The NewStar desk mount, model FPMA-D885BLACK is a desk stand for flat screens up to 32". This mount is a great choice for space saving placement on desks using a desk stand. The mount is easily height adjustable from 7,5 to 32,5 centimetres using a gas spring. Depth 25 centimetres. NewStar FPMA-D885BLACK is suitable for screens up to 32" (81 cm). The weight capacity of this product is 10 kg. The desk mount is suitable for screens that meet VESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using NewStar VESA adapter plates. By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.
Ühenda monitor lauakinnituse abil ning naudi minimalistlikut töölauda. • Sobib 19" kuni 38" monitoridele ning kannab kuni 10 kg raskust • Kinnitus sobib VESA 100x100 • +90° kuni -90° kohandamine külgedel • Kaablite peitmise võimalus
DisplayPort M - DisplayPort M, version 1.2, 4K, gold-plated tips, 2m SAVIO CL-136 Example application: connecting a computer with a monitor or home cinema equipped with a DisplayPort connector. AWG (American wire gauge; also called Brown & Sharpe wire gauge) standardized diameter system of electric wires used in the United States. The cross-section of the cable directly transfers to the maximum current that the cable can safely conduct. As the AWG number increases, the thickness of the wire decreases.
4 Port USB 3.0 Hub - Connects 4 Type A USB peripherals to a Type A Port - Supports SuperSpeed data rates of up to 5Gbps - Handy and stylish design with integrated cable - Compatible with all USB Type A equipped computers
Toitekaabel (kaitsekontakt), 1,8 m, must turvapistik (tüüp F, CEE 7/7) 90° > seadme pistikupesa C5 universaalne toitejuhe nurga all oleva turvapistikuga ja IEC-60320-C5 pistikuga toitejuhe, mis sobib nt sülearvutite, monitoride või toiteplokkide ühendamiseks pistikupessa ideaalne kasutatud toitekaabli asendamiseks
Laiendab 4K HDMI 18G signaale üle 50 m kaugusele standardse võrgukaabliga Toetab kuni 3840x2160@60Hz 4:4:4 8bit resolutsiooni, HDR-i toetusega HDMI-läbivooluväljund loob täiendava vaatetsooni koos lokaalse ekraaniga PoC (Power over Cat.6) funktsionaalsus, mis tagab toite ühest toiteallikast. 2-aastane garantii Lindy Cat.6 HDMI 18G & IR Extender koos PoC-ga on tõhus ja usaldusväärne lahendus kvaliteetse 4K HDMI-signaali laiendamiseks kuni 50 m (164.04ft) kaugusele standardse Cat.5e/6 võrgukaabli abil. HDMI 2.0 18G spetsifikatsiooni tugi võimaldab edastada väga üksikasjalikke 4K Ultra HD resolutsioonide andmeid. Tänu High-Dynamic Range'i toetusele on videosisu vaadatav suurema heleduse, suurema mustade ja valgete kontrasti ning palju laiema värvigammaga, mis sobib ideaalselt tõelise kodukinoelamuse või silmatorkava digitaalse reklaami jaoks jaekeskkondades. HDCP 2.2 vastavus võimaldab 4K-videosisu, mis pärineb kopeerimisega kaitstud allikatest, näiteks Blu-Ray-filmidest, meediamängijatest ja voogedastusteenustest, vaadata ilma ühilduvusprobleemideta. Kadudeta audioformaatide, sealhulgas DolbyTrueHD ja DTS-HD toetus lisab videosisule võimsa mitmekanalilise heli, pakkudes vaatajale täiustatud elamust ja realistlikkuse tunnet. Extenderil on saatja HDMI-läbipääs, mis võimaldab samaaegset vaatamist kohalike ja kaugkuvarite abil. Selline mitmekülgsus pakub sobivat lahendust kasutamiseks erinevates stsenaariumides, näiteks hariduslikes esitlussüsteemides, kodukinos, meelelahutussüsteemides või messidel. Sisseehitatud EDID dip switch võimaldab kasutajal kontrollida, millist EDID-d võetakse kummaltki kuvarilt, muutes paigaldamise ja konfigureerimise lihtsaks, tagades maksimaalse ühilduvuse HDMI kuvarite ja projektoritega. PoC võimaldab nii toite- kui ka andmesignaalide edastamist üle Cat.6 kaabli punktist-punkti konfiguratsioonis, mis lisab paindlikkust, kuna nii saatja kui ka vastuvõtja jaoks on vaja ainult ühte toiteallikat. Ideaalne juhul, kui toitepunktid on piiratud. Tänu IR-läbipääsule saab allikaseadmeid ühilduvate infrapunapuldi abil tõrgeteta juhtida paigalduse kaugkuvarite poolelt, kasutades ühilduvaid infrapunapuldisidemeid. See tagab kasutajale lihtsa ja täieliku kontrolli. Pange tähele: See toode ei ole mõeldud kasutamiseks koos aktiivsete võrguseadmetega ja seda tohib kasutada ainult punkt-punkt ühenduses.
