Universal Travel Verbatim UTA-04 Adapter can be used in more than 180 countries take it everywhere with you and never be out of power. This world-to-world multi plug will allow you to connect to any local power supply around the world and recharge your power-hungry devices, like laptops and camera batteries. The USB-C and USB-A ports on the bottom can charge all your USB devices including smartphones, Bluetooth speakers, tablets, power banks, and Kindles. Superfast 6-in-1 charging The compact and powerful Universal Travel Adapter allows six devices to be charged simultaneously through the AC power socket and the two USB-C and three USB-A ports. With a high-power USB-C port that supports 61W Power Delivery (PD) and Quick Charge (QC) 3.0, it delivers superfast charging. Just push the sliders on the side of the multi plug to reveal the three most common international plugs - EU, UK, and US - and rotate the pins for sockets in Australia or China.
Goobay provides the perfect electronic accessories to connect your consumer electronics. Our products transmit top-quality signals for a razor-sharp picture and excellent sound. The robust construction and high-quality materials of our connection cables and plugs create a perfect entertainment experience. Simply. All. You need! High-resolution signal transmission with up to 8K @ 60 Hz (4320p) Connection cable with max. transmission rate of up to 32.4 Gbit/s 8K cable especially for gaming. Smooth images without judder thanks to high refresh rates of up to 240 Hz (depending on graphics card and monitor). Gold-plated DisplayPort plugs and advanced technology guarantee perfect signal transmission, clear sound, razor-sharp video and picture quality. The DisplayPort cable transmits high-resolution video signals and HD audio signals, e.g. from a computer or laptop to a screen or projector. Plug lock ensures a secure hold without loose contacts and is easy to unlock via the push-button. To avoid short-circuit damage, pin 20 is not connected (no power supply).
Supports 4x 2.5" SAS/SATA HDDs/SSDs (up to 9.5mm drive height)Install into any standard external 5.25" drive baySupports SATA 6Gbp/s transfer speeds & SAS up to 12Gbp/s (SAS host required)Tray-less and door-less design for hot-swapping bare drives without tools or screwsReduce cable clutter by using a single 15-pin SATA power connection to power four drivesSoft blue drive activity LED for each drive (Solid blue for power and flashing blue for drive activity)Supports SATA 7-pin data and 15-pin power cables with a locking latch designIndustry-leading 3-year warranty against all defects & Complimentary support from professionally trained technical support agents
Lindy's range of slim DisplayPort cables provide a more flexible and high-quality DP connection solution, utilizing a specially designed compact, low profile connector and a smaller diameter cable structure. With their compact, high-performance design, these cables are ideal for situations where space is limited around source and display ports, such as with gaming monitors or graphics cards. Their triple shielded 30 AWG pure copper conductors ensure overall improved performance, while gold-flashed phosphor bronze pins protect against corrosion and fatigue.High quality 24K gold plated contacts and connectors maintain optimal signal integrity and maximum reliability. Supporting DP 1.4 resolutions including 8K @ 60 Hz and 4K @ 144 Hz, these cables are great for high-level gaming setups, whether in the home or in an eSports arena, or alternatively with small-scale, digital signage installs such as Shop-in-Shops or concession stands.
Discover a solution for extending your KVM, audio, USB, and infrared signals over long distances with the Lindy KVM / audio / USB / infrared / network extender. This device is engineered to support high-resolution video up to 3840 x 2160 at 60 Hz, making it suitable for applications requiring high video quality. With the capability to transmit signals up to 150 m over CAT 6 cabling, it offers flexibility for your installation needs.Featuring a robust set of inputs and outputs, including HDMI, USB, and IR, it provides comprehensive connectivity options to suit a wide range of devices. The extender is designed to perform in diverse environmental conditions, operating reliably across a broad temperature and humidity range. Advanced features such as EDID Pass-Through, HDMI Pass-Through, and HDR support ensure a seamless user experience, while compliance with multiple standards including CA65, FCC, REACH, RoHS, and UKCA ensures quality and reliability. Whether for professional AV setups, digital signage, or conference room applications, this extender delivers on both performance and durability.
The Lindy KVM/audio/serial/infrared extender is a comprehensive solution designed to meet the needs of businesses and professionals requiring high-quality video and audio transmission over long distances. With its ability to support 4K resolutions at 60 Hz, it ensures that the video quality remains pristine, making it perfect for applications where detail and clarity are paramount. The device's robust metal housing ensures durability, while its wide range of connectivity options, including HDMI, USB 2.0, and IR, offers flexibility in connecting various devices. Additionally, the extender's HDR support and 18 Gbps bandwidth mean that it can handle high-definition content with ease, providing an immersive viewing experience. Its capability to transmit signals up to 150 m over CAT 6 cabling makes it an ideal choice for large venues or buildings where distance could be a challenge. Whether for digital signage, educational purposes, or professional AV setups, this extender delivers reliability, performance, and quality.
