Varia lisaseadmed

võrguseadeing Type: võrguseade Adapter Local Area võrguseade arhitektuur10Base-T liides: USB 3.0 võrguseadeing Form Factor1Data Link Protocol Supports: Gigabit Ethernet LAN kiibistik153 Data Bit Rate: 1000 Mbps võrguseadeing Compliant Standards: IEEE 802.1Q(VLAN), IEEE 802.3, IEEE 802.3ab, IEEE 802.3u USB 3.0: 1(USB 3.0 (type A)) LAN: 1(RJ-45) Requires operatsioonisüsteem: Apple Mac OS, Microsoft Windows Server 2008, Linux, Microsoft Windows Server 2003, Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows XP 64-bit, Microsoft Windows 8, Microsoft Windows Server 2010 External värv: must Package Type1mm kõrgus (mm): 17 mm laius (mm): 25 mm Nominal kaal1Box kaal Brutto (kg): 6.55 kg Retail Packaging Netokaal Carton1

Product kirjeldus: D-Link DUB-M520 - dokkimisjaam - USB-C / Thunderbolt 3 - HDMI - GigE Product Type: dokkimisjaam Docking liides: USB-C / Thunderbolt 3 Video liidesed: HDMI mõõtmed (WxDxH): 10.3 cm x 3.1 cm x 1.1 cm kaal: 49 g värv: Grey võrguseadeing: Gigabit Ethernet

Accessories included: 1x IB-HUB1700-U3, 1x power supply, 1x manual Dimensions: 125x30x20 mm Weight: 0.085

Cable Functionality: USB-C kaabel kaabel tehnoloogia1m Warranty Products Returnable: Jah garantii Term (month)1kg Pack kaal Netto (kg): 0.1kg Pieces in pack: 1Box kaal Brutto (kg): 0.1kg Retail Packaging Netokaal Carton: 0.1kg Retail Packaging Netokaal Plastic: 0.1kg Packs in Box: 1Package Type: Retail1

Cable Functionality: USB-C kaabel kaabel tehnoloogia1m Warranty Products Returnable: Jah garantii Term (month)1kg Pack kaal Netto (kg): 0.1kg Pieces in pack: 1Box kaal Brutto (kg): 0.1kg Retail Packaging Netokaal Carton: 0.1kg Retail Packaging Netokaal Plastic: 0.1kg Packs in Box: 1Package Type: Retail1

kokkusobivus: M.2 2280, ühe ja kahepoolsed M.2 SSD-d

50m 4 Port USB 2.0 Cat.5e Extender 50m Extension for 4 USB devices powered over Cat.5/6 cable - Extend 4 USB 2.0 ports up to 50m using low cost Cat5/5e/6 network cable (not included) - Power over Cable requires a single power supply to be connected to the transmitter only - Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed - Plug & Play installation This Lindy USB 2.0 Cat.5 Extender can be used to extend the distance between four USB peripheral devices and the host computer by up to 50m. A standard, low cost Cat.5/5e/6 network cable (not included) is used to bridge the connection between the transmitter and the receiver unit. For best performance and compatibility, we recommend the use of solid core patched cables

YubiKey 5C Nano USB-C - hardware based authentication solution, USB-C, Passwordless, Strong Two Factor, Strong Multi-Factor, FIDO 2 Certified, FIDO Universal 2nd Factor (U2F) Certified,

GEMBIRD A-USB3C-HDMI-01 USB Type-C to HDMI display adapter space grey

GEMBIRD USB-C to HDMI-male adapter 4K 60Hz 2m black

Ion A3 Laminator • User-friendly A3 laminator for home environments • Laminates documents and photos in 80 - 125 micron pouches • Ready to laminate after 4 minutes warm-up • Release lever disengages pouch for document re- alignment or removal • Sleep mode is activated after 30 minutes • Includes 10-pouch laminating starter kit Model name ION A3 Binding type Plastic comb, Max pouch thickness 125 micron Colour White / Grey

Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF10AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

