Height-Adjustable Monitor Stand, 1732 inches, up to 8 kg Position your screen perfectly for an optimal, ergonomic setup Compact, space-saving solution Product Features: Height-adjustable, fully movable monitor stand 10-level height adjustment adapts to different monitor sizes and provides a better viewing height Allows screen rotation and tilt, as well as switching between landscape and portrait mode Works with almost any LCD monitor (max. 32" / 8 kg) Sturdy base plate for secure placement on any desk Built-in cable management for an organized and tidy workspace VESA compliant, max. 100 × 100 mm
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product's key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
• "Max VESA: 800 x 600 • Max Loading weight: 90kg • Built-in Cable management • VESA standards compliant • Manual Height-Adjustable Display Wall Mount • Smooth and Effortless Height Adjustment: high-low adjustment with finger touch positioning • Weight Balance Design: easily accommodates the different weights of displays • Heavy-Duty steel construction holds the heaviest TVs with confidence • Compact Design: allows the mount to hide behind the screen when not in use • High Quality Powder-Coated Finish: features a stylish anti-scratch surface"
See Delocki kaabel võimaldab ühendada HDMI-monitori USB-C™-i või Thunderbolt™ 3-pordiga arvuti või sülearvutiga, nagu MacBook või Chromebook. Liides peab toetama DisplayPorti alternatiivrežiimi. Spetsifikatsioon • Ühendused: 1 x USB Type-C™ isane 1 x HDMI isane • Kiibistik: Parade PS176 + Cypress • Kiire HDMI Etherneti (HEC) spetsifikatsiooniga • Signaali suund: USB Type-C™ sisend > HDMI väljund • Eraldusvõime kuni 3840 x 2160 @ 60 Hz (olenevalt süsteemist ja ühendatud riistvarast) • Heli- ja videosignaalide edastamine • Toetab 3D-kuvasid • Toetab HDCP 1.4 ja 2.2 • USB toitega • Plug & Play • Ühendused: kullatud • Värvus: must • Pikkus ilma pistikuteta: ca. 2 m
USB autolaadija, kiirlaadija 12W max. 2.4A (12/24V) 1xUSB QC3.0 output: 3.6 V - 6.0 V -3 A / DC, 6.1 V - 9.0 V - 2 A / DC, 9.1 V - 12 V - 1.5 A DC Quick charger in mini format charges devices on the cigarette lighter Quick charger with QC 3.0 charges devices in the cigarette lighter up to 4x faster than conventional chargers. Due to its extremely compact design, the charging adapter almost completely disappears in the cigarette lighter and turns it into a USB socket. It can be easily removed with the fingertips. Compatible with smartphones like Apple iPhone, Samsung Galaxy, Nokia, Xiaomi, Google Pixel, LG, Huawei, Blackberry, tablets like Apple iPad Pro / Air / Mini, Powerbank and external batteries. Suitable for use in cars with 12V as well as in trucks with 24V input voltage An integrated protection electronics secures the connected devices and offers multiple protection against overcurrent, overload, overheating.
The Neomounts DS60-425BL2 NEXT Lite is a full motion desk mount for two screens up to 27" with a maximum weight capacity of 8 kg per screen. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal viewing angle for your screens. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screens to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS60-425BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS60-425BL2 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.
STRIMER WIRELESS 24P – Controller Included L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
Vention AAIBG HDMI cable 1.5m (black)Watch movies in high quality with Vention. The cable provides HD video in 4K and supports 3840 x 2160@60Hz. What's more, you can enjoy Hi-Fi sound and perfect audio and video synchronization. In addition, dynamic HDR is responsible for the richness of colors, and thanks to the use of durable materials and gold-plated connectors, the product is wear-resistant and efficient. In addition, you can successfully connect it to your laptop, TV, projector, PS3/4, etc. ManufacturerVentionModelAAIBGColorblackLength1,5 mVersion2.0InterfaceHDMI to HDMIResolution4K 60 HzMaterialaluminum, metal, PVC
• HDMI Male to Male • HDMI 2.1 compatible • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 8K/60Hz • Bandwidth up to 48Gbps • Supports HDR10, HLG, HDCP 2.3, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Supports video resolutions up to 8K/60Hz, 4K/120Hz • Up to 1536 kHz audio sampling rate • Dynamic HDR (HDR Dynamic Metadata) • Enhanced Audio Return Channel (eARC) • Variable Refresh Rate (VRR) • Quick Media Switching (QMS) • Quick Frame Transport (QFT) • Auto Low Latency Mode (ALLM) • Display Stream Compression (DSC) • Zinc Alloy housing • Gold Plated connectors for high transmission quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using
Kahekordne USB-C™ PD kiirlaadija (36 W), valge Laadimisadapter 2x USB-C™ pordiga (Power Delivery) USB-laadijat saab kasutada mobiiltelefonide, kaamerate, kõrvaklappide, nutikellade, tahvelarvutite ja palju muud. Kompaktne laadimispistik ühendatakse otse pistikupessa. Goobay toiteallikas laeb USB-seadmeid ülikiirelt. USB-C™-laadija kaks porti võimaldavad kiirlaadida korraga kuni kahte seadet. Seinalaadija ühildub nii nutitelefonide kaubamärkidega nagu Apple, Samsung, Xiaomi, LG, Huawei kui ka tahvelarvutitega nagu Apple iPad. Tänu sisendpinge vahemikule 110-240 V saab USB-C™-toiteallikat kasutada ka välismaal. Tänu oma kompaktsele disainile ja kergele kaalule ei ole USB-C™ adapter mitte ainult mugav abivahend kodus, vaid sobib ideaalselt ka reisil olles.
