Slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. USB Outputs: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power Management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet). Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Power supply via USB bus (USB bus power). Dimensions 90 x 23 x 13 mm. Weight 38 g (incl. cable). USB cable length 20 cm. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported). Package contains: SuperSpeed USB multi port hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM25AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data: cable length 2.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Turns ‘older’ IDE devices into SATA devices , Allows recent SATA devices to be connected to ‘older’ IDE host controllers , Supports Serial ATA 1.0 interface with data transfer rates up to 150 MBytes/sec , Supports all UDMA-33/66/100/133/150 IDE hard drives and most ATAPI devices, Easy installation, no drivers required ,
Tootja: Natec Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: USB 3.0 seadme suurus: 2.5 tolli seadme liidesed: SATA III toetatud seadmed: Hard disk, SSD toiteplokk: USB laius: 78 mm kõrgus: 12.3 mm sügavus: 130 mm
Tootja: LogiLink Tootegrupp: USB | FW | eSATA | LAN | WLAN case / stadion Case / docking station liides: SATA seadme suurus: 2.5 tolli seadme liidesed: M.2 NGFF toetatud seadmed: M.2 SSD toiteplokk: USB 3.1 kaabel laius: 106 mm kõrgus: 41 mm sügavus: 12 mm Lisaandmed: Compliant koos USB3.1 Gen2 spetsifikatsioon, data transfer rate Kuni 10 Gbps, Compliant koos PCI Express M.2 spetsifikatsioon 1.0, Backward ühildub USB3.0/2.0/1.1 devices, ühildub B+M Key M.2 NGFF (SATA) SSD 2230 / 2242 / 2260 / 2280 mm, Can be a primary bootable device containing the O/S, (depends on the M.2 SSD ja motherboard BIOS), tugi Windows, MAC OS ja Android (with OTG function), Dimension Lisainfo: andmeleht
NewStar flat screen desk mount NewStar NM-D775DX3BLACK Full Motion Dual Desk Mount (clamp & grommet) with crossbar and handle for two 17-24" Monitor Screens, Height Adjustable (gas spring) - Black The NewStar NM-D775DX3BLACK is a tilt-, swivel and rotatable desk mount with crossbar and handle for three flat screens up to 24". This mount is a great choice for space saving placement on desks using a desk clamp or grommet mount. NewStars unique tilt (20°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is easily individually height adjustable to 60 centimetres using a gas spring. Depth adjustable from 0 to 63 centimetres. A unique cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. The mount is equipped with a 180° stop mechanism. NewStar NM-D775DX3BLACK with handle has three pivot points and is suitable for most screens up to 24" (61 cm). The weight capacity of this product is 2 to 18 kg (max. 6 kg each screen). The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates.
Impress 100 Micron thickness - offering an everyday level of document protection, Ideal for notices, craft materials, signage and frequently handled documents, Gloss finish in A4 size, Pack size of 100, Compatible with all ...
The NewStar KEYB-V200BLACK is a universal mount for keyboards and mice. The product can be installed on an existing wall-, ceiling-, or desk mount that has a VESA hole pattern of 75x75mm or 100x100 mm. Select the wall-, ceiling or desk mount you need and combine it with the KEYB-V200BLACK keyboard and mouse holder. The mount has been arranged both for left - and right-handed users. Any keyboard and mouse can be placed on this bracket. The plate is 65 cm wide and has a depth of 21 cm. The height of the vertical strip is 33 cm. On the back of the vertical strip are holes to organize both monitor and keyboard/mouse cables in a tidy way. Maximum carrying weight is 2 kg. By using an ergonomic keyboard/mouse mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. Screens : 1 Max. weight: 3 kg VESA minimum: 75x75 mm VESA maximum : 100x100 mm Depth: 21 cm Width: 65 cm Height: 33 cm
This NewStar CPU mount, model CPU-D075BLACK, allows you to mount a computer under a desk. A CPU mount creates a need and clean desk because its stored under the desk and doesn’t use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers on the floor.This NewStar CPU mount allows vertical installation of computers. Hide your cables and keep the workplace nice and tidy.Easy to adjust in width and depth to fit most desktop and tower PCs. The specifications listed show maximum and minimum width and depth of the mount.All installation material is included with the product.TüüpDesk-mountedMaksimaalne kaal (mahutavus)10 kgToote värvMustMaterjalMetallLaiuse reguleerimise ulatus50 - 100 mmKõrguse reguleerimise ulatus200 - 360 mm
Lihtne kinnitamine otse monitorile: Mi Computer Monitor Light Bar kinnitub otse monitorile ega võta töölaual kübetki ruumi. Asümmeetriline viimistletud disain: Valgusti disain on peensusteni läbimõeldud, nii et see ei tekita ekraanil peegeldusi ning tagab mugava töötamise ka pikkade töötundide vältel. Kõrge Ra95 värviedastusindeks: Valgusti värviedastusindeks küündib kuni Ra95, tagades loomutruud värvid ja detailid. Võbelusevaba tehnoloogia vähendab ka pinget silmadele. Vähem takistusi, rohkem vabadust: Koos lambiga on komplektis mugav juhtmevaba juhtpult, millega saab muuta valguse temperatuuri ja eredust. USB-C ühendus: Monitoriga ühenduses olles läheb valgusti automaatselt tööle, kui arvuti sisse lülitad. Valguse reguleerimine: 2700K - 6500K
Ühenda monitor lauakinnituse abil ning naudi minimalistlikut töölauda. • Sobib 19" kuni 38" monitoridele ning kannab kuni 10 kg raskust • Kinnitus sobib VESA 100x100 • +90° kuni -90° kohandamine külgedel • Kaablite peitmise võimalus
Original part number CC-HDMI-DVI-10 Product name Gembird HDMI to DVI male-male cable with gold-plated connectors, 3m, bulk pack Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type Video HDMI plugs 1x male HDMI A-type (19-pin, Single Link) DVI plugs 1x male DVI-D (Single Link) /18+1/ Cable length 3 m Other information Other information Gold plated plugs Yes Cable colour Black
4-port USB type-C hub (1 x USB 3.1 + 3 x USB 2.0) - Best of both worlds: - One fast USB 3.1 (Gen 1) port for fast data connection to e.g. external HDD - Three USB 2.0 ports for connecting standard peripherals (mouse, keyboard, printer, etc) - Windows 11 compatible
FEATURESHigh-Definition Multimedia Interface (HDMI) digital audio/video interface cableSupports data transfer bandwidth of up to 10 Gigabits/secAllows bi-directional communication between smart HDMI devicesSupports 3D TV with video resolutions up to 3840 x 2160 pixels at 24/25/30 Hz and 4096 x 2160 at 24 HzSupports HDMI Ethernet Channel 100 Mbps function (HEC)Supports Audio Return Channel technology (HARC)
Original part number CC-DPM-DVIM-6 Product name Gembird cable Displayport (M) - > DVI-D (24+1) 1.8m Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video DisplayPort plugs 1x male DisplayPort DVI plugs 1x male DVI-D (Dual Link) /24+1/ Cable length 1.8 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information Enables to connect a DVI display to a DisplayPort video sourceMax. resolution: 1920 x 1080 pixels
