RaidSonic ICY BOX IB-HUB1701-C3 - hub - 7 ports seadme tüüp: Hub - 7 ports Subtype: USB Ports: 7 x SuperSpeed USB 3.0 Features: On/off switches Power: AC 120/230 V mõõtmed (WxDxH): 5.8 cm x 19.3 cm x 2.8 cm kaal: 213 g värv: Anthracite System Requirements: Apple MacOS, Microsoft Windows
No. of slots: 1 Accessories included: IB-1124L-C3 USB 3.0 cable (USB Type-B to USB Type-A /Type-C) Wall power adapter Manual Dimensions: 160x85x66 mm Weight: 191
Selle korraliku väikese seadmega saavad süsteemiadministraatorid füüsiliselt takistada kasutajatel ühendamast pliiatsiseadmeid, MP3-mängijaid ja muid USB-massmäluseadmeid oma arvutitega, et andmeid kopeerida, viiruseid sisse viia jne. USB-pordi blokeerija koosneb kombineeritud "võtme" ja "luku" komplektist, mis ühendatakse USB-porti. Kasutamiseks ühendage lihtsalt "klahvilukk" pessa ja vabastage riiv – lukk jääb paigale! Eemaldamiseks ühendage võti lukuga tagasi. Lihtne! Blokeerib füüsiliselt juurdepääsu USB-pordile Kiire ja lihtne kasutada Koosneb 4 lukust ja 1 võtmest Saadaval 5 erinevat värvikoodi versiooni: roosa, sinine, oranž, valge Iga võti töötab ainult sama värvi lukuga Saadaval ka 10 tk pakendis (ilma võtmeta) Garantii 2 aastat
Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
The AXAGON ADS-1PSN active USB converter easily extends your computer with a RS 232 standard serial port. The seamless compatibility of the USB - serial RS232 adapter is due to the use of an original chip from the Taiwanese company Prolific. The fixed 1.5 m long USB-A cable is suitable for use with both a desktop computer and a laptop. The cable is equipped with gold-plated connectors and contacts, the very durable body of the adapter is also suitable for industrial applications. Double shielding protects transmitted signals from adverse interference. An ideal accessory for your computer to connect barcode readers, cash register printers, scanners, microcontroller programmers, CNC machines, modems, and to upgrade or configure set-top boxes, security devices, switches, transmitters and other devices. Input: USB 480Mbps interface (USB 2.0), backward compatible with USB 1.1. Connecting USB type A male connector located on a fixed 1.5 m cable. Output: 1x serial RS-232 port with a DB9 male connector integrated in the adapters body. Transmission rate adjustable in range 75 bit/s - 1000 kbit/s. Compatible with 16C950 UART, backward compatible with 16C550, 16C650, 16C750 and 16C850. Other features: Plug and Play support. FIFO buffer sending 768B and receiving 256B. Adjustable flow control Xon/Xoff, hardware or none. Adjustable word length 4, 5, 6, 7 or 8 bits. Adjustable parity (even, odd, none, mark, space), 1, 1.5 or 2 stop bits. Adjustable usage of the FIFO buffer: receiving (1 - 14b) and sending (1 - 16b). Adjustable number of the port COM1 to COM256. Power Management support. Adapter power supply via USB (bus power) - no auxiliary power supply required. Gold-plated connectors and contacts ensure a reliable connection and, by preventing oxidation, ensure a long life of the converter. Outer cable diameter 5 mm, double shielding. Original Prolific PL2303GT chipset with integrated serial line driver is used. Adapter body dimensions 35 x 56 x 17 mm, cable length 1.5 m. Adapter weight 83 g (including cable). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. Package contains: USB - serial adapter with a 1.5 m long permanently attached USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
External USB audio adapter AXAGON ADA-12 easily and quickly adds missing headphones output or microphone input to your computer. It will also serve well as a replacement for the broken original integrated sound card in the notebook. The sound card is suitable for desktop computers and notebooks and allows you to connect headphones or active speakers and a microphone. Adapter metal housing is made of aluminum and thus provides perfect mechanical protection. Fixed cable guarantees sufficient flexibility. The sound card together with the headset will form an ideal accessory for online communication programs such as Skype, Zoom, MS Teams etc. The card is easy to install, just plug the sound card into the computer's USB port and the rest will be done automatically. Input: 1x USB 2.0 Full Speed USB port, backward compatible with USB 1.1. USB type A male connector located on a fixed 15 cm cable. Audio output: 2-channel analog 16-bit output (3.5 mm stereo jack): stereo output for headphones or active speakers. Audio input: 1-channel analog 16-bit input (3.5 mm stereo jack): mono microphone input. Sampling rate, resolution and output converter (DAC) noise: analog - 44.1 / 48 kHz @ 16 bit for playback, signal-to-noise ratio (Output SNR) 93dB, harmonic distortion (Output THD+N) -70dB. Sampling rate, resolution and input converter (ADC) noise: analog - 44.1 / 48 kHz @ 16 bit for recording, signal-to-noise ratio (Input SNR) 83dB, harmonic distortion (Input THD+N) -76dB. Other features: Easy to install thanks to full Plug and Play support. Possibility to connect your device while running