BakkerElkhuizen BE Universal Crossbar. Maksimaalne kaal (mahutavus): 8 kg, Ekraani minimaalne suurus: 43,2 cm (17"), Ekraani maksimaalne suurus: 88,9 cm (35"), Paigaldussüsteemi ühilduvus (min): 75 x 75 mm, ...
• Max. Load Capacity: 25Kgs • Increased storage room beneath the desktop • Non-skid Silicone Pads • Raise your monitor to viewing comfort • USB Hubs with USB-A (5Gbps) x 1 + USB 2.0 x 2 • USB Charging port x 2 (USB-A + USB-C) • Input: 5V=3A, 9V=2A, 12V=1.5A • Output: 5V=3A, 9V=2A, 12V=1.5A (Max. 18W) • With integrated smartphone holder • With storage box • Length has three segment mode adjustment
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.1 compatible • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 8K/60Hz • Bandwidth up to 48Gbps • Supports HDR10, HLG, HDCP 2.3, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Supports video resolutions up to 8K/60Hz, 4K/120Hz • Up to 1536 kHz audio sampling rate • Dynamic HDR (HDR Dynamic Metadata) • Enhanced Audio Return Channel (eARC) • Variable Refresh Rate (VRR) • Quick Media Switching (QMS) • Quick Frame Transport (QFT) • Auto Low Latency Mode (ALLM) • Display Stream Compression (DSC) • Zinc Alloy housing • Gold Plated connectors for high transmission quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using
Green Cell Power Stream USB Type C - Ligthning 1m cable - Directly charge and sync your iPhone with the latest MacBook / iPad USB-C and up to 2.5x faster PD charging is just a fraction of what becomes possible Power Delivery 18W fast charging support allows you to charge your iPhone SE (2020) / 11 / 11 Pro / XS / X smartphones up to 50% in just 30 minutes! The cable also supports standard charging for devices including iPhone 7 / 6S / 6, iPad Air / mini and iPod GC Power Stream is officially certified by Apple MFi and has a C94 chip, ensuring perfect operation with all compatible Apple devices. Forget the hassle of non-certified accessories The GC Power Stream's unrivalled durability is the result of: extremely abrasion-resistant braided sleeving, metal shielding that effectively protects both plugs from breaking, and multi-stage cable protection using Kevlar fibres.
• USB-C Male (Compatible with TB3/TB4) • Supports HDMI resolution up to 4K/60Hz • USB 3.2 Gen1 Super Speed (10Gb/s) port x 4 • Power Delivery: 100W Max. • Aluminum casing for heat dissipation • Simple Plug-and-Play installation • Cable length: 25cm
Kõikehõlmav kaitse Ubiquiti UACC-ETH-SP-Panel-24 on töökindel 24-portiline Etherneti ülepingekaitse mis on mõeldud siseruumides rack-paigaldamiseks. Toetades andmeedastuskiirusi kuni 10 Gbps ja PoE++ tagab see usaldusväärse kaitse teie kriitilise võrguinfrastruktuuri jaoks. Iga port pakub 20 kA voolutugevust ja reageerib kiiresti ülepingetele (100 V/s kuni 1 kV/µs) kaitstes seadmeid ESD- ja EMP-sündmuste eest. 1U rack-mount vorming sobib ideaalselt standardse võrgurackiga mistõttu on see ideaalne ettevõtte võrkudele andmekeskustele ja tööstuslikele keskkondadele. Valmistatud vastupidavast SGCC terasest talub paneel karme töötingimusi vahemikus -40° kuni +80°C. Minimaalse signaali kaduga (mahtuvus ainult 1 0 pF sagedusel 1 MHz) säilitab see kiire ühenduvuse tagades samal ajal täieliku PoE toetuse. Olgu tegemist lülitite ruuterite või juurdepääsupunktide kaitsmisega pakub see paneel professionaalset kaitset kompaktse ja tõhusa disainiga. Kõrge jõudlus ja lihtne integreerimine 24 integreeritud ülepingekaitse portiga pakub UACC-ETH-SP-Panel-24 täielikku kahesuunalist kaitset Etherneti liinidele. 48 RJ45-pistikupesa võimaldab lihtsat inline-paigaldust häirimata olemasolevaid võrgukonfiguratsioone. DC-ülepingega 90 V kiirusel 100 V/s ja maksimaalse impulsspingega 600 V kiirusel 1 kV/µs neelab see tõhusalt üleminekvoolu ja hoiab ära kahjustused. Paneeli tugev isolatsioon (1G oomi 50 V juures) ja kompaktne 1U kõrgus tagavad ideaalse sobivuse isegi suure tihedusega serverikeskkonnas. Lihtsuse ja jõudluse nimel loodud seade aitab tagada kõigi ühendatud seadmete katkematu kiire töö. See on hädavajalik lahendus võrguadministraatoritele kes soovivad kaitsta kriitilise tähtsusega infrastruktuuri kahjulike pingetõusude eest.
