• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports 3D display, HDCP2.2 and HDR • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
Height-Adjustable Monitor Stand, 1732 inches, up to 9 kg Stylish design with a tempered glass base Position your screen perfectly for an optimal, ergonomic setup Compact, space-saving solution Product Features: Height-adjustable monitor stand with a tempered glass base Easy, stepless height adjustment up to 420 mm Allows screen rotation and tilt, as well as switching between landscape and portrait mode Works with almost any LCD monitor (max. 32" / 9 kg) Sturdy glass base plate for secure placement on any desk Built-in cable management system for an organized and tidy workspace VESA compliant, max. 100 × 100 mm
• Max. Load Capacity: 25Kgs • Increased storage room beneath the desktop • Non-skid Silicone Pads • Raise your monitor to viewing comfort • USB Hubs with USB-A (5Gbps) x 1 + USB 2.0 x 2 • USB Charging port x 2 (USB-A + USB-C) • Input: 5V=3A, 9V=2A, 12V=1.5A • Output: 5V=3A, 9V=2A, 12V=1.5A (Max. 18W) • With integrated smartphone holder • With storage box • Length has three segment mode adjustment
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.0 compatible • High Speed with Ethernet • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 4K/60Hz • Bandwidth up to 18Gbps • Supports HDR10, HLG, HDCP 2.2, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Zinc Alloy housing • Gold Plated Connectors for high signal quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using • The range of active optical leads give you up to 100m of distance
• HDMI Male to Male • HDMI 2.1 compatible • Supports HDMI Ethernet Channel (HEC) • Supports video resolutions up to 8K/60Hz • Bandwidth up to 48Gbps • Supports HDR10, HLG, HDCP 2.3, HDCP 1.4, 3D, EDID, HEC, CEC, ARC • Supports video resolutions up to 8K/60Hz, 4K/120Hz • Up to 1536 kHz audio sampling rate • Dynamic HDR (HDR Dynamic Metadata) • Enhanced Audio Return Channel (eARC) • Variable Refresh Rate (VRR) • Quick Media Switching (QMS) • Quick Frame Transport (QFT) • Auto Low Latency Mode (ALLM) • Display Stream Compression (DSC) • Zinc Alloy housing • Gold Plated connectors for high transmission quality • This AOC cable is single way transmissing, can only from Source to Display, please note the direction before using
Green Cell Power Stream USB Type C - Ligthning 1m cable - Directly charge and sync your iPhone with the latest MacBook / iPad USB-C and up to 2.5x faster PD charging is just a fraction of what becomes possible Power Delivery 18W fast charging support allows you to charge your iPhone SE (2020) / 11 / 11 Pro / XS / X smartphones up to 50% in just 30 minutes! The cable also supports standard charging for devices including iPhone 7 / 6S / 6, iPad Air / mini and iPod GC Power Stream is officially certified by Apple MFi and has a C94 chip, ensuring perfect operation with all compatible Apple devices. Forget the hassle of non-certified accessories The GC Power Stream's unrivalled durability is the result of: extremely abrasion-resistant braided sleeving, metal shielding that effectively protects both plugs from breaking, and multi-stage cable protection using Kevlar fibres.
• USB-C Male (Compatible with TB3/TB4) • Supports HDMI resolution up to 4K/60Hz • USB 3.2 Gen1 Super Speed (10Gb/s) port x 4 • Power Delivery: 100W Max. • Aluminum casing for heat dissipation • Simple Plug-and-Play installation • Cable length: 25cm
OverviewThe Xenon™ XP 1950 series scanners deliver premium performance and class-leading durability for improved employee productivity and maximum uptime – leading to a lower TCO.Fast, Accurate ScanningSuperior scanning performance, even on damaged and poor-quality barcodes, eliminates wasted seconds from every transaction.Best-in-Class DurabilityEngineered to withstand 2,000 0.5 m (1.6 ft) tumbles and 50 1.8 m (6 ft) drops, the scanners bring class-leading durability and reliability to any environment.Accurate 1D and 2D ScansXenon XP 1950 series scanners are optimized for scanning both digital codes off customer smartphones and merchandise codes by the cashier at the register.Freedom of Cordless ScanningTake advantage of the freedom of wireless scanning up to 100 meters (300 feet) from the base, or the security of a tethered USB or serial connection.Easy Software UpdatesThe Honeywell Scanner Management Utility (SMU) creates a holistic solution that automates how you deploy and update the scanners in your environment.Product DetailsCashiers struggling to read poorly printed or damaged barcodes can lead to frustration from customers and ultimately lost revenue. Delivering excellent customer service is your mission, and providing lasting impressions for your loyal customers driven by fast, accurate, and friendly checkout experiences is critical. Empower your cashiers to deliver on your mission and commitment to provide excellent customer service experiences with the Honeywell Xenon™ Extreme Performance (XP) series. The Xenon XP 1950g offers superior scan performance, easily capturing even the most difficult-to-read or damaged barcodes.Engineered to 50 drops at 1.8 m (6 ft) and 2,000 tumbles at 0.5 m (1.6 ft), and with an IP41 ingress rating for water and dust, the Xenon XP 1950g scanner delivers class-leading durability. This significantly reduces scanner downtime and service costs, leading to a longer lifecycle and a lower total cost of ownership.Designed for retail environments that demand high-accuracy scanning of barcodes, whether at a distance, or even on damaged barcodes, the Xenon XP 1950g scanner reduces strain on the associate – decreasing the need to bend to reach barcodes on the bottom shelf or bottom of the basket. The Xenon XP 1950g is available in Black or Lyric White models to match the scanner to your environment, and an available vibration mode ensures you get scanner feedback regardless of your surroundings.
