SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
CloneStation & DockingStation for M.2 NVME & SATA 2.5/3.5 SSD/HDD IB-2915MSCL-C31 MOUNTING MADE EASY: Experience a new mode in hard drive installation with our tool-free design, allowing for quick and easy installation of 2.5", 3.5" HDD, or M.2 SSD drives. Just plug your drive into the assigned slot and enjoy the smooth copying process. CLONING WITHOUT SOFTWARE: Backing up data has never been easier: With our software-free cloning technology, the process of creating a secure copy of your data has been simplified and streamlined. Offering a more efficient solution. CONNECTION WITH TOP SPEED: With the power of USB 3.2 Gen 2 and the inclusive USB Type-C and Type-A cable, experience data transfer that's not just swift, but impressively efficient, boasting speeds up to 10 Gbit/s. PRECISE CLONING: Benefit from precise duplication. Each bit is replicated from the source drive to the destination as a flawless copy of all data and configurations of the original drive. The process of duplicating data from a durable HDD to a fast SSD, or vice versa, couldn't be more comfortable. BIDIRECTIONAL CLONING: Clone from 2.5"/3.5" SATA HDD/SSD to M.2 PCIe NVMe SSD or do the reverse, all at the push of a button. Allowing for a straightforward data backup or system acceleration process, catering to your specific needs.
The wall mount allows you to individually position 1732" monitors. In addition, the Quick-Release function makes it easy to mount the monitor. The VESA mount is very easy to slide into the appropriate mount and fasten with a screw. Without much effort, you can adjust the monitor according to your needs with the possibility of tilting, tilting or vertical format monitors The use of an integrated gas spring makes it easy to adjust the height of the monitor Do something good for your health by optimally adjusting the monitor to your height and sitting position In addition, monitor cables can be neatly installed in the supplied cable guides Perfect in terms of ergonomics, adjusting the position of the monitor to the height of the user Integrated gas spring for easy height adjustment Monitors can be tilted, tilted, swiveled and height-adjustable VESA mount tilt: 180° (two hinges, each rotated 180°) VESA mount tilt: 70° VESA mount rotation: 360° Maximum height adjustment: 28 cm With Quick-Release function for easy and quick installation For flat and curved displays Integrated cable management system
The Neomounts DS70-810BL1 is a full motion desk mount for one flat screen up to 32" with a maximum weight capacity of 9 kg. The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of your screen. Additionally, the mount features gas spring height adjustment (26,5-55 cm) and depth adjustment (0-49 cm), to create the perfect working position. Additionally, the DS70-810BL1 features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management clips ensure orderly routing of the cables. Due to the short T-Rex® upper arm, only minimal depth is required when placed near a wall or separation panel. This allows the screen to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The DS70-810BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The DS70-810BL1 is equipped with an Quick-release VESA system for easy installation and comes with both desk clamp and grommet.
The Axagon HMC-STND is a versatile stand and USB-C hub specifically designed for laptops and tablets. With its aluminum surface, it combines functionality with modern design. The stand provides a stable base for devices and allows for ergonomic use. The integrated USB-C hub significantly expands connectivity options and supports a wide range of devices. With a maximum resolution of 4096 x 2160 pixels and a refresh rate of up to 200 Hz, the HMC-STND is ideal for high-resolution displays. Support for USB Power Delivery of up to 100 W ensures that your devices can be charged quickly, while the Ethernet LAN function provides a reliable network connection. The HMC-STND is compatible with various operating systems, including Windows, macOS, Linux, Android, and ChromeOS, making it a flexible solution for diverse user needs. Ergonomic stand for laptops and tablets Integrated USB-C hub with 7 ports Maximum resolution of 4096 x 2160 pixels USB Power Delivery up to 100 W Ethernet LAN connection for stable network connections.
The Neomounts FL40-450BL12 is a full-motion pole mount for flat screens up to 42" with a maximum weight capacity of 25kg. The versatile tilt (25°) and swivel (180°) technology allows you to create the optimum viewing angle. The mount can be leveled for the perfect installation. The FL40-450BL12 has a depth of 7.6-32.2cm and is suitable for screens that meet VESA hole pattern 75x75 to 200x200mm. The mount is equipped with a cable management system to secure and route any loose cables.