MRCS155 | 3 m | HDMI Type A (Standard) | Male | HDMI Type A (Standard) | Male | Product colour Black | HDMI Ethernet channel Yes | Connector contacts plating Gold
adapterikomplekt HDD ja SSD kõvakettadele, CD- ja DVD-ajamitele, sh toiteallikas ja ühenduskaabelVõimas vahend varundamiseks ja ülikiireks andmetele juurdepääsuks! Suure jõudlusega adapter on paindlik lahendus andmete varundamiseks ja IDE-, SATA- ja SATA SSD-kõvaketaste lugemiseks. Adapteriga saate kiiresti ja lihtsalt ühendada vanad kõvakettad sülearvutite ja muude vastuvõtvate seadmetega, ilma et oleks vaja neid arvutisse paigaldada. Tänu Plug & Play funktsioonile tunneb vastuvõttev seade kõvaketta ühendamisel ära, mistõttu ei ole vaja paigaldada eraldi draivereid.Kompaktne adapter kuni kolme IDE-, EIDE- või SATA-kõvaketta ühendamiseks arvutiga korraga - lihtsalt USB kaudu.Ühendage sisseehitatud kõvakettad hõlpsasti USB-A kaudu host-seadmetega - ilma, et neid oleks vaja paigaldada lauaarvutisse või kõvakettakesta korpusesse.SATA-USB-adapter sobib ideaalselt andmete varundamiseks, andmete taastamiseks või kõvaketaste ja CD/DVD-ketaste testimiseks.Adapteriga ühendatud SSD-kõvakettad saavutavad andmeedastuskiiruse kuni 248,5 Mbit/s.Sisseehitatud olekuledid näitavad vastava pordi toite ja andmeaktiivsustKaasas USB 3.0 A-tüüpi B-tüüpi kaabel kuni 5 Gbit/s andmesidekiiruseks, mis ühildub tagurpidi USB 2.0-ga.Sisaldab 12 V toiteplokki välise toiteallika jaoks ja Molex-kaablit IDE/SATA-ketaste (2,5 ja 3,5 tolli) ühendamiseks.
FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes
Professionaalne valik USB 2.0 tüüp A - B kaabel äri- ja kõrgtehnoloogiliste AV- ja IT-seadmetele Toetab andmeedastuskiirusi kuni 480Mbps Tugev PVC-korpus, nikliühendused ja kullatud kontaktid Kahekordne varjestatud kaabel, korrosioonikindlad vaskjuhtmed
The Lindy VGA to DisplayPort Converter is a compact, premium solution for connecting a DisplayPort monitor or display to legacy VGA source devices. Supporting resolutions up to Full HD, this sleek converter is perfect for use in offices at home, in the workplace or in education, or for connecting analogue PC systems to eye-catching digital signage displays.An additional 3.5 mm VGA audio connection also allows for audio to be embedded into DisplayPort to provide 2CH stereo to compliment a professional video experience, while a separate USB Type A connection ensures there is always enough power for even the most demanding scenarios.
Connections Connection, type USB 3.0 male (type A) Connection 2, type USB 3.0 male (type A)Cable Cable type round cable AWG 28 Cable length 1.8 m Number of shieldings 3 xSignal transmission max. transmission rate 5 Gbit/sGeneral Consumption Unit 1 pc. in polybag Color black
Das Sharkoon Patchkabel RJ45 Cat.6a SFTP eignet sich zum Verbinden von Computern mit einem Hub bzw. Switch innerhalb eines Ethernet Netzwerkes (Gigabit-Ethernet geeignet), oder zum Anschluss eines DSL-Modems an den Computer. Das Kabel entspricht Cat.6 und verfügt über eine SFTP-Abschirmung (Screened Foiled Twisted Pair).
