Dimensions: 90x130x230 mm Weight: 0.27 Accessories included: 1 x power supply, 1x USB Type-C to Type-Ccable, 1x USB Type-C to Type-A cable, 1x screw set, 1x screwdriver, 1x stand, 1x manual
3-meetrine USB 3.2 Gen 2 aktiivkaabel andmete ja video pikendamiseks Andmeedastuskiirused kuni 10 Gbps Toetab DisplayPort 1.4 alternatiivset režiimi Toetab videoresolutsioone kuni UHD 8K 7680x4320@60Hz, sealhulgas 4K 4096x2160@120Hz 2-aastane garantii Aktiivsed USB-kaablid võimaldavad kasutajatel pikendada ühenduskaugust kahe USB-seadme vahel. Need kaablid on varustatud integreeritud aktiivse elektroonikaga, mis võimendab signaali kiireks andmeedastuseks. Lindy USB 3.2 Gen 2 aktiivkaabel kasutab sisseehitatud aktiivelektroonikat, et pikendada USB 3.2 seadme kaabli pikkust täiendavalt 3 m võrra, toetades samal ajal jätkuvalt kiiret ja tõhusat andmeedastuskiirust kuni 10 Gbps ning Displayport 1.4 Alternate Mode'i. See ühendab andmed, video ja USB Power Delivery ühes kaablis, mis muudab selle suurepäraseks lahenduseks kaasaegsetes koosolekuruumides ja klassiruumides LFD-de ja puutepaneelide ühendamiseks. DP 1.4 signaalide saatmisel saab toetada ainult USB 2.0 kuni 480Mbps. USB 3.2 Gen 2 andmesidekiirusega kuni 10 Gbps on võimalik saavutada DP 1.2 signaalide saatmisel kuni 4K 60 Hz resolutsiooniga. Kaabel toetab ka Power Delivery'i kuni 60W (20V / 3A). See on ühilduv USB 3.2 Type C ja Thunderbolt 3-ga varustatud arvutitega, seega on see ideaalne pikendusvahend uusimatele sülearvutitele, Macbookidele ja Type C arvutitele. Tänu plug and play-funktsioonile saab seda pikenduskaablit paigaldada kiiresti ja minimaalse vaevaga. Teave USB 3.0, 3.1 ja 3.2 kohta USB 3.0, USB 3.1 ja USB 3.2 arvutid, kaablid ja seadmed ühilduvad omavahel, kui kasutatakse kas USB Type A või USB Type C hostiliidest. USB 3.0, USB 3.1 Gen 1 ja USB 3.2 Gen 1 toetavad kõik andmeedastuskiirust kuni 5 Gbps. USB 3.1 Gen 2 ja USB 3.2 Gen 2 toetavad mõlemad andmeedastuskiirust kuni 10 Gbit/s.
Suure jõudlusega aktiivne kaabel, mis tagab pikendatud 10 m ühenduse arvuti ja USB 3.0 seadme vahel Saab kasutada eraldiseisvana või osana Lindy Active Extension System Pro-st, et luua kohandatud pikendussüsteeme üle 40 m (sõltuvalt kasutatavatest kaablikonfiguratsioonidest) Toetab täielikku USB 3.0 SuperSpeed ribalaiust kiirusega 5Gbps Lihtne kasutada - ühendab seadme olemasoleva USB-kaabliga (maksimaalselt 5 meetrit) 2-aastane garantii
Professionaalne valik USB 2.0 tüüp A - B kaabel äri- ja kõrgtehnoloogiliste AV- ja IT-seadmetele Toetab andmeedastuskiirusi kuni 480Mbps Tugev PVC-korpus, nikliühendused ja kullatud kontaktid Kahekordne varjestatud kaabel, korrosioonikindlad vaskjuhtmed
Kuvab HDMI-signaalid 4 ekraanil üheaegselt ühest allikaseadmest Toetab kuni 4K 60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. Väljavõte digitaalsest ja analoogheli HDMI-st mitte-HDMI võimendite jaoks Omab korralikku lülitit 4K-st 1080p-ni alandamiseks 2-aastane garantii Lindy 4 Port HDMI 2.0 18G Splitter koos heliga on multifunktsionaalne lahendus kvaliteetsete HDMI-signaalide jaotamiseks 4 ekraanile samaaegselt ühest allikaseadmest, eraldades samal ajal eraldi digitaalse või analoogheli. Toetades kuni 4K 60Hz 4:4:4 8bit resolutsiooni, sobib see jaotur suurepäraselt silmatorkavate nelja ekraani digitaalsete siltide loomiseks jaemüügistsenaariumides, spordi näitamiseks mitmel ekraanil spordibaarides või huvitavate mitme ekraani hariduslike esitluste levitamiseks messidel. Jaoturil on ka eraldi optilised ja 3,5 mm audiopordid, mis võimaldavad hõlpsasti HDMI-st heli eraldada, et ühendada mitte-HDMI võimendid või helibaarid, mis on ideaalsed videote toetamiseks koos kaasahaarava mitmekanalilise heliga. Jaoturitel on ka integreeritud lüliti, et vähendada sisendsignaali Full HD-signaaliks, mis muudab vanemate kuvarite paigaldamise muretuteks, tagades samal ajal, et vaataja saab oma kuvarilt alati optimaalse pildi.
