STRIMER WIRELESS 16-12 L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
STRIMER WIRELESS 16-8 L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
The WireView Pro GPU is an advanced device for measuring and monitoring the power consumption of graphics cards. Developed in collaboration with Jon "elmor" Sandström, the WireView Pro GPU connects to the graphics card's 12VHPWR power connector and links to the power supply via the power cable. Power consumption data is shown on an OLED display. The Pro version has been improved with connector detection and temperature sensors. An integrated buzzer provides an audible warning if an adjustable temperature or current limit is exceeded, if the cable is not properly connected, or if an incorrectly specified cable is in use. OLED display Power consumption measurement Power consumption recording Internal temperature sensors at the power connectors External temperature sensors Pin detection for sensor-pin connectors Alarm function Optimized cable management The WireView Pro GPU enables the measurement and monitoring of power consumption from graphics cards via the 12VHPWR power connector and records this data to determine power usage. This information can be used to calculate the operating cost of a graphics card or compare its consumption with other graphics cards. A special 60-second measurement cycle allows for a quick and convenient display of power consumption, making it especially useful for reviews. It can also be used to assess power consumption in specific scenarios or over certain periods. Additionally, it can detect power spikes that occur when using modern high-end graphics cards. The Pro version includes enhanced connector detection, temperature sensors, and an audible warning signal. The WireView Pro GPU’s connector detection identifies whether a cable specified for 150 watts, 300 watts, 450 watts, or 600 watts is being used. Please note that the WireView Pro GPU measures power consumption only through the power connector, not through the motherboard’s PCIe slot. If an incorrect cable is used or the cable is not properly connected, an audible warning will sound. Two temperature sensors located on the board at the power connectors monitor temperatures at those connectors. Up to 600 watts can pass through the connectors, potentially heating them and the surrounding board. An audible alarm will sound if the temperature exceeds an adjustable limit. Two additional temperature sensors (10K NTC) can be connected via cables; two sensors with cable lengths of 5 cm and 20 cm are included. The alarm can also be triggered if the adjustable current limit (amps) is exceeded. The WireView Pro GPU displays measured values on the OLED screen. By pressing a button, you can toggle through the displayed values. The following values may be shown: Current power consumption in watts (W) Current voltage in volts (V), current in amperes (A) Minimum and maximum power consumption in watts (W) Average power consumption over 60 seconds (RAVG in W) and total energy used (E in Wh) Measured temperatures of individual temperature sensors (°C) The WireView Pro GPU is available with the 12VHPWR 16-pin power connector (4x sensor + 12x power/ground) in "Normal" (N) and "Reverse" (R) versions: If the graphics card uses power connectors with the four sensor pins located between the PCB and the 12 power pins, the "N" version is required (PCB - 4x sensor pin - 12x power pins). If the graphics card uses power connectors with the 12 power pins located between the PCB and the four sensor pins, the "R" version is required (PCB - 12x power pins - 4x sensor pin). Note: When using the 12VHPWR adapter, ensure each of the three or four 8-pin PCIe connectors is connected to the power supply with a separate 8-pin PCIe cable. The use of splitters (Y-cables) is strongly discouraged! Warning – Important Notice: Risk of Injury! Depending on the graphics card used, especially with the GeForce RTX 4090, up to 450 watts of power can pass through the WireView connectors. This can cause the PCB at the WireView connector to heat to 60 degrees Celsius with an air-cooled card. With a water-cooled card and no airflow, the WireView PCB can heat up to 100 degrees Celsius! Do not touch the WireView casing during operation. After shutting down the system, allow the WireView to cool before handling.
The Unitek hub from Unitek International Group is a compact and efficient solution for expanding your device's connectivity. Designed to cater to the needs of both high-speed data transfer and multiple device management, this hub features a SuperSpeed USB 3.0 port alongside three USB 2.0 ports, making it suitable for a variety of peripherals from external hard drives to mice and keyboards. Encased in a robust aluminum enclosure, it not only ensures durability but also adds a touch of elegance to your workspace. Fully compliant with key international standards such as FCC, RCM, RoHS, UKCA, and WEEE, the Unitek hub ensures reliability and performance that meets global regulatory requirements. Whether for professional or personal use, this hub offers a seamless and efficient way to enhance your connectivity options.
