Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 30 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
The Neomounts by Newstar desk mount, model FPMA-D860DBLACK is a tilt-, swivel and rotatable desk mount for two flat screens up to 27?. This mount is a great choice for space saving placement on desks. Neomounts by Newstar's versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 24 to 47 centimetres. Depth 5 centimetres. Neomounts by Newstar FPMA-D860DBLACK has one pivot point and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 7 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 27" - Desk mount: Desk clamp & grommet - Depth: 5 cm - Height:24 - 47 cm - Tilt:20° - Rotation: 360° - Swivel: 20°
DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
The universal table mount allows you to mount two monitors vertically, one above the other. Suitable for monitors (curved screen) up to 32 cm / max. 8 kg. Quick release closure function - allows you to quickly attach and remove monitors Ergonomically perfect adjustment of the monitor position to the user's height Monitors can be tilted, tilted, swiveled and height-adjusted Monitor arm: tilt: -45°/+45°, slide: -45°/+45°, front panel rotation: -180°/+180° Integrated cable management solution: for an organized and tidy workspace
ROG Aura Monitor Light Bar ALB01 pakub ekraani kohal paigaldatavat valgustuslahendust, mis vähendab silmade koormust ja tagab ergonoomilise töö keskkonna. Selle kohandatav valgus võimaldab reguleerida heleduse ja värvitemperatuuri taset, et sobituda erinevate keskkondade ja tegevustega. Monitori valgusriba kinnitub magnetiliselt monitori ülaosale ja pakub ASUS Aura Sync RGB valgustust, mis täiendab mänguriruumi stiili. • Kohandatav heledus ja värvitemperatuur • Magnetiline kinnitus monitori ülaosale • ASUS Aura Sync RGB valgustus • Silmade koormust vähendav valgustus
SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
IB-1919M-C42 M.2 NVMe Enclosure via USB4 High-Speed Performance with USB4: Experience data transfer speeds of up to 40 Gbit/s with the IB-1919M-C42, perfect for transferring large files, editing high-resolution videos, and accessing complex datasets with ease. Toolless Installation: Enjoy effortless setup with a toolless design, allowing you to quickly install your M.2 NVMe SSD without any tools. Just slide your SSD in, secure it, and connectit's that easy! Robust Aluminium Housing: The premium aluminum construction offers excellent durability and protection for your SSD, while effectively dissipating heat to maintain optimal performance during extended use. Wide Variety of SSD Compatibility: Designed to accommodate 22x 30/42/60/80 mm SSDs, this enclosure ensures versatility and secure fit for various sizes without needing multiple enclosures. Multi-OS Compatibility: Provides consistent performance with Windows and macOS, making it a reliable solution for connecting different M.2 NVMe SSDs across platforms. Connect to PC via USB4 Type-C: Includes two cablesone for PC connection and one for powerproviding convenience and versatility for your setup.
Enhance your viewing experience with the ART UM-115 mounting kit. Designed for LCD and LED displays ranging from 13" to 32", this mounting solution offers rotation and tilt adjustments, allowing users to find their perfect viewing angle with ease. The integrated cable management system keeps cables neatly organized, ensuring a clean and clutter-free environment. Constructed from durable metal and finished with a sleek powder coating, the UM-115 is built for longevity. It supports up to 9 kg and comes with all necessary installation hardware, including screws and a gas spring lift for easy height adjustment. Whether for home or office use, this mounting kit provides a reliable and stylish solution for mounting your display.
VSM653 double swivel wall arm for 49-65 inch screens The VSM653 double swivel wall arm is dedicated to larger screens with a diagonal of 49 to 65. The design is adapted to frequent changes in monitor position, so it is an ideal solution for places where monitors often change their position. This holder is made of aluminum arms with cables inside, which ensures tidy installation and aesthetic appearance. VSM653 allows you to rotate the screen right and left by 90° and tilt the screen by +11°, which allows you to adjust the screen position to the user's expectations and increases the comfort of use.
The Gembird Cablexpert A-CM-VGAF-01 is a versatile video adapter designed for delivering high-quality visuals. With a maximum output resolution of 1920 x 1080 at a refresh rate of 60 Hz, this adapter ensures smooth image performance for presentations, gaming, or any display needs. The USB-C male connector easily connects to devices, while the female 15 pin HD D-Sub (HD-15) connector accommodates various monitors and projectors, making it an ideal choice for home and professional use. Supporting DisplayPort Alternate Mode, this adapter allows for efficient video output without compromising on quality. Its Plug-and-Play functionality means users can set up in moments without the need for additional software, and with compliance to ISO 9002 and RoHS standards, it meets essential safety and environmental criteria. Experience seamless connectivity with the Gembird Cablexpert adapter, formulated for everyday use.
The Gembird Cablexpert Premium 1.5M USB-C Cable offers reliable connectivity for devices requiring fast charging and data transfer. Capable of delivering up to 60 W at 3 A, this cable is ideal for power-hungry devices, ensuring they remain charged while in use. The flexible silicone jacket provides durability and protection against wear and tear, making it suitable for both home and travel use.With a data transfer rate of 480 Mbps, the Cablexpert Premium cable allows quick file transfers, keeping productivity levels high. Its molded design ensures longevity, providing a stable connection with both male-to-male USB-C connectors, making it compatible with most modern devices. This cable is a choice for those who need efficiency and reliability in their charging and data transfer needs.