Travel adapter, US socket - EU plug AP-01 The AP-01 travel adapter is an essential accessory for those travelling between the US and Europe. It enables devices with a US plug to be connected to European sockets (EU). This solution allows you to use your electronics freely during your trip. Thanks to its compact and lightweight design, the adapter will easily fit into any travel bag. Compactness Easy to use and versatile For use with earthed and ungrounded devices Why choose a Savio travel adapter? The AP-01 adapter with EU plug and US socket provides convenience and safety when using American electrical appliances in Europe. This small device has a number of practical features, including: easy connection of various electrical appliances (e.g. hairdryer, smartphone) to the US plug in countries with German and French socket systems; convenient transportation thanks to its compact size and lightweight design; compatibility of the Savio adapter with type A and B plugs and for use with type E and F sockets, the so-called European 3-pin sockets; safety of use thanks to earthing; high load power - up to 3750 W. Configurators Country of origin: Antigua and Barbuda, Bahamas, Barbados, Belize, Bermuda, Bolivia, Cambodia, China, Colombia, Costa Rica, Cuba, Democratic Republic of the Congo, Ecuador, El Salvador, French Polynesia, Guam, Guatemala, Guyana, Haiti, Honduras, Jamaica, Japan, Canada, Laos, Lebanon, Liberia, Mexico, Micronesia, Netherlands Antilles, Nicaragua, Peru, Philippines, Puerto Rico, Saint Vincent, Saudi Arabia, Tahiti, Taiwan, Thailand, Trinidad and Tobago, US Virgin Islands, United States of America, Venezuela, Vietnam, Yemen Destination country: Liberia, Madagascar, Mali, Martinique, Monaco, Mongolia, Morocco, Niger, Poland, Reunion, Saint Vincent and the Grenadines, Senegal, Slovakia, Syrian Arab Republic, East Timor, Tunisia, Afghanistan, Albania, Algeria, American Samoa, Andorra, Armenia, Aruba, Austria, Azerbaijan, Belarus, Bhutan, Bosnia and Herzegovina, Bulgaria, Cape Verde, Chad, Croatia, Denmark, Egypt, Estonia, Ethiopia, Faroe Islands, Finland, Georgia, Germany, Greece, Greenland, Guinea, Hungary, Iceland, Indonesia, Iran, Italy, Jordan, Kazakhstan, Democratic People's Republic of Korea, Republic of Korea, Kyrgyzstan, Lao People's Democratic Republic, Latvia, Liberia, Libya, Lithuania, Luxembourg, Macao, Macedonia, Moldova, Monaco, Montenegro, Mozambique, Myanmar, Netherlands, Netherlands Antilles, New Caledonia, Niger, Norway, Portugal, Romania, Russia, San Marino, So Tomé and Príncipe, Serbia, Slovenia, Spain, Suriname, Sweden, Tajikistan, Thailand, East Timor, Turkey, Turkmenistan, Ukraine, Uruguay, Vietnam, Bahrain
The WireView Pro GPU is an advanced device for measuring and monitoring the power consumption of graphics cards. Developed in collaboration with Jon "elmor" Sandström, the WireView Pro GPU connects to the graphics card's 12VHPWR power connector and links to the power supply via the power cable. Power consumption data is shown on an OLED display. The Pro version has been improved with connector detection and temperature sensors. An integrated buzzer provides an audible warning if an adjustable temperature or current limit is exceeded, if the cable is not properly connected, or if an incorrectly specified cable is in use. OLED display Power consumption measurement Power consumption recording Internal temperature sensors at the power connectors External temperature sensors Pin detection for sensor-pin connectors Alarm function Optimized cable management The WireView Pro GPU enables the measurement and monitoring of power consumption from graphics cards via the 12VHPWR power connector and records this data to determine power usage. This information can be used to calculate the operating cost of a graphics card or compare its consumption with other graphics cards. A special 60-second measurement cycle allows for a quick and convenient display of power consumption, making it especially useful for reviews. It can also be used to assess power consumption in specific scenarios or over certain periods. Additionally, it can detect power spikes that occur when using modern high-end graphics cards. The Pro version includes enhanced connector detection, temperature sensors, and an audible warning signal. The WireView Pro GPU’s connector detection identifies whether a cable specified for 150 watts, 300 watts, 450 watts, or 600 watts is being used. Please note that the WireView Pro GPU measures power consumption only through the power connector, not through the motherboard’s PCIe slot. If an incorrect cable is used or the cable is not properly connected, an audible warning will sound. Two temperature sensors located on the board at the power connectors monitor temperatures at those connectors. Up to 600 watts can pass through the connectors, potentially heating them and the surrounding board. An audible alarm will sound if the temperature exceeds an adjustable limit. Two additional temperature sensors (10K NTC) can be connected via cables; two sensors with cable lengths of 5 cm and 20 cm are included. The alarm can also be triggered if the adjustable current limit (amps) is exceeded. The WireView Pro GPU displays measured values on the OLED screen. By pressing a button, you can toggle through the displayed values. The following values may be shown: Current power consumption in watts (W) Current voltage in volts (V), current in amperes (A) Minimum and maximum power consumption in watts (W) Average power consumption over 60 seconds (RAVG in W) and total energy used (E in Wh) Measured temperatures of individual