Conceptronic ETTA03B12. Kaabli pikkus: 1,2 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB 2.0, Maksimaalne andmeedastuskiirus: 0,48 Gbit/s, Toote värv: Must
Conceptronic ETTA03B20. Kaabli pikkus: 2 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB 2.0, Maksimaalne andmeedastuskiirus: 0,48 Gbit/s, Toote värv: Must
Conceptronic ETTA04B12. Kaabli pikkus: 1,2 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB4 Gen 3x2, Maksimaalne andmeedastuskiirus: 40 Gbit/s, Toote värv: Must
Baseus FastJoy 1800Mbps WiFi adapter (black).The Baseus FastJoy WiFi adapter provides exceptional data transfer speeds of up to 1800 Mbps. With support for two frequency bands - 2.4 GHz (600 Mbps) and 5.8 GHz (1200 Mbps), you can comfortably watch high-quality movies, play online games without lag and use the Internet without interference. It's ideal for demanding users looking for a reliable connection.Excellent range and adjustable antennasThe product is equipped with two 5 dBi antennas. As a result, it guarantees a wide range, so you can enjoy stable Internet throughout your home, even if the signal has to pass through several walls. In addition, the antennas are adjustable, allowing you to tilt them at any angle to get the best possible signal.Flexibility and convenienceWith the Baseus FastJoy WiFi adapter you have full freedom of placement - the long 1-meter cable allows you to place the device anywhere without any obstacles. In addition, low power consumption and low latency ensure that your connection will not only be fast, but also energy-efficient.WiFi 6 and safe to useBaseus FastJoy is compatible with the WiFi6 standard, allowing you to enjoy low latency and even faster transmission. What's more, modern encryption standards such as WPA-PSK, WPA2-PSK, WPA/WPA2-PSK and 64/128 WEP ensure the highest level of security and privacy protection.MU-MIMO, OFDMA and CCA technologyWith support for MU-MIMO technology, the Baseus FastJoy adapter allows simultaneous transmission to several devices, making it ideal for homes and offices with multiple users. But it doesn't stop there - the OFDMA solution reduces latency, which is especially useful during intense online games, ensuring a smooth and stable connection. In addition, CCA technology helps avoid interference by automatically selecting the best channel for data transmission, while TWT technology optimizes network performance and enhances security.Two modes of operationThe Baseus FastJoy can act as both a WiFi receiver and a hotspot, making it ideal for many applications. In addition, state-of-the-art chips provide better signal transmission, stable connection and low latency for a smooth Internet experience.Compatibility and stylish designThe Baseus FastJoy WiFi adapter is compatible with Windows 10 and 11, making it ideal for work, gaming and more. What's more, the sleek design makes the device blend in seamlessly with any interior, while the blue light indicator provides information on the status of its operation. ManufacturerBaseusNameFastJoy WiFi Adapter 1800Mbps (External Antenna)ModelB01317600111-06ColorBlackMaterialPC + ABSWeightApprox. 100 gOperating frequency bands2.4 GHz and 5.8 GHzTransmission speed2.4 GHz: 600 Mbps; 5.8 GHz: 1200 Mbps;Wireless communication standardsIEEE 802.11 b/g/n, IEEE 802.11 a/acEncryption standardsWPA-PSK, WPA2-PSK, WPA/WPA2-PSK, 64/128 WEPOperation modeNIC and hotspotCompatible operating systemsWindows 10 / 11
The USB-C hub supports the modern USB 3.1 Gen2 standard and allows you to connect up to 7 devices. Of course, you can also connect and use devices of older USB generations. This practical and noble-looking hub with its aluminum design is a real eye-catcher on each desk. Easy connection via Plug & Play. USB 3.1 Gen2 transfer rates of up to 10 Gbps.
Does your smartphone or tablet no longer have a normal 3.5 mm jack output for your headphones, but only has a USB-C port? Then the DAC adapter from LogiLink is just the right solution for you: simply plug the UA0424 into the USB-C port and the jack plug of your headphones into the adapter. You can then use it without any problems and also have improved sound thanks to DAC and PCM/DSD decoding, which simply makes your music sound even better. With the built-in equaliser, you can adjust the sound to your personal preferences.
The ICY BOX Intel NUC holder IB-MSA103-VM is an optional accessory that is ideal for use with ICY BOX monitor stands. So whether desk mount or wall mount, it all accommodates perfectly into your working environment and easily offers an ergonomic workstation at home or in the office. The ICY BOX Intel NUC holder is a convenient extension panel designed to expand the available VESA mount behind the monitor.
