Maximise desk space and elevate your monitor to a comfortable viewing height to reduce eye, neck and shoulder strain. Holds large screens weighing up to 22.6kg. 3 different settings to achieve your perfect viewing height. Modern wide screen design, available in black or white. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.
SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
B-1232CL-U3 ICY BOX Dual HDD / Hard Drive USB 3.0 docking station for SATA 2.5 inch and 3.5 inch hard disk cloning station and reader, adapter, external Manufacturer information: HUGE CAPACITY: Expand your capacity with a dual docking and cloning station for 2.5" and 3.5" SATA drives. With SINGLE mode, both hard drives are recognized as separate drives SYSTEM REQUIREMENTS: A free USB 3.0 Type-A port on the host computer is enough to freely expand the storage capacity. The dock supports Windows and macOS VERY FAST: The USB 3.0 host connection supports UASP and guarantees data transfer speeds of up to 5 Gbit/s. You can also transfer large amounts of data without long waiting times HARD DRIVE CLONING: You can clone bootable hard drives at the touch of a button, even without a computer. The docking station draws power from the included power adapter. Data backup can be that simple ALWAYS INFORMED: Hot-swappable hard drives are easy to replace and boot. A total of four LEDs inform you of the cloning status and progress
Compact AXAGON ADM2-CM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-C cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-C to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 19 g. USB-C male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
Streamline your work with Natec MayflyAre you looking for a compact and functional USB HUB that will allow you to use more accessories? Meet Natec Mayfly a USB HUB with up to 4 USB-A 3.0 ports and an adapter that will connect it to both USB-C and the classic Type A connector. Small size, high data transfer speed and readiness to operate without unnecessary drivers this is Natec Mayfly.MAIN FEATURESDo more with faster data speedsSpeed up your data transfer no matter where you are. Take advantage of up to 4 USB-A 3.0 ports offering speeds of up to 5 Gbps, which is significantly faster than USB 2.0. Do you want to work more efficiently and save time? With Natec Mayfly it is possible.Connect where you wantWant to connect Natec Mayfly to the USB-C socket? Or maybe you prefer to use the included USB-A adapter? Natec Mayfly is highly versatile, it works with older and newer hardware seamlessly.Always with youWorking in the field? With Natec Mayfly it's easier than you think. Small dimensions (106 x 29 x 11 mm) and a weight of only 40 grams will allow you to take it with you almost anywhere. You can easily fit it into your suitcase, backpack, bag or even pocket.ADDITIONAL FEATURESBuilt-in LEDIn everyday work, the built-in LEDs will also be useful, indicating correct operation. It will also make it easier to locate the connected HUB when you want to work in a dark room or at night.Plug & PlayNatec Mayfly works as soon as you connect to it. You do not need to install additional drivers or unnecessary control applications. All you have to do is connect it to your computer. It is that easy.
The Neomounts DS75-450WH2 NEXT Core is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 8 kg per screen. The versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screens. Additionally, the mount has gas spring height adjustment (27,7-56 cm) and depth adjustment (0-50,5 cm), to create the perfect working position. The DS75-450WH2 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS75-450WH2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450WH wall adapter is optionally available.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The DIGITUS DA-73112 USB extension cable is designed to enhance connectivity with its data transfer capabilities. Supporting USB 3.0 and USB 3.1 standards, this double shielded cable allows for a maximum data rate of up to 5 Gbps, ensuring efficient performance.Featuring a male 24 pin USB-C connector on one end and a female 24 pin USB-C connector on the other, this cable offers versatility and ease of use. With its sturdy design and reliable functionality, the DIGITUS USB extension cable is a solution for extending your USB connection, making it an accessory for various devices.
The DIGITUS USB extension cable DA-73113 is designed to enhance your connectivity experience. This reliable cable boasts USB 3.2 compliance, ensuring high-speed data transfer. With its double shielded technology, you can expect reduced interference for better performance. Featuring a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable allows for seamless connections between devices, making it ideal for various setups, whether at home or in the office.
The DIGITUS USB extension cable DA-73111 offers reliable connectivity for your devices. With compliance to USB 3.0 and USB 3.1 standards, this cable ensures fast data transfer speeds of up to 5 Gbps. Its double shielded design helps protect against interference, ensuring a stable connection.Equipped with a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable is versatile and compatible with a wide range of devices. Whether extending the reach of your peripherals or setting up your workstation, the DIGITUS USB extension cable provides dependable performance and connectivity.