DST-Mini XT, USB-C Laptop Mini Docking Station with Single Display (4K) or Dual Display (Full HD) & 100W Pass Through Charging. - Adds two USB Type A ports & one USB Type C port (5Gbps), a 4K HDMI and DP port, Gigabit Ethernet and an Audio port to a laptop - Supports 3840x2160@30Hz for an HDMI or DP display and Full HD 1920x1080 for simultaneous use of HDMI and DP displays - Features DisplayPort Alternate Mode - Allows USB Power Delivery (PD 3.0, up to 100W) to charge the laptop while using the DST Mini XT
Active Optical (AOC) High speed HDMI cable with Ethernet "AOC Premium Series", 20 m - HDMI Active Optical Cable (AOC) uses fiber optic technology to transport the digital HDMI signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. HDMI AOC cables also have dedicated copper power wires inside, so no external power supply is required. - HDMI AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments - Durable extra thin premium quality braided cable with stylish metal connectors - Smaller cable diameter compared to traditional copper HDMI cables - Supports 4K UHD resolutions at 60Hz Cable length 20m Connectors HDMI Type-A male, Colour Black
DST-Pro USB4, USB-C Laptop Docking Station Connect an 8K display or 2 displays at 4K 60Hz and peripherals over a single cable Connects an HDMI and/or a DisplayPort display, USB peripherals and power over a single cable Supports 8K 30Hz for a single display or 4K 60Hz for two displays (MST)* Integrated 4 port USB SuperSpeed 10Gbps Hub (3 x Type A, 1 x Type C) USB Power Delivery capable up to 100W Dimensions 129x69.5x48mm Weight 0.3 kg
Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop. The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-C (F) female Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data: cable length 1.5 m, outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.
External USB audio adapter AXAGON ADA-12 easily and quickly adds missing headphones output or microphone input to your computer. It will also serve well as a replacement for the broken original integrated sound card in the notebook. The sound card is suitable for desktop computers and notebooks and allows you to connect headphones or active speakers and a microphone. Adapter metal housing is made of aluminum and thus provides perfect mechanical protection. Fixed cable guarantees sufficient flexibility. The sound card together with the headset will form an ideal accessory for online communication programs such as Skype, Zoom, MS Teams etc. The card is easy to install, just plug the sound card into the computer's USB port and the rest will be done automatically. Input: 1x USB 2.0 Full Speed USB port, backward compatible with USB 1.1. USB type A male connector located on a fixed 15 cm cable. Audio output: 2-channel analog 16-bit output (3.5 mm stereo jack): stereo output for headphones or active speakers. Audio input: 1-channel analog 16-bit input (3.5 mm stereo jack): mono microphone input. Sampling rate, resolution and output converter (DAC) noise: analog - 44.1 / 48 kHz @ 16 bit for playback, signal-to-noise ratio (Output SNR) 93dB, harmonic distortion (Output THD+N) -70dB. Sampling rate, resolution and input converter (ADC) noise: analog - 44.1 / 48 kHz @ 16 bit for recording, signal-to-noise ratio (Input SNR) 83dB, harmonic distortion (Input THD+N) -76dB. Other features: Easy to install thanks to full Plug and Play support. Possibility to connect your device while running thanks to the Hot Plug support. Compliant with the USB Audio Device Class specification v1.0. Adapter power supply via USB (bus power) - no auxiliary power supply required. Miniature dimensions of 29 x 29 x 12 mm, cable length 15 cm. Weight 16 g. Setting up a sound card in Windows allows: adjusting volume and balance of speakers, enhanced speaker features: Bass Boost, Virtual Surround Sound, Room Correction, Loudness Equalization, setting the sampling rate and bit depth for both reproduction and recording, setting the automatic level of gain for the microphone (Automatic Gain Control), setting the manual level of gain for the microphone. Supported OSs: MS Windows 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Compatible with all Internet telephony programs using the sound card. Package contains: audio adapter, printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
The AXAGON RUCM-AFA USB-C > USB-A adapter connects existing devices with a USB Type A connector to any new device with a modern USB Type C interface. Compact and durable adapter will allow, for example, fast connection of an existing USB 3.0 hub to laptops equipped with USB-C connectors only. USB-C > USB-A adapter can be used not only to transfer data, but also allows charging up to 3A. Aluminium body, quality connectors and USB 3.1 Gen 2 support up to 10 Gbit/s provide seamless functionality and long-term use. Input: Reversible USB Type C male connector. Compatible with USB 3.1 Gen 2, USB 3.1 Gen 1 / USB 3.0 a USB 2.0. Supports transmission rates 10.000 / 5.000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / high speed). Output: USB Type A female connector. Compatible with USB 3.1 Gen 2, USB 3.1 Gen 1 / USB 3.0 a USB 2.0. Supports transmission rates 10.000 / 5.000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / high speed). To connect existing devices and cables with USB Type A output. Other features: Hardware reduction without chips and electronics. Pulldown resistor 5 k. Durable aluminium body. Dimensions 31 x 15 x 7.5 mm, weight 4 g. Package contains: USB-C > USB-A adapter, packed in a heat sealed blister.
Acer HP.DSCAB.013. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Kõrvaklappide ühenduvus: 3,5 mm. Toote värv: Süsinik, Hõbe, HD tüüp: 8K Ultra HD, Maksimaalne digitaalresolutsioon: 7680 x ...
SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer. A handy helper for the easiest and fastest way of connecting SATA disks to your computer - just plug the disk into the base. Automatic installation can be done even by the layman. SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station. Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing. Input: USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s. Connection via micro USB type B female connector. Device support: SATA III - 6 Gb/s (600 MB/s) interface, supports 2.5" HDD/SSD, supports 3.5" HDD, max. disk capacity all without limitation, max. 2.5" disk height- all without limitation. Other features: Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0. Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed). Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s). Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport). SSD/HDD boot support in docking station. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. HDD Auto Spindown - automatic spinning down after period of inactivity lasting 15 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. cable micro USB-B / USB-A 80 cm long is included. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Power switch. Power supply via a compact external AC/DC adapter 12V - 2A (24 W) with a 150 cm long supply cable. Station dimensions 130 x 65 x 59 mm. Weight 190 g. Supported OSs: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: USB 3.2 Gen 1 HDD dock, micro USB-B - USB-A cable 80 cm long, power adapter 100-240V / 12V-2A, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with clearly indicated parameters.
Compact AXAGON ADM2-CM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-C cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-C to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 19 g. USB-C male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
