, model NM-D135BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 30”. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 40 centimetres. Depth adjustable from 4 to 43 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar NM-D135BLACK has three pivot points and is suitable for screens up to 30" (76 cm). The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. Screen size: 10 - 30" Desk mount: Desk clamp & grommet Depth: 4 - 43 cm Height: 0 - 40 cm Tilt: 90° Rotation: 360° Swivel: 180°
Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 tpe C (naissoost) 2-ühenduse tüüp: Display Port värv: must Lisaandmed: Expand your desktop to external Display Port monitor via new USB-C, või Thunderbolt 3 ühenduspesa, the kaabel adapter allows you to transfer video koos 4K Ultra HD resolutsioon, ja stereo sound, 1x USB-C 3.1 või Thunderbolt 3 ühenduspesa, transfer rate Kuni 10 Gbps (USB-C), ja 40Gbps (Thunderbolt 3) to connect the adapter to a notebook, tablet, või PC, Graphic liides Lisainfo: i-tec USB-C DisplayPort kaabel Adapter 4K/60 Hz 150cm
Product kirjeldus: Club 3D video interface converter - DVI / USB Cable: Video interface converter - DVI / USB ühenduspesa: USB-C - male ühenduspesa (Second End): DVI-I - naissoost Compliant Standards: USB 3.1 Features: 4K tugi
Product kirjeldus: DIGITUS USB extension kaabel - 15 m Type: USB extension kaabel tehnoloogia: Triple shielded Features: Active kaabel (signal regeneration), LED status indicator pikkus: 15 m ühenduspesa: 9 pin USB Type A - male ühenduspesa (Second End): 9 pin USB Type A - naissoost Compliant Standards: USB 3.0 värv: must
Product kirjeldus: kaabelxpert Premium USB kaabel - 2 m Type: USB kaabel Features: Sync ja charge, braided pikkus: 2 m ühenduspesa: Micro-USB Type B - male ühenduspesa (Second End): 4 pin USB Type A - male Rated Current: 2.1 A Compliant Standards: USB / USB 2.0 värv: must, valge
Ühendage kaasaskantav heliseade, iPhone, iPod või nutitelefon auto lisapesa, võimendi või kõlaritega. Kvaliteetne väga painduv kaabel Madala profiiliga 24K kullatud pistikud optimaalse juhtivuse tagamiseks PVC ja halogeenivaba disain 10 aastane garantii Cromo Line Lindy 3,5 mm isane helikaabel on kvaliteetne painduv kaabel, mis sobib ideaalselt kasutamiseks koos hi-fi- ja heliseadmetega. See pakub esmaklassilist kaablikonstruktsiooni taskukohase hinnaga ja sellel on 24K kullatud kontaktid, mis tagavad optimaalse juhtivuse ning vastupidavuse tuhmumisele ja korrosioonile. Lindy 3,5 mm helikaabel sobib ideaalselt kaasaskantava heliseadme, iPhone'i, iPodi või nutitelefoni ühendamiseks auto lisapesa, võimendi või kõlaritega. Iga kaabel on 100% toimivustestitud ja sellega kaasneb Lindy üllatusteta garantii. PVC- ja halogeenivaba disain: need kaablid on valmistatud termoplastilistest elastomeeridest (TPE) ja sisejuhtmete nailonist isolatsioonist. Need on täielikult PVC- ja halogeenivabad kooskõlas EL direktiividega, mille eesmärk on piirata PVC ja tüüpilistes kaablikonstruktsioonides sisalduvate toksiliste lisandite kasutamist.
