110 Ohm digitaalne helikaabel (AES/EBU) suure ristlõikega juhtmetega, sobib DMX- ja helipaigaldisteks pikkadel vahemaadel suurtes ruumides, näiteks lennujaamades, kaubanduskeskustes ja avalikes hoonetes.
Audio digitaalkaabel 110 Ω AES/EBU L.S.Z.H. kattega, sobib DMX- ja ringhäälingurakendusteks, kasutamiseks nii statsionaarsetes kui ka mobiilsetes paigaldustes pikkadel distantsidel. Kaablit kasutatakse digitaalse ja analooghelisignaali edastamiseks salvestusstuudiotes, teatrites, konverentsiruumides, kontsertidel, live-esinemistel ja spordiüritustel.
Bachmann kõrvaldab töökohalt ebamugavad kaablid. Kaablikorraldussüsteem 930.033 cable management võimaldab kaableid töökohal optimaalselt juhtida laua, põrandakasti, seina kanalite ja erinevate seadmete vahel.Bachmann pakub igale olukorrale parimat kaablikorraldussüsteemi. Süsteemid on omavahel ühilduvad, olenemata sellest, kas kaablid kulgevad mööda põrandat või on juhitud põrandalt lauale. Teie käsutuses on hästi läbimõeldud ja integreeritud kaablihalduse kontseptsioon.Lülid on astumiseks ohutud ja purunemiskindlad ning üksteise suhtes liikuvadPistikupesa on paigaldusest sõltumatult maandatud2 ühendusõla jõuülekandeks (sh pöördemomendid ja külgjõud)Eriline geomeetria võimaldab üksikuid kaableid lülide külgedest läbi tõmmatailma purunemise ohuta
45° Mandrel 2 versions for 3-dimensional bending, forTubes with 16 mm Ø The horizontal angle is freely adjustable over 180°. To adjust, loosen the back M4 screws using the included hexagon socket and set the desired angle with the 1° scale. Finally, tighten the screws again.Select the correct version, to correspond with the diameter of your selected tube. Manual
The multi-port USB-C 10Gbps AXAGON HMC-5G21 SPEEDSTER 5in1 hub expands your notebook, computer, or phone with five ports. Connection is made via a 13 cm USB-C cable. This gives you immediate access to a 4K monitor connection and other USB peripherals. It also allows you to power your notebook using Power Delivery technology. Compatibility with Thunderbolt 3/4/5 also provides a simple and compact docking station for laptops like the Apple MacBook Air or Pro. Two USB-A 10Gbps outputs allow connection of external drives, flash drives, mouse, printer, and other USB accessories. USB ports also charge mobile phones and tablets with a current of up to 1.5A. The hub is also equipped with a combined USB-C port that can be used for data transfer (USB 10Gbps) or for charging a notebook using a Power Delivery charger. With a suitable PD charger, you can power not only your notebook but also the hub itself with up to 60W power using Power Delivery 3.0 technology. The HDMI output allows connection of an external monitor, TV, or projector with resolutions up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD, or 1080p/120Hz Full HD and multi-channel audio transmission. For proper video output functionality, the notebook must have a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or a Thunderbolt 3 and higher port. The compact and slim aluminum body not only looks great but also ensures mechanical durability and passive cooling. Youll also appreciate the finely textured surface that resists fingerprints. The USB-C hub is an ideal accessory for laptops without USB-A connectors or video output. This allows you to use your existing USB peripherals without buying new ones. Thanks to Plug and Play and Hot Plug functions, connecting the hub is very simple without complicated installation, and peripherals can be connected or disconnected while the computer is running. The hub can also be connected to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV, or projector to your phone. Input (connection to notebook): USB 10Gbps (USB 3.2 Gen 2), USB-C male connector. Compatible with USB 3.2 Gen 1, USB4, and Thunderbolt 3/4/5. Input (power): USB Power Delivery 3.0 60W port, USB-C female connector. Notebook power via wall adapter through USB-C hub. PD power must be supported by both the notebook (phone) and the charger. USB outputs: 2× USB 10Gbps ports, USB-A female connector. 1× USB 10Gbps port, USB-C female connector. 1× USB 10Gbps port for data transfer or Power Delivery charging, USB-C female connector. The USB-C hub can connect several external drives at the same time. HDMI output: 1× HDMI port, HDMI A female connector. 4K / UHD resolution 4096 × 2160 at up to 30Hz. 2K / QHD resolution 2560 ×1 440 at up to 60Hz. 1080p / FHD resolution 1920 × 1080 at up to 120Hz. Support for the above max resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For video output to work, the hub must be connected to a USB-C port that supports DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port with Thunderbolt 3/4/5 support. A suitable OS is also required. Without this support, the video output will not be available. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. Full HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection) support. Support for up to 8-channel LPCM audio. Support for sampling rates up to 192kHz and up to 24-bit audio depends on the source and destination devices, i.e., notebook/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power-saving mode support. Power via USB bus - bus power, or PD charger. Durable aluminum body for better hub cooling. Blue LED indicates hub connection to the computer (steady light), or brighter when connected to a Power Delivery charger. High-quality shielded cable ensures high communication speed and minimal interference. USB cable length 13 cm. Supported operating systems: Microsoft Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS, and Android. Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated operating systems and also depends on device support (notebook, phone). Proper product functionality may also be affected by graphics card drivers. It is recommended to download the latest drivers.
Product Type Adapter|Colour Black Product Type Adapter Colour Black Shipping box quantity 200 Unit Brutto Volume 0,00021216 cubm Unit Net Weight 0,035 kg Unit Gross Weight 0,045 kg
Original part number A-HDMI-VGA-04 Product name Gembird adapter HDMI-A(M) ->VGA (F), on cable, black Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA Female Plug 2 type HDMI male Other information Other information Colour Black Additional information Output: 1 x VGA DB15 female without nuts, VESA up to WUXGA, 1920 x 1080 at 60 HzInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Cable : 15 cmChipset CH7101Dimensions: 45 x 15 mm x 200 mmNet weight: 36 g
The Neomounts DS70PLUS-450BL1 NEXT Core is a full motion desk mount for curved ultra-wide screens up to 49". The mount features a strengthened head specifically designed for curved ultra-wide screens and to support a higher maximum weight up to 18 kg (curved 14 kg). The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (5,4-49,7 cm), to create the perfect working position. The DS70PLUS-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70PLUS-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
AXAGON STND-LQ on reguleeritav alumiiniumist sülearvuti- ja tahvelarvutialus, mis parandab ergonoomikat ja tagab töö mugavuse. See on ideaalne lahendus 10–16" seadmete jaoks, võimaldades kõrguse ja kaldenurga paindlikku reguleerimist kaela- ja seljalihaste koormuse vähendamiseks. • Sobib seadmetele suurusega 10" – 16" • Kahekordse liigendi mehhanism kõrguse ja nurga reguleerimiseks • Vastupidav alumiiniumist konstruktsioon • Mittelibisev viimistlus kaitseb kriimustuste eest • Kompaktne ja kokkupandav disain
