Product kirjeldus: Club 3D video adapter - 25 cm Cable: Video adapter - DisplayPort / HDMI Max Output resolutsioon: 4096 x 2160 - 60 Hz pikkus: 25 cm Ühendusi: DisplayPort - naissoost Ühendusi (Second End): HDMI - male USB (power only) - male Compliant Standards: DisplayPort 1.2a Features: 4K tugi, active adapter
DisplayPortiga varustatud seadme ühendamine 4K HDMI kuvariga või projektoriga Toetab kõrgekvaliteedilisi resolutsioone kuni 4K@60hz Kõrge dünaamilise ulatuse tugi tagab sügavamad mustad, heledamad valged ja laiema värvigamma. Aktiivne kiibistik täiustatud ühilduvuse tagamiseks erinevate graafikakaartidega 2-aastane garantii Lindy aktiivsete DisplayPort-HDMI-kaablite tootesari ühendab suurepärase jõudluse ja stiilse disaini, et tagada DisplayPort 4K@60Hz signaalide kvaliteetne muundamine HDMI kuvarile või projektorile väljastamiseks. See aktiivkaablite valik on varustatud sisseehitatud kiibistikuga, mis mitte ainult ei taga usaldusväärset ühendust, vaid parandab ka ühilduvust nii kaherežiimiliste kui ka mitte-duaalrežiimiliste graafikakaartide ja allikaseadmetega, mis sobib ideaalselt DP-graafikakaartide, sülearvutite ja arvutitega kasutamiseks, vältides samal ajal vajadust täiendavate adapterite järele. Tänu kuni 4096x2160@60 Hz resolutsioonide toetusele ja täiendavale High Dynamic Range'i toetusele saab 4K-sisu vaadata kristallselge selguse, parema kontrasti ja elutruumate värvidega. Need kaablid sobivad suurepäraselt pilkupüüdvate jaemüügiekraanide, innovaatiliste töökeskkondade või kaasahaarava videomängu loomiseks spordibaarides ja kodukinos, samas kui pakkimata mitmekanalilise heli toetus võimaldab muljetavaldavat kolmemõõtmelist ruumilist heli, mis täiendab üksikasjalikku ja selget videot. AMD Eyefinity-tehnoloogia toetus annab kasutajale ka kulutõhusa võimaluse luua kuni 3 või enamast monitorist koosnev mittestandardse kuvasuhtega või ülikõrge resolutsiooniga kuvar. See funktsioon võimaldab kasutajal käivitada samaaegselt mitut rakendust eraldi ekraanidel, parandades tootlikkust töökohal või luues laiekraanilise mängukogemuse. Pange tähele: Heliväljund üle HDMI on toetatud ainult siis, kui sülearvuti või lauaarvuti graafikakaart toetab heliväljundit üle DisplayPort. Mitmed sülearvutite pardagraafikaadrid, näiteks Mobile Intel 4 Series Express Chipset sülearvutites EI toeta heliväljundit üle DisplayPort, isegi kui helikontrollerite jaoks on paigaldatud HDMI-tugi (Intel High Definition Audio HDMI Service). Sellistel juhtudel tuleb luua eraldi audioühendus. Pange tähele: Mõned Nvidia uusimad draiverid ei tööta korrektselt 4k@60Hz 4:4:4:4 puhul, kui nad konverteerivad DP/mDP-st HDMI-sse, ja töötavad ainult 4k@60Hz 4:2:2 puhul.
Ühe UHD HDMI signaali jagamine ühest allikaseadmest neljale UHD ekraanile Toetab kuni 4K2K @30Hz resolutsioonidega, sealhulgas 3D 1080p Toetab 7.1-kanalilisi LPCM, Dolby TrueHD ja DTS-HD Master Audio digitaalseid helisignaale Toetab digitaalseid videovorminguid süvavärvirežiimis kuni 36 bitiga 2-aastane garantii Lindy HDMI 1.4 4K UHD splitter on võimeline kuvama kuni 3840 x 2160 resolutsiooni. See on ideaalne tänapäevaste 1080p 3D-signaalide jaoks ja on tulevikukindel veel paljudeks aastateks. Märkus DVI-ga varustatud seadmete kasutamise kohta selle HDMI-splitteriga: DVI-ühendusega varustatud seadmete ühendamiseks saate kasutada kas moodulilisi DVI/HDMI adaptereid või DVI/HDMI adapterkaableid. Pidage meeles, et DVI on "ainult video" liides, audiosignaalid ei ole DVI seadmete kasutamisel toetatud. Pakendi sisu: 4 port HDMI 4K UHD Splitter Mitme riigi vooluallikas Kasutusjuhend
USB Type C Port Blockers are useful little devices that system administrators can use to physically prevent access to USB ports. USB Port Blockers allow locks to be inserted and removed from USB ports to stop unauthorized users from inserting pen drives, USB mass storage and mobile devices into shared workstations or devices with USB ports in public spaces.To use, simply attach a lock to the key and insert it into the USB port. Release the sliding mechanism on the key to leave the lock in place. To remove, simply insert the key back into the lock and pull away.
