Kuvab HDMI-signaalid 4 ekraanil üheaegselt ühest allikaseadmest Toetab kuni 4K 60Hz 4:4:4 resolutsiooni, lisaks toetab HDR-i. Väljavõte digitaalsest ja analoogheli HDMI-st mitte-HDMI võimendite jaoks Omab korralikku lülitit 4K-st 1080p-ni alandamiseks 2-aastane garantii Lindy 4 Port HDMI 2.0 18G Splitter koos heliga on multifunktsionaalne lahendus kvaliteetsete HDMI-signaalide jaotamiseks 4 ekraanile samaaegselt ühest allikaseadmest, eraldades samal ajal eraldi digitaalse või analoogheli. Toetades kuni 4K 60Hz 4:4:4 8bit resolutsiooni, sobib see jaotur suurepäraselt silmatorkavate nelja ekraani digitaalsete siltide loomiseks jaemüügistsenaariumides, spordi näitamiseks mitmel ekraanil spordibaarides või huvitavate mitme ekraani hariduslike esitluste levitamiseks messidel. Jaoturil on ka eraldi optilised ja 3,5 mm audiopordid, mis võimaldavad hõlpsasti HDMI-st heli eraldada, et ühendada mitte-HDMI võimendid või helibaarid, mis on ideaalsed videote toetamiseks koos kaasahaarava mitmekanalilise heliga. Jaoturitel on ka integreeritud lüliti, et vähendada sisendsignaali Full HD-signaaliks, mis muudab vanemate kuvarite paigaldamise muretuteks, tagades samal ajal, et vaataja saab oma kuvarilt alati optimaalse pildi.
USB Type C Port Blockers are useful little devices that system administrators can use to physically prevent access to USB ports. USB Port Blockers allow locks to be inserted and removed from USB ports to stop unauthorized users from inserting pen drives, USB mass storage and mobile devices into shared workstations or devices with USB ports in public spaces.To use, simply attach a lock to the key and insert it into the USB port. Release the sliding mechanism on the key to leave the lock in place. To remove, simply insert the key back into the lock and pull away.
50m 4 Port USB 2.0 Cat.5e Extender 50m Extension for 4 USB devices powered over Cat.5/6 cable - Extend 4 USB 2.0 ports up to 50m using low cost Cat5/5e/6 network cable (not included) - Power over Cable requires a single power supply to be connected to the transmitter only - Supports USB 2.0 High Speed and USB 1.1 Full Speed / Low Speed - Plug & Play installation This Lindy USB 2.0 Cat.5 Extender can be used to extend the distance between four USB peripheral devices and the host computer by up to 50m. A standard, low cost Cat.5/5e/6 network cable (not included) is used to bridge the connection between the transmitter and the receiver unit. For best performance and compatibility, we recommend the use of solid core patched cables
4-port USB type-C hub (1 x USB 3.1 + 3 x USB 2.0) - Best of both worlds: - One fast USB 3.1 (Gen 1) port for fast data connection to e.g. external HDD - Three USB 2.0 ports for connecting standard peripherals (mouse, keyboard, printer, etc) - Windows 11 compatible
Cable adapter USB-C USB-A AXAGON RUCM-AFAC connects existing devices with a USB-A connector to any new device with a modern USB-C interface. Adapter is designed for quick connection of a USB hub or external drive to notebooks equipped with only USB-C connectors. It is also great for connecting a flash drive to a mobile phone with a USB-C connector. It supports data transfer speeds of up to 5 Gb/s and power supplies of up to 3A. The reduction is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference. Connectors: vstup USB-C (M) male. výstup USB-A (F) female. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Cable includes power wires 22AWG, data wires 30AWG.Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Pulldown resistor 5 k. Suitable for notebooks, mobile phones and smartphones, powerbanks, tablets and other mobile devices with USB-C connector. Other data: cable length 0.2 m, 4.2 mm outer diameter. Package contains: USB-C M USB-A F cable adapter, packed in a printed and sealed foil package with hanging hole.
The Axagon CRE-SM3N ID card reader is a secure helper, for example, when logging in to the internet bank and digitally signing documents. It supports ATM/CAC/ID/IC/SIS cards. The ID card reader supports Windows, Linux, macOS and Android operating systems.You can communicate with government agencies, banks, and e-service providers at home or at work without leaving your computer. You can also use an ID card to enter almost all major e-service environments in Estonia, which is the safest and most convenient way to log in. It is no longer necessary to remember different passwords and usernames for different services, an ID card, a card reader, and an ID card PIN code are sufficient.
Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
CABLE HDMI M/M V2.1 40M 8K BLACK OPTICAL AOC LANBERG Optical HDMI cables allow for lossless transmission of audio and video signals over huge distances. Thanks to the use of optical fiber as a conductor, they are extremely thin, which facilitates cable routing, additionally ensuring resistance to electromagnetic interference. The latest HDMI 2.1 (Ultra High Speed) standard allows you to transmit images in 8K quality at a refresh rate of 30 Hz. Using DSC (Display Stream Compression) technology, you can increase the resolution up to a maximum of 10K! ATTENTION Due to its construction, an optical HDMI cable only transmits the image in one direction. Pay attention to the markings on the plugs in order to connect the product correctly.
Elevate your home entertainment system with the Cablexpert AOC Premium Series HDMI cable. Designed to meet the demands of high-definition content, this cable offers 8K60Hz support and Active Optical Cable (AOC) technology, ensuring crystal-clear visuals and vibrant colors. With additional features like 16-bit deep color, EMI/RFI protection, and support for a 21:9 cinema aspect ratio, you're provided a premium viewing experience. The Ultra High Speed HDMI cable with Ethernet allows for seamless integration of audio and video over a single cable, while gold-plated connectors and a durable nylon jacket ensure reliability and longevity. Whether you're watching a blockbuster or streaming high-resolution video, this HDMI cable is the perfect solution for achieving excellent picture and sound quality.
The Neomounts by Newstar desk mount, model FPMA-D860DBLACK is a tilt-, swivel and rotatable desk mount for two flat screens up to 27?. This mount is a great choice for space saving placement on desks. Neomounts by Newstar's versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 24 to 47 centimetres. Depth 5 centimetres. Neomounts by Newstar FPMA-D860DBLACK has one pivot point and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 7 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 27" - Desk mount: Desk clamp & grommet - Depth: 5 cm - Height:24 - 47 cm - Tilt:20° - Rotation: 360° - Swivel: 20°
DS70-250BL2 Neomounts desk monitor arm Neomounts DS70-250BL2 full motion monitor arm desk mount for 17-32" screens - Black The Neomounts DS70-250BL2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
Maximise desk space and elevate your monitor to a comfortable viewing height to reduce eye, neck and shoulder strain. Holds large screens weighing up to 22.6kg. 3 different settings to achieve your perfect viewing height. Modern wide screen design, available in black or white. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.
The AXAGON RSS-CD09 internal frame is designed to be mounted instead of the existing 9.5 mm CD/DVD drive. It is designed for 2.5" SSD/HDD SATA drives. You can easily replace the optical drive in your laptop with a hard drive. The SATA 6G interface allows you to enjoy the speed of modern SSD disks up to 6 Gb/s. Thanks to the absence of complex electronics, it does not slow down the data transfer speed and supports all modern functions such as TRIM. This reduction ensures wide compatibility with various notebook brands. The ODD frame can be set via double switch so it will work with most notebook brands like LENOVO, HP, DELL, ASUS, ACER, SONY, TOSHIBA and others. It is possible to use standard 2.5 SSD disks with a height of 7 mm as well as hard disks with a height of 9.5 mm. The ODD caddy with mounted disk behaves like a standard hard disk in the operating system and in the BIOS (UEFI). By inserting a disk into the adapter, you can easily add an internal 2.5" disk, which can be used to supplement an existing notebook disk.Booting support can significantly speed up older notebooks by adding a 2.5" SSD disk. The unique screwless disk mounting system is secured with a rubber spacer or rubber thread plugs. Rubber insert plugs also help minimize hard drive vibration. Metal springs help fix the adapter in the optical drive bay. The metal frame body is made of aluminum and ensures perfect mechanical protection of the inserted disk. The built-in HQ capacitor helps stabilize the SSD/HDD power supply. Elegant built-in LED indicates disk insertion and data transfer. The package also includes a plastic faceplate (front panel) imitating the front of the optical CD/DVD drive. There are several mounting holes on the back of the reducer to fix in the notebook body. Input: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), 13 pin (7+6) SLIM SATA data and power male connector for notebook connection. Output: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), supports 2.5" SSD/HDD, maximum disk capacity all without limitation, maximum disk height - 9.5 mm, standard 22 pin (7+15) SATA data and power female connector for 2.5" disks. Other features: Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The