thanks to the Hot Plug support. Compliant with the USB Audio Device Class specification v1.0. Adapter power supply via USB (bus power) - no auxiliary power supply required. Miniature dimensions of 29 x 29 x 12 mm, cable length 15 cm. Weight 16 g. Setting up a sound card in Windows allows: adjusting volume and balance of speakers, enhanced speaker features: Bass Boost, Virtual Surround Sound, Room Correction, Loudness Equalization, setting the sampling rate and bit depth for both reproduction and recording, setting the automatic level of gain for the microphone (Automatic Gain Control), setting the manual level of gain for the microphone. Supported OSs: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Compatible with all Internet telephony programs using the sound card. Package contains: audio adapter, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
The Axagon CRE-SM3N ID card reader is a secure helper, for example, when logging in to the internet bank and digitally signing documents. It supports ATM/CAC/ID/IC/SIS cards. The ID card reader supports Windows, Linux, macOS and Android operating systems.You can communicate with government agencies, banks, and e-service providers at home or at work without leaving your computer. You can also use an ID card to enter almost all major e-service environments in Estonia, which is the safest and most convenient way to log in. It is no longer necessary to remember different passwords and usernames for different services, an ID card, a card reader, and an ID card PIN code are sufficient.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Aktiver Adapter von HDMI zu USB Typ-C, ermöglicht 4K/8K-Wiedergabe falls nötige DisplayPort Spezifikationen fehlen, 4K mit 120Hz oder 8K mit 60Hz, geeignet für 4K/UHD- und 8K-Bildschirme
FPMA-D550SBLACK Neomounts by Newstar monitor desk stand Neomounts by Newstar FPMA-D550SBLACK full motion desk stand for 10-32" monitor screen, height adjustable - Black
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 30 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
A professional in every way The Unitek S1225A aluminium enclosure with USB 3.2 Gen2 interface allows the installation of any M.2 type PCIe (NVMe) or SATA (AHCI) memory. It is perfectly compatible with drives with heatsinks up to 12.5 mm in height. The slot fits M key and M+B key drives with different lengths: 42 mm, 60 mm or 80 mm. At lightning speed The enclosure provides data transfer speeds of up to 10Gbps. It works with UASP (USB Attached SCSI Protocol) technology and the TRIM (ATA Data Set Management Command) instruction. With UASP, the USB device can establish a command sequence and execute several commands simultaneously. This increases read transfers as well as write transfers by approximately 30 per cent compared to traditional USB devices. TRIM tells the SSD which data blocks are unused and allows them to be refilled with data. This improves performance and extends the life of the drive. Robust armour The case will not only protect the drive from external damage, but also conducts heat brilliantly due to the high quality of the material, the included thermal pads as well as the clever design with aluminium fins. Its compact size means that it can even be stored in a small ladies' handbag. An Autosleep mode is also included to conserve battery power, and starts after 30 minutes of inactivity. The drive slot is ejectable and includes a safety catch to prevent accidental ejection. The included flat cable is robust and will last for years. Quality guaranteed All Unitek products in Poland are covered by a three-year distributor warranty. To activate it, register your purchase via the Unitek Search app (available on iOS and Android). Key features: USB 3.2 Gen2 10Gbps standard with backward compatibility Compatible with PCIe (NVMe) or SATA (AHCI) drives UASP and TRIM Autosleep mode Heat dissipation design
RAID enclosure for 2x HDD/SSD USB 3.2 Gen 2 Type-C / Type-A interface IB-RD2253-C31 RAID Enclosure with four modes: The IB-RD2253-C31 is equipped with four RAID modes in total. You can use RAID 1 for improved data security or RAID 0 for better performance, as well as SINGLE and LARGE modes for special use cases. Compact yet spacious: With space for two 2.5" SATA SSD drives, the IB-RD2253-C31 offers exceptional storage capacity at an uncompromisingly small enclosure size, making this compact RAID enclosure ideal for the mobile use. Completely silent: The enclosure operates completely silent because of the fanless design. Due to the efficient heat dissipation properties of the aluminium casing, your drives remain at an optimal temperature. Data transfer at top speed: With USB 3.2 Gen 2 you benefit from data transfer rates of up to 10 Gbit/s. Data of almost any size is transferred to the drives within seconds and can be retrieved just as quickly. Plug & Play: Just plug in and get started: Once the drives are mounted in the enclosure, you can connect the IB-RD2253-C31 to your computer and start using it straight away. No additional software necessary.