temperature sensors (°C) The WireView Pro GPU is available with the 12VHPWR 16-pin power connector (4x sensor + 12x power/ground) in "Normal" (N) and "Reverse" (R) versions: If the graphics card uses power connectors with the four sensor pins located between the PCB and the 12 power pins, the "N" version is required (PCB - 4x sensor pin - 12x power pins). If the graphics card uses power connectors with the 12 power pins located between the PCB and the four sensor pins, the "R" version is required (PCB - 12x power pins - 4x sensor pin). Note: When using the 12VHPWR adapter, ensure each of the three or four 8-pin PCIe connectors is connected to the power supply with a separate 8-pin PCIe cable. The use of splitters (Y-cables) is strongly discouraged! Warning – Important Notice: Risk of Injury! Depending on the graphics card used, especially with the GeForce RTX 4090, up to 450 watts of power can pass through the WireView connectors. This can cause the PCB at the WireView connector to heat to 60 degrees Celsius with an air-cooled card. With a water-cooled card and no airflow, the WireView PCB can heat up to 100 degrees Celsius! Do not touch the WireView casing during operation. After shutting down the system, allow the WireView to cool before handling.
Conceptronic ETTA03B12. Kaabli pikkus: 1,2 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB 2.0, Maksimaalne andmeedastuskiirus: 0,48 Gbit/s, Toote värv: Must
Conceptronic ETTA03B20. Kaabli pikkus: 2 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB 2.0, Maksimaalne andmeedastuskiirus: 0,48 Gbit/s, Toote värv: Must
Conceptronic ETTA04B12. Kaabli pikkus: 1,2 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB4 Gen 3x2, Maksimaalne andmeedastuskiirus: 40 Gbit/s, Toote värv: Must
The Lindy Hybrid USB-C cable is a versatile and durable solution for all your connectivity needs. With support for 4K30Hz resolution, it delivers exceptional video quality, making it perfect for professional presentations or immersive entertainment experiences. The cable's USB-C Power Delivery supports up to 60 W, allowing for efficient charging of devices. It is compliant with USB 3.2 Gen 1 and DisplayPort 1.4 standards, ensuring fast and reliable data transfer. The durable PVC jacket and tinned copper shielding minimize signal interference, providing a stable connection in any environment. Whether for work or play, the Lindy Hybrid USB-C cable is designed to meet the demands of modern technology.
Limits the viewing angle to +/- 30 °, hiding personal or confidential information from anyone trying to look from the side Reduces harmful blue light by up to 30% It can be installed using the included frameless or double-sided tape holders Anti-reflective coating reduces glare and improves clarity Double-sided with matte and glossy display options It protects the monitor screen from scratches and damage
Limits the viewing angle to +/- 30 °, hiding personal or confidential information from anyone trying to look from the side Reduces harmful blue light by up to 30% It can be installed using the included frameless or double-sided tape holders Anti-reflective coating reduces glare and improves clarity Double-sided with matte and glossy display options It protects the monitor screen from scratches and damage
Charge & sync cable CLN30SC Experience the best charging solution for your Apple devices with the CNS-CLN30SC20W. This premium USB-C to Lightning cable delivers fast charging speeds, high-performance data transfer, and exceptional durability in a convenient 2-meter length. With a powerful 27W output, the CNS-CLN30SC20W rapidly charges your iPhone, iPad, or AirPods. Here’s to more uninterrupted use of your favorite Apple devices without the hassle of long charging times! Move files, photos, and videos effortlessly between your Apple devices and a compatible computer with the cable's impressive 480MB/s data transfer speed. Back up what matters to you – whether it’s important files or precious personal memories. The CNS-CLN30SC20W's generous 2-meter length provides you with the freedom to charge and transfer data from a comfortable distance. Whether you're sitting on the couch, working at your desk, or in bed – you're always within reach of a power source with this cable. Crafted from durable TPE material, the CNS-CLN30SC20W will easily handle the rigors of everyday use. The flexible cable is easy to carry and store, so you can always have it on hand when you need it. The CNS-CLN30SC20W is fully compatible with all Lightning-equipped Apple devices, including the latest models. Enjoy the convenience of a single cable for all your charging and data transfer needs. Ready to discover the power of fast charging, seamless connectivity, and unmatched flexibility? Order today and unlock the full potential of your Apple devices. Features: USB-C → Lightning 27W 480MB/s Length: 2 m USB 2.0 Soft TPE TPE
The Club 3D CAC-3011 USB-C cable is designed for reliable connectivity. With 24 pin USB-C connectors on both ends, this cable supports fast charging of up to 60 watts, ensuring devices can quickly regain power during use. The Mylar shielding and strain relief features enhance its durability and protect against electromagnetic interference, suitable for various environments.This cable is built with an e-marker chip that supports fast charging and enables data transfer rates of up to 480 Mbps. The thermoplastic elastomer jacket provides added flexibility and resistance to wear and tear, ensuring longevity. Additionally, the cable complies with FCC, RoHS, and EMI standards, affirming quality and safety for everyday use.