Kõikehõlmav kaitse Ubiquiti UACC-ETH-SP-Panel-24 on töökindel 24-portiline Etherneti ülepingekaitse mis on mõeldud siseruumides rack-paigaldamiseks. Toetades andmeedastuskiirusi kuni 10 Gbps ja PoE++ tagab see usaldusväärse kaitse teie kriitilise võrguinfrastruktuuri jaoks. Iga port pakub 20 kA voolutugevust ja reageerib kiiresti ülepingetele (100 V/s kuni 1 kV/µs) kaitstes seadmeid ESD- ja EMP-sündmuste eest. 1U rack-mount vorming sobib ideaalselt standardse võrgurackiga mistõttu on see ideaalne ettevõtte võrkudele andmekeskustele ja tööstuslikele keskkondadele. Valmistatud vastupidavast SGCC terasest talub paneel karme töötingimusi vahemikus -40° kuni +80°C. Minimaalse signaali kaduga (mahtuvus ainult 1 0 pF sagedusel 1 MHz) säilitab see kiire ühenduvuse tagades samal ajal täieliku PoE toetuse. Olgu tegemist lülitite ruuterite või juurdepääsupunktide kaitsmisega pakub see paneel professionaalset kaitset kompaktse ja tõhusa disainiga. Kõrge jõudlus ja lihtne integreerimine 24 integreeritud ülepingekaitse portiga pakub UACC-ETH-SP-Panel-24 täielikku kahesuunalist kaitset Etherneti liinidele. 48 RJ45-pistikupesa võimaldab lihtsat inline-paigaldust häirimata olemasolevaid võrgukonfiguratsioone. DC-ülepingega 90 V kiirusel 100 V/s ja maksimaalse impulsspingega 600 V kiirusel 1 kV/µs neelab see tõhusalt üleminekvoolu ja hoiab ära kahjustused. Paneeli tugev isolatsioon (1G oomi 50 V juures) ja kompaktne 1U kõrgus tagavad ideaalse sobivuse isegi suure tihedusega serverikeskkonnas. Lihtsuse ja jõudluse nimel loodud seade aitab tagada kõigi ühendatud seadmete katkematu kiire töö. See on hädavajalik lahendus võrguadministraatoritele kes soovivad kaitsta kriitilise tähtsusega infrastruktuuri kahjulike pingetõusude eest.
FNIRSI 2C53T portable 3in1 oscilloscope multimeter signal generatorThe FNIRSI 2C53T combines the functions of a 2×50 MHz/250 MSa/s oscilloscope with an 8-bit ADC and 16 kpct memory buffer per channel (pre/post-trigger), a multimeter up to 19999 and a 50 kHz signal generator. Input impedance is 1 MΩ ∥ 15 pF with AC/DC/GND switching. The rugged ABS housing with silicone overlays, 2.8-inch 320×240 px screen and 3000 mAh battery (up to 4 h of operation) guarantee mobility and continuous measurements even in harsh environments. The device is CAT II 300 V certified, with dual ceramic fuses and an anti-overvoltage circuit. With the ability to save waveforms and update firmware, you are always in control of your results and have access to the latest features.Color screen and multimeterThe 2.8″ display with a resolution of 320×240 px presents waveforms in full color with an "infinite afterglow" function (fixes the signal trace on the screen, even after it fades), keeping the waveform trace on the screen. Y-T, Rolling and X-Y modes (so-called Lissajous figures for analyzing phase differences between signals) make it easy to observe phase relationships, and high brightness guarantees readability in all conditions. A built-in multimeter with up to 19999 resolution allows you to measure DC/AC, low and high currents, resistance, capacitance, diodes, temperature and continuity (buzzer). Smart protections protect the user and equipment from overload.Advanced hardware architectureThe professional ARM + FPGA + high-performance ADC combination, used in desktop oscilloscopes, provides fast triggering and faithful representation of signals. The triggering system offers Edge (rising/falling), Pulse Width, Video and Slope modes with pre-trigger up to 50% and post-trigger up to 50%, so even the shortest anomalies are recorded without loss of detail.Signal generatorThe built-in function generator offers voltages up to ±400 V and frequencies up to 50 kHz and 13 waveforms (sine, square, triangle, sawtooth, ramp, pulse, noise, etc.) with adjustable offset (signal offset relative to zero) and amplitude in 10 mV/div steps, allowing testing of filters, amplifiers and analog circuits without additional hardware.Automatic measurement setupThe AUTO function adjusts the range and trigger with a single button, allowing instant waveform viewing without time-consuming setup. Support for additional Single and Normal modes streamlines work for quick field measurements. One click is all it takes to save a screenshot of