USB 3.1 Tüüp C-A kaabel on mõeldud ühendamaks seadmeid nii kodus kui ka väikestes kontorites Toetab SuperSpeed+ andmeedastuskiirust kuni 10 Gbps Tugev PVC korpus, nikliühendused, kullatud kontaktid Kolmekordne varjestatud kaabel, korrosioonikindlad vaskjuhtmed Black Line USB 3.1 Tüüp C kaablid on saadaval pikkusega 0,5m, 1m ja 1,5m
juhib nelja HDMI-ga varustatud arvutit ühe klaviatuuri, hiire ja monitori abil Lülitamine seadme surunupu või klaviatuuri kiirklahvide abil Toetab HDMI 18G resolutsiooni kuni 4K@60Hz 4:4:4 koos HDR-iga 3,5 mm stereoheli pordid mikrofoni, kõlarite või kõrvaklappide ühendamiseks 2-aastane garantii KVM-lüliti võimaldab operaatoril mugavalt juhtida ja hallata mitut seadet, näiteks arvutit ja serverit, ühe klaviatuuri, hiire ja ekraanikonsooliga. Lindy 4 Port HDMI 4K60, USB 2.0 & Audio KVM Switch on kompaktne lahendus, mis võimaldab juurdepääsu ja kontrolli neljale HDMI-ga varustatud arvutile ühe klaviatuuri, hiire ja monitori seadmestiku kaudu. Kuni 4K Ultra HD 60 Hz resolutsioonide tugi tagab kõrgeima pildikvaliteedi, mis sobib ideaalselt nõudliku graafilise sisu jaoks mängukomplektides, videotöötluses või nelja süsteemi juhtimispunktides. Täiendav toetus High-Dynamic Range'ile tagab, et videosisu on nähtav suurema heleduse, suurema kontrasti ja palju laiema värvigammaga. Peaseadme heliväljundipordid võimaldavad kasutajatel ühendada ka kõrvaklapid või kõlarid, et lisada immersiivne 2CH-heli ja mikrofon; esipaneelil asuva Audio On/Off-nupu vajutamine lülitab need seadmed välja. Need pordid ei ole ühendatud HDMI-signaaliga, vaid sisseehitatud USB-muunduriga, samas kui täiendavat USB-seadet, näiteks printerit, skannerit või kõvaketast saab ühendada esipaneelil asuvasse täiendavasse USB-porti. KVM-lülitil on kaks lülitusvõimalust, sealhulgas seadme surunupud ja klaviatuuri kiirklahvid, mis pakuvad kasutajale lihtsat ja usaldusväärset juhtimist, mis sobib suurepäraselt nii professionaalsetele kui ka esmakasutajatele.
