Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer. The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Lindy's Active DisplayPort to HDMI cable range combine superior performance with stylish design to provide a high-quality conversion of DisplayPort 4K @ 60 Hz signals to output to a HDMI display or projector. This range of active cables come with an in-built chipset to not only provide a reliable connection, but also enhance compatibility with both dual mode and non-dual mode graphic cards and source devices, perfect for use with DP graphics cards, laptops and PC's, while avoiding the need for additional adapters. With support for resolutions up to 4096 x 2160 @ 60 Hz and with additional support for High Dynamic Range, 4K content can be viewed with crystal clear clarity, enhanced contrast and more lifelike color. These cables are great for creating eye-catching retail displays, innovative working environments or immersive video playback in sports bars and home cinema installations, while support for uncompressed multi-channel audio allows for an impressive three-dimensional surround sound performance to compliment detailed, clear video. Support for AMD Eyefinity technology also brings the user a cost-effective way of creating a non-standard aspect ratio or ultra-high-resolution display made up from up to 3 or more monitors. This feature also allows the user to run multiple applications simultaneously on separate screens, improving productivity in the workplace or creating a widescreen gaming experience.
Unitek HDMI cable 15m 4K 60Hz - transfer the image to the world of details! Get ready for great picture quality with the Unitek 4K 60Hz HDMI cable. The cable has the latest technologies, so the image will look impressive. Thanks to the refresh rate of 60Hz, the cable is perfect for connecting a TV. HDR support With High Dynamic Range (HDR) support, the Unitek C11079BK cable enhances contrast and color depth, highlighting every detail. Thanks to HDR support, you can watch movies and play games in the best quality. Gold-plated plugs Gold-plated plugs ensure excellent connection quality, eliminating interference and ensuring a durable connection. The cable will also be more solid, so it will serve you for a long time. Low losses over long distances The Unitek HDMI cable has been designed to have low signal loss. Thanks to this, the displayed image will be pleasing to the eye even at long distances.
Original part number CCP-MUSB3-AMBM-6 Product name Gembird AM-Micro cable USB 3.0 1.8M Producer Gembird Class of product Cables - USB | FireWire | PS/2 | (e)SATA | ATA Basic information Basic information USB plugs 1x USB 3.01x male micro-USB typ B (5+4-pin) /USB 3.0/ Cable length 1.8 m Other information Other information Gold plated plugs No Cable colour Blue Additional information Up to 10 times faster than USB 2.0 SuperSpeed: data transfer rate up to 600 MBpsUSB 2.0 & USB 1.1 Backward compatible
USB extension cable, 10 ftUSB 2.0 AM to AF extension cableMolded connectors with integrated strain relief30u" gold-plated contacts for reliable high-speed data transfer
Original part number AK-1202-B Product name Lanberg cable management panel type B, 19", 1U, black Producer Lanberg Class of product Component for rack 19"&10" Component for rack 19 Cable management Additional information Cable management panel 1U type BRAL9004 Height 5 cm Width 10 cm Depth 48.5 cm Net weight 0.309 kg Colour Black
This NewStar high quality 1 meter HDMI cable, model HDMI3MM, features 2 HDMI male connectors, providing a direct link between HDMI devices such as Blu-Ray players, HDTVs, DVD Players, stereo receivers and more.NewStar HDMI digital video cables are expertly designed and constructed of only top quality materials to ensure high quality, high definition performance. The HDMI standard combines high bandwidth video and multi-channel digital audio into a single cable, and provides crystal clear image resolution.Our HDMI cables are HDMI specification 1.3b compliant, which fully supports 1080p+ resolutions at up to 120Hz refresh rate with life-like color. Plus, our HDMI cables can support bandwidth up to 340 MHz (10.2 Gbps) and display resolutions of up to 1440p, to support the demands of future high definition devices, such as increased resolutions and higher frame rates.Kaabli pikkus1 mPistmik 1HDMIPistmik 2HDMIKonnektor 1 suguMaleKonnektor 2 suguMaleToote värvMust1. pistmiku kujutegurSirge2. pistmiku kujutegurSirgeHDMI-versioon1.3Andmeedastuskiirus10,2 Gbit/sRibalaius340 MHz
SAVIO CL-75 HDMI v1.4 cable, High Speed, Ethernet, 3D, gold plated plugs, 4Kx2K, 20mExample usage: The cable is capable of transmitting the image, Ethernet signal and audio feedback. From the computer, console, laptop, tuner, DVBT to the screen (eg. TV) at 20m distance without loss in quality of transmitted signal. No additional amplifier required.
Connect a Mini DisplayPort computer to a HDMI 4K display Supports resolutions up to 4K (3840x2160p) at 30Hz For use with Thunderbolt 2 & Mini DisplayPort 1.2 equipped computers Requires DP++/Dual Mode Graphics Card Supports audio 2 years warranty This Mini-DisplayPort 1.2 to HDMI 4K Adapter allows you to connect a Mini DisplayPort 1.2 or Thunderbolt 2 equipped computer to a 4K HDMI monitor, TV or projector. This allows you to use your HDMI display with newer Mini DisplayPort devices. It is ideal for use in established digital entertainment centres, home offices, conference rooms or advertising displays. Please note: For audio output to HDMI your computer must support audio output via DisplayPort. Contact your computer or graphics card manufacturer for further information.
