Superfast external AXAGON EEM2-GTR THIN RIB box koos USB 3.2 Gen 2 interface is designed NVMe (PCI-Express) M.2 SSD disks. The double-sided USB-C ühenduspesa on the box together koos the supplied USB-C -> USB-C kaabel enables a reliable connection t
Ühe UHD HDMI signaali jagamine ühest allikaseadmest kahele UHD ekraanile Toetab kuni 4K2K @30Hz resolutsioonidega, sealhulgas 3D 1080p Toetab 7.1-kanalilisi LPCM, Dolby TrueHD ja DTS-HD Master Audio digitaalseid helisignaale Toetab digitaalseid videovorminguid süvavärvirežiimis kuni 36 bitiga LINDY HDMI 1.4 4K UHD splitter on võimeline kuvama kuni 3840 x 2160 resolutsiooni. See on ideaalne tänapäevaste 1080p 3D-signaalide jaoks ja on tulevikukindel veel paljudeks aastateks. Märkus DVI-ga varustatud seadmete kasutamise kohta selle HDMI-splitteriga: DVI-ühendusega varustatud seadmete ühendamiseks saate kasutada kas moodulilisi DVI/HDMI adaptereid või DVI/HDMI adapterkaableid. Pidage meeles, et DVI on "ainult video" liides, audiosignaalid ei ole DVI seadmete kasutamisel toetatud.
USB Type C Port Blockers are useful little devices that system administrators can use to physically prevent access to USB ports. USB Port Blockers allow locks to be inserted and removed from USB ports to stop unauthorized users from inserting pen drives, USB mass storage and mobile devices into shared workstations or devices with USB ports in public spaces.To use, simply attach a lock to the key and insert it into the USB port. Release the sliding mechanism on the key to leave the lock in place. To remove, simply insert the key back into the lock and pull away.
Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
USB Type-C 3-in-1 multi-port adapter (Hub + HDMI + PD) - 3-in-1: 3-port USB hub, 4K HDMI and USB Type-C PD - Superspeed USB 3.1 Gen 1 (5 Gbps) data transfer via USB hub - Plug & Play Product Type USB Hub 2xHDMI, 3xUSB 3.1 1xUSB-C
The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1A fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Full-size RJ45 connector LEDs on RJ45 connector to indicate activity and link status. Support PXE boot, Wake-On-LAN, MAC pass through if host notebook supports Faster than Gigabit: For smoother video conferencing and seamless streaming using 2.50Gbps switches or routers,this adapter doubles the performance of a traditional Gigabit Ethernet adapter. Ethernet signals up to 2.5 Gigabit are designed to work over Cat 5e cabling. Simply pair your USB Ethernet Adapter with 2.5Gbps-capable switches and routers to get upgraded networking without changing your cables.
The Cablexpert Premium USB-C cable from Gembird stands out with its exceptional performance and durability. Designed to meet the needs of both professionals and tech enthusiasts, this cable offers a 20 Gbps data rate, ensuring quick and efficient data transfer. It also supports up to 100 W of charging power, making it perfect for fast charging of devices. With 4K60Hz video support, it delivers crystal-clear visuals, ideal for streaming or professional presentations. The cable's construction features metal connectors and a braided cotton jacket, providing not only a sophisticated look but also enhanced durability for long-term use. Compliant with USB 3.2 Gen 2x2 standards, it ensures compatibility with a wide range of devices, making it a versatile choice for various connectivity needs.
The Neomounts DS70PLUS-450BL1 NEXT Core is a full motion desk mount for curved ultra-wide screens up to 49". The mount features a strengthened head specifically designed for curved ultra-wide screens and to support a higher maximum weight up to 18 kg (curved 14 kg). The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (5,4-49,7 cm), to create the perfect working position. The DS70PLUS-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70PLUS-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
ROG Strix Arion is an SSD enclosure that fits an M.2 PCIe NVM Express SSD with a 2230/2242/2260/2280 form factor and features USB-C 3.2 Gen 2 connectivity to deliver data transfer speeds of up to 10 Gbps. Its sleek aluminum alloy case features thermal pads for excellent heat dissipation, exclusive ASUS Aura Sync lighting effects, and a protective holder with an R-hook that altogether make ROG Strix Arion a high-performance, mobile storage solution.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
Enhance storage capabilities with the DIGITUS storage enclosure. Built for M.2 NVMe cards, this product supports a data transfer rate of 20 Gbps, ensuring speedy access to your files and applications. The aluminum design provides durability while facilitating heat dissipation, making it suitable for various environments with operating temperatures from 5°C to 50°C. With a compact length of 25 cm, this USB-C to USB-C external cable ensures a tidy and efficient setup without compromising performance.This storage enclosure supports up to 8 TB capacity, allowing ample space for your essential data. The LED indicator offers a clear view of the device's status, providing real-time feedback on its operation. It is user-friendly with its Plug-and-Play capability, seamlessly connecting via USB 3.2 (Gen 2) to your devices. Ideal for those looking to expand storage options without the hassle of complex installations.
Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.
The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.
The Club 3D CAC-1188 is a versatile video adapter cable designed to connect Mini DisplayPort devices to HDMI displays. This active adapter supports 8K at 60Hz and 4K at 120Hz, offering vibrant and fluid visuals. Additionally, it supports Dynamic HDR10, which enhances contrast and color accuracy, delivering a satisfying viewing experience.Built with reliable nickel-plated connectors, the CAC-1188 offers durability and consistent performance. The adapter includes a hang box package for easy storage and transport. Compliant with major standards such as FCC, RoHS, and HDCP 2.2, this product meets necessary regulations and assures compatibility across a broad range of devices.
