StarTech.com USB315CB2M. Kaabli pikkus: 2 m, Pistmik 1: USB C, Pistmik 2: USB B, USB versioon: 3.0 (3.1 Gen 1), Konnektori sugu: Meessoost/meessoost, Maximum data transfer rate: 5000 Mbit/s, Pistmikukontaktide kate: Nikkel, Toote ...
Tootja: LogiLink Tootegrupp: Converter | adapter (without võrguseade products) 1-ühenduse tüüp: USB 3.1 type C (naissoost- Power Delivery) 2-ühenduse tüüp: HDMI naissoost, USB A-type värv: valge Lisaandmed: Input Lisainfo: andmeleht
Horisontaalselt paigaldamiseks 19-tollistesse serveriräkidesse, samuti muudesse rakendustesse, kus IT-seadmed saavad toidet IEC 60320 C13 ja C19 pistikupesadest. Kompaktne 1U suurusega PDU (võimsusjaotusseade). Horisontaalselt paigaldamiseks 19-tollistesse serveriräkidesse, samuti muudesse rakendustesse, kus IT-seadmed saavad toidet IEC 60320 C13 ja C19 pistikupesadest. PDU-d on tänu oma tugevale alumiiniumprofiilile ja kvaliteetsetele komponentidele töökindlad ja vastupidavad. Modulaarne konstruktsioon ja mitmekülgsed funktsioonimoodulid võimaldavad neid seadistada vastavalt individuaalsetele nõudmistele. Lukustatavad pistikupesad vastavad standardile IEC 60320, on saadaval lisavarustusena IEC Lock®-iga, kaitsevad ootamatute rikete eest ja tagavad maksimaalse ohutuse andmekeskustes. Riigispetsiifiliste pistikupesadega versioon on saadaval tellimisel.Kaitse lukustatavate pistikupesade abilKuni 12 pistikupesa PDU kohtaIndividuaalsed funktsioonimoodulidLihtne paigaldamine
Need Delocki konksuga kaablisidemed on ideaalsed näiteks üksikute kaablite, juhtmete, voolikute või torude ruumi kokkuhoidmiseks.Ainulaadne disainKonksuga kaablisidemete eripära on rihma auk, mis võimaldab kinnitada ja kinnitada kaablikimbud. Seega saab korraga kinnitada mitu kaablikimpu. Konkskinnitus võimaldab kaablisideme kiiresti kinnitada ja hõlpsasti uuesti eemaldada.Täiuslikult organiseeritud ja mitmekülgneKonksuga kaablipaelad sobivad kõikide kaablitüüpidega, nt võrgukaablid, USB-kaablid, HDMI-kaablid, laadimiskaablid, toitekaablid jne. Kas kontoris, kodus või tööl, kaablid jäävad alati korralikult sorteeritud ja jätavad korrastatud üldmulje. Konksuga kaablisidemed on ideaalne lahendus, et hoida asjad korras ja vältida kaablite segadust.SpetsifikatsioonPikkus: ca. 150 mmLaius: ca. 12 mmKogus: Polükott: 10 tk.Kaablite lihtne komplekteerimine ja organiseerimineKiire kinnitamine ilma tööriistataRihm kaabli kinnitamiseksKinnituskonksud korduvkasutamiseksVärv: mustPakendi sisu10 x konksuga kaabliside
Asendusjootekomplekt jootmisjaama AP2 jaoks, 4 erinevat otsikutasendusjootmisotsikud tootele 51091Jootmisotsikud on vastupidavad korrosioonile, oksüdeerumisele ja kõrgetele temperatuuridele, kuumenevad kiiresti ja tagavad pika kasutusaja. Komplektis on tikkimisotsikud algajatele ja pliiatsikujulised otsikud edasijõudnutele, seega on komplekt ideaalne universaal.Komplektis on kaks pliiatsikujulist jootmisotsikut, üks tikkimisotsik ja üks lõikeotsik.Sobib ideaalselt mitmesuguste jootmisülesannete täitmiseks, alates peenikestest töödest elektroonikasektoris kuni paksude kaablite jootmiseni.1x jootekiir ø 0,5 mm, 70 mm, krae ø 6,6 mm, vars ø 4,8 mm, ots: 22 mm1x jootetip ø 1,5 mm, 70 mm, krae ø 6,6 mm, varre ø 4,8 mm, otsik: 22 mm1 tk jootetip (tikk) ø 2,0 mm, 70 mm, krae ø 6,6 mm, võll ø 4,8 mm, otsik: 22 mm1x lame disain 45° ø 3,0 mm, 70 mm, krae ø 6,6 mm, võll ø 4,8 mm, otsik: 22 mm
FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes
The HX Monitor Arm is the perfect accessory to add flexibility and superior ergonomics to your monitor or TV. The sleek new design frees up space and allows positioning of your display for greater productivity.Sleek and streamlined, it accommodates large monitors weighing up to 42 lbs (19 kg). Extension/retraction motion and height adjustment capability promote user comfort.- Increases viewing comfort: Helps reduce eye, back and neck strain- Patented CF™ motion technology provides premium ease-of-use display adjustment- Cable management feature routes cables tightly under the arm and through the extension, out of the way- Eliminates scrolling: Rotate screens for portrait viewing of photos and documents- Rotation-stop on base limits range to 180° and prevents monitor from making contact with wall- Folding arm frees up space in constrained areas- Upgrade this arm with the HX Triple Bow Kit to create a triple monitor arm- Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free height adjustmentMaksimaalne kaal (mahutavus)19,1 kgMaksimaalne ekraanisuuruse sobivus106,7 cm (42")SobilikTVPaigaldussüsteemi ühilduvus (min)75 x 75 mmPaigaldussüsteemi ühilduvus (max)400 x 400 mmToetatud ekraanide arv1PaigaldusBolt-throughVESA-paigaldusliidesed75 x 75,100 x 100,200 x 100,200 x 200,400 x 200,400 x 400,400 x 300 mmKaldenurk-75 - 75°Liikumisulatus-180 - 180°Rotatsiooni nurk360°Toote värvValgePakendi laius305 mmPakendi sügavus488 mmPakendi kõrgus178 mmPakendi kaal8,3 kg
StarTech.com USB31AC50CM. Kaabli pikkus: 0,5 m, Pistmik 1: USB A, Pistmik 2: USB C, USB versioon: 3.1 (3.1 Gen 2), Maximum data transfer rate: 10000 Mbit/s, Pistmikukontaktide kate: Nikkel, Toote värv: Must
Extensive complete set for gentle and thorough cleaningIdeal for lenses, displays, camera bodies and other optical glasses. Whether dust, sand or fingerprints - the equipment is always exposed to such influences during use. In order to prevent any damage or loss of quality, it is advisable to clean the glasses and housing parts at regular intervals. This set BIG LCK-8, which is delivered in a robust transport box, contains everything that is needed. This cleaning set fits in every photo bag and should not be missing on any (photo) trip.Contents: 1 × robust transport box 5 × wet and dry cloths 1 × optics cleaning fluid 30 ml 1 × fine dust brush 1 × optics cleaning paper 1 × Lenspen carbon powder stamp/brush 10 × optics cleaning sticks 1 × bellows dust blower 1 × optics microfiber cloth 15 × 17 cm