CABLE USB3.1 5M/43308 LINDY

Axagon kettaboks EE35-GTR ext box USB3.2 Gen1 3.5" HDD SAT

Laadib korraga kuni 6 tahvelarvutit, nutitelefoni ja/või sülearvutit või MacbookiKuni 6 tahvelarvuti, nutitelefoni ja/või sülearvuti või Macbooki samaaegne laadimine kuni 140 W või muude USB-seadmete laadimine.Max. 5V 2,4A laadimine ühe USB A-tüüpi pordi kohta, max. 30W või 140W laadimine USB Type C pordi kohtaToetab USB Power Delivery: 2x PD 3.0 kuni 30W kumbki ja 1x PD 3.1 kuni 140WAku laadimisstandard 1.2 toetab kiirlaadimist, Apple'i laadimisprotokolli, QC 3.0/4.0 ja Samsung AFC toetabLindy 160W 6-pordiline USB-laadimisjaam võimaldab laadida kuni 3 USB-seadet A-tüüpi ja 3 C-tüüpi kaudu, nagu tahvelarvutid, nutitelefonid või sülearvuti või Macbook. Iga USB A-tüüpi port võib pakkuda kuni 5 V 2,4 A, kaks USB C-tüüpi porti võivad pakkuda kuni 30 W kumbki ja üks isegi kuni 140 W, et rahuldada kõige energiamahukamaid seadmeid. Kui kõik 6 porti on hõivatud ja/või kui koguvõimsus on suurem kui 160W, toimub koormuse tasakaalustamine.Tänu nutikale laadimisfunktsioonile ja paljude erinevate protokollide, nagu QC 3.0 ja 4.0 (ainult C-tüüpi porte), Samsung AFC ja Apple 5V 2,4A laadimisprotokolli ning BC 1.2 (ainult A-tüüpi porte) toetusele suudab see USB-laadimisjaam tuvastada ühendatud seadme, et reguleerida automaatselt laadimisvoolu kiire ja turvalise laadimise jaoks.USB Power Delivery Revision 3.1 võimaldab suuremat võimsust kuni 140 W rakendustele, sealhulgas suurematele sülearvutitele, mänguriarvutitele, Macbookidele, tööjaamadele või dokkimisjaamadele. Veel 2 Type C PD 3.0 porti, millest igaüks kuni 30 W võimaldab nutitelefonide ja tahvelarvutite kiiret, paindlikku ja turvalist laadimist.See USB-laadimisjaam pakub ka ülevoolu-, ülepinge- ja lühisekaitseid, et vältida seadme kahjustamist liigse voolu poolt.Plastikust vaheseinad saab kokku panna ja seadme ülaosas seista, mis võimaldab erineva laiusega seadmeid eri suurusega tahvelarvutite või mobiiltelefonide jaoks. See toode sobib ideaalselt kasutamiseks koolides, raamatukogudes, hotellides, restoranides või mis tahes kohas, kus kasutatakse mitut seadet. Laadimisjaama sujuvaks kasutamiseks on kaasas riigispetsiifilised toitekaablid, mis on ideaalsed ülemaailmsete ürituste või välismaal asuvatesse rajatistesse integreerimise jaoks.

The DIGITUS video/audio extender kit is designed to meet the needs of users requiring high-quality, secure, and flexible wireless video and audio transmission. This kit supports 4K resolution and a 30 Hz V-Sync rate, ensuring that your visuals are not only clear but also smooth. With the inclusion of IEEE 802.11ac technology, it offers reliable wireless connectivity up to 30 m, making it ideal for presentations, streaming, and more in large rooms or across different spaces.Security is paramount, and this device delivers by incorporating 128-bit AES, WPA2-Enterprise, and WPA2-PSK encryption algorithms, protecting your data from unauthorized access. The kit comes with a variety of cables and connectors, including USB-A to USB-C, HDMI, and USB-C extension cables, providing you with the flexibility to connect different devices easily. Additionally, its Plug-and-Play functionality, complemented by a LED status indicator, ensures a hassle-free setup, allowing you to get started quickly without the need for complex configuration.

Max. weight 18 kg | Fits screens sized 17-35" | Distance to wall 65 cm | 75 mm x 75 mm | 100 mm x 100 mm | Colour White

Gembird WM-70ST-01 37-70”

Maximise desk space and elevate your monitor to a comfortable viewing height to reduce eye, neck and shoulder strain. Holds large screens weighing up to 22.6kg. 3 different settings to achieve your perfect viewing height. Modern wide screen design, available in black or white. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.

