The Gembird DD-U3M2 SSD docking station offers a streamlined way to connect M.2 drives to your computer. With its USB-C to USB-A cable and accompanying dongle, this docking station ensures compatibility with various devices while maintaining a tidy setup. Designed for hot-swap capabilities, it allows users to easily access their SSDs without needing to power down, providing flexibility in data management.Featuring a data transfer rate of 10 Gbit/s, the DD-U3M2 enhances productivity with rapid file transfers. The inclusion of UASP transfer protocol and TRIM support further optimizes performance, making this docking station a valuable addition to any workflow. With compliance to several standards including ISO 9002 and RoHS, it upholds quality and environmental safety.
The AXAGON PCEU-430RS PCI-Express card adds four external USB-A 5Gbps ports to your desktop computer. The card is designed for fast data transfers at speeds up to 5 Gb/s. All four USB ports are taken out to the bracket. You can connect four different USB devices such as printers, keyboards, card readers, flash drives, external HDDs, etc. Reliable power supply of the card is provided from the computer power supply via the SATA power connector. The controller is equipped with a renowned Renesas company chipset with proven seamless compatibility and UASP support. Input: PCI-Express 2.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.1. / 3.0 / 4.0. Number of 1-Lane lines (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 2.0 bus up to 5 Gb/s. Input (power supply): SATA 15-pin male power connector. Output: 4x external USB 5Gbps port with USB A-F connectors. USB 5Gbps interface - before USB 3.2 Gen 1 / USB 3.0. Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1. Supports transmission rates 5000 / 480 / 12 / 1.5 Mb/s. When connected to a PCI-Express bus version 1.0, theor. transmission rate max. 2500 Mb/s. Other features: Full Plug and Play support. Supports concurrent activity of SuperSpeed USB, USB 2.0 and USB 1.1 devices. Compliant with the final official xHCI specification revision 1.0 by USB-IF. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Fully supports Hot Plug connecting and disconnecting of USB devices while running. Internal SATA power connector for powering the controller from the PC power supply. Renesas PD720201 chipset is used. Supported operating systems: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.31 and above. Note: Drivers are only installed for Windows XP / Vista / 7. For Linux, Windows 8 / 8.1 / 10, Server 2012 / 2016 / 2019 / 2022 and later versions, no external drivers are required, they are already part of the operating system. Package contains: PCI-Express card with a standard bracket, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.
The Lenovo 2-in-1 Laptop Stand was designed to solve two frustrating distractions in one: laptop overheating and painfully poor ergonomics. The sturdy, non-slip stand allows you to ergonomically angle your laptop and phone to prevent aches and tension, while ventilation holes improve your laptop’s cooling performance.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
DST-Micro 140, USB-C Laptop Micro Docking Station with 4K Support & 1.4m 60W Charging Cable 4k HDMI, PD 3.0 60W, USB 3.2 Gen 1, SD & microSD - Adds 2 USB Type A ports (5Gbps), an HDMI port and an SD card reader to your notebook - Integrated 1.4m USB Type C cable for convenient and flexible laptop charging - Supports HDMI resolution up to Ultra HD 4K 30Hz - Allows USB Power Delivery (3.0 up to 60W) to charge the laptop while using the DST-Micro 140.
Messgerät für GPU-Stromverbrauch, 3x 8-Pin PCIe auf 1x 12VHPWR (reverse), integriertes OLED-Display, Messung der Leistungsaufnahme, Aufzeichnung des Stromverbrauchs, optimierte Kabelführung
USB Type-C to Triple DisplayPort™ MST Hub 4K60Hz. The CSV-1553 is a MST hub to DisplayPort™. This USB-C MST hub is designed to cater for your most versatile connectivity demands, such as Mobile Phone, Tablet, laptop, etc. with a USB Type-C output which supports DP™ Alt-Mode as Host to 3 DisplayPort ports with Ultra High Definition support. It supports DP2.1 AltMode and will allow you to output one Display with max capability of a single 8K30Hz or dual displays of 8K30Hz + 4K144Hz support or triple displays of 4K60Hz Each. It supports on all DisplayPort Alternate Mode supported USB Type-C or Thunderbolt4 compatible devices. Give your Phone, Ultrabook more displays. Phones, Ultrabooks and notebooks are increasingly becoming more powerful and smaller in the physical form factor. With a single USB Type-C DisplayPort Supported port available you can now drive up to 3x Displayport™ screen simultaneously . All it needs is a free USB Type-C with DP™ Alt-Mode on your Phone, Laptop or Ultrabook to connect to the MST hub and will provide you with unparalleled connection options for Triple 4K60Hz displays. The setup is easy and simple to do, provided your system supports this function.