overall speed depends of inserted disk type and the SATA interface version of the notebook optical drive. It is a pure hardware reduction - for all operating systems, no drivers are installed. Disk boot support in external adapter. Full Plug and Play support. The adapter is powered by a 6-pin Slim SATA power connector. Built-in HQ capacitor for stabilized SSD/HDD power supply. The dimensions of the frame correspond to the slim 5.25" position in the laptop. Aluminum body for disk protection and disk cooling. Other features: Adapter dimensions 128 x 127 x 9.5 mm. Adapter weight 66 g (without faceplate). Notice:The height of the original optical drive must be determined before replacement. RSS-CD09 is designed for a 9.5 mm height. Package contains: ODD adapter for 2.5 SSD/HDD, 4 rubber plugs, plastic pry bar, screwdriver, front panel (faceplate), printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Fast external AXAGON EEM2-20G ARMORED box with USB 20Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find a USB-C -> USB-C cable to connect the box to your computer. Thanks to the USB 20Gbps interface, the transmission rate is up to 20 Gb/s. To take full advantage of the speed of the box, the controller of the connected device must be compatible with USB 3.2 Gen 2x2. These controllers are typically used in gaming laptops and modern desktop computers. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage of the box is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. Vents on the sides ensure sufficient air circulation. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. Another benefit is the silicone sleeve, which provides better protection of the box against shocks, prevents sliding on the table and ensures a comfortable grip in the hand. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female. Compatible with USB 5Gbps, USB 10Gbps. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Maximum theoretical supported speeds and compatibility with USB controllers (ports): Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s. Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s. Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s. Compatible with USB4, Thunderbolt 3/4 ports: max. speed 10 Gbit/s. The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface. Other features: Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. Compliant with USB Mass Storage Class specification. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2x2 type C female connector. USB type C male / USB type C male cable length 38 cm in the package. Other data: Box dimensions 15 x 112 x 40 mm (H x W x D). Box weight 83 g (without cable, without disk, without sleeve). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 20Gbps external box for M.2 SSD, silicone sleeve, USB-C USB-C cable 38 cm long, 1 thermal conductive pad, mounting kit and screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Gaming external AXAGON EEM2-GAM M.2 box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find two cables to connect the box to your computer. One USB-C USB-C and the other USB-C USB-A. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. A great advantage is the screwless opening of the box. Just press the button on the side to release the bottom cover. Changing discs is so easy and fast. The stylish frame for M.2 drives will impress you with its premium gaming design in black with an elegant surface that will perfectly highlight your gaming setup. The RGB LED indication adds a stylish look and blends perfectly with any gaming laptop, further enhancing the atmosphere of your gaming environment. Also included is a functional sleeve that protects the box opening button, increases overall protection, and offers a loop for hanging. Aluminum box body and thermal conductive pad provides ideal cooling for the inserted M.2 SSD. This extends the life of the disk and prevents slowing down of the disk speed, so called. Thermal Throttling. Inserting an M.2 SSD into this box easily creates a fast, compact and versatile external drive that can be used not only with PCs and laptops, but also with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with 480Mbps, USB 5Gbps, USB4 a Thunderbolt 3/4. Device support: NVMe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 disks of these sizes 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB bus up to 900mA from one USB port is sufficient in all cases. RGB LED indication. Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Two USB type C or A male / USB type C male cable length 50 cm included in the package. Other data: Box dimensions 13 x 130 x 55 mm (H x W x D). Box weight 105 g (without cable and M.2 disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, protective sleeve, USB-C - USB-C cable 50 cm long, USB-A - USB-C cable 50 cm long, 2 thermal conductive pads, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA packed in a cardboard box with a hanging hole.