CLUB 3D Thunderbolt 5 sertifitseeritud 8K240Hz andmed 80/120 Gbps EPR 240 Watt kaabel M/M 1 m/3.28 ft

Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Desk arm for two monitors (adjustable), 17\"- 32\" up to 9kg PERFECTLY POSITIONED MONITOR Lightweight and compact design Double arm desk mount for two monitors The arms allow you to swivel, extend, retract or tilt the display and allow you to rotate displays from landscape to portrait mode etc. Durable, sturdy desk clamp for easy and secure fixing on a desk Practical clips to organise cables in the arm Works with almost any LCD monitor (max. 32") Compatible with VESA (100 x 100 mm and 75 x 75 mm)

The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes. In the package you will find a USB-C USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter. The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 480Mbps, USB 5Gbps, USB 20Gbps, USB4 and Thunderbolt 3/4. Device support: 2.5" SSDs/HDDs, 3.5" HDDs, SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD), SATA III - 6 Gb/s (600 MB/s) interface, max. disk capacity - all without limit. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the SATA interface used (theor. 6 Gbit/s). Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Connection via USB 3.2 Gen 2 type C female connector. Cable USB type C male / USB type C male 60 cm long and reduction USB type C female / USB type A male included in the package. Adapter dimensions 14 x 72 x 29 mm (H x W x D). Adapter weight 19 g (without cable, without disk, without adapter). Power supply: Power supply via USB bus up to 900mA from one USB port is sufficient for 2.5" HDD/SSD. To power the adapter with a 3.5" drive, a compact external AC/DC adapter 12V - 2A (24W) with a 150 cm long cable is included. AC adapter dimensions 65 x 65 x 40 mm (including fork). Weight of AC adapter 102 g (incl. power cord). Package contains: USB-C 10 Gbps - SATA adapter, cable USB-C USB-C 60 cm + USB-C -> USB-A reduction, AC adapter 100-240V / 12V-2A

High quality monitor or laptop stand by Maclean is designed for monitors with a screen diagonal from 13 to 32" and weighing up to 20 kg. The stand allows the screen to be raised to eye level, creating a comfortable and healthy working environment.

Floor mat XL PremiumWide range of compatibilityThe Next Level Racing Premium XL floor mat is compatible with all current Next Level Racing cockpits, including Motion Plus, GTRacer Series, Go Kart Plus, Elite Series configurations and various Lite, F-GT and Flight Simulator models. The non-slip backing keeps the mat securely in place during intense racing or flying sessions. Thick premium carpet made from high quality polyester fibre for durability. Reflective logos reflect light for a striking visual effect. Universal fit for all Next Level Racing cockpits, adds a consistent and refined look to your setup.

Option for Models 10" - 17.3" | Colour Metallic

DisplayPort -> HDMI active cable reduction AXAGON RVD-HI20C2 for connecting an HDMI monitor/TV/projector to a computer with a DisplayPort output. A hardware converter with no installation required provides high-quality video output up to 4K/60 Hz Ultra HD. Popular resolutions such as 2K/144 Hz Quad HD or 1080p/240 Hz Full HD are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. The Plug and Play technology, makes it ideal not only for professionals but also for home users who want to easily and efficiently expand their multimedia setup. Enjoy a home cinema experience with stunning 4K visuals, or use the adapter for conferences and presentations. Its perfect for schools and interactive spaces where computers are frequently connected to HDMI devices. Graphic designers and video creators will appreciate the detailed display. The adapter is compatible with monitors from brands such as Dell, HP, Lenovo, ASUS, Samsung, LG, Sony, MSI, and others, ensuring its versatility and reliability. Thanks to HDCP 2.3 support, you can enjoy your favourite streaming services in 4K resolution without restrictions, including Netflix, Disney+, HBO Max, Amazon Prime, and Apple TV+. It also supports lossless audio transmission, best enjoyed on modern TVs. HDCP support must be enabled on all connected devices as well as by the streaming service itself. The video cable is made of high-quality materials, ensuring excellent reliability. The DP connector features safety latches that prevent accidental disconnection. The cable and connectors are protected against bending and breakage. With its 1.8 m length, the adapter ensures a reliable connection even to more distant monitors or projectors. The cable is unidirectional, i.e., it functions as a DisplayPort to HDMI converter, not the other way around. Input (connection to computer): DisplayPort v1.4 DP connector with latch (M) male Connector latch control button Output (connection to monitor / TV / projector): HDMI v2.0b HDMI A (M) male connector The most widely supported resolutions: 4K/60, 30 Hz Ultra HD 2K/144, 120, 100, 60 Hz Quad HD 1080p/240, 144, 120, 100, 75, 60 Hz FullHD Other supported resolutions:The resolution and refresh rate depend on the monitor and graphics card used. max. 4096 x 2160 (17:9) @60Hz DCI 4K 3840 x 2160 (16:9) @60Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @144Hz QHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @240Hz FullHD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: Supports lossless transmission of up to 8-channel audio 192kHz at 24-bit. Supports DDC (Display Data Channel) intelligent adjustment of resolution, frequency, and other parameters based on the source graphics chip. Supported modes: mirroring the desktop (default setting), extension of the primary monitor area. HDR support (High Dynamic Range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running, HDCP 2.3 (8K, 4K, QHD, FullHD) support- backwards compatible with HDCP 2.2 and 1.4. Support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV). Power supply via bus - no external power is needed. Dimensions 9 x 38 x 21 mm (H x B x D). Weight 71 g (incl. cable). Cable length 1.8 m. Supported operating systems: All versions of Windows, macOS, Linux, Chrome OS and other operating systems. It is a pure hardware converter, the transfer is provided only by the cable chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDM video adapter with cable length 1.8 m, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