Ühe HDMI 2.0 allika jagamine 4 HDMI ekraanile Toetab kuni 4K@60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. HDCP 2.2 tugi täiustatud ühilduvuse tagamiseks EDID-haldus probleemideta paigaldamiseks 2-aastane garantii Lindy 4 Port HDMI 18G Splitter on kompaktne ja kvaliteetne lahendus HDMI 2.0 18G signaalide jaotamiseks mitmele ekraanile ühest allikaseadmest. Toetades kuni 4K 60Hz 4:4:4 8bit, sobib see jaotur suurepäraselt pilkupüüdvate digitaalsete märkide loomiseks jaemüügistsenaariumides, kvaliteetse video näitamiseks eri ruumides meditsiiniasutustes või tagamaks, et publik ei jääks kahe ekraaniga spordibaarides ilma ühestki tegevusest. Suure dünaamilise ulatuse (High-Dynamic Range) lisatoetus tagab, et videosisu on nähtav suurema heleduse, paremate kontrastide ja palju laiema värvivahemiku abil, mis tagab elutruumad värvid. Täiendav võimalus jagada seda jagajat veel kolmele tasandile võimaldab laiendada HDMI jagamise kogemust, mis on ideaalne mitme ekraaniga olukordades, näiteks informatiivsetes ülekannetes lennujaamades, rongijaamades või börsikontorites. HDCP 2.2 tugi tagab, et mitmesuguse 4K-sisu puhul ei teki probleeme allikaseadmetega, sealhulgas digibokside, Blu-Ray-mängijate ja 4K HDR-meediamängijatega ühendamisel, samas kui seadme nutikas EDID-halduslüliti tagab maksimaalse ühilduvuse kuvariga. Jaoturi vastupidav ja kompaktne disain tagab ka selle, et seadet saab paigaldada diskreetselt, et see ei segaks ekraanil kuvatavat sisu.
USB Type-C 5-in-1 multi-port adapter (Hub + HDMI + PD + card reader + LAN) - 5-in-1: 3-port USB hub, 4K HDMI, Gigabit LAN port, card reader and USB Type-C PD charge support - Fast Gigabit networking and Superspeed USB 3.1 data transfer via USB hub - Practical card reader - Plug & Play Product Type USB Hub 1xHDMI, 3xUSB 3.1 1xUSB-C, 1xSD Card Slot 1xRJ45
Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 2 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
The DIGITUS video/audio extender kit offers a comprehensive solution for extending your HDMI and USB-C connections wirelessly over distances up to 30 m. Designed to support 4K video resolution at a 30 Hz V-Sync rate, it ensures high-quality visuals for presentations, movies, and more. The inclusion of HDMI and USB-C ports on both the transmitter and receiver makes it compatible with a wide range of devices, providing flexibility for various setups. Security is paramount, with 128-bit AES, WPA2-Enterprise, and WPA2-PSK encryption algorithms safeguarding your transmissions. Additionally, the device's durable ABS housing and compliance with key standards like DisplayPort 1.2 and HDCP 2.2 ensure reliability and longevity. Whether for professional presentations or enhancing your home entertainment system, this extender kit delivers both performance and peace of mind.
The Neomounts DS60-425WH1 NEXT Lite is a full motion desk mount for screens up to 27" with a maximum weight capacity of 8 kg. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal viewing angle for your screen. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screen to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS60-425WH1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS60-425WH1 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.
DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Enhance storage capabilities with the DIGITUS storage enclosure. Built for M.2 NVMe cards, this product supports a data transfer rate of 20 Gbps, ensuring speedy access to your files and applications. The aluminum design provides durability while facilitating heat dissipation, making it suitable for various environments with operating temperatures from 5°C to 50°C. With a compact length of 25 cm, this USB-C to USB-C external cable ensures a tidy and efficient setup without compromising performance.This storage enclosure supports up to 8 TB capacity, allowing ample space for your essential data. The LED indicator offers a clear view of the device's status, providing real-time feedback on its operation. It is user-friendly with its Plug-and-Play capability, seamlessly connecting via USB 3.2 (Gen 2) to your devices. Ideal for those looking to expand storage options without the hassle of complex installations.
