Laiendab DisplayPort 1.4 signaale kuni 20 m kauguseleToetab kuni 3840x2160@144Hz 4:4:4 12bit / 7680x4320@60Hz 4:4:4 8bit resolutsioonidega.Kõrge dünaamilise ulatuse tugi tagab sügavamad mustad, heledamad valged ja laiema värvigamma (HDR10+).Plug and Play paigaldus - draivereid ei ole vaja2-aastane garantiiLindy DisplayPort 1.4 Repeater on aktiivne lahendus kvaliteetse DisplayPort-signaali võimendamiseks kuni 20 m kaugusele, ilma et pildikvaliteet väheneks. Kogege meie repiiteriga uimastavat videokvaliteeti, toetades kuni 8K resolutsiooni 60Hz juures (7680x4320) kuni 10m kaugusele, et saavutada kaasahaarav vaatamiskogemus; alternatiivselt saate nautida sujuvat resolutsiooni kuni 4K (3840x2160) 60Hz juures kuni 20m kaugusele.See USB-C pordiga varustatud korduvkuvar pakub paindlikkust välise toiteühenduse integreerimiseks, kui see on vajalik. Tõsta oma seadistust täiendava toite toega, et tagada sujuv ja katkematu jõudlus.Täiustage oma professionaalseid AV/IT-konfiguratsioone meie korduvkasutajaga, mis on loodud sujuvaks edastamiseks pikemate vahemaade taha ilma signaali halvenemiseta. Nautige suurepärast signaali võimendamist müravabade ja moonutusvabade kogemuste saamiseks. Ühendage DisplayPort (DP) allikaseadmed, näiteks graafikakaardid ja sülearvutid, hõlpsasti DP-ekraanidega üle pikema kaabli pikkuse meie üksikute DP-portide abil.Translated with DeepL.com (free version)
Akasa PROSLIM SATA cables are a perfect cable for system builds with tight fitting environments. Utilising a compact stackable connector, this super flexible cable is neat and manageable.- SATA rev 3.0 transfer rate up to 6Gb/s- backwards compatible with SATA I and II- SATA 7pin to SATA 7pin with securing latchesKaabli tüüpSATA IIIKaabli pikkus0,30 mToote värvMustSuguMale/MalePistmik(ud)7-pin
Cable length: 0.5 Other features: Connectors: USB-A male USB-A male Specification USB 3.0 Maximum data transfer rate: 5 Gb/s Wires material: CU Cable gauge: Data line: 28 AWG Power line: 24 AWG Color: Black Cable lenght: 0,5 m
Saab kasutada toitepikenduskaablina või arvuti/monitori/UPS-i toitejuhtmena IEC C14 kuni IEC C13 Täielikult vormitud VDE heakskiidetud pistikud Värv: sinine 10 aastane garantii Lindy IEC pikenduskaablid sobivad suurepäraselt monitori ja arvuti vahelise kaabli vahemaa pikendamiseks. Need sobivad ka heli- ja valgustoodete jaoks ning sobivad suurepäraselt kodu- ja kontoritoodete jaoks.
USB-C Multiport Adapter (HDMI + Ethernet, PD), valge lisab USB-C seadmele juurde 1xEtherneti, 1xHDMI ja 1xUSB 3.0 ühenduse. Multiport-adapter suunab signaale USB-C -st HDMI, Etherneti ja USB-seadmetesse. Ülikiire võrguühendus sisseehitatud Etherneti pordi (Gigabit) kaudu 5 Gbit/s edastuskiirusega. Lisaks USB A 3.0 pesaga andmete kiireks edastamiseks ja laadimiseks. USB-toite tehnoloogia võimaldab laadida lõppseadmeid pingega kuni 60 W. Seega saab näiteks suuri sülearvuteid, jaotureid või dokkimisjaamu probleemideta laadida. Toetatakse eraldusvõime kuni 4K * 2k @ 30Hz. peegeldab signaale USB-C-lt HDMI-le ja USB-seadmetele toetab HDMI eraldusvõimet kuni 4k x 2k @ 30 Hz USB-C port kiirlaadimiseks PD-ga kuni 60 W kiire võrguühendus sisseehitatud Etherneti pordi kaudu (gigabit) USB-A 3.0 port kiireks andmeedastuseks ja laadimiseks sobib MacBook ja MacBook Pro ning muude USB-C-ühendusega seadmete jaoks
CAT 6 välitingimustes kasutatav RJ45 kaabliühendus (IP68) tolmu- ja veekindel, 2x RJ45 pesaga (8P8C) Kaabliühendus on mõeldud 8-juhtmeliste CAT 6 andmesidekaablite ühendamiseks, pikendamiseks, parandamiseks või ümberpaigutamiseks. Pistikupesa peamine eelis CAT-ühenduskarpide ees on selle õhuke disain. Toote abil saate teostada kaabli pikendusi ka kitsastes ruumides, nt kaablikanalites. Goobay pakub alati teie vajadustele sobivaid tooteid. Lihtsalt. Kõik. Mida te vajate! Varjestatud kaabliühendus (STP) 2x RJ45-pistikutega LAN-kaablite pikendamiseks või ühendamiseks Kaabliühendus välis- ja tööstusrakenduste jaoks pakub kaitset mustuse ja niiskuse eest (kaitseklass IP68). Ühendusmoodul Ethernet-kaablite pikendamiseks ilma terve kaablisegmendi ümberpaigutamiseta Väga õhuke ühendusmoodul veekindla kaablifiltriga Maksimaalne andmeedastus 250 MHz tagab suurepärase võrguühenduse. Sobib lõpetatud ühenduskaablitele, mille kaabli läbimõõt on 4,0 - 8,0 mm Toetab PoE+ rakendusi (IEEE 802.3at)
USB-C to USB-C 2-in-1 Cable and LanyardThis cable is designed for charging and syncing devices with a USB-C port. The cable also functions as a lanyard. This solution allows you to always have your phone at hand (great for walks, travel, shopping, concerts, or work, when you need your phone close but want to keep your hands free). The lanyard attaches through an insert under the case, making it compatible with any phone with a charging port at the bottom of the device. With a 100 cm cable length, the lanyard can be worn around the neck or shoulder, increasing your phone's security against accidental drops or theft. Supports fast charging. The cable is made of the highest quality materials, and the connectors are additionally reinforced. Supports fast charging (Quick Charge). The symmetrical USB Type-C connector allows for double-sided connection to the socket. Universal solution, easy installation Lifetime warranty
FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes
Tootja: Lanberg Tootegrupp: kaablid - muu juhtme tüüp: AUX 1-ühenduse tüüp: 1x male Jack 3,5mm stereo 2-ühenduse tüüp: 1x male Jack 3,5mm stereo värv: sinine pikkus: 1 m
Schuko võrgupistik Clover Leaf IEC C5 pistikupessa Kaabli materjal: H05 VV-F 3G 1,00 100% elektriline ja mehaaniline kontroll VDE poolt heaks kiidetud Värvus: must Täielikult vormitud 10 aastane garantii LINDY toitekaablid sobivad suurepäraselt kasutamiseks professionaalsetes ruumides (salvestusstuudiod, valgussüsteemid ja ka igasuguste ürituste toimumispaigad jne) – aga võid kasutada ka privaatsetes osades.