The external AXAGON EEM2-SD2 DISPLAY box with a USB 10Gbps interface is designed for M.2 NVMe or SATA SSD drives. Reliable connection to a computer is ensured by a reversible USB-C connector on the box. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. This way, you can connect the box to any available USB port on your notebook. The box is equipped with an advanced LED display that provides an instant overview of your drive's status. It offers several display modes, including detection of the connected drive, the file system used, temperature, drive health, data transfer speed, and operating hours. A detailed graph allows real-time monitoring of the drives temperature, while the sleep mode saves power when idle. With this intelligent monitoring, you will always have your drive under control simply, clearly, and efficiently. Thanks to the USB 3.2 Gen 2 interface, the transfer speed is up to 10 Gb/s. The external M.2 box also supports other modern features such as UASP, TRIM, and allows reading of S.M.A.R.T. information monitoring the condition of the drive. A unique feature, thanks to the used chipset, is the possibility to use both M.2 NVMe and SATA drives. You dont have to think about which type of M.2 drive to insert into the box. The box allows mounting of SSD cards in three different lengths 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided, and the box does not limit the capacity of the inserted SSD drive. Screwless box opening makes installation and removal of the M.2 SSD drive easier. Drive replacement is quick and simple, expanding the possible uses of the box, e.g., for data migration, testing, etc. The external metal casing is finished in gray with an elegant surface that prevents unwanted fingerprints. The aluminum body of the box and the thermal pad ensure ideal cooling of the inserted M.2 SSD drive. This extends its lifespan and also prevents speed throttling, known as Thermal Throttling. By inserting an M.2 SSD drive into this box, you can easily create a fast, compact, and universal external drive that can be used not only with computers and notebooks but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), USB-C female connector. Compatible with USB 5Gbps, USB 20Gbps, USB4, and Thunderbolt 3/4/5. Supported Devices: NVMe M.2 SSDs, SATA M.2 SSDs, designed for M key and B+M key card formats, NGFF 75-pin M key slot for M.2 drives. LED display shows: Recognizing - disk recognition (displayed when the box is connected to a device) Partition - displays the file system, size, and system name of the disk Idle - inactivity (information about the disk - used interface and disk size, speed of the connected bus, partitioning standard of the disk) Disk info - displays information about the disk (manufacturer label of the disk, actual disk temperature, health, amount of written / read data, total running time of the disk, number of disk removals without using safe removal) Monitor real-time disk temperature using a graph Rd/Wr - data transfer (during data transfer, it is possible to switch between sections) Sleep - disk sleep mode Other Features: Supports transfer speeds of 10.000 / 5.000 / 480 Mbit/s. Supports M key or B+M key NVMe (PCIe-Express) and SATA (AHCI) M.2 SSDs with no capacity limit. Supports M.2 drives sizes 2242, 2260, 2280 mm. Supports single- and double-sided M.2 SSDs. Complies with PCIe Base Specification Revision 3.1a specification. Complies with NVM Express 1.3 specification. Complies with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Complies with USB Mass Storage Class specification. The total box bandwidth / transmission rate is determined by the USB interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster transfers in Windows 8 and above. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support. Power supply via USB bus up to 900 mA is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB and data transmission (permanent light). Durable aluminum body and thermal pad improve M.2 SSD cooling. Higher surface temperature is not a defect thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 25 cm long and USB type C female / USB type A male adapter are included.
The Club 3D CAC-1378 HDMI cable delivers performance in high-definition audio and video. This cable supports resolutions up to 4K at 240 Hz with a data transfer rate of up to 48 Gbps, suitable for various multimedia applications. With features like HDR support, Variable Refresh Rate, and Enhanced Audio Return Channel, this cable ensures a seamless experience for both gaming and streaming. Its bidirectional capability allows for versatile connections between devices, while the gold-plated connectors enhance signal quality. The cable is compliant with FCC, RoHS, EMI, and DSC 1.2 standards, assuring reliability and safety in your setup.
Logi Bolt USB-C vastuvõtja pakub turvalist ja suure jõudlusega juhtmevaba ühendust sinu Logi Boltiga ühilduva hiire, klaviatuuri või komplekti ning arvuti vahel. See sobib varuvastuvõtjaks või mitme arvuti kasutamisel ning võimaldab ühendada kuni kuus Logi Bolt seadet ühe vastuvõtjaga. Usaldusväärne ühendus töötab kuni 10 meetri kauguselt ka häiritud juhtmevabas keskkonnas ning seadmete sidumine on lihtne Logitech Options+ äpi kaudu. • Turvaline ja töökindel Logi Bolt juhtmevaba ühendus • Juhtmevaba tööulatus kuni 10 m • Ühenda kuni 6 Logi Bolt hiirt ja klaviatuuri ühe vastuvõtjaga • Lihtne sidumine Logitech Options+ rakenduse kaudu • Ühilduv Windowsi, macOS-i, Linuxi ja ChromeOS-iga
HDMI to DVI male-male cable with gold-plated connectors, 1.8m, bulk packageHigh-Definition Multimedia Interface (HDMI) is the first industry-supported digital audio/video interface.HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.Digital Video interface (DVI) is a high-quality digital video standard and a part of HDMI interface.
Original part number CCP-MUSB3-AMBM-10 Gembird AM-Micro cable USB 3.0 3m Class of product Cables - USB plugs 1x USB 3.01x male micro-USB typ B (5+4-pin) /USB 3.0/ Cable length 3 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Up to 10 times faster than USB 2.0 SuperSpeed: data transfer rate up to 600 MBpsUSB 2.0 & USB 1.1 Backward compatible
Original part number CC-HDMI4-15 Product name Gembird HDMI V1.4 male-male cable with gold-plated connectors 4.5m, bulk package Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video HDMI plugs 2x male HDMI A-type (19-pin, Single Link) Cable length 4.5 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information HDMI V1.4
