DVI-D Verlängerung über Cat5 Kabel, Unterstützt eine max. Auflösung von 1920x1200 Pixeln bei einer Distanz von 50m, Unterstützt eine max. Verlängerung von bis zu 70m bei einer Auflösung von 800x600 Pixeln, Keine externe ...
The super speed hub from LogiLink supports the latest USB 3.0 standard with up to 5 Gbps data throughput and extends your USB port with additional 4 ports. It supports also older USB device generations.Portide hulk4Jaoturi liidesedUSB 3.0 (3.1 Gen 1) Type-AUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk4Andmeedastuskiirus5000 Mbit/sIsehäälestuvJahSisendpinge230Väljundvool3,5 AToote värvHall
- Supports up to 36kg or 21” CRT or TFT/LCD monitor- Made from 100% recycled plastic- Height adjustable with three positions 50mm-100mm- Non-skid foot rings ensure stability on any surface- GraphiteRecycled (Plastic)Made from 100% recycled plastic.FIRAFIRA International is an Independent Ergonomic Consultancy.This product is accredited to EU Health and Safety Legislation*.*BS EN ISO 9241/1995/Part 5; EC Directive 290/90/EEC & amends 2002Maksimaalne kaal (mahutavus)36 kgMaksimaalne ekraanisuuruse sobivus53,3 cm (21")Toetatud ekraanide arv1Kõrguse reguleerimineJahKõrguse reguleerimise ulatus50 - 100 mmToote värvGrafiitMaterjalPlastLaius340 mmSügavus340 mmKõrgus102 mmKaal720 g
Tootja: Lanberg Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: HDMI male 2-ühenduse tüüp: D-SUB 15 naissoost värv: must Lisaandmed: Supports only one connection to a VGA monitor, resolutsioon Kuni 1920 x 1200 @ 60 Hz
Warranty: 12 month(s) Gross weight: 0.06 kg Net weight: 0.05 kg Type: Adapter Colour of product: Black Producer product name: 4X90Q93303 USB-C to DisplayPort Connector 1: USB-C male Connector 2: DisplayPort
Tootja: LogiLink Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: SATA seadme suurus: 2.5 tolli seadme liidesed: M.2 NGFF toetatud seadmed: M.2 SSD toiteplokk: USB 3.1 kaabel laius: 106 mm kõrgus: 41 mm sügavus: 12 mm Lisaandmed: Compliant koos USB3.1 Gen2 spetsifikatsioon, data transfer rate Kuni 10 Gbps, Compliant koos PCI Express M.2 spetsifikatsioon 1.0, Backward ühildub USB3.0/2.0/1.1 devices, ühildub B+M Key M.2 NGFF (SATA) SSD 2230 / 2242 / 2260 / 2280 mm, Can be a primary bootable device containing the O/S, (depends on the M.2 SSD ja motherboard BIOS), tugi Windows, MAC OS ja Android (with OTG function), Dimension Lisainfo: andmeleht
Product kirjeldus: Club 3D - network adapter seadme tüüp: Network adapter Form Factor: External liides (Bus) Type: USB 3.2 Gen 1 Ports: 2.5GBase-T mõõtmed (WxDxH): 3.5 cm 1.5 cm pikkus: 24 cm kaal: 39 g Cabling Type: Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T, Ethernet 2.5GBase-T Data Link Protocol: 10Mb LAN, 100Mb LAN, GigE, 2.5 GigE Data Transfer Rate: 2.5 Gbps
Accessories included: Docking Station AC adapter USB 3.0 cable User manual Warranty card Dimensions: 133 x 112 x 75 mm Weight: 0.667 Other features: Transmission speed: 5Gb/s HDD: 2.5" lub 3.5" hard drive 8TB SSD: 2.5" Standard: USB 3.0 Output current: 3 A Input voltage: 12 V Additional information: Offline cloning function
Professional choice DisplayPort 1.2 cable for commercial and high performance AV and IT installations Supports UHD resolutions up to 4096x2160@60Hz 4:4:4 10bit Robust PVC housing, gold plated connectors and contacts Triple shielded cable, corrosion resistant tinned copper 26AWG conductors DisplayPort 1.2 compliant: 3D, 4K, 21.6Gbps; 10 year warranty From the Lines cable connectivity concept developed by Lindy, Anthra Line DisplayPort cables are the professional choice for high performance connections in commercial AV and IT installations. Anthra Line DisplayPort cables are premium connections that feature triple shielded with 26AWG tinned copper conductors for performance and corrosion resistance. High quality gold plated contacts and connectors maintain optimal signal integrity and maximum reliability. UHD resolutions up to 4K 4096x2160@60Hz 4:4:4 10bit, including stereoscopic 3D and HDCP are supported. DisplayPort 1.2 technology ensures compatibility with all DisplayPort enabled devices. Anthra Line DisplayPort cables are available in lengths: 0.5m, 1m, 2m, 3m, 5m, 7.5m and 10m
Kuvab HDMI-signaalid 4 ekraanil üheaegselt ühest allikaseadmest Toetab kuni 4K 60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. Väljavõte digitaalsest ja analoogheli HDMI-st mitte-HDMI võimendite jaoks Omab korralikku lülitit 4K-st 1080p-ni alandamiseks 2-aastane garantii Lindy 4 Port HDMI 2.0 18G Splitter koos heliga on multifunktsionaalne lahendus kvaliteetsete HDMI-signaalide jaotamiseks 4 ekraanile samaaegselt ühest allikaseadmest, eraldades samal ajal eraldi digitaalse või analoogheli. Toetades kuni 4K 60Hz 4:4:4 8bit resolutsiooni, sobib see jaotur suurepäraselt silmatorkavate nelja ekraani digitaalsete siltide loomiseks jaemüügistsenaariumides, spordi näitamiseks mitmel ekraanil spordibaarides või huvitavate mitme ekraani hariduslike esitluste levitamiseks messidel. Jaoturil on ka eraldi optilised ja 3,5 mm audiopordid, mis võimaldavad hõlpsasti HDMI-st heli eraldada, et ühendada mitte-HDMI võimendid või helibaarid, mis on ideaalsed videote toetamiseks koos kaasahaarava mitmekanalilise heliga. Jaoturitel on ka integreeritud lüliti, et vähendada sisendsignaali Full HD-signaaliks, mis muudab vanemate kuvarite paigaldamise muretuteks, tagades samal ajal, et vaataja saab oma kuvarilt alati optimaalse pildi.