4-port USB type-C hub (1 x USB 3.1 + 3 x USB 2.0) - Best of both worlds: - One fast USB 3.1 (Gen 1) port for fast data connection to e.g. external HDD - Three USB 2.0 ports for connecting standard peripherals (mouse, keyboard, printer, etc) - Windows 11 compatible
Multiport USB-C 5Gbps TRIPLE 4K DISPLAY hub AXAGON HMC-4KX3 expands your laptop with nine ports and memory card reader SD / microSD. You can easily and quickly connect up to three monitors, three USB devices, a Gigabit Ethernet network, headphones and card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a universal and powerful 11in1 docking station for modern laptops. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. Each of the three video outputs (2x HDMI + 1x DisplayPort) provides a high-quality image up to 4K/60Hz Ultra HD resolution. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Even when three monitors are connected at the same time, the docking station can provide a resolution of up to 4K/30Hz on each of them. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. Gigabit network card extends your computer by a fast network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The robust aluminum body ensures mechanical resistance and quality cooling of the docking station. The wedge shape of the hub encourages its use as a laptop pad for better cooling and ergonomic positioning. Also, the included USB-C cable is designed to use the hub as a laptop pad, the optimal length of 40 cm together with the curved connector allows it to be almost entirely hidden under the laptop and contribute to the impression of a clean desk. The USB-C cable is detachable and can be replaced with a longer cable if needed. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. 1x Power Delivery port (power only), USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video outputs: 2x HDMI port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution:1 connected monitor in any of the video ports: 4K resolution 4096 x 2160 at up to 60Hz. * 2K / WQHD resolution 2560 x 1440 at up to144Hz (Mac via DP up to 165Hz). * FHD resolution 1920 x 1080 at up to 240Hz (Mac max. 144Hz). *2 simultaneously connected monitors - up to 4K/60Hz on one monitor and 4K/30Hz on the other monitor. *3 simultaneously connected monitors - up to 4K/30Hz on all monitors. ** Valid for connection to a computer with DisplayPort version 1.4. Display mode support in Windows: Mirroring or expanding the surface of the primary monitor on each of up to three connected monitors. Each of the connected monitors can display either the mirrored or extended surface of the primary monitor as needed, e.g. one monitor will display the mirrored surface of the primary monitor and the other two monitors will display two different extended surfaces. Display mode support in MacOS: Mirroring the surface of the primary monitor on all up to three connected monitors. Expansion of the primary monitor area on one of the connected monitors + mirroring of the primary monitor area on up to two other connected monitors. Expanding the area of the primary monitor on one of the connected monitors + mirroring the extended area of the first monitor on up to two other connected monitors. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. A suitable OS is also required. The video output function will not be available without these requirements. HDR (High dynamic range, 10-bit support) support - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support for 2-channel audio sampling rate up to 48kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others.Two LEDs to indicate network activity and connection of the adapter to USB and network. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel aalog mono microphone input 48 kHz @ 16 bit for recording. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 256 x 90 x 23 mm. Weight 317 g (without cable). USB-C male / male cable length 40 cm. Supported operating systems: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer.
The multi-port USB-C 5Gbps AXAGON HMC-8HLSA hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, three USB devices, Gigabit Ethernet network, headphones with microphone and an SD card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two of them with 5Gbps speed and one with 480Mbps speed for mouse or keyboard connection. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The audio output is connected to a 3.5 mm jack and allows the connection of stereo headphones with a microphone. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, monitor TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz. 2K / WQHD resolution 2560 x 1440 at up to 120Hz. FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP, FTP, STP or SFTP patch cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. UHS-I support. Speed up to 104 MB/s. Support hardware ECC function and CRC function. 2 LUN - the reader is indicated as two disk drives. The possibility of copying from card to card. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. The blue LED indicates with constant light the hub connection to the computer. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 118 x 46 x 15 mm. Weight 88 g. USB-C male cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
HDMI M/M V2.1 CABLE 100M 8K BLACK OPTICAL AOC LANBERG HDMI optical cables allow for lossless transmission of audio-video signals over vast distances. Thanks to the use of optical fibre as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows the transmission of 8K quality video at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, the resolution can be increased up to a maximum of 10K! NOTE Due to its design, an optical HDMI cable only transmits video in one direction. Please pay attention to the markings on the connectors in order to connect the product correctly.
USB 2.0 A-plug to Micro B-plug 6ft cable, bulk package USB 2.0 cable for modern electronic devices with compact Micro USB 5 pin male connector Gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number PP12-2M/R Product name Gembird patchcord RJ45, cat.5e, UTP, 2m, red Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 2 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Boot non-snag-proof Colour Red
N300 Wireless Mini USB Adapter Provides fast 300Mbps Wi-Fi connections for wired devices Ideal for online gaming, HD streaming, web browsing, and more Supports Windows 10/8.1/8/7/XP (32/64bit)
Data Transfer Rate: 5 Gbps võrguseadeing Type1Data Link Protocol Supports: Gigabit Ethernet/Fast Ethernet/Ethernet LAN kiibistik153 võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u võrguseadeing Features: Hot Swap USB 3.1: 1(USB Type-C) LAN: 1(RJ-45) Requires operatsioonisüsteem: Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Android, Apple Mac OS X16 External värv: must kaasastarvikud16 mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.35 kg Retail Packaging Netokaal Carton1