Laiendab 4K HDMI 18G signaale üle 50 m kaugusele standardse võrgukaabliga Toetab kuni 3840x2160@60Hz 4:4:4 8bit resolutsiooni, HDR-i toetusega HDMI-läbivooluväljund loob täiendava vaatetsooni koos lokaalse ekraaniga PoC (Power over Cat.6) funktsionaalsus, mis tagab toite ühest toiteallikast. 2-aastane garantii Lindy Cat.6 HDMI 18G & IR Extender koos PoC-ga on tõhus ja usaldusväärne lahendus kvaliteetse 4K HDMI-signaali laiendamiseks kuni 50 m (164.04ft) kaugusele standardse Cat.5e/6 võrgukaabli abil. HDMI 2.0 18G spetsifikatsiooni tugi võimaldab edastada väga üksikasjalikke 4K Ultra HD resolutsioonide andmeid. Tänu High-Dynamic Range'i toetusele on videosisu vaadatav suurema heleduse, suurema mustade ja valgete kontrasti ning palju laiema värvigammaga, mis sobib ideaalselt tõelise kodukinoelamuse või silmatorkava digitaalse reklaami jaoks jaekeskkondades. HDCP 2.2 vastavus võimaldab 4K-videosisu, mis pärineb kopeerimisega kaitstud allikatest, näiteks Blu-Ray-filmidest, meediamängijatest ja voogedastusteenustest, vaadata ilma ühilduvusprobleemideta. Kadudeta audioformaatide, sealhulgas DolbyTrueHD ja DTS-HD toetus lisab videosisule võimsa mitmekanalilise heli, pakkudes vaatajale täiustatud elamust ja realistlikkuse tunnet. Extenderil on saatja HDMI-läbipääs, mis võimaldab samaaegset vaatamist kohalike ja kaugkuvarite abil. Selline mitmekülgsus pakub sobivat lahendust kasutamiseks erinevates stsenaariumides, näiteks hariduslikes esitlussüsteemides, kodukinos, meelelahutussüsteemides või messidel. Sisseehitatud EDID dip switch võimaldab kasutajal kontrollida, millist EDID-d võetakse kummaltki kuvarilt, muutes paigaldamise ja konfigureerimise lihtsaks, tagades maksimaalse ühilduvuse HDMI kuvarite ja projektoritega. PoC võimaldab nii toite- kui ka andmesignaalide edastamist üle Cat.6 kaabli punktist-punkti konfiguratsioonis, mis lisab paindlikkust, kuna nii saatja kui ka vastuvõtja jaoks on vaja ainult ühte toiteallikat. Ideaalne juhul, kui toitepunktid on piiratud. Tänu IR-läbipääsule saab allikaseadmeid ühilduvate infrapunapuldi abil tõrgeteta juhtida paigalduse kaugkuvarite poolelt, kasutades ühilduvaid infrapunapuldisidemeid. See tagab kasutajale lihtsa ja täieliku kontrolli. Pange tähele: See toode ei ole mõeldud kasutamiseks koos aktiivsete võrguseadmetega ja seda tohib kasutada ainult punkt-punkt ühenduses.
Suure jõudlusega aktiivne kaabel, mis tagab pikendatud 15 m ühenduse arvuti ja USB 3.0 seadme vahel Saab kasutada eraldiseisvana või osana Lindy Active Extension System Pro-st, et luua kohandatud pikendussüsteeme üle 40 m (sõltuvalt kasutatavatest kaablikonfiguratsioonidest) Toetab täielikku USB 3.0 SuperSpeed ribalaiust kiirusega 5Gbps Lihtne kasutada - ühendab seadme olemasoleva USB-kaabliga (maksimaalselt 5 meetrit) 2-aastane garantii
DST-Pro 5K XT, USB-C Laptop Docking Station with Triple Display (4K) or Single Display (5K) & 100W Pass-Through 5K DP, HDMI, PD 3.0 100W, USB 3.2 Gen 1, Gigabit, SD, MicroSD, Audio - Connects an HDMI and/or up to 2 DisplayPort displays, USB peripherals, Gigabit Ethernet, an Audio device, an SD card and power over a single cable - Supports 5K 60Hz for a single DisplayPort display or 4K 60Hz for a single HDMI display - Integrates 4 port USB SuperSpeed 5Gbps Hub (3 x Type A, 1 x Type C) - Allows USB Power Delivery up to 100W to charge the laptop while using the DST-Pro 5k XT Dimensions 180x77x18mm Weight 0.439 kg
Efektiivne suruõhk raskesti ligipääsevatele detailidele sobib kasutamiseks sülearvutite, klaviaturide, printerite, foto- ja videoseadmete puhastamisel. Toode on HFC vaba.