50m 4 Port USB 2.0 Cat.5e Extender 50m Extension for 4 USB devices powered over Cat.5/6 cable - Extend 4 USB 2.0 ports up to 50m using low cost Cat5/5e/6 network cable (not included) - Power over Cable requires a single power supply to be connected to the transmitter only - Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed - Plug & Play installation This Lindy USB 2.0 Cat.5 Extender can be used to extend the distance between four USB peripheral devices and the host computer by up to 50m. A standard, low cost Cat.5/5e/6 network cable (not included) is used to bridge the connection between the transmitter and the receiver unit. For best performance and compatibility, we recommend the use of solid core patched cables
Improve the airflow inside your chassis with the Genesis Oxal 120 3-Pack. These powerful fans, also known from the Genesis Irid 505 V2, 503 V2, and 505F, are specifically designed for cases with dense filters, providing significantly better performance than standard solutions. Looking for strong performance as well as low levels of noise? You can rely on it thanks to the fan's high performance, even at low revs, and the reinforced bearing (up to 50,000 hours). And that's not all. EQUIP YOUR CASE WITH GENESIS OXAL 120 3-PACKIntroducing the Genesis Oxal 120 3-Pack - the fans that has been featured in our most efficiently designed product, the Genesis Irid 505F case, placing it at the forefront of the best-ventilated PC cases in journalistic tests. Their high performance is the result of combining a 120 mm diameter with a maximum rotational speed of 1300 RPM, along with high static pressure. This ensures adequate airflow in PC cases that have both standard and thickened filters, which have the primary function of limiting the amount of dust entering the interior. Achieving efficient component cooling has never been easier. HIGH PERFORMANCE EVEN AT LOW REVSThe Genesis Oxal 120 is a low-speed fan, which means that you get standard fan performance comparable to that of a 1400 RPM fan at a much lower RPM. If you're looking for a balance between performance and silence, you can achieve it by adjusting the speed of the Genesis Oxal 120 to a maximum of 80%. Using the maximum revolutions (up to 100%) is recommended for demanding situations, such as overclocked components at the time of their full load. SIMPLE INSTALLATIONThe Genesis Oxal 120 3-Pack are equipped with a 3-pin connector with both male and female plugs. This allows you to connect the fan directly to the motherboard and use it to control the rotational speed based on the current temperature of the processor. But that's not all - the double plug design makes it easy to connect multiple fans together and plug them into a single fan header, making it easier to organize the inside of a PC case.
Slim metal USB-C 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMC-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5 Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones with UCB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9 +, can be connected to the Internet with a network Ethernet cable thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB-C multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Premium connection USB-C USB-C Data and Charging AXAGONBUCM2-CM20AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 2 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Extends an HDMI signal over a distance of up to 70 m in UHD resolution (4K/60 Hz) and offers KVM/USB functionality for the connection of mouse, keyboard and touchscreen.
FPMA-D750BLACK2 Neomounts by Newstar monitor desk mount Neomounts by Newstar Full Motion Desk Mount (clamp & grommet) for 10-32" Monitor Screen, Height Adjustable (gas spring) - Black
The Logitech Strong USB-C cable is a robust and reliable solution for your connectivity needs. Designed with a 3/4" conduit-friendly structure and an aramid-reinforced sheath, it offers durability and ease of installation in various environments. This cable leverages Active Optical Cable (AOC) technology to ensure high-performance data transmission, making it ideal for connecting a wide range of devices with USB 2.0, USB 3.0, and USB 3.1 compatibility. Safety is a priority, and the Logitech Strong USB-C cable meets the IEC 60332-1-2 standard, providing a flame-retardant design for added peace of mind. Whether for professional or personal use, this cable stands out for its quality and safety standards.
