Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Extends an HDMI signal over a distance of up to 70 m in UHD resolution (4K/60 Hz) and offers KVM/USB functionality for the connection of mouse, keyboard and touchscreen.
CABLE HDMI M/M V2.1 30M 8K BLACK OPTICAL AOC LANBERG Optical HDMI cables allow for lossless transmission of audio and video signals over huge distances. Thanks to the use of optical fiber as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows you to transmit images in 8K quality at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, you can increase the resolution up to a maximum of 10K! ATTENTION Due to its construction, an optical HDMI cable only transmits the image in one direction. Pay attention to the markings on the plugs in order to connect the product correctly.
The HDMI extender kit extends the range of Full HD audio/video signals to a distance of up to 70 m, and the range of 4K / 30 Hz signals can be extended to a distance of up to 40 m with a CAT6 (or higher specification) network cable. The transmitter module is equipped with an HDMI output for connecting a local monitor. Thanks to PoC (Power over Cable) technology, only the transmitter needs to be connected to the power supply. Infrared (IR) signal transmission allows you to conveniently control the signal source using the remote control from the receiver (on the output screen). The scope of functionality also includes the function of copying the EDID of the output screen in the receiver or on HDMI-Loop Out, which can be selected using a switch. Extends the range of the HDMI audio-video signal to a distance of up to 70 m Supports resolutions up to 4K/30Hz, 4:4:4 HDMI 1.4, HDCP 1.4, DVI 1.0 Support for CAT 5e, CAT 6, CAT 6A, CAT 7, CAT 8 network cables Audio support: Up to 7.1ch HD audio PoC (Power over Cable) - only the transmitter requires an external power supply Loop-Out/HDMI output - connect a local monitor to the source device EDID copy function of the output screen in the receiver or on HDMI-Loop Out Infrared signal transmission (two-way) An infrared (IR) signal interface allows remote control of the input source via the output screen Suitable for wall mounting Metal housing
The HDMI extender kit is a high-performance video signal extender system consisting of transmitter and receiver modules. Extends the range of the Full HD audio-video signal up to 120 m using a CAT6 network cable (point-to-point connection). Additionally, you can use network switches and single receiver modules (DS-55518) to transmit video content over your existing network infrastructure (IP connection) to up to 253 displays and extend the coverage to an unlimited distance. Additionally, the integrated bidirectional infrared (IR) signal interface allows remote control of the input signal source via the output screen (on the receiver side). The solution allows you to extend the audio-video signal in Full HD via a CAT 6 cable over an unlimited distance via your existing network infrastructure or using commercially available network switches Extends the range of the Full HD audio-video signal via a CAT 6 cable to a distance of up to 120 m (point-to-point connection) Resolution support up to max. 1080p/60 Hz, Full HD Support for CAT 6, CAT 6A, CAT 7, CAT 8 network cables The infrared (IR) signal interface allows remote control of the input signal source via the output screen You can use additional receiver modules (DS-55518) and your existing network infrastructure to display video content on up to 253 screens (IP connection) Housing: metal Suitable for wall mounting
The Neomounts DS60-425BL2 NEXT Lite is a full motion desk mount for two screens up to 27" with a maximum weight capacity of 8 kg per screen. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal viewing angle for your screens. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screens to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS60-425BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS60-425BL2 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.
DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
Desk mounted adjustable monitor arm for 3 monitors Position your screen perfectly Lightweight and tilting design Monitor desk mount with single arm for 3 monitors Arm rotates, extends and retracts, tilts to change reading angles Monitor mount bar for side-by-side mounting of 3 monitors Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27") Durable adjustable gas-springs suitable for monitors of 1 - 6 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The Neomounts by Newstar FPMA-D550DD3BLACK is a full motion desk stand for three flat screens up to 27" with a maximum weight capacity of 7 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Additionally, the mount features height adjustment (0-43,2 cm), to create the perfect work situation. The smart cable management clips ensure orderly routing of the cables. Additionally, the mount features an Easy-release VESA, that allows you to (de)attach the monitors in a wink of an eye. The FPMA-D550DD3BLACK is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Deviant hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates.
The DIGITUS DA-73108 USB extension cable is designed to meet the data transfer demands of modern technology. With a double shielded construction, this cable ensures a stable and reliable connection, minimizing interference and maximizing speed.Featuring USB 3.0 and USB 3.1 compliance, it supports data transfer rates of up to 5 Gbps, allowing for efficient transfer of files. The cable is equipped with a male USB-C connector on one end and a female USB-C connector on the other, making it compatible with a wide range of devices, from laptops to smartphones.
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
6 in 1 USB-C Hub: UH6120C turns a single USB-C port into 6 ports with a 4K@60Hz HDMI, 1 Gbps ethernet, 100W Power Delivery, 1× USB-C Data Ports, 2× USB-A Data Ports. Ultra High-Definition Media Display: Connect to an external monitor via the 4K@60Hz HDMI port for a stunning ultra high-definition experience. Stable Gigabit Connection: This compact gadget provides stable Gigabit Ethernet connectivity for your ultrabook, Chromebook, laptop, or desktop. Powerful 100W Fast Charging: Plug the charging cable into UH6120C and continuously deliver up to 100W of power to your PC while transferring files or streaming media. 5 Gbps SuperSpeed Data Transfer: UH6120C adds three USB 3.0 ports to your device, enabling simultaneous use of multiple USB devices. Easy to Use with Plug & Play: Simply plug in and start using in seconds, thanks to driver-free install with Mac OS X El Capitan Version 10.11.6 and later, Windows 11/10/8.1, Linux OS, iPad OS, iOS, Android, Chrome OS, and Nintendo OS.