The Gembird MA-DA2-05 is a versatile monitor mount or stand designed to support monitors up to 32 inches in diagonal size. Finished in a sleek grey color, it seamlessly integrates into any desk setup. Despite its lightweight design, weighing just 3850 grams, it can support a maximum weight of up to 18 kilograms, ensuring stability and security for your monitor. The product dimensions, with a gross depth of 460 mm and a height of 100 mm, make it a compact yet sturdy choice for optimizing desk space and improving your viewing angle.
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
High quality monitor or laptop stand by Maclean is designed for monitors with a screen diagonal from 13 to 32" and weighing up to 20 kg. The stand allows the screen to be raised to eye level, creating a comfortable and healthy working environment.
PE25 2.5Gbps PCI Express network card Speed up to 2.5Gbps Wake-On-LAN and RealWow support Low profile and full height brackets Windows 10/8.1/8/7, Windows Servers 2003/2008/2012, and Linux
USB 2.0 A-plug to Micro B-plug 6ft cable, bulk package USB 2.0 cable for modern electronic devices with compact Micro USB 5 pin male connector Gold-plated contacts suitable for USB 2.0 high-speed data transfer
Original part number PC-186-VDE-10M Product name Gembird power cord with VDE approval 10 meters Producer Gembird Class of product Cables - others Wire type Power cable 16A/230V Plug 1 type EURO plug (16A) Plug 2 type IEC320 C13 Colour Black Length 10 m Additional information Wires: profile area 1,00 sq.mm
Original part number Y-A025CGY Product name Unitek Adapter USB type-C - USB 3.0,Y-A025CGY Producer Unitek Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type USB 3.1 Type-C (male) Plug 2 type USB 3.0 Other information Other information Colour Silver Additional information Hot Swap, Plug&Play; Adapter USB 3.0 to USB3.1 Typu C
DisplayPort adapter cable, DP - HDMI type A, M/F, 0.15m,w/interlock, DP 1.2 compatible, UL, CE, blThis HD video and digital audio cable suits ideal to connect a Notebook or Computer with DP interface to a HDMI Monitor, Beamer, LCD/TFT Monitor, LED or Plasma TV with a HDMI cable, for example.Pistmik 1DPPistmik 2HDMASuguSisestatav konnektor/sisekonnektorPistmik(ud)4Pistmikukontaktide kateKuldToote värvMustMaterjalPlastKaabli pikkus0,15 mSertifikaatUL20276TäisdupleksJahMaksimaalne resolutsioon1920 x 1080 pikslitIsehäälestuvJahPakendi tüüpVillKaablid kaasa arvatudDisplayPortKaasnevate toodete arv2 tkKaabli tüüpAWG 28Ühendumine PC-gaJahMac-ühilduvusJah
- Connector with ceramic ferrule- Halogen free cable- Fiber class OS 1- Cable diameter 3MM- Single packed, with test reportPistmik 1LCPistmik 2LCSuguSisestatav konnektor/sisestatav konnektorSüdamiku läbimõõt9 µmKaitsekihi läbimõõt125 µmToote värvKollaneTäisdupleksJahKaabli pikkus5 mPistmik(ud)2 x LC
Original part number IUH3F56 Product name HUB I-BOX USB 3.0 Black 4-PORTS SLIM Producer IBOX Class of product USB hub Number of ports 4 Supported USB standards USB 3.0 Maximal external transmission speed 5 Gb/s Additional information Plug and play, hot swap Width 42 mm Height 12 mm Depth 77 mm More info
The HX Monitor Arm is the perfect accessory to add flexibility and superior ergonomics to your monitor or TV. The HX features a new post design, frees up space and allows positioning of your display for greater productivity.Sleek and streamlined, it accommodates large monitors weighing up to 42 lbs (19 kg). Extension/retraction motion and height adjustment capability promote user comfort.- Increases viewing comfort: Helps reduce eye, back and neck strain- Sleek new post design- Patented CF motion technology provides premium ease-of-use display adjustment- Cable management feature routes cables tightly under the arm and through the extension, out of the way- Eliminates scrolling: Rotate screen for portrait viewing of photos and documents- Rotation-stop on base limits range to 180° and prevents monitor from making contact with wall- Folding arm frees up space in constrained areas- Upgrade this arm with the HX Triple Bow Kit to create a triple monitor arm- Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free height adjustmentMaksimaalne kaal (mahutavus)19 kgMaksimaalne ekraanisuuruse sobivus106,7 cm (42")SobilikTVPaigaldussüsteemi ühilduvus (min)75 x 75 mmPaigaldussüsteemi ühilduvus (max)400 x 400 mmToetatud ekraanide arv1PaigaldusBolt-throughVESA-paigaldusliidesed75 x 75,100 x 100,200 x 100,200 x 200,400 x 200,400 x 400,400 x 300 mmKaldenurk-75 - 75°Liikumisulatus-180 - 180°Rotatsiooni nurk360°Toote värvValgePakendi laius305 mmPakendi sügavus488 mmPakendi kõrgus178 mmPakendi kaal8,3 kg
Dimensions: 135 x 85 x 16 mm Weight: 78 Accessories included: - IB-233U3-B- Silicon protective case- USB cable- User manual Other features: - Plug & Play:- Transmission speed: USB 3.0 to 5 Gbit/s- External data interface: USB 3.0 with UASP- Power connection: USB
