Monitor stand for 2 monitors (long rectangle) - Position your screen perfectly to reduce neck and eye strain - Monitor/laptop stand - Extra long design provides enough room for 2 monitors - Rectangle shaped design, fits perfectly on any desk
The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable. This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy. You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...). Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body. Input: USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s. Connection via USB type C female connector. Device support: NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm, Supports M-KEY NVMe M.2 SSD disks, NGFF 75-pin M-key slot for NVMe M.2 disks. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning speed up to 1000 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0. Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed). Compliant with PCI Express Base Specification Revision 3.1a. Compliant with NVM Express 1.3 Specification. Compliant with USB Mass Storage Class Specification. The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. SSD boot support. Full Plug and Play support. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable length 25 cm in the package. USB type C male / USB type A male cable length 25 cm in the package. Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table. Docking station dimensions 68 x 68 x 17 mm. Weight 94 g. Power: Power supply using the included external AC/DC adapter 5V - 3A with 150 cm long cable. Power switch. LED indication: 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking). 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light). Supported OS: MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer
IB-2913MCL-C31 Docking and Cloning Station for 2 M.2 NVMe SSDs and Hard Drives Tool-free installation: Experience the new ease of hard drive installation. Whether it's a 2.5-inch, 3.5-inch hard drive or an M.2 SSD: thanks to our innovative design, hard drives are simply inserted into the dedicated slot - no tools are required Data optimally secured: Backing up your data has never been so easy. Our software-free cloning technology makes backups quick and efficient at the touch of a button Precise cloning: every bit is replicated from the source disk to the destination disk as an error-free copy of all the data and configuration of the original disk. Switching from a durable hard drive to a fast SSD and vice versa couldn't be more convenient Unlimited Compatibility: The docking station makes cloning your 2.5-inch/3.5-inch HDD/SSD or M.2 SATA or PCIe NVMe SSD to an M.2 PCIe NVMe SSD a breeze. Experience hassle-free data backup or system acceleration by switching to SSD with the press of a button High data transfer speed: Thanks to USB 3.2 Gen 2 and the included USB Type-C/Type-A cable, you can enjoy not only fast, but also impressively efficient data transfer with transfer rates of up to 10 Gbit/s
Universal external AXAGON EEM2-GTS2 THIN SCREWLESS box with USB 10Gbps interface for M.2 NVMe or SATA SSD disks. The double-sided USB-C connector on the box enables a reliable connection. The package includes not only a USB-C -> USB-C cable for connecting the box to a computer, but also a USB-C -> USB-A adapter. You can connect the box to any free USB port on the notebook. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The external M.2 box also supports other modern features e.g. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about what type of M.2 disk you put in the box. The advantage is the attachment of four different lengths of SSD cards - 30, 42, 60 and 80 mm. M.2 cards can be single-sided or double-sided. The box does not limit the capacity of inserted SSD. Screwless box opening facilitates assembly and disassembly of the M.2 SSD disk. Disk replacement is quick and easy, thus expanding the possibilities of using the box, e.g. for data migration, testing, etc. The outer metal housing is made in grey color with an elegant finish, that prevents unwanted fingerprints. Aluminum box body and thermal conductive pad provides very good M.2 SSD disk cooling. This extends its service life and also prevents the disk from slowing down, so-called Thermal Throttling. By inserting the M.2 SSD in the box, you will easily create fast compact and universal external disk. The box can be used with computers and notebooks, as well as with mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C female. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Supports M.2 drives with a size of 2230, 2242, 2260, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby support - drive asleep after 5 minutes of inactivity. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Heavy-duty aluminum body and thermal conductive pad helps to better cooling the M.2 SSD disk. Higher box surface temperature is not a defect - thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment. Connection via USB 3.2 Gen 2 type C female connector. USB type C male / USB type C male cable 50 cm long and USB type C female / USB type A male adapter are included. Other data: Box dimensions 112 x 40 x 14 mm. Box weight 48 g (without cable and M.2 SSD disk). Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility is dependent on an updated operating system and support from the device manufacturer. Note: when Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer. Package contains: USB-C 10Gbps external box for M.2 SSD, USB-C - USB-C cable, 50 cm long with USB-C - USB-A adapter, 1 thermal conductive pad, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with a hanging hole.
