Tootja: iTec Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 tpe C (naissoost) 2-ühenduse tüüp: Display Port värv: must Lisaandmed: Expand your desktop to external Display Port monitor via new USB-C, või Thunderbolt 3 ühenduspesa, the kaabel adapter allows you to transfer video koos 4K Ultra HD resolutsioon, ja stereo sound, 1x USB-C 3.1 või Thunderbolt 3 ühenduspesa, transfer rate Kuni 10 Gbps (USB-C), ja 40Gbps (Thunderbolt 3) to connect the adapter to a notebook, tablet, või PC, Graphic liides Lisainfo: i-tec USB-C DisplayPort kaabel Adapter 4K/60 Hz 150cm
Product kirjeldus: kaabelxpert Premium USB-C kaabel - USB-C to USB - 2 m Type: USB-C kaabel Features: Sync ja charge, braided pikkus: 2 m ühenduspesa: 24 pin USB-C - plug ühenduspesa (Second End): 4 pin USB Type A - male Rated Current: 2.1 A Compliant Standards: USB / USB 2.0 värv: must, valge
Ideaalne olukordades, kus ruum on piiratud, näiteks autode AV-installatsioonides. Kullatud tihvtid ja pistikud Sisemine varjestus vaskfooliumiga Täielikult HDMI-ühilduv 10-aastane garantii
See kaabel võimaldab ühendada DisplayPortiga varustatud arvuti 4K HDMI kuvariga või projektoriga. Märkused audiotoe kohta: Heliväljundit üle HDMI toetatakse ainult siis, kui süle- või lauaarvuti graafikakaart toetab heliväljundit üle DisplayPort. Mitmed sisseehitatud graafikaadapterid, näiteks Mobile Intel 4 Series Express Chipset sülearvutites (nt Dell E6400), EI toeta heli väljundit üle DisplayPort, isegi kui HDMI-tugi (Intel High Definition Audio HDMI Service) on paigaldatud helikontrollerite jaoks. Sellistel juhtudel tuleb luua eraldi audioühendus. Toetab videopeegeldust ja laiendatud töölaua režiimi. Ühendused: DisplayPort pesa kuni HDMI pesa: DisplayPort pesa kuni HDMI pesa Vastab DP 1.2 spetsifikatsioonile ja HDMI 1.4a nõuetele. Toetab kuni 3840 x 2160@60Hz 8-bitist värvi 2-aastane garantii
15 meetri USB 3.0 aktiivne pikendusjuhtme korduskaabel Toetab ülekandekiirusi kuni 5Gbps Veelgi suuremate vahemaade saavutamiseks ühendage lihtsalt 2 kaablit järjestikku Plug & Play 2-aastane garantii Lindy USB 3.0 aktiivne pikenduskaabel kasutab sisseehitatud aktiivset elektroonikat, et pikendada USB 3.0 seadme kaabli pikkust täiendavalt 15 m võrra, toetades samal ajal jätkuvalt kuni 5 Gbit/s andmeedastuskiirust. Tänu USB A isas- ja USB A emasühendusele võimaldab see A-tüüpi seadmeid, näiteks salvestusseadmeid, veebikaameraid ja muid A-tüüpi seadmeid ühendada pikema vahemaa tagant arvutite, sülearvutite ja tahvelarvutitega, tagades samal ajal paindliku paigutuse. Kuni 2 pikenduskaablit saab omavahel ühendada, et saavutada 30 m kaugus. Lindy USB 3.0 aktiivne pikenduskaabel ühildub kõigi A-tüüpi USB-ga varustatud arvutitega. Tänu plug and play-funktsioonile saab seda pikenduskaablit paigaldada kiiresti ja minimaalse vaevaga, mis on ideaalne nii professionaalsetele kui ka esmakordsetele kasutajatele. aktiivne USB-pikenduskaabel on varustatud ka alalisvoolupesa välise toiteallika (ei kuulu komplekti) ühendamiseks, kui kasutate USB-perifeerseadmeid, millel on suuremad energiavajadused. Teave USB 3.0, 3.1 ja 3.2 kohta USB 3.0, USB 3.1 ja USB 3.2 arvutid, kaablid ja seadmed ühilduvad omavahel, kui kasutatakse kas USB Type A või USB Type C host-liidest. USB 3.0, USB 3.1 Gen 1 ja USB 3.2 Gen 1 toetavad kõik andmeedastuskiirust kuni 5 Gbps. USB 3.1 Gen 2 ja USB 3.2 Gen 2 toetavad mõlemad andmeedastuskiirust kuni 10 Gbit/s.