BenQ ScreenBar® Halo 2 pakub uuenduslikku monitorilambi lahendust, mis vähendab silmade väsimust ja tagab tasakaalustatud valgustuse nii ekraanil kui ka tööpinnal. Lai tagatuli, asümmeetriline esivalgus ja juhtmevaba kontroller loovad mugava töö- ja õpikeskkonna. • tri-zone tagatuli ja asümmeetriline esivalgus • juhtmevaba puuteekraaniga kontroller • sobib kaardus ja õhukestele monitoridele • värvustemperatuur 2700K–6500K • iF Design Award 2025 võitja
HDMI to DVI female-male adapter with gold-plated connectors, bulk packageHigh-Definition Multimedia Interface (HDMI) is the first industry-supported digital audio/video interface.HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.Digital Video Interface (DVI) is a high-quality digital video standard and a part of HDMI interface.
Original part number CCP-USB2-AM5P-6 Product name Gembird USB 2.0 A-plug MINI 5PM 6ft cable, bulk packing Producer Gembird Class of product Cables - USB USB plugs 1x male USB A-type1x male mini-USB CANON-type (5-pin) Cable length 1.8 m
The NewStar desk mount, model FPMA-D960NOTEBOOK is a tilt-, swivel and rotatable desk mount for flat screens up to 27” notebooks up to 22". This mount is a great choice for space saving placement on desks using a desk clamp.NewStar's versatile tilt (180°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 45 centimetres. Depth adjustable from 10 to 43 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy.NewStar FPMA-D960NOTEBOOK has three pivot points and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 10 kg each screen and 15 kg each notebook. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.All installation material is included with the product.Maksimaalne kaal (mahutavus)10 kgMinimaalne ekraanisuuruse sobivus25,4 cm (10")Maksimaalne ekraanisuuruse sobivus68,6 cm (27")Paigaldussüsteemi ühilduvus (min)75 x 75 mmPaigaldussüsteemi ühilduvus (max)100 x 100 mmToetatud ekraanide arv1Kaugus seinast (minimaalne)10 cmKaugus seinast (maksimaalne)43 cmKõrguse reguleerimineJahKõrguse reguleerimise ulatus0 - 450 mmPöördenurk180°Kaldenurk0 - 180°Rotatsiooni nurk360°Toote värvMust
Tootja: Lanberg Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: HDMI male 2-ühenduse tüüp: D-SUB 15 naissoost värv: must Lisaandmed: Supports only one connection to a VGA monitor, resolutsioon Kuni 1920 x 1200 @ 60 Hz
The NewStar KEYB-V200BLACK is a universal mount for keyboards and mice. The product can be installed on an existing wall-, ceiling-, or desk mount that has a VESA hole pattern of 75x75mm or 100x100 mm. Select the wall-, ceiling or desk mount you need and combine it with the KEYB-V200BLACK keyboard and mouse holder. The mount has been arranged both for left - and right-handed users. Any keyboard and mouse can be placed on this bracket. The plate is 65 cm wide and has a depth of 21 cm. The height of the vertical strip is 33 cm. On the back of the vertical strip are holes to organize both monitor and keyboard/mouse cables in a tidy way. Maximum carrying weight is 2 kg. By using an ergonomic keyboard/mouse mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. Screens : 1 Max. weight: 3 kg VESA minimum: 75x75 mm VESA maximum : 100x100 mm Depth: 21 cm Width: 65 cm Height: 33 cm
10 Port USB 3.0 Hub with On/Off Switches Connect up to 10 USB devices - with On/Off switches for each port Allows up to 10 USB 3.0 devices to be connected to a single port On/Off switch on each port allows users to manage power consumption of the connected devices SuperSpeed transfer rates up to 5Gbps, backwards compatible with USB 2.0 / 1.1 36W of power available for devices with large power requirements Product Type USB Hub Dimensions 169.6 x 46.2 x 25mm, Weight 0.042 kg
