Baseus VA1 2-in-1 wheel pump blackThe Baseus multi-functional inflator supports both wireless and wired modes. With its powerful 19-cylinder pump and precise pressure measurement system, it quickly and accurately refills air in tires, balls or inflatable accessories. A built-in LED flashlight, powerbank function and 5 ready-to-use modes make the device perfect for any conditions - travel, camping and emergencies.Inflation in two modesYou can use the device in two ways - wired (via a 12/24 volt cigarette lighter socket) or wirelessly thanks to the built-in 6000 mAh battery. In wireless mode, the pump works for up to 180 days on standby. The design with three ventilation channels prevents overheating even during prolonged operation.Precise and fastThe pump reaches a speed of 20,000 rpm and a pressure of up to 2.5 bar. This allows just 6 minutes to inflate an empty R175 tire. The large LCD display provides an accurate real-time pressure reading with an accuracy of 0.03 bar.5 operating modes and Auto Stop functionThere are five operating modes to choose from. With just one press of a button, you can start pumping. When the device reaches the set value, it will automatically turn off.Flashlight and powerbank in oneThe device features a detachable LED flashlight with three light modes - Emergency lighting, Flashing and SOS. In addition, the pump acts as a powerbank - the USB-A port allows you to charge your devices, and the USB-C port is used to charge the pump itself.Safety of useThe pump is equipped with up to 12 safety features that protect the battery and motor from damage. Among other things, the device protects against overheating, overcharging, too low or high voltage, reverse polarity, short circuit and overload. This allows you to use it without worry.Included:Wheel pumpDetachable LED flashlightPower cord for cigarette lighter socketCharging cableInflation hose with tire tipTip for inflatable wheels and accessoriesTip for Presta valvesNeedle for balls ManufacturerBaseusManufacturer codeC11169001121-00ColorBlackPower supply from cigarette lighterDC 12V⎓6.5A, 24V⎓3.5A (max).USB-C input9V⎓1.5A, 5V⎓2.4AUSB-A output5V⎓2.4A, 9V⎓2A, 12V⎓1.5ARechargeable battery11.1V 2000mAh (22.2Wh)MaterialAluminum, PC, ABSWeightApproximately 700 g
Fanttik X8 Apex Portable CompressorThe Fanttik X8 Apex is a portable compressor designed for precise and instant inflation of tires and other items. It can inflate a tire approximately 26.3" in diameter from 28 to 33 PSI) in just 56 seconds, and has an operating accuracy of ±1 PSI, making it a precise device.High performance and long operating timeThanks to its capacious battery and innovative cooling system, the X8 Apex can run continuously for 40 minutes in typical outdoor conditions, pumping up to 16 tires without cooling breaks. This is ideal for long trips or outdoor work.Simple one-button operationThe unit offers four pre-set pumping modes (bike, motorcycle, car, ball) and three pressure units (PSI, KPA, BAR). Simply select a mode and the compressor automatically stops when the preset pressure is reached, eliminating the need for constant monitoring.Long reach, high resistance hoseThe X8 Apex is equipped with a 5.5-meter long, heat-resistant hose that can easily handle tires up to R22 size at pressures up to 150 PSI. This allows you to inflate tires from any side of the vehicle, even in hard-to-reach places.Additional functions - powerbank and flashlightThe compressor also serves as an emergency power source - it has a USB-C port (Universal Serial Bus Type-C, universal connector for data and power; 5V/3A input) and a USB-A port (Universal Serial Bus Type-A, universal connector for data and power; 5V/2A output) for charging your phone or other mobile devices. An LED (Light Emitting Diode, light emitting diode) flashlight generating continuous and SOS light is placed on top for easy use at night and in emergency situations.Includedportable compressorUSB charging cablehosepumping needleSchrader-Presta valve adapterstorage caseuser manual ManufacturerFanttikModelX8 ApexDimensions200.5 x 63.5 x 63.5 mm (without hose)Pressure range3-150 PSI / 0.2-10.3 BAROperating temperature0°C - 45°CStorage temperature-10°C - 45°CHose length460 mmBattery capacity11.1V / 28.86 WhNoise levelless than 80 dB at a distance of 1 mInput voltage5V/3AOutput voltage5V/2AInput portUSB-COutput portUSB-ACharging time
