With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Laadib korraga kuni 6 tahvelarvutit, nutitelefoni ja/või sülearvutit või MacbookiKuni 6 tahvelarvuti, nutitelefoni ja/või sülearvuti või Macbooki samaaegne laadimine kuni 140 W või muude USB-seadmete laadimine.Max. 5V 2,4A laadimine ühe USB A-tüüpi pordi kohta, max. 30W või 140W laadimine USB Type C pordi kohtaToetab USB Power Delivery: 2x PD 3.0 kuni 30W kumbki ja 1x PD 3.1 kuni 140WAku laadimisstandard 1.2 toetab kiirlaadimist, Apple'i laadimisprotokolli, QC 3.0/4.0 ja Samsung AFC toetabLindy 160W 6-pordiline USB-laadimisjaam võimaldab laadida kuni 3 USB-seadet A-tüüpi ja 3 C-tüüpi kaudu, nagu tahvelarvutid, nutitelefonid või sülearvuti või Macbook. Iga USB A-tüüpi port võib pakkuda kuni 5 V 2,4 A, kaks USB C-tüüpi porti võivad pakkuda kuni 30 W kumbki ja üks isegi kuni 140 W, et rahuldada kõige energiamahukamaid seadmeid. Kui kõik 6 porti on hõivatud ja/või kui koguvõimsus on suurem kui 160W, toimub koormuse tasakaalustamine.Tänu nutikale laadimisfunktsioonile ja paljude erinevate protokollide, nagu QC 3.0 ja 4.0 (ainult C-tüüpi porte), Samsung AFC ja Apple 5V 2,4A laadimisprotokolli ning BC 1.2 (ainult A-tüüpi porte) toetusele suudab see USB-laadimisjaam tuvastada ühendatud seadme, et reguleerida automaatselt laadimisvoolu kiire ja turvalise laadimise jaoks.USB Power Delivery Revision 3.1 võimaldab suuremat võimsust kuni 140 W rakendustele, sealhulgas suurematele sülearvutitele, mänguriarvutitele, Macbookidele, tööjaamadele või dokkimisjaamadele. Veel 2 Type C PD 3.0 porti, millest igaüks kuni 30 W võimaldab nutitelefonide ja tahvelarvutite kiiret, paindlikku ja turvalist laadimist.See USB-laadimisjaam pakub ka ülevoolu-, ülepinge- ja lühisekaitseid, et vältida seadme kahjustamist liigse voolu poolt.Plastikust vaheseinad saab kokku panna ja seadme ülaosas seista, mis võimaldab erineva laiusega seadmeid eri suurusega tahvelarvutite või mobiiltelefonide jaoks. See toode sobib ideaalselt kasutamiseks koolides, raamatukogudes, hotellides, restoranides või mis tahes kohas, kus kasutatakse mitut seadet. Laadimisjaama sujuvaks kasutamiseks on kaasas riigispetsiifilised toitekaablid, mis on ideaalsed ülemaailmsete ürituste või välismaal asuvatesse rajatistesse integreerimise jaoks.
Aktiver Adapter von HDMI zu USB Typ-C, ermöglicht 4K/8K-Wiedergabe falls nötige DisplayPort Spezifikationen fehlen, 4K mit 120Hz oder 8K mit 60Hz, geeignet für 4K/UHD- und 8K-Bildschirme
The HDMI extender kit is a high-performance video signal extender system consisting of transmitter and receiver modules. Extends the range of the Full HD audio-video signal up to 120 m using a CAT6 network cable (point-to-point connection). Additionally, you can use network switches and single receiver modules (DS-55518) to transmit video content over your existing network infrastructure (IP connection) to up to 253 displays and extend the coverage to an unlimited distance. Additionally, the integrated bidirectional infrared (IR) signal interface allows remote control of the input signal source via the output screen (on the receiver side). The solution allows you to extend the audio-video signal in Full HD via a CAT 6 cable over an unlimited distance via your existing network infrastructure or using commercially available network switches Extends the range of the Full HD audio-video signal via a CAT 6 cable to a distance of up to 120 m (point-to-point connection) Resolution support up to max. 1080p/60 Hz, Full HD Support for CAT 6, CAT 6A, CAT 7, CAT 8 network cables The infrared (IR) signal interface allows remote control of the input signal source via the output screen You can use additional receiver modules (DS-55518) and your existing network infrastructure to display video content on up to 253 screens (IP connection) Housing: metal Suitable for wall mounting
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 20 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 30 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
The HP OneLam 400 A4 is a compact laminator for versatile use in the hobby sector and home office and fits neatly on any desk. This modern laminator is suitable for both hot and cold lamination and seals your documents from business cards up to A4 format. An intuitive function button is used to set the required temperature based on the film thickness and this modern assistant is ready for use in 2-4 minutes. A cutting ruler, corner scraper and a 15-piece starter set consisting of three A4, four A5, four A6 and four business card sheets is supplied so that you can begin your laminating pleasure right away. The cutting ruler can be stored in a handy compartment underneath the device so that you always have the accessories at hand.