The DIGITUS USB extension cable DA-73111 offers reliable connectivity for your devices. With compliance to USB 3.0 and USB 3.1 standards, this cable ensures fast data transfer speeds of up to 5 Gbps. Its double shielded design helps protect against interference, ensuring a stable connection.Equipped with a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable is versatile and compatible with a wide range of devices. Whether extending the reach of your peripherals or setting up your workstation, the DIGITUS USB extension cable provides dependable performance and connectivity.
PE25 2.5Gbps PCI Express network card Speed up to 2.5Gbps Wake-On-LAN and RealWow support Low profile and full height brackets Windows 10/8.1/8/7, Windows Servers 2003/2008/2012, and Linux
Compact aluminum external AXAGON EE25-XA6C ALINE box with USB-C 5Gbps interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. Lightweight yet durable aluminum body provides excellent mechanical protection for the drive and ensures efficient heat dissipation. The elegant brushed surface casing offers a sleek look while preventing unwanted fingerprints. Input: USB 5Gbps (USB 3.2 Gen 1), connector USB-C female. Compatible with USB 480Mbps, USB 10Gbps. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable 50 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Other data: Box dimensions 13 x 129 x 79 mm. Weight 82 g (without cable and disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support.Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 5Gbps external box for 2.5" SATA disk, USB-C - USB-A cable 50 cm long, self-adhesive foam pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
The Club 3D DisplayPort cable provides a visual experience with support for resolutions up to 8K at 120 Hz. Its shielding technology ensures connectivity and performance, emphasizing compliance with display standards like DisplayPort 2.1, making it suitable for gaming and professional applications. Built with stress-relief features, the cable maintains durability over its lifespan of 10,000 insertions, allowing for a reliable connection in any setup. Additionally, with HDR support and bidirectional functionality, this cable adapts to various display needs.Designed with quality materials, including aluminum braid shielding and thermoplastic elastomer jacket, the cable offers effective EMI protection while being halogen-free. The VESA DP54 certification ensures the cable meets rigorous standards, providing peace of mind for users. Its ability to support Multi-Stream Transport (MST) and a 54 Gbps data rate enhances performance, making it an essential accessory for modern display solutions.
Adjustable Monitor Stand with Drawer Position your screen perfectly to reduce neck and eye strain Practical drawer for storing pens, memory cards, notes, and more Product Features: Adjustable-height steel stand for monitor or laptop Convenient drawer to store essential office items Compact, rectangular design, fits perfectly on any desk 3 height settings for optimal viewing angle
1xNumber of displays supported | Maximum weight capacity (per display) 40 kg | Maximum weight capacity 40 kg | Minimum screen size 37 " | Maximum screen size 75 " | Minimum VESA mount 75 x 75 mm | Maximum VESA mount 600 x 400 mm | Mounting type Desk | Height adjustment Yes | Swivelling Yes | Housing material Steel/Plastic/Tempered glass | Colour Black
Strong steel wall mount for LCD screens Supports most 37" - 75" LCD TVs VESA compatible, max. 400mm x 400mm Automatic spring locks with quick-release cables allow for quick and easy TV mounting and removal Convenient integrated bubble level ensures perfect alignment Distance from wall: 24mm Includes all necessary installation materials
FEATURES High-Definition Multimedia Interface (HDMI) digital audio/video interface cable Supports data transfer bandwidth of up to 10 Gigabits/sec Allows bi-directional communication between smart HDMI devices Supports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 Hz Supports HDMI Ethernet Channel 100 Mbps function (HEC) Supports Audio Return Channel technology (HARC) One HDMI connector is bent 90 degrees Gold plated pins and connectors
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.
Original part number TA-350-10 Product name Gembird RJ45/RJ45 in-line coupler 8P8C (10 pieces) Producer Gembird Class of product Network plug | coupler | boots Type of plug, coupler RJ45/RJ45 coupler Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information bag of 10pcs Colour ivory
USB extension cable, 6 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Original part number CCP-USB2-AMBM-15 Gembird USB 2.0 A- B 4.5m cable black color Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 4.5 m Other information Other information Gold plated plugs No Cable colour Black Additional information Nickel plated
Original part number CCP-USB3-AMAF-6 Gembird USB 3.0 extension A-plug A-socket cable 6ft Class of product Cables - USB plugs 1x male USB A-type1x female USB A-type Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue More info Strona producenta [EN]
Original part number PP12-50M Product name Gembird patchcord RJ45, cat.5e, UTP, 50m, gray Producer Gembird Class of product Patchcord network cable Wiring type UTP - unschielded twisted pair cable, 4 pairs Length 50 m Category 5e Coating type PVC - polyvinyl chloride Plug 1 type RJ45 Plug 2 type RJ45 Boot non-snag-proof Colour Grey
