Original part number CC-HDMI-DVI-10 Product name Gembird HDMI to DVI male-male cable with gold-plated connectors, 3m, bulk pack Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type Video HDMI plugs 1x male HDMI A-type (19-pin, Single Link) DVI plugs 1x male DVI-D (Single Link) /18+1/ Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
Docking & Clonstation for M.2 NVMe SSD & 2,5"/3,5" SATA SSD/HDD IB-2914MSCL-C31 NEW AT ICY BOX: The world has waited a long time for this, now it's done: ICY BOX offers the first cloning station for 2.5" and 3.5" hard disks on M.2 NVMe SSD. Ignite the turbo for your system 100% TOOLLESS: Everything is very simple with ICY BOX. The unit is quickly installed with Plug & Play. The storage media are changed very simply and in a flash without tools. That saves time and nerves IGNITE THE DATA TURB: With USB 3.2 Gen 2, data transfer rates of up to 10 Gbit/s can be achieved. So you can take full advantage of the performance of your storage media and benefit from short charging times FLEXIBILITY: The USB 3.2 Gen 2 combo cable has a USB Type-C plug and also has a fixed Type-A adapter. Thus, there is always the possibility to choose the suitable host connection STATUS LEDs: The status LED reliably indicates the current cloning progress from 0% to 100%. In addition, there is a status LED for each drive, which informs about operation and access
Arvutiga töötades tagab õige tool ja õige laud võimalikult ergonoomilise positsiooni. Sama oluline on tegelikult ka monitorijalg, mis võimaldab ekraani tõsta täpselt õigele kõrgusele. See aitab vältida võimalikke kaela- ja seljavalusid. Sobib ekraanidele vahemikus 17 "-32"
StarTech.com USB315CB2M. Kaabli pikkus: 2 m, Pistmik 1: USB C, Pistmik 2: USB B, USB versioon: 3.0 (3.1 Gen 1), Konnektori sugu: Meessoost/meessoost, Maximum data transfer rate: 5000 Mbit/s, Pistmikukontaktide kate: Nikkel, Toote ...
Täielik vene lisatähestik. Kleebised läbipaistva põhja ja punaste sümbolitega.Sobib nii lauaarvutitele kui ka suuremale osale sülearvutitele. Ühe klahvikleebise mõõtmed 12x11mm.
StarTech.com USB3SAB1M. Kaabli pikkus: 1 m, Pistmik 1: USB A, Pistmik 2: USB B, USB versioon: 3.0 (3.1 Gen 1), Konnektori sugu: Meessoost/meessoost, Pistmikukontaktide kate: Nikkel, Toote värv: Sinine
LED suurendav lamp koos aluse ja klambriga, 6 W, must480 lm, 100 mm klaasist lääts, 1,75x suurendus, 3 dioptriat2in1 suurenduslamp, mida saab paigaldada alusega laualambina või klambriga suurendava laualambina.Luuplambi 30 kauakestvat, päevavalgusega tasakaalustatud SMD-LEDi valgustavad objekte värvitult neutraalselt.Tänu kiirkinnitusele saate hõlpsasti ja ilma tööriistadeta vahetada 100 mm läbimõõduga, kvaliteetse klaasist läätse, millel on 3 dioptriat ja 1,75-kordne suurendamine.Paindlik liblikkael koos valgustava suurendusklaasiga on vastavalt vajadusele reguleeritav.Mitmeotstarbeline valgustatud suurendusklaas on kasulik näiteks ilusalongis, lugemisvahendina või täpsustöödel, nagu tikkimine ja jootmine.Sobib ideaalselt laualuubiks, käsitöövalgustiks, laua-, joonistus- või lugemislambiks.Tänu klambri pehmele polsterdusele saab LED-luuplampi turvaliselt ja pinda kahjustamata kinnitada.
Twisted Pair Patch kaabel RJ45 pistikutega Cat.5e U/UTP, PVC Integreeritud lõksuvaba pistikupesa lukustuskaitseks Kullatud tihvtid parema juhtivuse ja signaalikao vältimiseks 10-aastane garantii Cat.5e U/UTP PVC võrgukaabel, mis toetab ribalaiust kuni 100MHz ja millel on snagless disain koos kullatud kontaktidega kuni 1GBase-T ethernet standardite jaoks. Cat.5e kaabel, mis on mõeldud töösagedustele kuni 100MHz. Varjestamata versioon (U/UTP) on oma elektrofüüsikaliste parameetrite (NExT, FExT jne) poolest konstrueeritud nii, et seda saab kasutada Gigabit Ethernet'i jaoks, hoolimata varjestuse puudumisest. Need kaablid on toodetud ja testitud vastavalt ISO/IEC 11801 spetsifikatsioonile. Kaablid on pakendatud ükshaaval polükotti. Kullatud kontaktid tagavad usaldusväärsed ja korrosioonivabad ühendused pika aja jooksul. Vastupidav pingevabastuse konstruktsioon takistab pistiku lukustuse kahjustumist paigaldamise ja eemaldamise ajal.