the waveform to the oscilloscope's memory or directly to a computer via USB. This makes it easy to archive results and further analyze them in any environment.Isolated measurement channelsTwo completely independent CH1 and CH2 inputs with 50 MHz bandwidth eliminate mutual interference, improving measurement precision. The 250 MSa/s sampling rate reproduces PWM pulses and power supply ripples with maximum fidelity.Rugged constructionThe ABS (Acrylonitrile Butadiene Styrene - a high-strength plastic) silicone-coated housing provides drop and shock resistance, and the gold-plated PCB (Printed Circuit Board) tracks are corrosion-resistant. The 3,000 mAh battery guarantees up to 3 hours of operation. The fold-out stand allows the device to be positioned at any angle, while ergonomic buttons and a USB-C port provide convenience in handling and charging.Included:FNIRSI 2C53T portable 3-in-1 oscilloscope10× measurement probes (2 pcs.)Probe with crocodile clampsCables for the multimeterCharging cableCarrying bagUser's manual Product parametersScreen2.8-inch HD color displayResolution320 × 240Charging specificationsUSB-C (5 V/1 A)Rechargeable batteryLithium-ion 3000 mAhSupported functionsOscilloscope, signal generator, multimeter (see function parameters for details)Standby time6 h (laboratory maximum)LanguageChinese and EnglishDimensions167 × 89 × 35 mmWeight300 g Oscilloscope parametersChannelstwo-channelSampling250 MSa/sAnalog bandwidth50 MHz (each channel independently 50 MHz)Memory depth1 kpointsImpedance1 MΩTime base range10 ns - 20 sVertical sensitivity10 mV/effect - 10 V/effect (×1)Maximum measurement voltage±400 VTrigger modeAUTO/Normal/SingleDisplay modeY-T/Rolling/X-YCouplingAC/DCTrack persistenceOFF, 500 ms, 1 s, ∞.Mathematical functions8 basic operations + FFTWaveform dump recordingyesWaveform image exportyesCursor measurementyes Signal generator parametersChannelsingle channelFrequency1 Hz - 50 kHzAmplitude0,1 - 3,0 V Multimeter parametersDC voltage1.9999 V / 19.999 V / 199.99 V / 1000 V ±(0.5 %+3)AC voltage1.9999 V / 19.999 V / 199.99 V / 750.0 V ±(1 %+3)DC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.2 %+3)AC current19.999 mA / 199.99 mA / 1.9999 A / 9.999 A ±(1.5 %+3)Resistance9.999 MΩ / 1.9999 MΩ / 199.99 kΩ / 19.999 kΩ ±(0.5 %+3); 1.9999 kΩ / 199.99 Ω ±(2.0 %+3)Capacitance9.999 mF / 99.99 mF ±(5.0 %+20)Temperature-55 °C - 1300 °C (-67 °F - 2372 °F) ±(2.5 %+5)Diode measurementYesContinuity testYes
Ideaalne valik reisijale, kes suundub Ühendkuningriiki või teistesse sama standardiga piirkondadesse. Adapter võimaldab turvaliselt kasutada ka suurema tarbimisega seadmeid, näiteks sülearvuteid või fööne. • Sobib kasutamiseks Suurbritannias, Iirimaal, Küprosel, Keenias, Saudi Araabias, Seišellidel ja mujal • Toetab suure võimsusega seadmeid, sealhulgas sülearvuteid, reisifööne ja tahvelarvuteid • Sobib nutitelefonide, kaamerate ja muude elektroonikaseadmete laadimiseks • Mõeldud Europlug-tüüpi (C ja sarnased) pistikutega seadmetele
Raspberry Pi SC1166 M.2 HAT+ for Raspberry Pi 5 - Raspberry Pi M.2 HAT+ for Pi 5 allows users to connect M.2-format PCIe and NVMe devices to the PCIe FPC connector on Raspberry Pi 5. This HAT+ is an adapter board that supports 2230 and 2242 formats M.2 Non-Volatile Memory Express (NVMe) drives in both PCI Express Gen-2 and higher-performance Gen-3. The M.2 HAT+ for Pi 5 conforms to the HAT+ specifications and is automatically detected by the newer Raspberry Pi software/firmware. This adaptor board is supplied with a 16mm stacking header and spacers/screws to be fitted to a Raspberry Pi 5 with the Active Cooler in place. The 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories. The M.2 HAT+ board comes in 65.1mm x 56.7mm x 5.6mm dimensions and 13g weight. 4Gbits/s PCIe 2.0 interface provides fast (~450Mbytes/s) data transfer to and from NVMe SSD drives and other PCIe accessories Conforms to the HAT+ specification Automatically detected by the new Raspberry Pi software/firmware Supplied with a 16mm stacking header and spacers/screws to enable the M.2 HAT+ to be fitted to a Raspberry Pi 5 with the Active Cooler in place 65.1mm x 56.7mm x 5.6mm (max) (L x W x H) dimensions 13 grams weight