USB 3.2 Type C to M.2 NVMe & SATA SSD Docking & Clone Station - Simultaneous access to an M.2 NVMe and a SATA SSD or Offline Cloning from an M.2 NVMe SSD to a 2.5"/3.5" SATA SSD/HDD as well as the other way round - Allows fast and simultaneous access to an M.2 NVMe and a SATA SSD/HDD - Features Offline Cloning from an M.2 NVMe SSD to a 2.5” or 3.5” SATA SSD or HDD as well as the other way round - Supports USB 3.2 Gen 2 SuperSpeed data rates up to 10Gbps - Compatible with USB Type C or A equipped computers The Lindy USB 3.2 Gen 2 Type C M.2 NVMe & SATA SSD/HDD Docking & Clone Station features both high speed Docking as well as Clone functions. It supports simultaneous reading and writing to an M.2 NVMe SSD and a SATA SSD/HDD as well as Offline Cloning (copying data without connection to a host computer) from an M.2 NVMe SSD to a 2.5” or 3.5” SATA SSD or HDD as well as the other way round. This Docking & Clone Station is an ideal tool for system installers and integrators, computer technicians and IT departments for quick backups or data recovery. It makes bit by bit clones (including Operating System and partitions) of the source disk onto the target disk, making it perfect for upgrading to larger capacity & different SSDs. Colour Black Dimensions 102x67.5x14.5mm, Weight 0.26 kg
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-HCR3A expands your laptop, computer or phone with four ports and SD / microSD card reader. Through the double-sided USB-C connector, you can easily and quickly connect three USB devices, memory cards and an HDMI display to the computer at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for notebook. The USB hub offers three USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. Elegant aluminum body ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. Port replicator is an ideal accessory for laptops without USB-A connectors, card reader and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20 cm long cable. USB outputs: 3x SuperSpeed USB port, USB-A female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A in each of the hub's USB ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: Digital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB), MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power supply via USB bus (USB bus power). Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. White LED indicates the connection to the computer's USB port. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12.5 mm. Weight 58 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10, 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1A fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Gembird HDMI to Micro-HDMI adapter Features HDMI (A female) to micro-HDMI (D male) adapter; Gold plated contacts. Type HDMI to Micro-HDMI adapter Dimensions 35 x 20 x 11 mm Weight 7 g
Length 1.5 m Product Type Cables Length 1,5 m Dimensions 360x56x41 mm Shipping box quantity 1 Unit Brutto Volume 0,002168 cubm Unit Net Weight 0,49 kg Unit Gross Weight 0,54 kg
Tootja: Lanberg Tootegrupp: kaablid - HDMI | DP | Component | DVI | VGA kaabli tüüp: Audio-Video DisplayPort plugs: 1x male Displayport DVI plugs: 1x naissoost DVI-D (Dual Link) /24+1/ kaabli pikkus: 0.1 m kullatud pistikud: Jah kaabli värvus: valge Lisaandmed: Enables to connect a DVI display to a DisplayPort video source
DELL DBQAUANBC070. Hostiliides: USB 3.0 (3.1 Gen 1) Type-C, Jaoturi liidesed: DisplayPort,HDMI. Toote värv: Must. Laius: 62 mm, Sügavus: 65 mm, Kõrgus: 11 mm. Maksimaalne resolutsioon: 3840 x 2160 pikslit
Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF10AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