Product kirjeldus: Kensington SmartFit One-Touch Single Monitor Arm - mount (adjustable arm) Product Type: Mount (adjustable arm) - desktop, C-clamp, grommet, desk-mountable Tilt: -90° to 90° Lift: 17 - 50.5 cm Rotation: 180° pöördepea: 180° Adjustments: Height Localisation: Europe Recommended Use: Monitor Recommended Display Size: 13"-32" VESA kinnitusing liides: 100 x 100 mm, 75 x 75 mm Max Load kaal: 9 kg Package Content: Installation tool
The slim USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-F7A with a 1 m long USB cable easily and quickly connects up to seven USB devices to the computer at the same time. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Permanently fixed 1 m long USB-A cable is suitable for use with a desktop computer. The advantage is a separate USB-A port on the front, which is used to connect larger flash disks, readers and other USB devices. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. It can handle the permanent connection of several external drives even without an external power supply to the hub. After connecting the external power supply, it is possible to work with five external disks at the same time. Thanks to the Charging hub function, mobile devices can be charged even without connecting to a computer. An unused charger turns this USB hub into a charging hub for free. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 1 m long cable. Outputs: 7x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Blue LED indicates the connection to the computer's USB port. Dimensions 145 x 42 x 15 mm. Weight 110 g (incl. cable). USB cable length 1 m. The hub power mode via USB cable (bus power): USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. In this power mode, the USB hub is also able to work with up to 3 magnetic 2.5" external disks simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): Integrated micro USB connector for additional powering the hub. Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). In this power mode, the USB hub is able to work with up to 5 magnetic 2.5" external disks. However, for reliable long-term operation of the hub, we recommend connecting a maximum of 3 magnetic external 2.5" drives at the same time. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 5A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connecting to a computer (charging hub): After turning off the connected computer or without connecting to the computer, the hub works with power via a USB charger as a separate charging USB hub, just plug a standard charger with a micro USB connector into the hub (micro USB input). Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 3A at 5V (depending on the capabilities of the external power adapter). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 1 m long USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM10AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 1 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Original part number PC-186A-VDE Product name Gembird power cord 90 degree angled output plug 6ft Producer Gembird Class of product Cables - others Wire type Power cable 10A/230V Plug 1 type EURO Plug (10A) Plug 2 type IEC320 C13 Colour Black Length 1.8 m Additional information Plug at 90 degreesWires: profile area 0.75 sq.mm
Ideal for use with today’s Ultrabooks and thin-and-light laptops, Transcend’s SuperSpeed USB 3.0 Hub transforms a single USB 3.0 port into four, instantly expanding the number of high-performance USB 3.0 devices you can connect to your computer at the same time. With the included power adapter, the Hub3 can supply high output currents of up to 2A via its dedicated fast charging port. This allows the Apple iPad and other portable devices with demanding power requirements to charge much quicker than using a standard USB port.
- Connector with ceramic ferrule- Halogen free cable- Fiber class OS 1- Cable diameter 3MM- Single packed, with test reportPistmik 1LCPistmik 2LCSuguSisestatav konnektor/sisestatav konnektorSüdamiku läbimõõt9 µmKaitsekihi läbimõõt125 µmToote värvKollaneTäisdupleksJahKaabli pikkus5 mPistmik(ud)2 x LC
Original part number EE18-M2S3PCB-01 Product name Gembird adapter card M.2 (NGFF) to mini sata (1.8") Producer Gembird Class of product Others controllers/adapters Bus type SATA III Internal connectors 1 x SATA External ports 1 x M.2 NGFF Low-profile card No Length 106 mm Width 45 mm Net weight 17.5 g Additional information 1,8" Mini SATA adapter card for SSD M.2 (NGFF) driveFully compatible with SATA device interface: SATA 3/2/1M2 (NGFF) SSD supported: 3 cm, 4.2 cm, 6 cm, 8 cm
The NewStar desk mount, model NM-D750DSILVER is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 32”. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars’ unique tilt (180°), rotate (180°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable from 17 to 51 centimetres using a gas spring. Depth adjustable from 0 to 61 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar NM-D750DSILVER has three pivot points and is suitable for screens up to 32" (82 cm). The weight capacity of this product is 9 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
Screen size (max): 27 Load (max): 16 Vertical adjustment: 45 Horizontal adjustment: 45 Dimensions: 480 x 130 x 150 mm Weight: 4.1 Other features: - Pivot: 360°- Integrated cable management system- Maximum weight on the frame: 8 kg
The NewStar desk mount, model NM-D135BLACK is a tilt-, swivel and rotatable desk mount for flat screens up to 30”. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 40 centimetres. Depth adjustable from 4 to 43 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar NM-D135BLACK has three pivot points and is suitable for screens up to 30" (76 cm). The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. Screen size: 10 - 30" Desk mount: Desk clamp & grommet Depth: 4 - 43 cm Height: 0 - 40 cm Tilt: 90° Rotation: 360° Swivel: 180°
The NewStar desk mount, model NM-D135DBLACK is a tilt-, swivel and rotatable desk mount for 2 flat screens up to 27”. This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStar's versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 40 centimetres. Depth adjustable from 4 to 43 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar NM-D135DBLACK has three pivot points and is suitable for screens up to 27" (69 cm). The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. Screen size: 10 - 27" Desk mount: Desk clamp & grommet Depth: 4 - 43 cm Height: 0 - 40 cm Tilt: 90° Rotation: 360° Swivel: 180°