AXAGON STND-LQ on reguleeritav alumiiniumist sülearvuti- ja tahvelarvutialus, mis parandab ergonoomikat ja tagab töö mugavuse. See on ideaalne lahendus 10–16" seadmete jaoks, võimaldades kõrguse ja kaldenurga paindlikku reguleerimist kaela- ja seljalihaste koormuse vähendamiseks. • Sobib seadmetele suurusega 10" – 16" • Kahekordse liigendi mehhanism kõrguse ja nurga reguleerimiseks • Vastupidav alumiiniumist konstruktsioon • Mittelibisev viimistlus kaitseb kriimustuste eest • Kompaktne ja kokkupandav disain
HDMI to DVI male-male cable with gold-plated connectors, 1.8m, bulk packageHigh-Definition Multimedia Interface (HDMI) is the first industry-supported digital audio/video interface.HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.Digital Video interface (DVI) is a high-quality digital video standard and a part of HDMI interface.
High-Definition Multimedia Interface (HDMI) digital audio/video interface cableSupports data transfer bandwidth of up to 10 Gigabits/secAllows bi-directional communication between smart HDMI devicesSupports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 HzSupports HDMI Ethernet Channel 100 Mbps function (HEC)Supports Audio Return Channel technology (HARC)
Original part number CCP-USB2-AMBM-6 Gembird USB 2.0 A- B 1,8m cable black color Class of product Cables - USB plugs 1x male USB A-type1x male USB B-type Cable length 1.8 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information Nickel plated
Original part number CCP-USB2-AM5P-6 Product name Gembird USB 2.0 A-plug MINI 5PM 6ft cable, bulk packing Producer Gembird Class of product Cables - USB USB plugs 1x male USB A-type1x male mini-USB CANON-type (5-pin) Cable length 1.8 m
Original part number CC-DPM-DVIM-6 Product name Gembird cable Displayport (M) - > DVI-D (24+1) 1.8m Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video DisplayPort plugs 1x male DisplayPort DVI plugs 1x male DVI-D (Dual Link) /24+1/ Cable length 1.8 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information Enables to connect a DVI display to a DisplayPort video sourceMax. resolution: 1920 x 1080 pixels
NewStar flat screen desk mount Newstar Full Motion Desk Mount (clamp) for two 17-49" Monitor Screens - Black The NewStar desk mount, model FPMA-D960DVBLACKPLUS is a tilt-, swivel and rotatable desk mount for two screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp. NewStar's versatile tilt (180°), rotate (360°) and swivel (160°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. NewStar FPMA-D960DVBLACKPLUS is suitable for screens up to 49" (124 cm). The weight capacity of this product is 32 kg each screen. This monitor arm is therefore extremely suitable for widescreens and curved screens. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
NewStar flat screen desk mount NewStar NM-D775BLACKPLUS Full Motion Desk Mount (clamp & grommet) for 10-49" Monitor Screens, Height Adjustable (gas spring) - Black The NewStar NM-D775BLACKPLUS is a tilt-, swivel and rotatable desk mount for flat screens up to 49". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars' unique tilt (90°), rotate (180°) and swivel (180°/360°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 59 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775BLACKPLUS has three pivot points and is suitable for screens up to 49" (124 cm). The weight capacity of this product is 1 to 18 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
Stiilne laminaator kodus või väikeses kontoris kasutamiseks. Sobib kasutamiseks kuni 125mic kiledele • Soojenemisaeg: 3min • Ava laius 330mm • Automaatne väljalülitus pärast 30min mittekasutamist • Kaasas 10 lamineerimiskilet • Garantii 2 aastat
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 2 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
