Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
15cm USB-C to DisplayPort 4K adapter USB Type C male to DisplayPort female adapter cable For connecting a DisplayPort display to a USB Type-C video source (e.g. smartphone or laptop) Works on any device that supports DisplayPort Alternate Mode (Alt Mode) Supports 4K UHD resolutions at 60 Hz
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 2 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
ROG Strix Arion is an SSD enclosure that fits an M.2 PCIe NVM Express SSD with a 2230/2242/2260/2280 form factor and features USB-C 3.2 Gen 2 connectivity to deliver data transfer speeds of up to 10 Gbps. Its sleek aluminum alloy case features thermal pads for excellent heat dissipation, exclusive ASUS Aura Sync lighting effects, and a protective holder with an R-hook that altogether make ROG Strix Arion a high-performance, mobile storage solution.
The DIGITUS DA-71156 storage enclosure offers a reliable solution for expanding storage capacity with support for M.2 SSDs. Utilizing a compact design with a length of 25 cm, this external enclosure is crafted from aluminum, ensuring durability and efficient heat dissipation. With a data transfer rate of up to 10 Gbps for NVMe drives and 6 Gbps for SATA drives, it efficiently handles large files while maintaining optimal performance. An LED indicator provides visual feedback on operational status, making it user-friendly.
Adjustable desk holder with monitor arm and notebook stand. The monitor holder with a notebook shelf is mounted on the desk. Position your screen perfectly to reduce neck and eye strain. Thanks to the holder, you will save space on your desk. The arms swivel, extend and retract, and tilt to change the reading angle. Allows displays to be rotated from landscape to portrait mode, etc. Allows easy, ergonomic positioning to reduce workload. Works with almost any LCD monitor (max. 27") and supports notebooks up to 17.3" VESA compatibility: 75 x 75, 100 x 100 mm Strong desk clamp or grommet for easy and secure attachment to your desk Built-in cable management for an organized and tidy workspace Surface finish: powder coating Fit Screen Size: 17"~32" Load capacity: 8 kg (per arm) Tilt range: +90° ~ -30° Rotation range: +90° ~ -90° Screen rotation: +180° ~ -180° Installation: Desk clamp or grommet Max. Desk Thickness: Clamp: 10 ~ 80mm, Grommet: 10 ~ 40mm Cable Management: Yes
The AXAGON PCES-SA4X4 PCI-Express controller extends your desktop PC with four SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low-profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 /2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 4 GB/s bidirectional. Output: 4x independent Serial ATA port, SATA III 6G standard. 4x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Port Multiplier Command Based Switching feature support. Boot support from connected disk incl. cooperation with computer motherboard BIOS / UEFI. 4x LED to indicate connected disks activity. Four 2-pin sockets for connecting the HDD LEDs of the computer case. The ASMedia ASM1164 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and above. Package contains: PCI-Express controller with standard bracket, low profile bracket, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The Mercusys MA530 V1 network adapter enhances connectivity and performance for your computer setup. Designed with functionality and convenience in mind, this external, nano-sized Bluetooth adapter integrates seamlessly into any USB 2.0 port without obstructing other connections. Equipped with Bluetooth 5.3 standard, it ensures faster data transfer speeds, extended range up to 20 m in open space, and reliable performance across a broad range of Bluetooth devices. Suitable for home or office use, the MA530 V1 operates efficiently in diverse environmental conditions, supporting humidity ranges from 10 - 90% (non-condensing) and temperatures from 0°C to 40°C. Experience enhanced connectivity with the Mercusys MA530 V1.
The Neomounts by Newstar FPMA-D550DD3BLACK is a full motion desk stand for three flat screens up to 27" with a maximum weight capacity of 7 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Additionally, the mount features height adjustment (0-43,2 cm), to create the perfect work situation. The smart cable management clips ensure orderly routing of the cables. Additionally, the mount features an Easy-release VESA, that allows you to (de)attach the monitors in a wink of an eye. The FPMA-D550DD3BLACK is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Deviant hole patterns can be covered using one of Neomounts by Newstar's VESA adapter plates.
Personal Data GuardianThe Natec Owl Privacy Filter is an unassuming overlay for your computer or laptop screen that plays a crucial role in safeguarding personal data and confidential information. It is available in a variety of sizes: 13.3", 14", 15.6", 16", 17.3", 21.5", 23.8", 24", and 27".Take care of your data securityKey FeaturesOperationThe filter is constructed with 10 layers and utilizes micro-louver technology that prevents anyone viewing the screen from the side from seeing its content. Even at a slight angle, the image becomes sufficiently darkened and distorted to hinder data readability, and from 30 degrees, the screen appears completely black.Eye ProtectionThe Natec Owl privacy filter not only safeguards confidential data but also protects your eyes. Spending hours in front of a screen exposes you to harmful radiation; the filter limits its penetration, and its anti-glare properties further reduce eye strain.Additional FeaturesSafe ScreenMade from durable material, the privacy filter also protects your screen from dirt, scratches, and minimizes smudges and fingerprints. It preserves the touch functionality of your display.Easy InstallationEquipped with clips that attach to the monitor frame, the filter can be easily and quickly applied or removed at any timeideal for moments when you want to share your screen's content. For a more discreet, invisible option, transparent adhesive strips can be applied directly to the screen.
STRIMER WIRELESS 24P L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
Neomounts CL35-340BL12. Maksimaalne kaal (mahutavus): 50 kg, Ekraani minimaalne suurus: 58,4 cm (23"), Ekraani maksimaalne suurus: 106,7 cm (42"), Paigaldussüsteemi ühilduvus (min): 100 x 100 mm, Paigaldussüsteemi ...
Neomounts CL35-340BL22. Ekraani minimaalne suurus: 58,4 cm (23"), Ekraani maksimaalne suurus: 106,7 cm (42"), Paigaldussüsteemi ühilduvus (min): 100 x 100 mm, Paigaldussüsteemi ühilduvus (max): 200 x 200 mm. Kõrguse ...
Pixel A4 Laminator Stylish laminator for a variety of laminating applications in the home or small office Fast heat-up time. Ready to go in 3-minutes 80 & 125 micron laminating capability for added versatility Release trigger for retrieving and re-aligning misfed documents Auto-shut off after 30 minutes inactivity Includes a starter kit for 10 documents
BenQ Ergo Arm BDH01. Paigaldus: Klamber/kaitsekrae, Maksimaalne kaal (mahutavus): 40 kg, Ekraani minimaalne suurus: 43,2 cm (17"), Ekraani maksimaalne suurus: 88,9 cm (35"), Paigaldussüsteemi ühilduvus (min): 75 x 75 mm, ...
Neomounts AV80-500BL. Toote tüüp: Videobaari kinnitus, Kinnituse tüüp: Põrand, VESA-paigaldusliidesed: 200 x 200,200 x 300,200 x 400,300 x 900,300 x 100,300 x 200,300 x 300,350 x 350,400 x 200,400 x.... Laius: 900 mm, Sügavus: 362 ...
F-GT PRO sõidupingi kinnitus; Käigukangi ja käsipiduri hoidik; Saab paigaldada nii vasakule kui ka paremale küljele; Eelnevalt puuritud augud muuhulgas Thrustmasteri ja Moza jaoks
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.