Fanttik S1 Apex Deluxe Electric ScrewdriverThe Fanttik Fold S1 APEX Deluxe is a versatile electric screwdriver with an intuitive LED display, torque adjustment and four-angle handle adjustment. With 20 S2 bits, a magnetic case and a capacious battery, it is a tool suitable for a variety of assembly and repair tasks.Precise torque adjustmentThe device allows you to set the torque from 0.5 to 7 Nm, selectable in 8 levels via an adjustment ring. The LED (Light Emitting Diode, light emitting diode) display shows the current torque and the battery charge level, providing full control over the working parameters.Foldable handleThe articulating mechanism allows you to set the handle at 0°, 24°, 48° or 72°, which makes it easier to access hard-to-reach places and increases the ergonomics of work. Such a solution reduces hand fatigue during prolonged use.Two speed modesThe screwdriver offers two speed modes - 100 rpm and 250 rpm - selectable by a button on the housing. This makes it possible to adjust the speed to suit the type of screws and materials, preventing damage.Magnetic case and bit setThe set includes 20 of the most commonly used bits made of hardened S2 steel (S2 alloy steel), placed in dedicated locations. The magnetic case protects the tools from getting lost and makes it easy to stay organized.Powerful battery and lightingThe built-in 2,500 mAh lithium-ion rechargeable battery allows for long operation without frequent charging. The USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port is compatible with popular chargers. The integrated LED (Light Emitting Diode, a light-emitting diode) light turns on automatically, making it easier to work in low-light areas.Includedelectric screwdrivermagnetic caseS2 x20 bitsUSB-A to USB-C cableinstruction manual ManufacturerFanttikModelA1 Apex DeluxeDimensions of the screwdriver275 x 50.5 x 48.5 mmTorque0.5-7.0 NmMaximum torque8 NmWeight (with case)1245 gCharging voltage5V/2ARated voltage3.7VBattery capacity2500 mAhSpeed (no load)100 rpm (low), 250 rpm (high)Charging time2-3 h
A universal solution for everyday image and sound transmissionThe adapter guarantees smooth display of content in 4K 3840 × 2160 resolution at 30 Hz, which means very good image quality and high detail on your monitor or television. This resolution makes documents, presentations, photos and videos clearer and more readable. A refresh rate of 30 Hz is perfectly adequate for everyday work, presentations and multimedia viewing. Image and sound are transmitted simultaneously via a single HDMI connection, without the need for additional audio cables. This is a practical solution for the office, home and mobile working.8/10/12-bit colour spaceThe device supports 8-, 10- and 12-bit colour depth, which translates into more accurate colour reproduction and smoother transitions between shades. Higher colour depth allows for a more natural image, especially noticeable on larger screens and when working with video and multimedia content.An excellent choice for anyone who values convenience, quality and functionality in one deviceSimultaneous digital transmission of image and sound via HDMI eliminates the need for additional audio cables. Key features and benefits of the adapter: Compatibility with most mobile devices and smartphones equipped with a port, Stable image and sound transmission, Plug&Play no drivers required, 8/10/12 bit colour depth, Supports resolutions up to 3840 × 2160 at 30 Hz, Aluminium housing ensures high resistance to mechanical damage, Compact format ideal for work and travel. Robust and durable construction Its compact size and light weight make the card extremely practical and convenient, and its light weight allows you to take it literally anywhere, to work, the office or anywhere else on a business trip and beyond. It fits easily in your pocket or rucksack. Made of high-quality durable aluminium, which also helps to dissipate heat and provides effective protection against crushing and damage.Forget about drivers, enjoy full Plug&Play compatibilityThanks to Plug & Play technology, the adapter is ready to use immediately after connection, without the need to install additional drivers or software. Simply connect the USB-C or USB-A connector to start using the device. The adapter automatically recognises the connected equipment and adapts to its configuration, ensuring fast and trouble-free operation.