The Neomounts Select desk mount, model NM-D335D4BLACK is a tilt-, swivel and rotatable desk mount for 4 flat screens up to 27?. This mount is a great choice for space saving placement on desks using a desk clamp, desk stand or desk grommet. Neomounts Select's versatile tilt (90°), rotate (360°) and swivel (30°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The mount is manually height adjustable from 0 to 80 centimetres.An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. Neomounts Select NM-D335D4BLACK has one pivot point and is suitable for 4 screens up to 27" (69 cm). The weight capacity of this product is 8 kg each screen. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts Select VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area. All installation material is included with the product. - Screen size: 10 - 27" - Desk mount: Clamp, grommet and stand - Depth: 8 cm - Height: 0 - 81 cm - Tilt: 90° - Rotation: 360° - Swivel: 30°
Professional Series Freestanding Dual Horizontal Monitor Arm - Free-standing design allows dual monitors to be used in spaces that do not allow a clamp or grommet mount - Create a multi-display productive workspace and position your monitors to reduce eye, neck and shoulder strain - Low profile, weighted base provides enhanced stability - Minimize clutter with the intuitive cord management system - Holds 27” monitors up to 17.6 lbs. - Meets VESA mounting standards
Maximise desk space and elevate your monitor to a comfortable viewing height to reduce eye, neck and shoulder strain. Holds large screens weighing up to 22.6kg. 3 different settings to achieve your perfect viewing height. Modern wide screen design, available in black or white. Tested by FIRA International Ltd to comply with the ergonomic requirements set out in European Health and Safety Legislation: EN ISO 9241-5.
The universal table mount allows you to mount two monitors vertically, one above the other. Suitable for monitors (curved screen) up to 32 cm / max. 8 kg. Quick release closure function - allows you to quickly attach and remove monitors Ergonomically perfect adjustment of the monitor position to the user's height Monitors can be tilted, tilted, swiveled and height-adjusted Monitor arm: tilt: -45°/+45°, slide: -45°/+45°, front panel rotation: -180°/+180° Integrated cable management solution: for an organized and tidy workspace
SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5" disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer. This compact helper will allow you easiest connection of any 2.5" SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy. You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux). SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station. The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps. Speed up to 5 Gbit/s. Connection via USB Micro-B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface. Supports 2.5" SSD/HDD. Max. disk capacity all without limitation. Max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class Specification. The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down when idle. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Connection via USB Micro-B female connector. USB Micro-B USB-A cable 60 cm long is included. LED indicating SSD/HDD dock power and disk activity in both shafts. Station dimensions 89 x 58 x 59 mm. Weight 137 g. Power: Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16. Power switch. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Both HDD and SSD can be cloned. Cloning speed up to 300 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Supported operating systems: MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SSD/HDD dock, USB Micro-B USB-A cable 60 cm long, power cable 100 cm.
B-1232CL-U3 ICY BOX Dual HDD / Hard Drive USB 3.0 docking station for SATA 2.5 inch and 3.5 inch hard disk cloning station and reader, adapter, external Manufacturer information: HUGE CAPACITY: Expand your capacity with a dual docking and cloning station for 2.5" and 3.5" SATA drives. With SINGLE mode, both hard drives are recognized as separate drives SYSTEM REQUIREMENTS: A free USB 3.0 Type-A port on the host computer is enough to freely expand the storage capacity. The dock supports Windows and macOS VERY FAST: The USB 3.0 host connection supports UASP and guarantees data transfer speeds of up to 5 Gbit/s. You can also transfer large amounts of data without long waiting times HARD DRIVE CLONING: You can clone bootable hard drives at the touch of a button, even without a computer. The docking station draws power from the included power adapter. Data backup can be that simple ALWAYS INFORMED: Hot-swappable hard drives are easy to replace and boot. A total of four LEDs inform you of the cloning status and progress
Compact AXAGON ADM2-CM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-C cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-C to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 19 g. USB-C male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
Streamline your work with Natec MayflyAre you looking for a compact and functional USB HUB that will allow you to use more accessories? Meet Natec Mayfly a USB HUB with up to 4 USB-A 3.0 ports and an adapter that will connect it to both USB-C and the classic Type A connector. Small size, high data transfer speed and readiness to operate without unnecessary drivers this is Natec Mayfly.MAIN FEATURESDo more with faster data speedsSpeed up your data transfer no matter where you are. Take advantage of up to 4 USB-A 3.0 ports offering speeds of up to 5 Gbps, which is significantly faster than USB 2.0. Do you want to work more efficiently and save time? With Natec Mayfly it is possible.Connect where you wantWant to connect Natec Mayfly to the USB-C socket? Or maybe you prefer to use the included USB-A adapter? Natec Mayfly is highly versatile, it works with older and newer hardware seamlessly.Always with youWorking in the field? With Natec Mayfly it's easier than you think. Small dimensions (106 x 29 x 11 mm) and a weight of only 40 grams will allow you to take it with you almost anywhere. You can easily fit it into your suitcase, backpack, bag or even pocket.ADDITIONAL FEATURESBuilt-in LEDIn everyday work, the built-in LEDs will also be useful, indicating correct operation. It will also make it easier to locate the connected HUB when you want to work in a dark room or at night.Plug & PlayNatec Mayfly works as soon as you connect to it. You do not need to install additional drivers or unnecessary control applications. All you have to do is connect it to your computer. It is that easy.