Connectivity. Charge. StartThis USB-C travel hub lets you equip your laptop with five additional essential ports. This ultra-portable, slim, and compact hub delivers scalable power and plug-and-play connectivity with almost any brand, device, and operating system. Maximize your productivity wherever your work takes you.Small Hub. Big ConnectivityExpand a single USB-C port on your laptop to five ports (USB-C x 2, USB-A x 2, and HDMI) that support multiple devices and one external display up to 4K resolution at 60Hz. Enjoy universal plug-and-play connectivity with almost any brand or device and blazing-fast data transfer speeds of 10Gbps.Scalable PowerThis lightweight and compact hub is not only portable but also technologically advanced. Take one hub on the go to enjoy high-bandwidth connectivity and scalable power from your 65W, 90W, or high-power USB-C power adapter on your laptop, or power the hub from your device's USB-C port.Maximum Compatibility, Minimum ClutterWherever you are in the world, this highly portable, compact hub works with everything you work with. It supports multiple operating systems: Windows, macOS, Chrome OS, iOS, and Android. Connect almost any of your devices and keep your productivity charged whenever and wherever you need it.Designed for Our Shared FutureBesides powering multiple devices, this USB-C travel hub also has the power to help protect our planet. Each hub contains over 80% recycled materials and comes in FSC-certified packaging.

TOSHIBA N300 NAS Hard Drive 6TB SATA 3.5inch 7200rpm 256MB Bulk

Compact aluminum external AXAGON EE25-XA6C ALINE box with USB-C 5Gbps interface for 2.5 SATA HDD or SSD. The double-sided USB-C connector on the box together with the supplied USB-C -> USB-A cable enables a reliable connection to a computer. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSDs. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the external drive. Hibernation support for connected disk and box. Lightweight yet durable aluminum body provides excellent mechanical protection for the drive and ensures efficient heat dissipation. The elegant brushed surface casing offers a sleek look while preventing unwanted fingerprints. Input: USB 5Gbps (USB 3.2 Gen 1), connector USB-C female. Compatible with USB 480Mbps, USB 10Gbps. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" SSD/HDD, max. disk capacity - all without restriction, max. 2.5" disk height 9.5 mm. Other features: Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB-C 3.2 Gen 1 female connector. USB-C / USB-A cable 50 cm long is included. A decent LED indicating the connection to the computer's USB port (permanent light) and data transfer (blinking). Other data: Box dimensions 13 x 129 x 79 mm. Weight 82 g (without cable and disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support.Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB-C 5Gbps external box for 2.5" SATA disk, USB-C - USB-A cable 50 cm long, self-adhesive foam pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box.