Strimer Wireless L-Wireless Sync supported (controller required) Highly customizable addressable RGB extension cables Available for motherboard 24-pin, CPU 2×8-pin, GPU 2×8-pin, and GPU 12V-2X6 Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalized light effects Power LED strips directly from the extension cable
Gas Desk Mount for 1 LED/LCD Monitor 17-35" L-29GD ART 2-11kg 2xUSB 3.0 PREMIUM White Maximum mounting hole spacing: 100x100 Vertical adjustment (tilt): -75 to 75 degrees Monitor rotation system: -180° +180°, allows for horizontal or vertical positioning Dual mounting options: both on the edge of a tabletop and in a hole Cable management system: yes Anti-slip lock: yes
ALOGIC ACFS. Paigaldus: Kruvid, Ekraani maksimaalne suurus: 68,6 cm (27"), Paigaldussüsteemi ühilduvus (max): 100 x 100 mm. Kõrguse reguleerimine. Toote värv: Hõbe
• Host interface: USB Type-C • Hub interfaces: 3.5mm, DisplayPort, HDMI, RJ-45, USB 2.0 Type-A, USB 3.2 Gen 1 (3.1 Gen 1) Type-A, USB 3.2 Gen 2 (3.1 Gen 2) Type-A, USB 3.2 Gen 2 (3.1 Gen 2) Type-C • Ports quantity: 14 • 10000 Mbit/s HD type: 4K Ultra HD 120 Hz • USB Power Delivery (USB PD) • Card reader integrated MicroSD (TransFlash), SD • Silver Aluminium
• Maximum weight capacity: 9 kg • Minimum screen size: 43.2 cm (17") Maximum screen size: 81.3 cm (32") • Number of displays supported: 1 • Clamp/Grommet Mounting type: Desk • Maximum VESA mount: 100 x 100 mm • Gas spring Height adjustment Tilt adjustment • Cable management • Aluminium, Plastic, Steel Grey, Silver
• Compatibility: 17–32″ monitors • Capacity: Max load 9 kg • VESA: Up to 100×100; standards compliant • Motion: 360° rotation with tilt/swivel/height adjust • Mechanism: Gas spring for smooth, counterbalanced movement • Mounting: Clamp or grommet • Cable Mgmt: Built-in routing for a tidy setup
Amaze with a single press of a button or via voice control. The electric flip-down TV ceiling mount with remote control, app and voice control from LogiLink is ideal for flat or sloping ceilings at home or in the office. Using the wireless remote control or app, you can programme your preferred viewing angle and quickly and easily adjust your TV to the desired position. Thanks to the stable and powerful motor, movements are smooth and easy to perform.
The LogiLink BP0216 is a professional single-screen mount for table mounting, designed for displays with a diagonal of 17 to 32 inches. The mechanical construction consists of a combination of steel and robust plastic and is certified for a load capacity of up to 10 kg. The system offers a high degree of ergonomic flexibility: a 40.8 cm high guide column allows vertical positioning, while the articulated arm allows a horizontal reach of up to 37.6 cm. For optimal alignment of the field of view, the mount has a tilt range of 45°, a swivel range of 90° and 360° rotation (180°) for pivot operation. Installation can be carried out either with a table clamp (1085 mm) or a tear-through fastening (1045 mm). Integrated cable management and the removable VESA plate support a structured and efficient workplace design.