The Neomounts DS75-450WH2 NEXT Core is a full motion desk mount for two flat screens up to 32" with a maximum weight capacity of 8 kg per screen. The versatile tilt (20°), rotate (360°) and swivel (20°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screens. Additionally, the mount has gas spring height adjustment (27,7-56 cm) and depth adjustment (0-50,5 cm), to create the perfect working position. The DS75-450WH2 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS75-450WH2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Unused hole patterns can be covered using one of Neomounts VESA adapter plates. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation. The inner packaging of the NEXT Core is plastic free and made from cardboard and paper. For wall installation, the AWL75-450WH wall adapter is optionally available.
The Dell Compact Form Factor All-in-One Stand - CFS25 enhances the way users interact with their workspace by offering a blend of ergonomic design and comprehensive functionality. Designed to support display screens ranging from 19" to 27", this stand is a perfect fit for a wide array of desktop and monitor setups. It comes equipped with an adjustable height feature, allowing for a 150 mm height range to ensure comfortable viewing angles and improved posture. The stand also offers a suite of adjustments including tilt, swivel, and the ability to switch between portrait and landscape modes, catering to the dynamic needs of modern professionals.In addition to its ergonomic benefits, the CFS25 stand focuses on workspace organization. With integrated cable management and additional accessories like a cable organizer cover and monitor base extender, it minimizes desk clutter, leading to a more productive and less distracting work environment. Security features such as a Kensington security slot and padlock loop provide peace of mind, knowing that your setup is protected. Whether for office use or a home setup, the Dell Compact Form Factor All-in-One Stand - CFS25 is an essential tool for anyone looking to enhance their workstation's functionality and aesthetic.
The DIGITUS DA-73112 USB extension cable is designed to enhance connectivity with its data transfer capabilities. Supporting USB 3.0 and USB 3.1 standards, this double shielded cable allows for a maximum data rate of up to 5 Gbps, ensuring efficient performance.Featuring a male 24 pin USB-C connector on one end and a female 24 pin USB-C connector on the other, this cable offers versatility and ease of use. With its sturdy design and reliable functionality, the DIGITUS USB extension cable is a solution for extending your USB connection, making it an accessory for various devices.
The DIGITUS USB extension cable DA-73113 is designed to enhance your connectivity experience. This reliable cable boasts USB 3.2 compliance, ensuring high-speed data transfer. With its double shielded technology, you can expect reduced interference for better performance. Featuring a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable allows for seamless connections between devices, making it ideal for various setups, whether at home or in the office.
The DIGITUS USB extension cable DA-73111 offers reliable connectivity for your devices. With compliance to USB 3.0 and USB 3.1 standards, this cable ensures fast data transfer speeds of up to 5 Gbps. Its double shielded design helps protect against interference, ensuring a stable connection.Equipped with a 24-pin USB-C male connector on one end and a 9-pin USB Type-A female connector on the other, this cable is versatile and compatible with a wide range of devices. Whether extending the reach of your peripherals or setting up your workstation, the DIGITUS USB extension cable provides dependable performance and connectivity.
