The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
Slim metal USB-C 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMC-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5 Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones with UCB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9 +, can be connected to the Internet with a network Ethernet cable thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB-C multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The DUB-M530 5-in-1 USB-C hub with HDMI and SD/microSD card reader allows you to instantly add an HDMI display, SD card reader, and two additional USB 3.0 ports to your computer.
The Neomounts DS70PLUS-450BL1 NEXT Core is a full motion desk mount for curved ultra-wide screens up to 49". The mount features a strengthened head specifically designed for curved ultra-wide screens and to support a higher maximum weight up to 18 kg (curved 14 kg). The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (5,4-49,7 cm), to create the perfect working position. The DS70PLUS-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70PLUS-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
The Neomounts DS70S-950BL1 NEXT One is a full motion desk mount for screens up to 49". The DS70S-950BL1 is a true all-in one solution for small to large displays. The NEXT One features a strengthened head specifically designed to also support curved ultra-wide screens and features a higher maximum weight capacity up to 18 kg (curved 15 kg). The versatile tilt (180°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (20-52 cm) and depth adjustment (8,8-62,5 cm), to create the perfect working position. The DS70S-950BL1 features the nifty 180° stop mechanism, that prevents the mount from making contact with the wall or separation panel when installed near it. The smart cable management system ensures orderly routing of the cables. The black VESA plate of the NEXT One integrate stylishly with the black back of your screen. The DS70S-950BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various optional VESA adapter plates available. The monitor arm is equipped with a Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
The Neomounts DS20-425BL2 NEXT Lite is a full motion desk mount for screens up to 27" and laptops up to 17,3" with a maximum weight capacity of respectively 8 and 5 kg. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal height and viewing angle for your screen and laptop. Additionally, the mount has manual height and depth adjustment to create the perfect working position.Due to the short T-Rex upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screens to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS20-425BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS20-425BL2 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.The packaging of the NEXT Lite is 100% plastic free and entirely made from cardboard and paper.
FEATURES High-Definition Multimedia Interface (HDMI) digital audio/video interface cable Supports data transfer bandwidth of up to 10 Gigabits/sec Allows bi-directional communication between smart HDMI devices Supports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 Hz Supports HDMI Ethernet Channel 100 Mbps function (HEC) Supports Audio Return Channel technology (HARC
Impress 100 Micron thickness - offering an everyday level of document protection, Ideal for notices, craft materials, signage and frequently handled documents, Gloss finish in A3 size, Pack size of 100, Compatible with all ...
Impress 100 Micron thickness - offering an everyday level of document protection, Ideal for notices, craft materials, signage and frequently handled documents, Gloss finish in A4 size, Pack size of 100, Compatible with all ...
Length 1.8 m Product Type Cables Length 1,8 m Shipping box quantity 200 Unit Brutto Volume 0,0001379 cubm Unit Net Weight 0,078 kg Unit Gross Weight 0,083 kg
Design for 60″ – 75″ screensWide range of VESA mounting holes up to 800×400Robust design provides a load capacity up to 80 kgSafety screws to prevent the screen from accidentally fallingQuick and easy screen installation in 3 stepsScreen mounting screws included
NewStar flat screen desk mount NewStar NM-D775BLACKPLUS Full Motion Desk Mount (clamp & grommet) for 10-49" Monitor Screens, Height Adjustable (gas spring) - Black The NewStar NM-D775BLACKPLUS is a tilt-, swivel and rotatable desk mount for flat screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars' unique tilt (90°), rotate (180°) and swivel (180°/360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 59 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775BLACKPLUS has three pivot points and is suitable for screens up to 49" (124 cm). The weight capacity of this product is 1 to 18 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
Adapter from USB to HDMI + VGA, grey Easily connect your computer to a VGA or HDMI monitor Add extra monitors to your computer USB 3.0 to HDMI and VGA video adapter cable Supports 4K resolutions at 30Hz for HDMI and VGA up to 1080p at 60Hz Allows easy mirroring or expansion of your computer image No external power supply required Built-in drivers for quick and easy installation
DisplayPort -> HDMI active cable - adapter AXAGON RVD-HI14C2 to connect HDMI monitor/TV/projector to the computer with the DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. It is an ideal solution - you don't need a HDMI cable and converter. With this active cable everything is integrated into one compact unit. The cable is only one-way, i.e. DisplayPort to HDMI, not otherwise. Input: DisplayPort v1.2 DP male connector with latch (M) connector latch control button Output: HDMI v1.4b HDMI A (M) male connector Supported resolutions:Resolution and frequency depend on monitor and graphics adapter. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection / disconnection of the device while running HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 1.8 m weight only 70 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by a cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDMI cable length 1.8 m, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Monitor stand for 2 monitors (long rectangle) - Position your screen perfectly to reduce neck and eye strain - Monitor/laptop stand - Extra long design provides enough room for 2 monitors - Rectangle shaped design, fits perfectly on any desk
Original part number CCA-421S-5M Product name Gembird audio cable JACK 3.5mm M/JACK 3.5mm F 5M, gold Producer Gembird Class of product Cables - SCART | S-Video | Toslink | RCA | JACK Basic information Basic information Cable type audio Jack plugs 1x male Jack 3,5mm stereo1x female Jack 3,5mm stereo Cable length 5 m Other information Other information Gold plated plugs Yes Cable colour Black
Original part number PC-189 Product name Gembird power extension cable 6ft Producer Gembird Class of product Cables - others Wire type Power Cable Plug 1 type IEC320 C13 Plug 2 type IEC320 C14 Colour Black Length 1.8 m
This NewStar CPU mount, model CPU-D075BLACK, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn’t use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor.This NewStar CPU mount allows vertical installation of computers. Hide your cables and keep the workplace nice and tidy.Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount.All installation material is included with the product.TüüpDesk-mountedMaksimaalne kaal (mahutavus)10 kgToote värvMustMaterjalMetallLaiuse reguleerimise ulatus50 - 100 mmKõrguse reguleerimise ulatus200 - 360 mm
Tootegrupp: kaablid - SATA plugs: 2x male SATA 7-pin kaabli pikkus: 0.5 m kullatud pistikud: Ei kaabli värvus: punane Lisaandmed: Metal clips, SATA III 6 Gb/s, One ühenduspesa 90 degree bent
Screen size (max): 27 Load (max): 24 Vertical adjustment: 45 Horizontal adjustment: 45 Dimensions: 630 x 140 x 310 mm Weight: 6.6 Other features: - Pivot: 360°- Integrated cable management system- Max weight on the frame: 8 kg
Functions: HDD capacity unlimited Plug & Play and HotSwap Dimensions: 203 x 30 x 115 mm Weight: 0.27 Accessories included: IB-377-C31 Power adapter Type-C to Type-C cable Manual Stand Other features: Interface to PC: USB 3.1 Type-C, UASP, up to 10 Gbit/s
NewStar flat screen desk mount Newstar Full Motion Desk Mount (clamp) for two 17-49" Monitor Screens - Black The NewStar desk mount, model FPMA-D960DVBLACKPLUS is a tilt-, swivel and rotatable desk mount for two screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp. NewStar's versatile tilt (180°), rotate (360°) and swivel (160°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar FPMA-D960DVBLACKPLUS is suitable for screens up to 49" (124 cm). The weight capacity of this product is 32 kg each screen. This monitor arm is therefore extremely suitable for widescreens and curved screens. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