Full-motion TV wall mount 37-86" 60 kg UTV-04 Create a true home cinema or a professional conference space with the UTV-04 TV wall mount. This model is built for special tasks designed specifically for the largest and heaviest TVs on the market. It combines uncompromising steel durability with exceptional adjustment flexibility. By choosing the UTV-04, you gain the confidence that your large screen hangs safely while you maintain full control over the viewing angle. Screen Size: 37-86" This mount is dedicated to large displays. It has been engineered to stably support a wide range of sizes from medium 37-inch screens up to massive 86-inch panels. Whether you have a large TV in your living room or a presentation monitor in your office, the UTV-04 provides a solid foundation. Its a long-term investment that will still perform reliably even after upgrading to a newer and larger model. VESA Compatibility The UTV-04 mount offers broad compatibility with the VESA (Video Electronics Standards Association) standard an international specification defining the mounting hole pattern on the back of your TV. Thanks to its well-designed mounting plate, the mount fits most large televisions, supporting hole patterns from 200 × 200 mm up to 600 × 400 mm (commonly used in very large screens). Maximum Load Capacity: 60 kg When it comes to large televisions, safety is absolutely essential. The UTV-04 is a heavy-duty construction with an impressive maximum load capacity of 60 kg. Its exceptional strength comes from reinforced, thickened steel: 2.5 mm for the wall base (ensuring secure anchoring into the wall), 1.8 mm for both the VESA plate and the mount arms (for comparison, standard mounts often use 1.2 mm arms). The entire structure is coated with durable powder paint, providing an elegant black finish and resistance to damage. Tilt Range: +5° ~ -15° Despite its size and lifting capacity, the UTV-04 offers an impressive range of adjustments, allowing you to position the screen with precision. Tilt: Adjustable from +5° to -15°, helping eliminate glare and achieve the perfect viewing angle especially useful when the TV is mounted high on the wall. Swivel: The sturdy, extendable arm allows you to adjust the distance from the wall between 100 mm and 500 mm and rotate the screen 60°. This is ideal for open spaces where you want to watch TV from different areas (e.g., the living room and kitchen). Level Adjustment: The mount includes a 2° screen leveling function. This extremely useful feature lets you perfectly straighten the TV after installation, correcting any minor drilling imperfections. Package Contents Inside the box, youll find a complete installation kit: Reinforced UTV-04 TV mount, A set of screws and wall plugs for various wall types and TV models, A level to help with precise installation, A user manual that guides you step by step through the mounting process.

Der Voyager XP 1470g von Honeywell ist eine solide Lösung für Arbeitsplätze, an denen zuverlässiger 1D- und 2D-Barcode-Scan benötigt wird. Er scannt auch schlecht gedruckte oder beschädigte Barcodes und unterstützt das Scannen von Smartphone-Displays. Damit ist er ein zuverlässiges Arbeitsgerät an Arbeitsplätzen mit hohem Scanaufkommen wie im Einzelhandel oder bei der Zugangskontrolle. Sein Gehäuse ist nach IP52 geschützt und übersteht auch Stürze aus einer Höhe von bis zu 1,8 Metern. Dabei fällt sein Gewicht mit 130 Gramm gering aus, was die Handhabung zusätzlich erleichtert.

3.5 SATA drive case, USB 3.0 black, ALU

EPSON paper matt archival A4 50sh

Turns ‘older’ IDE devices into SATA devices , Allows recent SATA devices to be connected to ‘older’ IDE host controllers , Supports Serial ATA 1.0 interface with data transfer rates up to 150 MBytes/sec , Supports all UDMA-33/66/100/133/150 IDE hard drives and most ATAPI devices, Easy installation, no drivers required ,

CAT5e UTP Patch cord, 0.25 m Perfect connectionFor a reliable connectionGold plated contacts

Original part number PC-186-VDE-10M Product name Gembird power cord with VDE approval 10 meters Producer Gembird Class of product Cables - others Wire type Power cable 16A/230V Plug 1 type EURO plug (16A) Plug 2 type IEC320 C13 Colour Black Length 10 m Additional information Wires: profile area 1,00 sq.mm

GEMBIRD PC-189-VDE-3M power extension cable 3 meter

Product kirjeldus: D-Link DUB H4 - hub - 4 ports seadme tüüp: Hub - 4 ports Subtype: USB Ports: 4 x USB 2.0 mõõtmed (WxDxH): 6.3 cm x 6.3 cm x 1.4 cm kaal: 85 g Localisation: Europe Manufacturer Warranty: 2-year garantii

Gembird voolukaabel 1.8M