DisplayPort -> HDMI active adapter AXAGON RVD-HI14N to connect HDMI monitor/TV/projector to the computer with the DisplayPort output. The smart hardware converter without the need for any installation or setup ensures high-quality transfer of image and sound with a resolution up to 4K/30Hz. Video and audio transfer from a computer or laptop will now be easy. Compact dimensions ensures easy use even in insufficient space. This is a convenient solution if you already own an HDMI cable - you only add a reducer. The adapter is only one-way, i.e. DisplayPort to HDMI, not otherwise. Input: DisplayPort v1.2 DP male connector with latch (M) connector latch control button Output: HDMI v1.4b HDMI A (F) female connector Supported resolutions:Resolution and frequency depend on monitor, graphics adapter and also cable. max. 4096 x 2160 (19:10) @30Hz DCI 4K 3840 x 2160 (16:9) @30Hz UHD-1 4K (UHDTV) 3840 x 1600 (21:9) UW 4K (Ultrawide 1600p) 3840 x 1200 (32:10) 29:9 4K (Super ultrawide 1200p) 3840 x 1080 (32:9) 32:9 4K (Super ultrawide 1080p) 3440 x 1440 (21:9) UWQHD (Ultrawide 1440p) 2560 x 2048 (5:4) QSXGA 2560 x 1920 (4:3) 2560 x 1600 (16:10) WQXGA 2560 x 1440 (16:9) @60Hz WQHD 2560 x 1080 (21:9) UWFHD (Ultrawide 1080p) 2048 x 1536 (4:3) QXGA 2048 x 1152 (16:9) QWXGA 1920 x 1440 (4:3) 1920 x 1200 (16:10) WUXGA 1920 x 1080 (16:9) @60, 75, 100 a 120Hz Full HD/1080p 1856 x 1392 (4:3) 1792 x 1344 (4:3) 1680 x 1050 (16:10) WSXGA+ 1600 x 1200 (4:3) UXGA 1600 x 900 (16:9) HD+ 1536 x 864 (16:9) 1440 x 900 (16:10) WXGA+ 1400 x 1050 (4:3) SXGA+ 1366 x 768 (16:9) HD 1360 x 768 (16:9) HD 1280 x 1024 (5:4) SXGA 1280 x 960 (4:3) SXGA- 1280 x 800 (16:10) WXGA 1280 x 768 (5:3) WXGA 1280 x 720 (16:9) HD/WXGA/720p 1280 x 600 1152 x 864 (4:3) XGA+ 1024 x 768 (4:3) XGA 800 x 600 (4:3) SVGA Other features: sound transfer support DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area HPD (Hot-Plug-Detect) support - communication sequence controlling the connection/disconnection of the device while running HDCP 1.4 and 2.2 support of power saving modes with spinning down controlled by a source device (PC) and a viewing device (monitor/TV) power supply via bus - no external power is needed gold-plated connectors for perfect contact and oxidation limitation adapter dimensions 45 x 21 x 12 mm total cable length incl. connector 18 cm weight only 24 g Supported operating systems: All versions of MS Windows, Mac OS X, Linux and other operating systems. It is a pure hardware converter, the transfer is provided only by the adapter chip without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used. Package contains: DisplayPort > HDMI adapter, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 5 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
Adjustable desk holder with monitor arm and notebook stand. The monitor holder with a notebook shelf is mounted on the desk. Position your screen perfectly to reduce neck and eye strain. Thanks to the holder, you will save space on your desk. The arms swivel, extend and retract, and tilt to change the reading angle. Allows displays to be rotated from landscape to portrait mode, etc. Allows easy, ergonomic positioning to reduce workload. Works with almost any LCD monitor (max. 27") and supports notebooks up to 17.3" VESA compatibility: 75 x 75, 100 x 100 mm Strong desk clamp or grommet for easy and secure attachment to your desk Built-in cable management for an organized and tidy workspace Surface finish: powder coating Fit Screen Size: 17"~32" Load capacity: 8 kg (per arm) Tilt range: +90° ~ -30° Rotation range: +90° ~ -90° Screen rotation: +180° ~ -180° Installation: Desk clamp or grommet Max. Desk Thickness: Clamp: 10 ~ 80mm, Grommet: 10 ~ 40mm Cable Management: Yes