The Neomounts by Newstar AWL-250BL16 is a universally applicable VESA extension kit for wall mounts with a maximum weight capacity of 75 kg. With the extension kit, the VESA can be extended from 400 mm to 500 or 600 mm. The kit is installed on top of the existing brackets of the wall mount and is usable for both landscape and portrait mounting. Functionality Type: Full motion, Tilt, Fixed, Swivel Height: 64 cm Width: 8 cm Depth: 1 cm
Universal pole bracket for LED, LCD monitors with a screen diagonal of 17 to 32 inches and a maximum weight of 8 kg. The arm allows you to adjust the tilt angle and rotate the monitor. This allows you to position the monitor in the optimal viewing position, which increases comfort while working and reduces strain on the spine and eyes. The removable VESA plate allows quick and easy mounting of the monitor to the stand. Compatible i.e. with LED & LCD Monitors by Sony, LG, Samsung, Philips, Sharp, Panasonic, Toshiba, Grundig, Pioneer, JVC, Benq, Sanyo, NEC, Hyundai, Hitachi, iiyama, Acer, Gigabyte, KTC.
The Endorfy Atlas Double holds your windows to the world screens like the best strongman. Not only does this metal tough guy carry 8 kg on each hand, but it lifts screens from 13" to 27" - to create the perfect setup for work and play.The Atlas Double is compatible with 75 x 75 mm/100 x 100 mm VESA standards. You can also easily adjust the height of the screens, rotate them left or right (from - 90° to + 90°), and tilt them up or down (from - 35° to + 90°). Mounting the whole thing takes just a few seconds - just screw the clamp onto the desk and you're done. You're ready to go do your own thing.
Der 90 Watt Netzadapter DELL-14P3N ist speziell auf die Erfüllung der Stromanforderungen eines Dell Notebook ausgelegt. Über den leistungsstarken 90 Watt Netzadapter kann das System zum Betrieb und zum gleichzeitigen Aufladen des Akkus an die Stromversorgung angeschlossen werden. Im Lieferumfang ist ein 1 Meter langes Netzkabel enthalten. Jetzt muss das Netzteil nicht mehr zwischen Büro und Zuhause hin- und her getragen werden. Mit einem zweiten Netzadapter für das Notebook ausgestattet, hat man einen fürs Büro und einen für Zuhause oder unterwegs. Der 90 Watt Netzadapter DELL-14P3N ist mit einem Gummiriemen zum einfachen Kabelmanagement und einem LED-Leuchtring auf dem Gleichstromanschluss ausgestattet. Originalteile von Dell werden strengen Tests durch qualifizierte Techniker unterzogen, um Kompatibilität und Zuverlässigkeit sicherzustellen.
Kensington SmartFit. Paigaldus: Klamber/kaitsekrae, Maksimaalne kaal (mahutavus): 18 kg, Ekraani maksimaalne suurus: 81,3 cm (32"), Paigaldussüsteemi ühilduvus (min): 75 x 75 mm, Paigaldussüsteemi ühilduvus (max): 100 x 100 ...
TV floor stand, 37" - 86", white Easily move your TV to any location Perfect for office and educational use Metal TV floor stand with caster wheels Supports most 37" - 86" LCD TV's Stepless Height Adjustment Practical shelf for equipment or materials Durable caster wheels with locking mechanism VESA compatible, max. 600 mm x 400 mm
Neomounts AV30-500BL. Toote tüüp: Videobaari kinnitus, VESA-paigaldusliidesed: 200 x 200,200 x 300,200 x 400,400 x 200,400 x 300,400 x 400,400 x 600,600 x 300,600 x 200,600 x..., Ekraani minimaalne suurus: 109,2 cm (43"). ...
HP Bright White Inkjet Paper is HP's brightest, low-cost paper for everyday black and colour line drawings. The specially treated surface dries instantly and consistently produces crisp line resolution and high-contrast colour prints.
Turns ‘older’ IDE devices into SATA devices , Allows recent SATA devices to be connected to ‘older’ IDE host controllers , Supports Serial ATA 1.0 interface with data transfer rates up to 150 MBytes/sec , Supports all UDMA-33/66/100/133/150 IDE hard drives and most ATAPI devices, Easy installation, no drivers required ,
Original part number A-DVI-VGA Product name Gembird Adapter DVI-A 24-pin male to VGA 15-pin HD (3 rows) female Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type DVI-A male Plug 2 type D-SUB 15 female Other information Other information Colour Grey Additional information Transmits only analog data
Original part number CC-HDMI4-15 Product name Gembird HDMI V1.4 male-male cable with gold-plated connectors 4.5m, bulk package Producer Gembird Class of product Cables - HDMI | DP | Component | DVI | VGA Basic information Basic information Cable type audio-video HDMI plugs 2x male HDMI A-type (19-pin, Single Link) Cable length 4.5 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information HDMI V1.4