The Gembird DD-U3M2 SSD docking station offers a streamlined way to connect M.2 drives to your computer. With its USB-C to USB-A cable and accompanying dongle, this docking station ensures compatibility with various devices while maintaining a tidy setup. Designed for hot-swap capabilities, it allows users to easily access their SSDs without needing to power down, providing flexibility in data management.Featuring a data transfer rate of 10 Gbit/s, the DD-U3M2 enhances productivity with rapid file transfers. The inclusion of UASP transfer protocol and TRIM support further optimizes performance, making this docking station a valuable addition to any workflow. With compliance to several standards including ISO 9002 and RoHS, it upholds quality and environmental safety.
The AK-66 2.5" HDD / SSD enclosure is a device that provides reliable protection for the drives that store your data. With a transfer speed of 5 Gbps, you can enjoy fast and smooth file transfers. Hassle-free compatibility Compatibility with Windows, macOS and Linux means that you can easily use this device on any computer, without having to install additional drivers. The enclosure is compatible with 2.5" HDD/SSD with a height of 7 or 9.5mm, giving you the flexibility to choose your media. Security and convenience The enclosure can be easily stored in a wide temperature range, from -20C to 50C. so you do not have to worry about the safety of your data even in adverse conditions. Thanks to its compact dimensions of 126 × 79 × 13 mm, it is convenient to carry, yet spacious enough to accommodate a drive. Technical specification: Interface: USB 3.0 SuperSpeed (up to 5 Gbps) Drive type: HDD / SSD 2.5 with a height of 7 or 9.5 mm Data transfer rate up to 5 Gbps Input voltage: 5 V Storage temperature: -20C 50C Dimensions: 126 × 79 × 13 mm Weight: 54 g Colour: black Compatible with: Windows XP / Vista / 7 / 8 / 10 / 11, MacOS, Linux
IB-1919M-C42 M.2 NVMe Enclosure via USB4 High-Speed Performance with USB4: Experience data transfer speeds of up to 40 Gbit/s with the IB-1919M-C42, perfect for transferring large files, editing high-resolution videos, and accessing complex datasets with ease. Toolless Installation: Enjoy effortless setup with a toolless design, allowing you to quickly install your M.2 NVMe SSD without any tools. Just slide your SSD in, secure it, and connectit's that easy! Robust Aluminium Housing: The premium aluminum construction offers excellent durability and protection for your SSD, while effectively dissipating heat to maintain optimal performance during extended use. Wide Variety of SSD Compatibility: Designed to accommodate 22x 30/42/60/80 mm SSDs, this enclosure ensures versatility and secure fit for various sizes without needing multiple enclosures. Multi-OS Compatibility: Provides consistent performance with Windows and macOS, making it a reliable solution for connecting different M.2 NVMe SSDs across platforms. Connect to PC via USB4 Type-C: Includes two cablesone for PC connection and one for powerproviding convenience and versatility for your setup.
VSM653 double swivel wall arm for 49-65 inch screens The VSM653 double swivel wall arm is dedicated to larger screens with a diagonal of 49 to 65. The design is adapted to frequent changes in monitor position, so it is an ideal solution for places where monitors often change their position. This holder is made of aluminum arms with cables inside, which ensures tidy installation and aesthetic appearance. VSM653 allows you to rotate the screen right and left by 90° and tilt the screen by +11°, which allows you to adjust the screen position to the user's expectations and increases the comfort of use.