Fanttik F2 Master Multifunction GrinderThe Fanttik F2 Master is a compact and powerful multifunction tool featuring a brushless motor that generates up to 30% less noise than standard drive units. The maximum speed is 25,000 rpm, which provides high performance while limiting heat build-up. A five-stage speed control allows you to adjust the working parameters for different tasks requiring precision, such as grinding, polishing, drilling or engraving.Revostor Hub - integrated accessory storage systemThe device features a 360° rotating magnetic stand with a set of 35 neatly organized accessories. This ensures that all bits and attachments are always within easy reach, significantly reducing prep time and making DIY (Do It Yourself, do it yourself) projects easier.Lightweight and portable designAt about 100 grams, the F2 Master is extremely handy and easy to carry. The aluminum housing is corrosion-resistant, and the tool's one-button ejection mechanism allows quick access to the tool. Such a design makes the tool useful both in the home workshop and in the field.Ergonomic and functional solutionsThe grinder has a pressure-sensitive on/off switch, which allows smooth real-time speed adjustment. The housing is waterproof and dustproof for easy cleaning and increased durability in a variety of working conditions. A built-in LED (Light Emitting Diode, light emitting diode) indicator lets you know the current speed setting, allowing you to maintain full control over the machining process.Fast charging and additional lightingThe device uses a USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port, and it takes only 40 minutes to fully charge the battery. The indicator on the back turns red when the charge level drops below 30%. An additional LED on the front improves visibility of the work area, which is especially useful for precision work in lower light conditions.Includedgrinderaluminum alloy casemagnetic box for bitsx35 tipsUSB-A to USB-C cableuser manual ManufacturerFanttikModelF2 MasterSpeed12000/15000/18000/20000/25000 RPM+ 10%Bit diameter range3/32"Battery4V Max, 700 mA/2.8 WhCharging portUSB-CCharging voltage5V/1A
Fanttik S1 Pro electric screwdriver setThe Fanttik S1 Pro is a cordless electric screwdriver designed for everyday assembly and repair work around the house. With a powerful motor, torque adjustment and a capacious battery, the tool will work well for both simple tasks and demanding projects.High productivityThe device offers three torque levels: 1.5 Nm, 3 Nm and 4.2 Nm, with a maximum torque of 6 Nm and a manual torque of 8 Nm. An instant stop function when the button is released allows precise control of the work. These parameters make the S1 Pro suitable for assembling furniture, air conditioning installations, bathroom faucets, sockets or desktop computers.Set of 16 bitsThe set includes 16 bits in 5 categories, made of hardened S2 steel (S2-type alloy steel) with a protective coating for durability and wear resistance. The set allows you to perform a variety of tasks with a single tool.Magnetic aluminum caseThe sturdy aluminum case with built-in magnetic holder makes it easy to store the screwdriver and bits. The pull-out mechanism provides quick access, and the magnetization of the handle and bits makes it easy to securely hold them.Capacious battery and convenient chargingThe 2,000 mAh battery allows you to drive up to 340 screws (3.5 × 20 mm) on a single charge. The USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port located on the outside of the case allows charging without removing the tool from the case, and the charge level indicator will allow you to renew its energy in time.Refined detailsThe built-in ring-shaped LED (Light Emitting Diode) illumination eliminates shadows and makes it easier to work in low light. The speed of up to 220 RPM and the use of a planetary gearbox increase efficiency, reduce noise and wear on the mechanism.Includedelectric precision screwdriveraluminum alloy casemagnetic case with 16 bitsinstruction manualUSB-A to USB-C cable (50 cm) ManufacturerFanttikModelS1 ProTorque3 levels 1.5 / 3 / 4.2N.mPurposePC repair, furniture assemblyMagnetic bits S216 piecesRotational speed220 rpmBattery capacity2000 mAhLED lightingYesWeight860 gDimensions of screwdriver184 x 35 mmMaximum torque - level I1.5 NmMaximum torque - level II3 NmMaximum torque - level III4.2 NmMaximum torque in manual mode8 NmCharging voltage5 V / 1 ARechargeable battery2000 mAh / 7.4 WhSpeed (no load)220 rpm