The Club 3D CAC-3010 USB-C cable provides a reliable and efficient connection for various devices. With a robust build featuring Mylar shielding and a strain relief design, this cable ensures durability and protection against electromagnetic interference. It supports fast charging capabilities of up to 60 W, allowing devices to charge quickly while also delivering data transfer rates of up to 480 Mbps. The cable complies with FCC and RoHS standards, ensuring both safety and environmental responsibility. Made from thermoplastic elastomer (TPE), its beaded design makes it functional and aesthetically pleasing, providing a seamless experience for connectivity needs.
The Neomounts Select NM-D775DXWHITE is a tilt-, swivel and rotatable desk mount with crossbar and handle for 2 flat screens up to 32". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. Neomounts Selects' unique tilt (20°), rotate (360°) and swivel (180°/360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 60 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. Neomounts Select NM-D775DXWHITE with handle has three pivot points and is suitable for screens up to 32" (81 cm). The weight capacity of this product is 1 to 16 kg (max. 8 kg each screen). The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts Select VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Min. screen size: 10 inch - Max. screen size: 32 inch - Min. weight: 1 kg (per screen) - Max. weight: 8 kg (per screen) - Desk mount: Grommet, Clamp - Tilt (degrees): 20° - Swivel (degrees): 180° - Rotate (degrees): 360° - Type: Full motion, Tilt, Rotate, Turn - Height adjustment: Gasspring - Depth: 0-63 cm - Height: 27-60 cm
Elevate your laptop to a comfortable viewing position to reduce eye, neck and shoulder strain. Effortless finger touch height adjustment with spring arm design. Easily collaborate with colleagues with flexible movement. Keep tangle free with built-in cable management. Stylish, design available in black or white. This product has received the Ergonomics Excellence Award by FIRA International. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.
Stand for batteries UPS 830X454 2x4(8) black OR01-830454-204-BK Lanberg Battery Frame is an indispensable, modular element of complex emergency power systems. The product itself is dedicated to the installation of multiple batteries, while its rugged construction is designed to be flexible and allow users the freedom of access. Individual components of the battery frame are made of steel with the following thicknesses: Supporting elements: 2.0 mm Metal angles: 2.5 mm The battery frame is characterized by high mechanical resistance, easy access and structural strength. The surfaces were finished by degreasing, etching and phosphating them, thus increasing the protection against rust. The application of electrostatic powder paint ensures adequate durability of the coating. The modular battery frame for self-assembly is packed in a single flat pack, which facilitate transport, as well as quick and easy assembly at the chosen installation site.
Power strip with 5 sockets, allows up to five full-size plugs to be connected simultaneously. It has child protection, an illuminated mains switch and separate switches for each socket. Excellent in any workshop, shop or even at home. Today's reality requires the connection of a large number of devices to sockets. With the help of power strips, our power strip is the ideal solution.
Der PoE-Splitter DN-95211 von Digitus liefert Daten und Strom mit bis zu 51 Watt über ein einziges Ethernet-Kabel an Geräte, die PoE nicht unterstützen und splittet die 48 VDC Leistung über RJ-45 Ethernet Kabel in verschiedene DC Ausgänge auf. Einfach den Eingang des Splitters an einen PoE Switch oder PoE Injector anschließen und die Ausgangsseite an ein Nicht-PoE-Netzwerkgerät wie z.B. einen Access Point, IP-Telefon oder eine Kamera, um Strom und Daten bereitzustellen. Der Extender selbst wird über PoE mit Strom versorgt, so dass keine zusätzliche Stromversorgung erforderlich ist. Die Ausgangsspannung kann über einen Dip-Schalter auf 12V oder 24V geregelt werden. So erweitert dieser Splitter das Netzwerk dort, wo Netzwerkgeräte platziert werden sollen, für die keine Steckdosen verfügbar sind.