The Gembird Cablexpert Premium 1.5M USB-C Cable offers reliable connectivity for devices requiring fast charging and data transfer. Capable of delivering up to 60 W at 3 A, this cable is ideal for power-hungry devices, ensuring they remain charged while in use. The flexible silicone jacket provides durability and protection against wear and tear, making it suitable for both home and travel use.With a data transfer rate of 480 Mbps, the Cablexpert Premium cable allows quick file transfers, keeping productivity levels high. Its molded design ensures longevity, providing a stable connection with both male-to-male USB-C connectors, making it compatible with most modern devices. This cable is a choice for those who need efficiency and reliability in their charging and data transfer needs.
The Neomounts by Newstar FPMA-D550DD3BLACK is a full motion desk stand for three flat screens up to 27" with a maximum weight capacity of 7 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Additionally, the mount features height adjustment (0-43,2 cm), to create the perfect work situation. The smart cable management clips ensure orderly routing of the cables. Additionally, the mount features an Easy-release VESA, that allows you to (de)attach the monitors in a wink of an eye. The FPMA-D550DD3BLACK is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Deviant hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates.
The Neomounts DS70-450BL1 NEXT Core is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450BL wall adapter is optionally available.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The DIGITUS DA-73109 USB extension cable enhances connectivity and data transfer rates for devices. Featuring double shielded technology, this cable ensures reliable performance in demanding environments. With USB 3.0/ USB 3.1 compliance, it supports data rates of up to 5 Gbps, allowing for efficient and fast data transfer. The male 24-pin USB-C connector on one end and the female 24-pin USB-C connector on the other provide versatility in connecting various devices.
Docking station 8 in 1 GIGA LAN HUB MT5046 Multifunctionality at your fingertips The Media-Tech MT5046 docking station is a true command center for your computer. With 8 built-in ports, you can connect virtually any device you need for work or entertainment. This is the perfect solution for those who value convenience and versatility. Superfast data transfer Particularly noteworthy is the RJ45 port that allows transfer speeds of up to 1000Mbps! Equipped with a USB-A 3.0 port, the hub allows you to transfer files in no time. Speeds of up to 5 Gbps will make even the largest files transfer in the blink of an eye. Forget about the long wait for data transfer. Powerful power without compromise With a USB-C PD port with up to 100W of power, you can charge your devices without any hassle. Whether it's a laptop, tablet or smartphone, the hub will provide enough power to keep your devices up and running. Reliable LAN The integrated RJ45 Gigabit LAN socket guarantees a stable and fast connection to the Internet. Ideal for those who need a reliable network for remote work, online gaming, or transferring large files. 4K picture quality The HDMI port supporting 4K resolution allows you to connect a monitor or TV and enjoy crystal clear images. Watch movies, play games and work on the big screen without compromising on quality. Quick access to memory cards SD and microSD card readers are ideal for photographers, filmmakers and anyone who frequently uses memory cards. Fast data transfer makes it easy to manage files and photos. Elegant and durable design The MT5046 Hub is enclosed in a sleek aluminum housing. Not only does it look good, but it is also resistant to damage, ensuring long-lasting use. The lightweight design (60g) means you can take it with you anywhere. Universal compatibility The device is compatible with Mac OS 10.x, as well as Windows 10 and 11. No matter what operating system you use, the Media-Tech MT5046 hub will work flawlessly, providing you with full capabilities in any working environment.
The Club 3D CAC-2530 USB-C to RJ-45 network adapter provides a reliable solution for seamless wired connectivity. With a compact integrated design and a 12 cm cable length, this adapter is perfect for on-the-go use, ensuring fast and efficient network connections. Supporting a variety of data link protocols including Gigabit and 5 Gigabit Ethernet, this adapter offers data transfer rates of up to 5 Gbps, making it suitable for high-speed networking requirements. This network adapter features essential capabilities such as Wake On LAN (WOL), VLAN support, and Jumbo Frames support, enhancing its functionality for diverse networking scenarios. Built with compliance to FCC, RoHS, and EMI standards, it allows for safe and sustainable use. The Club 3D CAC-2530 is USB-powered for convenience and includes USB Pass-Through functionality, making it a versatile tool for connecting multiple devices. Experience a solid wired connection with this efficient and compact network adapter.