Raspberry Pi SC1166 M.2 HAT+ for Raspberry Pi 5 - Raspberry Pi M.2 HAT+ for Pi 5 allows users to connect M.2-format PCIe and NVMe devices to the PCIe FPC connector on Raspberry Pi 5. This HAT+ is an adapter board that supports 2230 and 2242 formats M.2 Non-Volatile Memory Express (NVMe) drives in both PCI Express Gen-2 and higher-performance Gen-3. The M.2 HAT+ for Pi 5 conforms to the HAT+ specifications and is automatically detected by the newer Raspberry Pi software/firmware. This adaptor board is supplied with a 16mm stacking header and spacers/screws to be fitted to a Raspberry Pi 5 with the Active Cooler in place. The 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories. The M.2 HAT+ board comes in 65.1mm x 56.7mm x 5.6mm dimensions and 13g weight. 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories Conforms to the HAT+ specification Automatically detected by the new Raspberry Pi software/firmware Supplied with a 16mm stacking header and spacers/screws to enable the M.2 HAT+ to be fitted to a Raspberry Pi 5 with the Active Cooler in place 65.1mm x 56.7mm x 5.6mm (max) (L x W x H) dimensions 13 grams weight
【Cutting Edge 16K DisplayPort Cable】UGREEN16K DisplayPort cable 2.1 supports high resolutions 16K@60Hz, 8K@240Hz, 4K@240Hz. And backward compatible with Display Port 1.4 1.3, 1.2. Single-screen video output of 16K@60Hz (DSC 1.2a), and dual-screen supported. The DP to DP cable also supports HDR, HDCP 2.2, FEC forward error correction and UHBR10 which guarantee your immersive viewing experience. (Note: 20-pin is disabled with no power. No need to worry about the 20-pin issues.) 【VESA Certified 80Gbps DP Cable 2.1】This Display Port 2.1/2.0 cable features an unprecedented bandwidth of 80Gbps, nearly 3 times what was available in the previous DP 1.4 spec. Stable and high-speed transmission without signal loss. The DisplayPort cable also backward compatible with previous DP 1.4 and DP 1.2 standards. The monitor cable meets the VESA Standard and supports 3D&HDR and Dolby&eARC to provide you with amazing sound and image quality. 【Optimized for Game Enthusiasts】The DP cable 2.1 is highly recommended for game setups as it works well with game monitors and graphics cards, delivering high-quality video and audio signals with no lag or interference. It supports FreeSync and G-Sync, which are essential for gaming. You can easily connect multiple monitors with Multi-Stream Transport (MST). Variable refresh rate (VRR) and auto low latency mode (ALLM) bring you smoother game experience especially in FPS, 3A and MOBA games. 【Ultra Durability】UGREEN DisplayPort cable port with no buckle design can prevent accidental damage. DP cable 2.1 is made of 28AWG tinned copper and tinplate which features triple shielding and resistance with EMI. Aluminum alloy housing is resistant to rust and can accelerate heat dissipation. The Display Port cord has a strong nylon braided jacket, which is 10X more durable than PVC. It can provide higher connectivity and longer service life for better signal transmission. 【Wide Compatibility】UGREEN 16K@60Hz DisplayPort to DisplayPort cable is compatible with all devices with DP ports, compatible with Nvidia RTX 3070/RTX 3080/RTX 3090/RTX 4090/RTX 4080ti/RTX 4070ti graphics cards, and AMD Radeon RX 6800 XT/RX 6900 XT/RX 7900 XT graphics cards, and Odyssey G8/G9, Ben Q, Alienware, LG Ultragear monitors, HDTV, Fire TV, computer and others. Support DP, DP++ modes, backward compatible 2.0/1.4/1.3/1.2 DisplayPort 2.1 Reinforced Joint Bare Copper Nylon Braided
Sobib kahe 17–32" ekraani jaoks • Ekraani maksimaalne kaal kuni 9 kg • Laiad reguleerimisvõimalused: kallutus, pööramine, tõstekõrgus • VESA-ühilduv kinnitus • Lihtne paigaldada ilma erivahenditeta
• More motion with less effort for best-in-class ergonomic positioning • Lift, tilt and turn your monitors for perfect views that hone your focus • Flexible design and accessory add-ons for every configuration • Raises screens off the desktop from a compact base • Improved cable management and streamlined look enhance your work area • Fewer parts and intuitive adjustment make setup effortless
Attach your monitor directly to your desk with the LogiLink gaming monitor mount. This allows you to use your screen with full freedom of movement and tilt, swivel or rotate it as you wish. The BP0162 also includes a built-in lighting effect that integrates seamlessly into any gaming station. The mount provides you with a great viewing experience while playing games and creates more space on the desk for other gaming accessories.