Desk mounted adjustable monitor arm for 3 monitors Position your screen perfectly Lightweight and tilting design Monitor desk mount with single arm for 3 monitors Arm rotates, extends and retracts, tilts to change reading angles Monitor mount bar for side-by-side mounting of 3 monitors Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27") Durable adjustable gas-springs suitable for monitors of 1 - 6 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The Neomounts DS60-600BL2 NERO monitor arm is the perfect choice for those looking for a sturdy and versatile solution for two monitors up to 32" with a weight capacity of 8 kg per screen. This full motion monitor arm offers maximum flexibility thanks to its versatile tilt (90°), rotate (360°) and swivel (180°) technology, enabling you to always find the optimal viewing angle for an ergonomic working posture. The NERO desk mount features manual height and depth adjustment, allowing you to adjust your workspace completely to your liking. In addition, the clever 180° stop mechanism prevents the mount from making contact with the wall or separation panel when installed near it. The welded base guarantees optimal stability and sturdiness. The practical cable management system ensures neat routing of cables. In addition, the base of the DS60-600BL2 provides a convenient space to place a phone, for a tidy desk. The DS60-600BL2 is suitable for screens that meet pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. For a seamless connection of the screens, the micro-adjustment function can be used. Installation of the NERO is quick and easy. The Easy-release system makes it easy to attach or detach the screen. Additionally, fixing the clamp to the desk only takes a few actions and, in addition to manual installation, can also be installed using an Allen key or drill for even faster installation. The NERO monitor arm's quick-span lever also allows for easy adjustment of the arm's height without additional tools. With sustainability in mind, the packaging of the NERO monitor arms is 100% plastic-free and made entirely of recyclable cardboard and paper.
The Neomounts DS90-325BL1 is a full motion height adjustable desk mounted workstation for screens up to 32", keyboard and mouse. The mount can support screens up to 9 kg (curved: 6 kg), while the keyboard tray can support max. 1 kg. The versatile tilt (70°), rotate (360°) and swivel (180°) technology allows the monitor arm to change to any viewing angle to fully benefit from the capabilities of the screen. The keyboard tray includes a wrist support and mouse pad for optimum comfort. The workstation desk mount has a large height adjustability range from 44-95 cm and can be used both seated and standing. To ensure quick repositioning and the most optimal working position, the DS90-325BL1 features gas spring height adjustment for both the monitor arm and keyboard tray arm. The smart cable management system ensures orderly routing of the cables. The DS90-325BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm and is equipped with a Quick-release VESA system for fast and easy installation. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available.
Floor mat XL PremiumWide range of compatibilityThe Next Level Racing Premium XL floor mat is compatible with all current Next Level Racing cockpits, including Motion Plus, GTRacer Series, Go Kart Plus, Elite Series configurations and various Lite, F-GT and Flight Simulator models. The non-slip backing keeps the mat securely in place during intense racing or flying sessions. Thick premium carpet made from high quality polyester fibre for durability. Reflective logos reflect light for a striking visual effect. Universal fit for all Next Level Racing cockpits, adds a consistent and refined look to your setup.
The Club 3D CAC-1378 HDMI cable delivers performance in high-definition audio and video. This cable supports resolutions up to 4K at 240 Hz with a data transfer rate of up to 48 Gbps, suitable for various multimedia applications. With features like HDR support, Variable Refresh Rate, and Enhanced Audio Return Channel, this cable ensures a seamless experience for both gaming and streaming. Its bidirectional capability allows for versatile connections between devices, while the gold-plated connectors enhance signal quality. The cable is compliant with FCC, RoHS, EMI, and DSC 1.2 standards, assuring reliability and safety in your setup.
Der Voyager XP 1470g von Honeywell ist eine solide Lösung für Arbeitsplätze, an denen zuverlässiger 1D- und 2D-Barcode-Scan benötigt wird. Er scannt auch schlecht gedruckte oder beschädigte Barcodes und unterstützt das Scannen von Smartphone-Displays. Damit ist er ein zuverlässiges Arbeitsgerät an Arbeitsplätzen mit hohem Scanaufkommen wie im Einzelhandel oder bei der Zugangskontrolle. Sein Gehäuse ist nach IP52 geschützt und übersteht auch Stürze aus einer Höhe von bis zu 1,8 Metern. Dabei fällt sein Gewicht mit 130 Gramm gering aus, was die Handhabung zusätzlich erleichtert.
Turns ‘older’ IDE devices into SATA devices , Allows recent SATA devices to be connected to ‘older’ IDE host controllers , Supports Serial ATA 1.0 interface with data transfer rates up to 150 MBytes/sec , Supports all UDMA-33/66/100/133/150 IDE hard drives and most ATAPI devices, Easy installation, no drivers required ,
Original part number CCP-MUSB3-AMBM-10 Gembird AM-Micro cable USB 3.0 3m Class of product Cables - USB plugs 1x USB 3.01x male micro-USB typ B (5+4-pin) /USB 3.0/ Cable length 3 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Up to 10 times faster than USB 2.0 SuperSpeed: data transfer rate up to 600 MBpsUSB 2.0 & USB 1.1 Backward compatible