Product kirjeldus: D-Link DUB H4 - hub - 4 ports seadme tüüp: Hub - 4 ports Subtype: USB Ports: 4 x USB 2.0 mõõtmed (WxDxH): 6.3 cm x 6.3 cm x 1.4 cm kaal: 85 g Localisation: Europe Manufacturer Warranty: 2-year garantii
Original part number SPF5-C-5 Product name Energeniepower strip 5 sockets, 1,5m, black Producer EnerGenie (by Gembird) Class of product Surge potectors Output connector type Schuko Number of outputs 5 Pcs Power cable length 1.5 m Built-in filter for RJ-11 phone line No Built-in filter for RJ-45 data line No Built-in filter for AV signal No Rated voltage 250 V AC Current voltage 16 A Frequency 50 Hz60 Hz Energy absorbtion 250 J Maximal impulse's current 6000 A Anti-interference filter(EMI/RFI) No Wall-mounting No Width 56 mm Length 330 mm Height 45 mm Net weight 0.45 kg Colour Black Additional information Protects valuable equipment from harmful power surgesSuitable for high power consumption devicesoverload protectionIndicates correct groundingSafe for children
Original part number NKZ-0448 Product name Natec RHINO External USB 3.0 enclosure for 3.5" SATA HDDs, black aluminum Producer Natec Class of product USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station interface USB 3.0 Device size 3.5 inches Device interface SATA Supported devices Hard disk Supported operation systems Windows 2000/XP/Vista/7/8 Power supply AC Adapter Width 187 mm Height 31.5 mm Depth 117 mm Net weight 660 g Additional information aluminum case provides very good heat dissipation and drive protectionoption of setting case up horizontally or standing it verticallyhigh data transfer speed (up to 5 Gbps)suitable for most 3.5" SATA hard drivesUSB cable lenght: 60 cmpowered by AC Adapter (included)
Original part number A-DPM-VGAF-02 Product name Gembird adapter displayport 1.1->VGA, on cable, black Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA Female Plug 2 type Display Port plug Other information Other information Colour Black Additional information Interface: DisplayPort v.1.1aVideo resolution: up to 1920 x 1200 x 60 Hz and 1080pPower consumption: 400 mW active mode, 15 mW in standby modeDimensions: 41 x 22 x 14 mmNet weight: 8 g
- Raises your screen to eye level to prevent neck strain- Supports up to a 21” flat panel monitor or a maximum weight of 10kgs- Includes three different height positions: 100mm, 115mm & 130mmFIRAFIRA International is an Independent Ergonomic Consultancy.This product is accredited to EU Health and Safety Legislation*.*BS EN ISO 9241/1995/Part 5; EC Directive 290/90/EEC & amends 2002Maksimaalne kaal (mahutavus)10 kgMaksimaalne ekraanisuuruse sobivus53,3 cm (21")Toetatud ekraanide arv1Kõrguse reguleerimineJahKõrguse reguleerimise ulatus100 - 130 mmToote värvMustMaterjalPlastLaius477 mmSügavus330 mmKõrgus103 mmKaal720 gEkraani suuruse ühilduvus21Pakendi mõõtmed (l x s x k)482 x 104 x 332 mm
Mini HDMI Extender Set, Full HD, 50m, Cat6/6A/7, Strom via Micro USB Kabel, schwarz, Verlängert die maximale Länge für HDMI-Kabel auf bis zu 50 m wobei nur ein einfaches Netzwerkkabel zwischen einer Sende- und einer ...
Product kirjeldus: Club3D SenseVision Connect USB C 3.2 Gen1 universaalne Triple 4K Charging Dock - dokkimisjaam - USB-C 3.2 - HDMI, DP - GigE Product Type: dokkimisjaam Docking liides: USB-C 3.2 Video liidesed: HDMI, DP mõõtmed (WxDxH): 25 cm x 8.3 cm x 3.4 cm kaal: 399 g võrguseadeing: Gigabit Ethernet Power: Power adapter AC 100/240 V
Drive Cabinet Type: External Internal Data liides1Cabinet Material: Aluminium/plastik Mounting Capability1(Micro USB); External värv: must Drive Cabinet Features12.5 mm sügavus (mm): 130 mm Nominal kaal: 0.075 kg Package Type18 kg Pack kaal Netto (kg): 0.189 kg Pieces in pack: 1Box kaal Brutto (kg): 8.15 kg Retail Packaging Netokaal Carton: 0.189 kg Retail Packaging Netokaal Plastic: 0.189 kg Packs in Box: 401