The Neomounts by Newstar AWL-250BL16 is a universally applicable VESA extension kit for wall mounts with a maximum weight capacity of 75 kg. With the extension kit, the VESA can be extended from 400 mm to 500 or 600 mm. The kit is installed on top of the existing brackets of the wall mount and is usable for both landscape and portrait mounting. Functionality Type: Full motion, Tilt, Fixed, Swivel Height: 64 cm Width: 8 cm Depth: 1 cm
Professional Series Freestanding Dual Stacking Monitor Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain Dual monitors are in stacked position to save space in tight workspaces Surface mount allows dual monitors to be used in spaces that do not allow a clamp or grommet mount Holds up to 32” monitors up to 16kgs in total Low profile weighted base provides enhanced stability Intuitive cord management system helps minimize clutter Specifications: +/-45° Tilt, +/- 90° Pan, 360° Rotation VESA 75 x 75 and 100x100 compliant
Desk mounted adjustable monitor arm, space grey Position your screen perfectly Lightweight and tilting design Monitor desk mount with single monitor arm Arm rotates, extends and retracts, tilts to change reading angles, and allows to rotate display from landscape-to-portrait mode, etc Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 32") Durable adjustable gas-springs suitable for monitors of 2 - 9 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
Der 90 Watt Netzadapter DELL-14P3N ist speziell auf die Erfüllung der Stromanforderungen eines Dell Notebook ausgelegt. Über den leistungsstarken 90 Watt Netzadapter kann das System zum Betrieb und zum gleichzeitigen Aufladen des Akkus an die Stromversorgung angeschlossen werden. Im Lieferumfang ist ein 1 Meter langes Netzkabel enthalten. Jetzt muss das Netzteil nicht mehr zwischen Büro und Zuhause hin- und her getragen werden. Mit einem zweiten Netzadapter für das Notebook ausgestattet, hat man einen fürs Büro und einen für Zuhause oder unterwegs. Der 90 Watt Netzadapter DELL-14P3N ist mit einem Gummiriemen zum einfachen Kabelmanagement und einem LED-Leuchtring auf dem Gleichstromanschluss ausgestattet. Originalteile von Dell werden strengen Tests durch qualifizierte Techniker unterzogen, um Kompatibilität und Zuverlässigkeit sicherzustellen.
Neomounts AV30-500BL. Toote tüüp: Videobaari kinnitus, VESA-paigaldusliidesed: 200 x 200,200 x 300,200 x 400,400 x 200,400 x 300,400 x 400,400 x 600,600 x 300,600 x 200,600 x..., Ekraani minimaalne suurus: 109,2 cm (43"). ...
HP Bright White Inkjet Paper is HP's brightest, low-cost paper for everyday black and colour line drawings. The specially treated surface dries instantly and consistently produces crisp line resolution and high-contrast colour prints.
Original part number CC-HDMI4-15 Product name Gembird HDMI V1.4 male-male cable with gold-plated connectors 4.5m, bulk package Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video HDMI plugs 2x male HDMI A-type (19-pin, Single Link) Cable length 4.5 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information HDMI V1.4
Original part number CCP-USB3-AMBM-6 Gembird USB 3.0 A- B 1,8m cable Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type2x USB 3.0 Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue More info Strona producenta [EN]
Original part number CCP-USB3-AMAF-6 Gembird USB 3.0 extension A-plug A-socket cable 6ft Class of product Cables - USB plugs 1x male USB A-type1x female USB A-type Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue More info Strona producenta [EN]
Original part number AU0004A Product name LOGILINK - Adapter USB for 2x PS/2 Producer LogiLink Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type USB A-type Plug 2 type PS/2 female Other information Other information Colour Grey Additional information USB to PS / 2 AdapterConnector 1: USB A maleConnector 2: 2x Mini DIN 6-pin connectorSuitable for mouse and keyboardPower supply via USB PortCable length: 20 cm More info See product on the manufacturer's website [Link]
Premium quality ImageLast laminating pouches for superior laminating results every time, Unique arrow directional quality mark disappears when laminated, Ideal for notices, photos, instructions and frequently handled documents, ...
Original part number A-USATA-01 Product name Gembird External USB to SATA adapter for slim SATA SSD/DVD Producer Gembird Class of product Others controllers/adapters Bus type USB 2.0SATA I/II Internal connectors 1 x USB 2.0 External ports 1 x SATA Low-profile card No Net weight 33 g Additional information USB adapter for slim SATA 13-pin SSD, DVDSecond USB connector for extra powerOS independent, no driver installation necessarySupports any SATA slim 13-pin driveCable length: 50 cm
Original part number BL-1583E.00U305 Product name BELDENCAT 5e twisted pair installation cable 305m Producer DIGITUS Class of product Installation network cable Wire type UTP - unschielded twisted pair cable, 4 pairs Category 5e Inner conductor diameter no data Coating type PVC - polyvinyl chloride Additional functions no data Additional information no data Length 305 m Colour Grey Gross weight 9.5 kg Packaging type BOX
Original part number Y-A025CGY Product name Unitek Adapter USB type-C - USB 3.0,Y-A025CGY Producer Unitek Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type USB 3.1 Type-C (male) Plug 2 type USB 3.0 Other information Other information Colour Silver Additional information Hot Swap, Plug&Play; Adapter USB 3.0 to USB3.1 Typu C
Original part number 5627501 Product name Binder Fellowes Star + A4 Producer Fellowes Class of product Binders Technical parameters Technical parameters Binding type Plastic comb Maximal quantity of binded sheets (80g/m2) 150 Pcs Maximal quantity of stapled sheets (80g/m2) 12 Pcs Maximal diameter of comb 19 mm Waste bin Yes Other information Other information Width 80 mm Depth 448 mm Height 280 mm Net weight 4.26 kg More info More info [LINK]
Original part number 5227901 Product name Binder Fellowes Starlet 2+ Producer Fellowes Class of product Binders Technical parameters Technical parameters Binding type Plastic comb Maximal quantity of binded sheets (80g/m2) 120 Pcs Maximal quantity of stapled sheets (80g/m2) 12 Pcs Maximal diameter of comb 16 mm Waste bin No