With the Thunderbolt 3 protocol, PCI Express, DisplayPort and host-to-host transmissions can be implemented. With this cable, you can transmit audio/video signals, data, and also provide power. The data transfer rate is 5 Gbit/s. so you can transfer large files like movies and music in just a few seconds. Video signals are transmitted with up to 4K resolution and 60Hz refresh rate. Support for USB Power Delivery technology allows you to use the charging function. With the right charger, mobile devices can be quickly charged with a maximum power of 60 W (3 A / 20 V). The USB Type-C interface ensures broad compatibility with devices with this connector. Supports data transfer rates up to 5 Gbit/s Supports USB Power Delivery with 20V, 3A and 60W Backwards compatible with Thunderbolt 3 and USB 2.0 Support for transmitting DisplayPort audio/video signals over PCi Express Supports audio/video resolutions up to 4K @ 60 Hz Aluminum housing
AXAGON PCEU-43RS PCI-Express card adds four external USB 3.2 Gen 1 ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four SuperSpeed USB ports are taken out to the bracket. The dual power supply of the controller enables standard power supply of the controller and connected USB peripherals via the PCI-Express bus as well as optional power supply from the PC power supply via the SATA power connector. The USB controller is equipped with a renowned Renesas company chipset with proven seamless compatibility, high performance and UASP support. Low profile bracket is included in the package for mounting the adapter into low profile cases. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1 / 3.0. Number of lines: 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus is 5 Gb/s. Output: 4x external USB 3.2 Gen 1 port with USB type A-F connectors. SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 a USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s (super / high / full / low speed). When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Standard power supply for the controller and connected USB peripherals via the PCI-Express bus. In this power supply mode, the PCIe controller can handle up to three magnetic 2.5" external disks simultaneously. Optional power supply from PC source via SATA power connector. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10 / 11, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express controller with a standard bracket, low-profile bracket multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Specification:Processor 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographyextensions, 512KB per-core L2 caches, and a 2MB shared L3 cacheFeatures:• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2• Dual 4Kp60 HDMI® display output with HDR support• 4Kp60 HEVC decoder• 4GB LPDDR4X-4267 SDRAM• Dual-band 802.11ac Wi-Fi®• Bluetooth 5.0 / Bluetooth Low Energy (BLE)• microSD card slot, with support for high-speed SDR104 mode• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation• 2 × USB 2.0 ports• Gigabit Ethernet, with PoE+ support(requires separate PoE+ HAT)• 2 × 4-lane MIPI camera/display transceivers• PCIe 2.0 x1 interface for fast peripherals(requires separate M.2 HAT or other adapter)• 5V/5A DC power via USB-C, with Power Delivery support• Raspberry Pi standard 40-pin header• Real-time clock (RTC), powered from external battery• Power button
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM15AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 1.5 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
4-port USB 3.1 (Gen 1) Type-C hub YOUR GATEWAY TO USB WORLD USB 3.1 ultra-high data transfer speed up to 5 Gbps Powered hub: perfect for peripherals that need more power Suitable for USB Type-C OTG devices and PC Windows 11 compatible
FPMA-D750BLACK2 Neomounts by Newstar monitor desk mount Neomounts by Newstar Full Motion Desk Mount (clamp & grommet) for 10-32" Monitor Screen, Height Adjustable (gas spring) - Black
The DIGITUS repeater is a solution for extending DisplayPort signals over long distances without compromising on visual quality. Capable of supporting 8K resolution at a 30 Hz V-Sync rate, it delivers clear images and vibrant colors, making it perfect for a variety of applications, from professional graphic design to immersive gaming experiences. Its robust aluminum housing and USB-powered design offer both durability and convenience, ensuring that your setup remains streamlined and efficient. With compliance to DisplayPort 1.4 standards, this repeater is compatible with a broad range of devices, while its HDR support enhances the dynamic range of your visuals. Whether you're looking to extend your display across different rooms or simply aiming to upgrade your digital workspace, the DIGITUS repeater offers a reliable and high-quality solution.
Active Optical (AOC) Ultra High speed HDMI cable with Ethernet "AOC Premium Series", 30 m HDMI Active Optical Cables (AOC) use fiber optic technology to transport the digital HDMI signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. HDMI AOC cables also have dedicated copper power wires inside, so no external power supply is required. HDMI AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality braided cable with stylish metal connectors Smaller cable diameter compared to traditional copper HDMI cables Supports 8K UHD resolutions at 60Hz
The Neomounts by Newstar DS70-450WH1 is a full motion desk mount for one flat screen up to 42" with a maximum weight capacity of 15 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (0-51,4 cm), to create the perfect working position. The DS70-450WH1 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70-450WH1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
Professional Series Freestanding Dual Horizontal Monitor Arm - Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount - Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain - Low profile, weighted base provides enhanced stability - Minimize clutter with the intuitive cord management system - Holds 27” monitors up to 17.6 lbs. - Meets VESA mounting standards
Adjustable wall-mounted monitor arm for 3 monitors Set your screen perfectly Lightweight and tiltable design Monitor wall mount with single arm for 3 monitors The arm rotates, extends and retracts, and tilts to change the reading angle Monitor mounting strip for mounting 3 monitors side by side Allows easy, ergonomic positioning to reduce workload Works with almost any LCD monitor (max. 27") Durable, adjustable gas spring suitable for monitors weighing 16 kg Built-in cable management keeps your workspace organized and tidy
Edbak FSM100. Paigaldus: Kruvid, Maksimaalne kaal (mahutavus): 15 kg, Ekraani minimaalne suurus: 81,3 cm (32"), Ekraani maksimaalne suurus: 139,7 cm (55"), Paigaldussüsteemi ühilduvus (min): 75 x 75 mm, Paigaldussüsteemi ...
