Selle korraliku väikese seadmega saavad süsteemiadministraatorid füüsiliselt takistada kasutajatel ühendamast pliiatsiseadmeid, MP3-mängijaid ja muid USB-massmäluseadmeid oma arvutitega, et andmeid kopeerida, viiruseid sisse viia jne. USB-pordi blokeerija koosneb kombineeritud "võtme" ja "luku" komplektist, mis ühendatakse USB-porti. Kasutamiseks ühendage lihtsalt "klahvilukk" pessa ja vabastage riiv – lukk jääb paigale! Eemaldamiseks ühendage võti lukuga tagasi. Lihtne! Blokeerib füüsiliselt juurdepääsu USB-pordile Kiire ja lihtne kasutada Koosneb 4 lukust ja 1 võtmest Saadaval 5 erinevat värvikoodi versiooni: roosa, roheline, sinine, oranž, valge Iga võti töötab ainult sama värvi lukuga Saadaval ka 10 tk pakendis (ilma võtmeta) Garantii 2 aastat
Travel USB-C 5Gbps hub AXAGON HUE-C1C fast and easy connects up to four USB devices to laptop or computer at the same time. Fixed 19 cm long USB-C cable is ideal for mobile devices users. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The versatility of this compact USB hub is also enhanced by the built-in USB-C connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. Even without an external power supply, the hub can handle the permanent connection of several external drives. The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: USB 5Gbps (USB 3.2 Gen1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0) and USB 1.1. Connecting USB type C male connector on a fixed 19cm long cable. Outputs: 4x USB 5Gbps, USB-A female connector. Supported transmission rates 5.000 / 480 / 12 / 1.5 Mbps. The total bandwidth / transfer rate of the box is given by the used USB 5Gbps interface (theor. up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Decently bright LED indicates the connection of the hub to the computer. Dimensions 106 x 32 x 11 mm. Weight 37 g (incl. cable). USB cable length 19 cm. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 2 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1A in each of the hub ports. The hub power mode via USB + external USB charger (self power): Integrated USB-C connector in the body of the hub for additional power supply of the hub. Any mobile device wall charger (not included) with USB-C connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and later, Android most versions. Package contains: USB-C hub with fixed 19 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
DS70-250BL1 Neomounts desk monitor arm Neomounts DS70-250BL1 full motion monitor arm desk mount for 17-35" screens - Black The Neomounts DS70-250BL1 NEXT Slim is a full motion desk mount designed for screens up to 35", boasting a maximum weight capacity of 9 kg suitable for both flat and curved displays. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
DS70-250BL2 Neomounts desk monitor arm Neomounts DS70-250BL2 full motion monitor arm desk mount for 17-32" screens - Black The Neomounts DS70-250BL2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
ROG Strix Arion is an SSD enclosure that fits an M.2 PCIe NVM Express SSD with a 2230/2242/2260/2280 form factor and features USB-C 3.2 Gen 2 connectivity to deliver data transfer speeds of up to 10 Gbps. Its sleek aluminum alloy case features thermal pads for excellent heat dissipation, exclusive ASUS Aura Sync lighting effects, and a protective holder with an R-hook that altogether make ROG Strix Arion a high-performance, mobile storage solution.
Fast external AXAGON EEM2-UB2 ARROW box with USB 10Gbps interface for M.2 NVMe SSDs. The double-sided USB-C connector on the box enables a reliable connection. In the package you will find an USB-C -> USB-C cable to connect the box to your computer. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. The advantage is the attachment of three different lengths of SSD cards - 42, 60 and 80 mm. M.2 drives can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Opening the box via only one screw makes it easy to mount and dismount the M.2 SSD. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in black colour with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) M.2 SSD disks without a maximum capacity limit. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminium body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 20 cm in the package. Other data: Box dimensions 115 x 39 x 11 mm. Box weight 43 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable 20 cm long, 3 thermal conductive pads, mounting material and a screwdriver, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The Neomounts DS75-450BL2 NEXT Core is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 8 kg per screen. The versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screens. Additionally, the mount has gas spring height adjustment (27,7-56 cm) and depth adjustment (0-50,5 cm), to create the perfect working position. The DS75-450BL2 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS75-450BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450WH wall adapter is optionally available.
The Club 3D CAC-1572 Thunderbolt cable offers performance with compliance to multiple standards including USB4, Thunderbolt 3, Thunderbolt 4, and DisplayPort 2.1. This bidirectional cable features a 24 pin USB-C connector on both ends, ensuring compatibility across a range of devices. Utilize this technology to achieve a transfer rate of up to 80 Gbps, enabling rapid data transfer and seamless connectivity.Designed with high-quality materials, the cable jacket is constructed from thermoplastic elastomer (TPE), providing durability and flexibility. With support for resolutions such as 16K at 60Hz, 4K at 540Hz, and 8K at 240Hz, this cable is equipped to handle high-resolution content with ease. Additionally, it supports USB Power Delivery of 240W, making it a choice for powering devices while maintaining high-speed data transfer efficiency.
PE25 2.5Gbps PCI Express network card Speed up to 2.5Gbps Wake-On-LAN and RealWow support Low profile and full height brackets Windows 10/8.1/8/7, Windows Servers 2003/2008/2012, and Linux
The Club 3D CAC-1188 is a versatile video adapter cable designed to connect Mini DisplayPort devices to HDMI displays. This active adapter supports 8K at 60Hz and 4K at 120Hz, offering vibrant and fluid visuals. Additionally, it supports Dynamic HDR10, which enhances contrast and color accuracy, delivering a satisfying viewing experience.Built with reliable nickel-plated connectors, the CAC-1188 offers durability and consistent performance. The adapter includes a hang box package for easy storage and transport. Compliant with major standards such as FCC, RoHS, and HDCP 2.2, this product meets necessary regulations and assures compatibility across a broad range of devices.