Desk mounted adjustable monitor arm for 3 monitors Position your screen perfectly Lightweight and tilting design Monitor desk mount with single arm for 3 monitors Arm rotates, extends and retracts, tilts to change reading angles Monitor mount bar for side-by-side mounting of 3 monitors Enables easy ergonomic positioning for reduced strain Works with almost any LCD monitor (max. 27") Durable adjustable gas-springs suitable for monitors of 1 - 6 kg Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
The wall mount allows you to individually position 1732" monitors. In addition, the Quick-Release function makes it easy to mount the monitor. The VESA mount is very easy to slide into the appropriate mount and fasten with a screw. Without much effort, you can adjust the monitor according to your needs with the possibility of tilting, tilting or vertical format monitors The use of an integrated gas spring makes it easy to adjust the height of the monitor Do something good for your health by optimally adjusting the monitor to your height and sitting position In addition, monitor cables can be neatly installed in the supplied cable guides Perfect in terms of ergonomics, adjusting the position of the monitor to the height of the user Integrated gas spring for easy height adjustment Monitors can be tilted, tilted, swiveled and height-adjustable VESA mount tilt: 180° (two hinges, each rotated 180°) VESA mount tilt: 70° VESA mount rotation: 360° Maximum height adjustment: 28 cm With Quick-Release function for easy and quick installation For flat and curved displays Integrated cable management system
The AXAGON PCES-SA6 PCI-Express controller extends your desktop PC with six high-speed SATA III ports with a transmission rate up to 6Gb/s. The card equipped with ASMedia chipset not only supports SATA 3.0 specification, but also other SATA technologies such as Hot-Plug, Native Command Queue (NCQ), TRIM, or Port Multiplier. Easy installation without the need to install drivers on most operating systems. Included low profile bracket allow controller installation into standard and also low profile PC cases. Input: PCI-Express 3.0 interface, compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1. Number of 2-Lane (x2) lines, compatible with x4 / x8 / x16 PCIe slots. The bandwidth of 2-Lane PCI-Express 3.0 bus 2 GB/s. Output: 6x independent Serial ATA port, SATA III 6G standard. 6x internal 7-pin SATA data connector. Supports all SATA I / SATA II / SATA III optical drives, SSDs and hard disks of all capacities. Other features: Full Plug and Play support. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with the ATA AHCI (Advanced Host Controller Interface) specification revision 1.4. Fully supports Hot Plug connecting and disconnecting of SATA devices while running. Supports Native Command Queuing (NCQ). TRIM feature support for SSD disks. Supports Port Multiplier Command Based Switching. The ASMedia ASM1166 chipset is used. Supported OS: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32- and 64-bit Windows OS versions), Linux with kernel 2.6.x and later. Package contains: PCI-Express SATA controller, low profile brackets, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
The Neomounts DS75-450BL2 NEXT Core is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 8 kg per screen. The versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screens. Additionally, the mount has gas spring height adjustment (27,7-56 cm) and depth adjustment (0-50,5 cm), to create the perfect working position. The DS75-450BL2 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS75-450BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450WH wall adapter is optionally available.
High quality monitor or laptop stand by Maclean is designed for monitors with a screen diagonal from 13 to 32" and weighing up to 20 kg. The stand allows the screen to be raised to eye level, creating a comfortable and healthy working environment.
The DST Mini is a compact, multifunctional mini docking station. Part of Lindy's expert docking station range, this product is great for those who need a lightweight, portable solution but cannot compromise on functionality. With SuperSpeed USB, 4k capability and pass-through charging, this docking station is a great solution for any hybrid worker. The DST-Mini's USB Type A ports are multifunctional. This means that not only do they support SuperSpeed data transfer, but also USB Battery Charging Specification 1.2 for charging mobile devices and other smaller peripherals, quickly.
The Club 3D CAC-1559 video adapter cable offers connectivity options with performance. Compliant with DisplayPort 2.1 standards, this cable provides a connection between devices with its 24 pin USB-C and 20 pin DisplayPort connectors. The cable supports DisplayPort Alternate Mode, enabling video transmission for resolutions up to 10K at 60 Hz, suitable for both professional and personal use. It features error correction, kink protection, and a transfer rate of up to 80 Gbps to ensure a connection.With support for multiple display resolutions including 8K at 60 Hz and 4K at 240 Hz, this cable is designed to handle the demands of high-definition audio and video experiences. Certified by VESA DP80, it is compatible with a wide range of devices and meets FCC, RoHS, and EMI standards, assuring users of its quality and safety. The bidirectional functionality ensures versatile connectivity, making it an essential tool for anyone seeking high-performance video solutions.
Neomounts CL35-340BL22. Ekraani minimaalne suurus: 58,4 cm (23"), Ekraani maksimaalne suurus: 106,7 cm (42"), Paigaldussüsteemi ühilduvus (min): 100 x 100 mm, Paigaldussüsteemi ühilduvus (max): 200 x 200 mm. Kõrguse ...