Joyroom S-A43 60W USB-C - USB-C cable 1.5m blackThe Joyroom S-A43 cable is not only functional, but also a durable gadget that will meet the requirements of even the most demanding users. Its innovative design, durability, as well as flexibility make it an excellent choice for use in the car. Thanks to its wide compatibility with popular car systems, this cable fits perfectly into the modern lifestyle and gives you comfort on every trip. Invest in reliability and quality that translates into convenience for everyday use!Advanced technology for better performanceJoyroom S-A43 cable is equipped with a magnetic ring that effectively protects against electromagnetic interference. As a result, data transmission is stable and fast without any delays, allowing you to use your mobile devices comfortably while driving. Enjoy smooth operation of apps such as CarPlay, CarLife, HiCar and many others, without worrying about intermittent connectivity.Flexible and comfortable to useMade of eco-friendly TPU material, the cable offers great flexibility, making it extremely convenient to use. Its design ensures that it can be easily stretched and shortened, and conveniently connects devices in the back of the car. Regardless of where passengers are seated, the cable provides comfortable access to charging (as much as 1.5 meters in length), and the lack of problems associated with tangled cables keeps the vehicle tidy.Durability and safetyThe Joyroom S-A43 cable is a top quality product. Thanks to its robust construction, tested in more than 10,000 bending cycles, it is resistant to mechanical damage, ensuring longevity. The use of an elongated 16-millimeter SR (burst reinforcement) end and oxidation-resistant materials allows for stable use, even under loads of up to 7 kg. The cable also features a thicker copper core for up to 6 times faster charging with less heat build-up.Fast chargingUsing PD's 60-watt fast charging, you'll expressly and safely renew the power of your equipment. The cable offers a USB-C to USB-C port, making it compatible with smartphones or tablets. Opt for convenience and enjoy every ride with Joyroom S-A43! ManufacturerJoyroomModelS-A43Connector typeUSB-C to USB-CFunctionCharging/data transmissionPowerPD 60 WATTSData transmission speed480MbpsMaterialABS + TPUCable length1.5 mColorblack
USB 2.0 A to USB-C 3A cable Vention CTQWF 1M (white)The USB 2.0 A to USB-C 3A Vention CTQWF cable is a reliable solution for all owners of devices equipped with a USB-C connector. It stands out for its high quality workmanship, allowing for fast charging and seamless data synchronization. Its minimalist design will fit perfectly into any environment, from the office to the home technology corner.Fast charging and data transferWith a maximum current of 3A, the cable provides fast charging, significantly reducing the time needed to charge your smartphone or other devices. In addition, it supports data transfer at 480 Mbps, allowing you to transfer files such as photos, documents or videos in no time.High durability and safetyThe use of tin-plated copper cable and nickel-plated coating increases the durability and stability of the transmitted signal. A built-in 56Ω resistor further protects connected devices from surges, ensuring safe daily use.Compatibility with a wide range of devicesThe cable is designed to be compatible with the latest devices, including smartphones from the iPhone 15 series, Xiaomi, Samsung, Huawei and other models that support the USB-C connector. It will also be perfect for charging accessories such as powerbanks, wireless headphones and portable speakers.Ergonomic design and comfortable useThe robust yet flexible design of the cable increases its resistance to bending, as confirmed by durability tests. With a length of 1 meter, the cable allows you to use your devices comfortably even while charging, ensuring maximum comfort. ManufacturerVentionModelCTQWFInterfaceUSB-C/USB-APlating processNickel platedConductorTin-plated copperShieldingAluminum foilShieldingPVCCoatingPVCFROM3.5 mmData transfer rate480 MbpsRated current3ARated power60W Max.Length1m
Vention USB-C to HDMI wireless transmitter/receiver 0.15m (black)Vention ADO allows you to wirelessly transmit video and audio from USB-C devices to HDMI displays without the need for wires. The point-to-point connection in the 5.8 GHz band provides low latency and a stable signal up to 50 meters in open space. The 4K resolution at 30 Hz guarantees detailed images and smooth visual transitions. The kit includes an HDMI cable (0.3m) and a USB-A to USB-C power cable (1m).Performance and chargingThe transmitter features a USB-C Power Delivery port with up to 60 watts of power to simultaneously transmit video and charge a phone, tablet or laptop. The receiver offers an HDMI port and a USB-C 5V/2A power port. A built-in button allows you to quickly disconnect and reconnect your device without having to restart the connection.MultifunctionalityThe device supports Mirror and Extend modes, also allowing pairing with up to 8 transmitters for seamless source switching. With support for laptops, smartphones and tablets, the adapter will work well in conference rooms, classrooms and multimedia presentations.Included:TransmitterReceiverUSB-A to USB-C cable (1 m)HDMI cable (0.3 m) ManufacturerVentionModelADOBBColorBlackTransmitter interface (TX)USB-C male + PD power portReceiver interface (RX)HDMI female + USB-C power portCoating processNickel-platedHousing materialABSResolution4K @ 30 HzRated power (TX)60W (PD)Receiver power supply (RX)5V = 2ATransmission bandwidth5 GHzTransmission rangeUp to 50 m (in open space)
Universal pole mount for LED, LCD monitors with a diagonal of 17 to 32" and a maximum weight of up to 8 kg. The bracket allows you to adjust the tilt angle and to rotate the monitor. This allows you to position the monitor in the optimal viewing position, which increases comfort while working and reduces strain on the spine and eyes. The removable VESA plate allows easy and quick mounting of the monitor to the stand. Suitable for poles with diameter 28 mm - 60 mm. The screen can be easily mounted on a bracket in VESA standard: 75x75 / 100x100 mm. Compatible with LED monitors, LCD brands such as Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, iiyama, Acer, Gigabyte.
The 483 mm (19“) DIN Rail Holder makes the installation of suitable equipment on the already mounted 390 mm width DIN rail possible. It is variable in depth and can be turned 90° up or down to install the components horizontally if necessary. The rear side is equipped with a height variable C shaped cable tray with fixing points for Velcro tape or cable ties. The complete frame can also be adjusted in height (4U brackets are fixed in the rack) to suit individual needs of space.