240W POWER DELIVERY 3.1: UGREEN USB C cable supports up to 240W of power delivery, suitable for the latest high-power charging needs, such as laptops, capable of charging a MacBook Air M3 13" to 88% in 35 minutes. Backward compatible with 140W/100W/87W/65W/45W/30W/20W USB-C charger UNIVERSAL COMPATIBILITY: The USB C to UBS C charger cable is designed to work with a wide range of USB-C devices, including smartphones such as iPhone 15/15 Pro/15 Plus/15 ProMax, Galaxy S24/S23/S22/z fold 5/A35, Pixel 8/7, Moto G Play; laptops such as MacBook Pro 2023/Air, Dell XPS, Surface Laptop 13.5"; tablets such as iPad Air/Pro, Galaxy Tab S9, Surface Pro 9; and various USB-C devices such as Steam Deck ULTRA-DURABLE DESIGN: Engineered with premium nylon braiding and robust aluminum housing, this 240W type c cable is built to withstand over 30,000 bending cycles. The reinforced structure of this 240W usb-c charge cable resists tangles, frays, and everyday wear, making longevity and reliability SUPERIOR E-MARKER CHIP TECHNOLOGY: Equipped with an advanced E-marker chip, this USB C to USB C cable fast charging provides safe and efficient power transmission. It intelligently negotiates power output to match your device's needs, max up to 240W, enhancing compatibility and safety 480MBPS DATA SYNC: Transfer files, photos, and videos at breakneck speeds of up to 480Mbps. This USB-C to USB-C cable makes smooth data syncing between devices without compromising transfer quality or speed, perfect for daily using. [Note: Video output to monitor is not supported]*Function: Charging & Data Sync *USB 2.0 speed up to 480Mbps *Charging Power: 240W (Max) *Wire core: tin-plated oxygen free copper *Multiple internal shielding *Can not transmit audio and video *Aluminum case with braid
Connectivity. Charge. StartThis USB-C travel hub lets you equip your laptop with five additional essential ports. This ultra-portable, slim, and compact hub delivers scalable power and plug-and-play connectivity with almost any brand, device, and operating system. Maximize your productivity wherever your work takes you.Small Hub. Big ConnectivityExpand a single USB-C port on your laptop to five ports (USB-C x 2, USB-A x 2, and HDMI) that support multiple devices and one external display up to 4K resolution at 60Hz. Enjoy universal plug-and-play connectivity with almost any brand or device and blazing-fast data transfer speeds of 10Gbps.Scalable PowerThis lightweight and compact hub is not only portable but also technologically advanced. Take one hub on the go to enjoy high-bandwidth connectivity and scalable power from your 65W, 90W, or high-power USB-C power adapter on your laptop, or power the hub from your device's USB-C port.Maximum Compatibility, Minimum ClutterWherever you are in the world, this highly portable, compact hub works with everything you work with. It supports multiple operating systems: Windows, macOS, Chrome OS, iOS, and Android. Connect almost any of your devices and keep your productivity charged whenever and wherever you need it.Designed for Our Shared FutureBesides powering multiple devices, this USB-C travel hub also has the power to help protect our planet. Each hub contains over 80% recycled materials and comes in FSC-certified packaging.
HP Universal Bond Paper is an economical paper designed for black and colour line drawings. Ideal for technical applications that require high precision and excellent clarity.
StarTech.com 10m, USB2.0 - USB2.0. Kaabli pikkus: 10 m, Pistmik 1: USB A, Pistmik 2: USB A, USB versioon: 2.0, Konnektori sugu: Meessoost/naissoost, Maximum data transfer rate: 480 Mbit/s, Pistmikukontaktide kate: Nikkel, Toote ...
The Gembird Cablexpert power cable is engineered for performance and reliability, designed to suit various power connections. With a power CEE 7/7 connector on one end and a power IEC 60320 C5 connector on the other, this cable provides a secure and efficient solution for your electrical needs. Made with durable PVC jacket material, it ensures longevity and resistance to wear, making it ideal for both home and office use.Rated for a voltage of 250 V and a current of 16 A, this molded power cable adheres to multiple compliance standards, such as VDE and RoHS, ensuring safety and environmental responsibility. Its robust construction ensures stability and efficiency, delivering power effectively wherever it is needed.