Universal freestanding desk mount for mounting monitors of various brands with weight up to 8 kg and screen diagonal from 13" to 27". Compatible with LED, LCD, OLED monitors: Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, Iiyama, Acer. To the mount we can easily attach the screen in VESA standard: 75x75, 100x100 mm. Cable grommets help keep cables organized. This reduces desk clutter, resulting in a neater look and a more organized workspace. The removable VESA plate makes the process of installing the monitor on the mount quick and easy. This is a practical solution for people who want to mount or remove their monitor quickly and easily. - Manufacturer: Maclean - Model: MC-987 - Color: black - Maximum load: 8 kg - Swivel adjustment: 360° - Cable grommets - Adjustable tilt from +45° to -45° - Designed for monitors with screen diagonal: from 13" to 27" - Overall height: 41 cm - Base dimensions: 40 x 29.6 cm - Removable VESA plate - VESA: 75x75, 100x100 mm
Raspberry Pi SC1166 M.2 HAT+ for Raspberry Pi 5 - Raspberry Pi M.2 HAT+ for Pi 5 allows users to connect M.2-format PCIe and NVMe devices to the PCIe FPC connector on Raspberry Pi 5. This HAT+ is an adapter board that supports 2230 and 2242 formats M.2 Non-Volatile Memory Express (NVMe) drives in both PCI Express Gen-2 and higher-performance Gen-3. The M.2 HAT+ for Pi 5 conforms to the HAT+ specifications and is automatically detected by the newer Raspberry Pi software/firmware. This adaptor board is supplied with a 16mm stacking header and spacers/screws to be fitted to a Raspberry Pi 5 with the Active Cooler in place. The 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories. The M.2 HAT+ board comes in 65.1mm x 56.7mm x 5.6mm dimensions and 13g weight. 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories Conforms to the HAT+ specification Automatically detected by the new Raspberry Pi software/firmware Supplied with a 16mm stacking header and spacers/screws to enable the M.2 HAT+ to be fitted to a Raspberry Pi 5 with the Active Cooler in place 65.1mm x 56.7mm x 5.6mm (max) (L x W x H) dimensions 13 grams weight
Das mini-DisplayPort Adapterkabel 83485 von Delock ist zum Anschluss von Geräten mit DisplayPort Schnittstelle geeignet, wie z.B. Bildschirmen, Beamern oder Fernsehgeräten, an einen PC oder ein Notebook. Das dreifach geschirmte Kabel unterstützt eine Auflösung bis Ultra HD (4K @ 60Hz) und ist abwärtskompatibel zu Full-HD 1080p.
CAT 6 lapik võrgukaabel, U/UTP Ideaalne vaipade alla või põranda põrandaliistude taha. unshielded LAN/network cable to connect network components with 2 x RJ45 connectors Low bending radius, extremly flexible, ideal to move to save space behind baseboards OD only 1.5 x 6 mm with gold plated PINs short connector type without latch protection on strain relief pair-sequence acc. to EIA/TIA 568B
RJ45 võrgukaabel CAT 6A S/FTP (PiMF), 500 MHz, CAT 7 töötlemata kaabliga, hall vaskjuht (CU), halogeenivaba kaablikest (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Meie lahendused sobivad eriti hästi kõrge eraldusvõimega pildiedastuseks sagedustel 8K @ 60 Hz ja 4K @ 120 Hz. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega topeltvarjestatud LAN-kaabel (CAT 7 600 MHz) RJ45 pistikutega (CAT 6A 500 MHz) võrgukomponentide ühendamiseks Kiire võrgukaabel spetsiaalselt kõrge eraldusvõimega pildiga (8K @ 60 Hz ja 4K @ 120 Hz) mängukonsoolidele, nagu Sony PlayStation 5 või Microsoft Xbox X S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuhe (CU) ja 50µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad Etherneti kaablit tõhusalt purunemise eest CAT 7 kaabel sobib Power over Ethernet (PoE, PoE+) ja 10 Gigabit Etherneti jaoks kiirusega kuni 10/100/1000/10000 Mbit/s
Delocki adapter on kvaliteetne lahendus nõudlike vooluühenduste jaoks. See adapter vastab standardile IEC 60320 ja pakub usaldusväärset vooluülekannet seadmetele.Tänu spetsiaalsele nurgakujundusega ja 3-poolse konfiguratsiooniga konstruktsioonile võimaldab see adapter optimaalset ruumikasutust ja sujuvat integreerimist mitmesugustesse keskkondadesse.Delocki tõestatud kvaliteet seisab vastupidavuse ja jõudluse eest. Delocki adapter on optimaalne valik vooluühenduste optimeerimiseks ja usaldusväärse toiteallika tagamiseks.Tehnilised üksikasjadÜhendused:1 x 3-poolne IEC 60320 C14 isane1 x 3-poolne IEC 60320 C13 emasliitmikVoolutugevus: max. 10 APinge: max. 250 VVärv: mustMõõtmed (LxSxK): ca. 55,6 x 20,2 x 49,8 mmPakendi sisuAdapter