• Portable floor stand Maximum weight capacity: 100 kg Grey • Maximum screen size: 2.18 m (86") • Mounting type: Floor • Minimum VESA mount: 200 x 100 mm Maximum VESA mount: 800 x 600 mm • Wheels Cable management
WALL MOUNT FOR LARGE TVS 3790 INCHES MACLEAN MC-881 N The Maclean MC-881 N is a sturdy wall mount designed for mounting large TV screens ranging from 37 to 90 inches. Its an excellent choice for living rooms, bedrooms, offices, conference rooms, and commercial spaces where a stable mount, an attractive appearance, and convenient screen adjustment are essential. The Maclean MC-881 N mount allows you to securely mount both popular mid-sized TVs and truly large models, including 65-, 75-, 85-, and even 90-inch screens. STURDY MOUNT FOR LARGE TVS The Maclean MC-881 N is made of solid steel, ensuring high durability and reliable support for the TV. The mounts maximum weight capacity is 65 kg, making the Maclean MC-881 N suitable for many large and heavier LED, LCD, OLED, and QLED TVs. This is particularly important when mounting a large TV on the wall, where stability and safety are absolutely crucial. The steel construction enhances safety and allows you to enjoy your large screen without worrying about the mounts stability.
• Adjustable height and angle for optimal ergonomic positioning • 360° rotating base for flexible viewing and working positions • Anti-slip pads protect your device and prevent sliding • Aluminum construction for durability and efficient heat dissipation • Wide compatibility for tablets and smartphones
Satechi OntheGo™ 5-in-1 Multiport Adapter on kompaktne ja mitmekülgne USB-C-jaotur, mis muudab ühe USB-C-pordi viieks praktiliseks ühenduseks. Magnetkinnitus, integreeritud punutud kaabel ja elegantne disain teevad sellest mugava kaaslase sülearvutile, tahvelarvutile ja nutitelefonile. • Laiendab ühe USB-C-pordi viieks ühenduseks • HDMI toetab kuni 4K eraldusvõimet sagedusel 60 Hz • USB-C läbilaadimine kuni 60 W võimsusega • USB-A ja USB-C andmeedastus kuni 5 Gbit/s • UHS-I SD-kaardilugeja kiirusega kuni 104 MB/s • Magnetkinnitus sobib MagSafe'iga ühilduvatele seadmetele ja MacBooki kaanele • Kompaktne disain ja integreeritud punutud USB-C-kaabel
Satechi USB-C Snap Hub on elegantne ja kompaktne USB-C jagaja, mis on loodud spetsiaalselt MacBook Neo sülearvutitele. Täpselt sobituv alumiiniumkorpus laiendab kaks USB-C-porti kuueks ühenduseks, et saaksid mugavalt kasutada monitori, salvestusseadmeid ja muid tarvikuid. • Loodud spetsiaalselt MacBook Neo jaoks täpselt sobituva kahe USB-C-pistikuga • Laiendab kaks USB-C-porti kuueks praktiliseks ühenduseks • HDMI toetab kuni 4K eraldusvõimet sagedusel 60 Hz • USB-C läbivlaadimine kuni 45 W võimsusega • USB-A ja USB-C andmeedastus kuni 5 Gbit/s • UHS-I SD- ja microSD-kaardilugejad kiirusega kuni 104 MB/s • Värvitoonilt sobiv alumiiniumkorpus täiendab MacBooki disaini
HDMI ™ with standard Ethernet is the latest HDMI supports standard, and the following HDMI Features: - HDCP Compliant - Internet via HDMI (HEC) - Audio return channel (ARC) - 3D playback with a resolution of Up to 1080p
Gembird HDMI to Micro-HDMI adapter Features HDMI (A female) to micro-HDMI (D male) adapter; Gold plated contacts. Type HDMI to Micro-HDMI adapter Dimensions 35 x 20 x 11 mm Weight 7 g
Original part number CCP-USB3-AMBM-10 Gembird USB 3.0 A- B 3m cable Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 3 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Standard USB 3.0