HP Everyday Glossy -valokuvapaperi, 100 arkkia/A4/210 x 297 mmTulosta värikkäitä, päivittäisiä valokuvaprojekteja edullisesti käyttämällä kierrätettävää paperia. Tämä kiiltävä paperi kuivuu nopeasti, ja sitä voidaan käyttää minkä tahansa mustesuihkutulostimen kanssa. Muuta otokset kuvakuutioiksi, kalentereiksi ja muuksi käyttämällä HP Photo Creations -ohjelmistoa.
Reinigungsgebläse für elektronische Geräte, 550 Watt Leistung, einstellbare Leistung in zwei Stufen, ergonomisches Design, verschiedene Aufsätze & Bürsten inklusive, Stromversorgung über Steckdose
Original part number A-HDMI-VGA-04 Product name Gembird adapter HDMI-A(M) ->VGA (F), on cable, black Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type VGA Female Plug 2 type HDMI male Other information Other information Colour Black Additional information Output: 1 x VGA DB15 female without nuts, VESA up to WUXGA, 1920 x 1080 at 60 HzInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Cable : 15 cmChipset CH7101Dimensions: 45 x 15 mm x 200 mmNet weight: 36 g
The Neomounts DS70S-950BL1 NEXT One is a full motion desk mount for screens up to 49". The DS70S-950BL1 is a true all-in one solution for small to large displays. The NEXT One features a strengthened head specifically designed to also support curved ultra-wide screens and features a higher maximum weight capacity up to 18 kg (curved 15 kg). The versatile tilt (180°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (20-52 cm) and depth adjustment (8,8-62,5 cm), to create the perfect working position. The DS70S-950BL1 features the nifty 180° stop mechanism, that prevents the mount from making contact with the wall or separation panel when installed near it. The smart cable management system ensures orderly routing of the cables. The black VESA plate of the NEXT One integrate stylishly with the black back of your screen. The DS70S-950BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various optional VESA adapter plates available. The monitor arm is equipped with a Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
DS70-250WH2 Neomounts desk monitor arm Neomounts DS70-250WH2 full motion monitor arm desk mount for 17-32" screens - White The Neomounts DS70-250WH2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
NewStar flat screen desk mount NewStar NM-D775DX3BLACK Full Motion Dual Desk Mount (clamp & grommet) with crossbar and handle for two 17-24" Monitor Screens, Height Adjustable (gas spring) - Black The NewStar NM-D775DX3BLACK is a tilt-, swivel and rotatable desk mount with crossbar and handle for three flat screens up to 24". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars unique tilt (20°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 60 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775DX3BLACK with handle has three pivot points and is suitable for most screens up to 24" (61 cm). The weight capacity of this product is 2 to 18 kg (max. 6 kg each screen). The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
The compact aluminum AXAGON EE35-XA3 ALINE external box with a high-speed USB 3.2 Gen 1 (USB 3.0) interface intended for 3.5" SATA disks. The UASP support allows you to enjoy the most possible speed of modern hard drives. Reading of S.M.A.R.T. information monitoring the condition of the external disk. Supports spinning down of connected disks as well as the box. Durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation. The decently shaped case with a brushed surface that provides elegant look and prevents unwanted fingerprints. Easy mounting of the hard disk as well as automatic installation can be handled even by a layman and easily create an external disk. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB transmission rates up to 5 Gbit/s. Connection via micro USB type B female conector. Device support: SATA II - 3 Gb/s (300 MB/s) interface, Supports 3.5" HDD. Features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Supports 3.5" SATA III / II / I disks of all capacities without limitation. Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the box is determined by the SATA/300 interface used (theor. 3 Gbit/s). Supports UASP (USB Attached SCSI Protocol). SSD/HDD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown support - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Connection via durable large USB 3.2 Gen 1 Type B female connector. An USB-B / USB-A cable 80 cm long is included. A blue, decent LED indicates the connection to the computer's USB port (permanent light) and the data transmission (blinking). The durable box body is a cast aluminum alloy, the box faces are plastic. Simple disk installation - the guides are mounted on the disk, the disk is plugged directly into the SATA connector of the motherboard, and inserted into the box body; the front panel is fastened with two screws using a screwdriver that is included. Compact adapter dimensions 180 x 120 x 32 mm. External box weight 244 g (without cables and disk). Power supply: Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Power switch on the rear panel of the box. AC adapter dimensions 74 x 36 x 91 mm (incl. fork). AC adapter weight 128 g (incl. supply cable). Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 external box for 3.5" SATA disk, USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, mounting strips, screws and the screwdriver, a stand that allows the box to be operated in upright position.
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