The Club 3D CAC-1572 Thunderbolt cable offers performance with compliance to multiple standards including USB4, Thunderbolt 3, Thunderbolt 4, and DisplayPort 2.1. This bidirectional cable features a 24 pin USB-C connector on both ends, ensuring compatibility across a range of devices. Utilize this technology to achieve a transfer rate of up to 80 Gbps, enabling rapid data transfer and seamless connectivity.Designed with high-quality materials, the cable jacket is constructed from thermoplastic elastomer (TPE), providing durability and flexibility. With support for resolutions such as 16K at 60Hz, 4K at 540Hz, and 8K at 240Hz, this cable is equipped to handle high-resolution content with ease. Additionally, it supports USB Power Delivery of 240W, making it a choice for powering devices while maintaining high-speed data transfer efficiency.
Duracell Procell Intense batteries are the industrial standard for duracell reinforced alkaline batteries.Procell Alkaline Intense Power 9V industrial batteries are specially designed to last longer (compared to normal Duracell Procell Alkaline 9V batteries) in professional high-power devices that require high power or pulse operation, such as electronic door locks, soap dispensers or security cameras.These high-quality alkaline batteries are designed for enterprises and designed for the highest loads. They are characterized by high efficiency throughout the life period even in difficult conditions!!
Neomounts DS22-840WH6. Kaabli pikkus: 1,4 m, Toetatud paigutus: Hoonesisene, Pistiku tüüp: Tüüp F. AC-väljundite arv: 3 vahelduvvoolu kontakt. Maksimaalne sisendvõimsus: 20 W. Laius: 58 mm, Sügavus: 95 mm, Kõrgus: 340 mm. Pakendi ...
Experience reliable connectivity with the Ubiquiti UniFi CAT 6a patch cable, designed to facilitate high-performance networking. This thin, shielded cable supports data transfer speeds of up to 10 Gbps, making it suitable for demanding applications. Power over Ethernet (PoE) capability allows for seamless delivery of both data and power, eliminating the need for separate power supplies.Featuring translucent connector boots and a durable braided design, this cable ensures optimal performance while withstanding wear and tear. Compliant with TIA/EIA-568-B.2 and IEEE 802.3bt Type 4 standards, it promises quality and reliability for all your indoor networking needs.
Neomounts CL35-440BL16XL. Maksimaalne kaal (mahutavus): 50 kg, Ekraani minimaalne suurus: 94 cm (37"), Ekraani maksimaalne suurus: 177,8 cm (70"), Paigaldussüsteemi ühilduvus (min): 150 x 200 mm, Paigaldussüsteemi ...
Height-Adjustable Monitor Stand, 17-32", up to 10 kg Position your screen perfectly for an optimal, ergonomic setup Designed for touch-screen monitors: provides a flexible and stable platform for drawing, illustrating, reading, and more Product Features: Height-adjustable monitor stand Easy, stepless height adjustment from 75-325 mm Swivel base and freely tilting design allow easy screen adjustment for better viewing angles and reduced glare Compatible with almost any LCD monitor (max. 32" / 10 kg) Sturdy base plate for secure placement on any desk Built-in cable management system for a clean and organized workspace VESA compatible: up to 100 × 100 mm
• Dual platform support This stand combines a monitor arm and a notebook tray, giving you space for both devices in one setup. It supports monitors up to 32" and 8 kg, and notebooks up to 17.3" and 5 kg • Ergonomic viewing height Adjust your screens to the ideal height and angle for comfortable working. The flexible arms help reduce strain on your neck and shoulders during long hours at the desk • Notebook tray design The open tray provides space for ventilation to keep your notebook cool. Non-slip silicone pads and adjustable claws hold it securely and protect it from scratches • Options for grommet and clamp mounting Whether your desk uses a grommet or a clamp setup, this stand fits easily. It’s suitable for most height-adjustable desks, adding stability without taking extra space • Cable management An integrated cable clip keeps wires neatly arranged along the arms. This helps maintain a tidy and clutter-free workspace • VESA® The stand supports both 75x75 mm and 100x100 mm VESA® plates. This makes it compatible with a wide range of monitors for flexible installation
The Maclean MC-137 mount for three monitors with a diagonal of 17 to 27 inches is a solution designed for people who value order, convenience, and full control over their workspace. It is the perfect choice for gamers, programmers, analysts, and content creators who use multiple screens simultaneously. The design allows for stable mounting of three monitors two on arms with gas springs and one mounted directly to the central pole. This solution combines complete freedom of adjustment with maximum stability and space savings.The two side arms are equipped with gas springs that allow for easy and smooth height adjustment of each monitor. Thanks to them, you can easily raise or lower the screens to suit your preferences. The gas mechanisms keep the monitors stable, eliminating vibrations and ensuring precise positioning. The central screen, mounted on the pole, can also be adjusted to the optimal height during installation, creating a consistent and ergonomic layout of three screens.