The DIGITUS DA-71156 storage enclosure offers a reliable solution for expanding storage capacity with support for M.2 SSDs. Utilizing a compact design with a length of 25 cm, this external enclosure is crafted from aluminum, ensuring durability and efficient heat dissipation. With a data transfer rate of up to 10 Gbps for NVMe drives and 6 Gbps for SATA drives, it efficiently handles large files while maintaining optimal performance. An LED indicator provides visual feedback on operational status, making it user-friendly.
The DIGITUS USB-C to USB-C cable is designed to enhance your data transfer capabilities with a 40 Gbps speed. Measuring 25 cm in length, this external storage enclosure is perfect for M.2 solid state drives, providing a toolless experience for easy accessibility. Crafted from aluminum, the enclosure ensures durability while effectively dissipating heat during operations. With a built-in cooling fan and a clear LED indicator, users can monitor performance effortlessly. This solution is compliant with Plug-and-Play standards, making setup straightforward, and it supports up to 8 TB capacity for extensive storage needs. Operable in a wide range of temperatures from 5 °C to 50 °C, it is suitable for various environments, ensuring reliable performance under diverse conditions.
Adjustable desk mounted double monitor arm, 17”-32” Position your screen perfectly Lightweight and tilting design Monitor desk mount with double monitor arm Arms allow to swivel, extend, retract or tilt your display and enables rotating the displays from landscape-to-portrait mode, etc Works with almost any LCD monitor (max. 32") Separate arms allow aligned mounting of monitors of different size/brands Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
Monitor mount 17-45 inches 16kg gas spring Maclean monitor mount, computer screen holder, double arm, with gas spring, 17"-45", 16 kg, MC-969 Universal LCD or LED monitor mount with the possibility of mounting to a desk top or in a cable hole. The mount is designed for monitors with a screen diagonal from 17" to 45" and a maximum weight of up to 16 kg. The MC-969 mount provides great working comfort, optimizes ergonomics and visibility by adjusting the angle of tilt, rotation, height, etc. This allows you to adjust the position of the monitor fully to your workstation. The mount will easily attach the screen in VESA standard: 75x75, 100x100 mm. The mount is compatible with LED, LCD, OLED monitors of such brands as Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, iiyama, Acer, Gigabyte. The mount is equipped with a gas spring for infinite height adjustment of the monitor. This makes it easy to adjust the position of the monitor to your preference, raising or lowering it in just a few seconds. The mount is made of durable materials that guarantee the stability and safety of the monitor. The solid construction allows you to place monitors up to 45" without worrying about their safety. The modern and neat design of the mount makes it blend in well with most office or home interiors. The MC-969 mount is easy to install and can be attached to a desk top or in a cable hole. All the necessary mounting hardware is included. Cable grommets help to guide cables in an orderly manner. This reduces clutter on your desk, resulting in a neater look and a more organized workspace.
The Neomounts Select desk mount, model NM-D750DWHITE is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 32?. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. Neomounts Selects? unique tilt (180°), rotate (180°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable from 17 to 51 centimetres using a gas spring. Depth adjustable from 0 to 61 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. Neomounts Select NM-D750DWHITE has three pivot points and is suitable for screens up to 32" (82 cm). The weight capacity of this product is 9 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts Select VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 32" - Desk mount: Desk clamp & grommet - Depth: 0-61 cm - Height: 17-51 cm - Tilt: 180° - Rotation: 180° - Swivel: 180°
Chatting with your besties, streaming in the evening, sitcoms, and chill... You set the action plan and the ENDORFY Atlas Single keeps the screen. And it handles it pretty well - with a load capacity of 8 kg, it's not afraid of even larger, 27-inch screens. The ENDORFY Atlas Single is compatible with 75 × 75 mm and 100 × 100 mm VESA standards. You can also easily adjust the height of the screen, rotate it left or right (from -90° to +90°), and tilt it up or down (from -35° to +35°). Mounting the whole thing takes just a few seconds - just screw the clamp onto the desk and you're done. Your ENDORFY Atlas Single is ready for action.