• Fits most monitors between 13" and 35" • Supports up to 10kg per screen • Cable Management System • Two mounting solutions : Topside Clamp and Grommet
The Triple Racing Monitor Stand Pro Black from Thermaltake offers a complete installation solution for three flat or curved monitors for professional racing gamers. The triple racing monitor stand is constructed of powder-coated steel and has a weight capacity of 60 kg (3 x 20 kg). It supports the mounting of up to three 34" monitors, offering racing gamers the most flexible installation for creating an immersive simulated racing environment. The mount supports the VESA standard sizes of 75 x 75 mm, 100 x 100 mm, 200 x 100 mm, and 200 x 200 mm. The triple racing monitor stand offers a wide range of adjustment options, effortlessly pivoting by 60°, and adjusting the height (920 / 970 / 1020 / 1070 / 1120 mm) to allow gamers to easily find the best viewing position. Type monitor mount Color black EAN 4711658540324 Manufacturer No. GSC-MSP-MDSLBB-01 Made in China For holding/mounting monitors Height adjustable from 920 mm - 970 mm Suitable for flat or curved monitors Max. Screen Size 43 - 140 cm (17 - 55") Material: powder-coated steel VESA standards 75 x 75 mm, 100 x 100 mm, 200 x 100 mm, 200 x 200 mm Ergonomics Swivel ± 60 ° Holder for 3 devices Load capacity 60 kg (3 x 20 kg) Further information Screen size Single monitor 17" ~ 55", Dual monitor 55", Triple monitor 34" Accessories Available Assembly instructions, mounting material Dimensions Width: 221.5 cm x Height: 124 cm x Depth: 63.6 cm
The Triple Racing Monitor Stand Pro Snow from Thermaltake offers a complete installation solution for three flat or curved monitors for professional racing gamers. The triple racing monitor stand is constructed of powder-coated steel and has a weight capacity of 60 kg (3 x 20 kg). It supports the mounting of up to three 34" monitors, offering racing gamers the most flexible installation for creating an immersive simulated racing environment. The mount supports the VESA standard sizes of 75 x 75 mm, 100 x 100 mm, 200 x 100 mm, and 200 x 200 mm. The triple racing monitor stand offers a wide range of adjustment options, effortlessly pivoting by 60°, and adjusting the height (920 / 970 / 1020 / 1070 / 1120 mm) to allow gamers to easily find the best viewing position. Type monitor mount Color white EAN 4711658540331 Manufacturer No. GSC-MSP-MDSLWH-01 Made in China For holding/mounting monitors Height adjustable from 920 mm - 970 mm Suitable for flat or curved monitors Max. Screen Size 43 - 140 cm (17 - 55") Material: powder-coated steel VESA standards 75 x 75 mm, 100 x 100 mm, 200 x 100 mm, 200 x 200 mm Ergonomics Swivel ± 60 ° Holder for 3 devices Load capacity 60 kg (3 x 20 kg) Further information Screen size Single monitor 17" ~ 55", Dual monitor 55", Triple monitor 34" Accessories Available Assembly instructions, mounting material Dimensions Width: 221.5 cm x Height: 124 cm x Depth: 63.6 cm
Der Doppelmonitor-Schwenkarm IB-MS524-T von ICY BOX minimiert mit seinem schlanken und ergonomischen Design den Platzbedarf der Monitore und fördert einen flexibleren und produktiveren Arbeitsplatz. Die Smart Torque Adjust-Funktion ermöglicht die einfache Anpassungen an verschiedene Monitorgewichte, und die hochwertige Gasdruckfeder sorgt für eine sanfte Höhenverstellung. Das integrierte Easy Cable Management führt die Kabel unter dem Arm entlang und vermeidet Unordnung. Das durchdachte Design minimiert Stolpergefahren und verbessert die Ästhetik des Arbeitsplatzes. Der Monitorarm IB-MS524-T verfügt über eine vielseitige Metall-Tischhalterung, die als Klemmhalterung oder Tischdurchführung montierbar ist und sich für dank verstellbarer Klemmhöhe für die meisten Schreibtische eignet. Man braucht übrigens nicht unter den Schreibtisch kriechen, wenn die Klemmhalterung verwendet werden soll, denn die Befestigung erfolgt von der Oberseite des Tisches. Die abnehmbaren VESA-Platten aus hochwertigem Stahl können nach einer einfachen Entriegelung herausgehoben werden, so dass Sie zunächst am Monitor befestigt und anschließend problemlos wieder in den Tragarm eingehakt werden können. Sie unterstützen den 75 x 75mm und den 100 x 100mm VESA-Standard. Hergestellt aus einer robusten Kombination von Stahl, Kunststoff und hochwertigem Aluminium, unterstützt die Monitorhalterung IB-MS524-T sicher zwei Monitore bis zu 32" und 9 kg Gewicht.
• Maximum weight capacity: 12 kg • Minimum screen size: 38.1 cm (15") Maximum screen size: 61 cm (24") Wall • Minimum VESA mount: 75 x 75 mm Maximum VESA mount: 100 x 100 mm • Aluminium, Steel
High Speed HDMI ™ with Ethernet is the latest HDMI supports standard, and the following HDMI Features: - HDCP Compliant - Internet via HDMI (HEC) - Audio return channel (ARC) - 3D playback with a resolution of Up to 1080p - 4x higher resolution than 1080p (max. 4096x2160 at 24Hz) - Supports DSC sYCC601 color and color depths - Deep Color - X.v. Color