CSV-1009 DisplayPort™ 2-in-1 Bi-directional Switch 8K The Club 3D® CSV-1009 is a versatile DisplayPort™ switch that allows you to switch between two sources on one screen or route one source to either of two screens at 8K resolution. DisplayPort™ 2-in-1 Bi-directional Switch for 8K; it can switch either of two sources to one display or switch one source to either of two displays. Supports the DP1.4 specification. Video resolution up to 7680x4320P at 60Hz. Supports HDR, DSC, and HDCP pass-through. The toggle button lets you quickly switch between 2 video sources or 2 monitors, and the blue LED indicators on both sides show which port is selected for operation. The longer/thinner the cable, the greater the risk of signal instability. To ensure maximum performance, use our Club 3D® cables. Power can be drawn through the DP male port from the connected device. If some devices are not compatible with power supplied via the DP male port, power can instead be supplied to the switch via the Type-C® female port.
• More motion with less effort for best-in-class ergonomic positioning • Lift, tilt and turn your monitors for perfect views that hone your focus • Flexible design and accessory add-ons for every configuration • Raises screens off the desktop from a compact base • Improved cable management and streamlined look enhance your work area • Fewer parts and intuitive adjustment make setup effortless
Attach your monitor directly to your desk with the LogiLink gaming monitor mount. This allows you to use your screen with full freedom of movement and tilt, swivel or rotate it as you wish. The BP0162 also includes a built-in lighting effect that integrates seamlessly into any gaming station. The mount provides you with a great viewing experience while playing games and creates more space on the desk for other gaming accessories.
With its slim and ergonomic design, the ICY BOX IB-MS524-T dual monitor swivel arm minimizes the space required by the monitors and promotes a more flexible and productive workplace. The Smart Torque Adjust function allows easy adjustments to different monitor weights, and the high-quality gas strut ensures smooth height adjustment. The integrated Easy Cable Management guides the cables under the arm and avoids clutter. The thoughtful design minimizes tripping hazards and improves the aesthetics of the workplace. The IB-MS524-T monitor arm features a versatile metal desk mount that can be mounted as a clamp mount or desk grommet and is suitable for most desks thanks to the adjustable clamp height. By the way, you don't have to crawl under the desk if you want to use the clamp holder, because it is attached from the top of the table. The removable VESA plates made of high-quality steel can be lifted out after a simple unlocking, so that they can first be attached to the monitor and then easily hooked back into the support arm. They support the 75 x 75mm and 100 x 100mm VESA standard. Made from a robust combination of steel, plastic and high-quality aluminum, the IB-MS524-T monitor mount securely supports two monitors up to 32" and 9 kg in weight. Monitor mount type Color gray EAN 4250078174189 Manufacturer no. 61085 Made in China For holding/attaching monitors To hold/attach to/on tables Fastening type screw fastening, clamping device Table top thickness 10 - 50 mm Max. dimensions screen size 43 - 81 cm (17 - 32 ") Material steel / aluminum VESA standards 75 x 75 mm, 100 x 100 mm Ergonomics Tilts from +90° to -45° Ergonomics Rotatable ± 90° Ergonomics Can be swiveled ± 180° Ergonomics Height adjustable from 215 mm - 495 mm Holder for 2 devices Load capacity 18 kg (2 x 9 kg) Feature High quality gas strut, removable VESA plates made of high quality steel Other functions Integrated cable management Further information Maximum arm extension 550mm Accessories available Allen key, screw set, quick assembly instructions
HDMI ™ with standard Ethernet is the latest HDMI supports standard, and the following HDMI Features: - HDCP Compliant - Internet via HDMI (HEC) - Audio return channel (ARC) - 3D playback with a resolution of Up to 1080p
ICY BOX kettaboks 2.5" to 3.5" HDD Converter, Converts a 2.5" SATA HDD or SSD to a 3.5" SATA HDD, Toolless HDD installation (EasySwap®), Enables the use of a high speed 2.5" SSD in a 3.5" case, With ...