Neomounts CL35-440BL16XL. Maksimaalne kaal (mahutavus): 50 kg, Ekraani minimaalne suurus: 94 cm (37"), Ekraani maksimaalne suurus: 177,8 cm (70"), Paigaldussüsteemi ühilduvus (min): 150 x 200 mm, Paigaldussüsteemi ...
Universal Travel Adapter (EU), 12 W, White Lightweight and easy-to-use design: ideal for travel One-handed operation Universal travel adapter with 3 fast USB charging ports EU Schuko socket supports most EU power plug types USB Type-A charging ports support up to 12 W Includes US/UK/AU/CN power plugs, works in over 200 countries EU Schuko AC socket with child safety shutters Protected by a 10 A fuse (BS1362 compliant, spare fuse included) Note: Does not convert voltage or change mains frequency.
TV wall mount (fixed), 43"-100" Position your screen perfectly Lightweight and flat design Heavy duty steel LCD screen wall mount Supports most 43" - 100" LCD TV's VESA compatible, max. 900 mm x 600 mm Automatic spring locks with quick release cords allow quick and easy TV fixation and removal Practical integrated bubble level for perfect alignment Distance to wall: 30 mm Includes all necessary installation materials
Full-motion TV wall mount 37-86" 60 kg UTV-04 Create a true home cinema or a professional conference space with the UTV-04 TV wall mount. This model is built for special tasks designed specifically for the largest and heaviest TVs on the market. It combines uncompromising steel durability with exceptional adjustment flexibility. By choosing the UTV-04, you gain the confidence that your large screen hangs safely while you maintain full control over the viewing angle. Screen Size: 37-86" This mount is dedicated to large displays. It has been engineered to stably support a wide range of sizes from medium 37-inch screens up to massive 86-inch panels. Whether you have a large TV in your living room or a presentation monitor in your office, the UTV-04 provides a solid foundation. Its a long-term investment that will still perform reliably even after upgrading to a newer and larger model. VESA Compatibility The UTV-04 mount offers broad compatibility with the VESA (Video Electronics Standards Association) standard an international specification defining the mounting hole pattern on the back of your TV. Thanks to its well-designed mounting plate, the mount fits most large televisions, supporting hole patterns from 200 × 200 mm up to 600 × 400 mm (commonly used in very large screens). Maximum Load Capacity: 60 kg When it comes to large televisions, safety is absolutely essential. The UTV-04 is a heavy-duty construction with an impressive maximum load capacity of 60 kg. Its exceptional strength comes from reinforced, thickened steel: 2.5 mm for the wall base (ensuring secure anchoring into the wall), 1.8 mm for both the VESA plate and the mount arms (for comparison, standard mounts often use 1.2 mm arms). The entire structure is coated with durable powder paint, providing an elegant black finish and resistance to damage. Tilt Range: +5° ~ -15° Despite its size and lifting capacity, the UTV-04 offers an impressive range of adjustments, allowing you to position the screen with precision. Tilt: Adjustable from +5° to -15°, helping eliminate glare and achieve the perfect viewing angle especially useful when the TV is mounted high on the wall. Swivel: The sturdy, extendable arm allows you to adjust the distance from the wall between 100 mm and 500 mm and rotate the screen 60°. This is ideal for open spaces where you want to watch TV from different areas (e.g., the living room and kitchen). Level Adjustment: The mount includes a 2° screen leveling function. This extremely useful feature lets you perfectly straighten the TV after installation, correcting any minor drilling imperfections. Package Contents Inside the box, youll find a complete installation kit: Reinforced UTV-04 TV mount, A set of screws and wall plugs for various wall types and TV models, A level to help with precise installation, A user manual that guides you step by step through the mounting process.
The Maclean MC-137 mount for three monitors with a diagonal of 17 to 27 inches is a solution designed for people who value order, convenience, and full control over their workspace. It is the perfect choice for gamers, programmers, analysts, and content creators who use multiple screens simultaneously. The design allows for stable mounting of three monitors two on arms with gas springs and one mounted directly to the central pole. This solution combines complete freedom of adjustment with maximum stability and space savings.The two side arms are equipped with gas springs that allow for easy and smooth height adjustment of each monitor. Thanks to them, you can easily raise or lower the screens to suit your preferences. The gas mechanisms keep the monitors stable, eliminating vibrations and ensuring precise positioning. The central screen, mounted on the pole, can also be adjusted to the optimal height during installation, creating a consistent and ergonomic layout of three screens.
MuuUSB 2.0 Hub 4x USB ports Compliance to USB 2.0 standard LED indicator for Activity Max. data transfer rate: 480 MBit/s 5V/2A USB cable and power supply included No driver installation required Hot Plug / Plug & Play Color: Black
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.
Original part number CCP-MUSB3-AMBM-6 Gembird AM-Micro cable USB 3.0 1.8M Class of product Cables - USB plugs 1x USB 3.01x male micro-USB typ B (5+4-pin) /USB 3.0/ Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Up to 10 times faster than USB 2.0 SuperSpeed: data transfer rate up to 600 MBpsUSB 2.0 & USB 1.1 Backward compatible
USB extension cable, 15 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Premium quality ImageLast laminating pouches for superior laminating results every time, Unique arrow directional quality mark disappears when laminated, Ideal for notices, photos, instructions and frequently handled documents, ...
Original part number A-HDMI-VGA-02 Product name Gembird adaptor HDMI-A(M)->VGA(F) + Audio Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type HDMI male Plug 2 type VGA Female Other information Other information Colour Black Additional information VESA up to WUXGA, 1920 x 1080 at 60 Hz + 3.5 mm stereo jackInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Dimensions: 49 x 23 x 15 mm
