The HDMI extender kit extends the range of Full HD audio/video signals to a distance of up to 70 m, and the range of 4K / 30 Hz signals can be extended to a distance of up to 40 m with a CAT6 (or higher specification) network cable. The transmitter module is equipped with an HDMI output for connecting a local monitor. Thanks to PoC (Power over Cable) technology, only the transmitter needs to be connected to the power supply. Infrared (IR) signal transmission allows you to conveniently control the signal source using the remote control from the receiver (on the output screen). The scope of functionality also includes the function of copying the EDID of the output screen in the receiver or on HDMI-Loop Out, which can be selected using a switch. Extends the range of the HDMI audio-video signal to a distance of up to 70 m Supports resolutions up to 4K/30Hz, 4:4:4 HDMI 1.4, HDCP 1.4, DVI 1.0 Support for CAT 5e, CAT 6, CAT 6A, CAT 7, CAT 8 network cables Audio support: Up to 7.1ch HD audio PoC (Power over Cable) - only the transmitter requires an external power supply Loop-Out/HDMI output - connect a local monitor to the source device EDID copy function of the output screen in the receiver or on HDMI-Loop Out Infrared signal transmission (two-way) An infrared (IR) signal interface allows remote control of the input source via the output screen Suitable for wall mounting Metal housing
The HDMI extender kit is a high-performance video signal extender system consisting of transmitter and receiver modules. Extends the range of the Full HD audio-video signal up to 120 m using a CAT6 network cable (point-to-point connection). Additionally, you can use network switches and single receiver modules (DS-55518) to transmit video content over your existing network infrastructure (IP connection) to up to 253 displays and extend the coverage to an unlimited distance. Additionally, the integrated bidirectional infrared (IR) signal interface allows remote control of the input signal source via the output screen (on the receiver side). The solution allows you to extend the audio-video signal in Full HD via a CAT 6 cable over an unlimited distance via your existing network infrastructure or using commercially available network switches Extends the range of the Full HD audio-video signal via a CAT 6 cable to a distance of up to 120 m (point-to-point connection) Resolution support up to max. 1080p/60 Hz, Full HD Support for CAT 6, CAT 6A, CAT 7, CAT 8 network cables The infrared (IR) signal interface allows remote control of the input signal source via the output screen You can use additional receiver modules (DS-55518) and your existing network infrastructure to display video content on up to 253 screens (IP connection) Housing: metal Suitable for wall mounting
Active Optical (AOC) 8K DisplayPort cable "AOC Premium Series", 5 m Active Optical Cables (AOC) use fiber optic technology to transport the digital video signal. This means that the signal can be carried much further than with a traditional copper cable (up to 100 m), and reduces the risk of EMI/RFI interference. DisplayPort AOC cables also have dedicated copper power wires inside, so no external power supply is required. DisplayPort AOC cable uses fiber optic technology - reduces the risk of EMI/RFI in high interference environments Durable extra thin premium quality cable with stylish metal connectors Smaller cable diameter compared to traditional copper DP cables Supports 8K UHD resolutions at 60Hz
The Neomounts DS60-425BL2 NEXT Lite is a full motion desk mount for two screens up to 27" with a maximum weight capacity of 8 kg per screen. The versatile tilt (120°), rotate (360°) and swivel (180°) technology allows you to adjust the mount to the optimal viewing angle for your screens. Additionally, the mount has manual height and depth adjustment to create the perfect working position. Due to the short T-Rex® upper arm of the NEXT Lite, only minimal depth is required when placed near a wall or separation panel. This allows the screens to be positioned further away from the user which is better for the eyes and also leaves more space for good ergonomic working posture. The smart internal cable management system ensures orderly routing of the cables. The DS60-425BL2 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. Neomounts offers various optional VESA adapter plates for deviating hole patterns. The DS60-425BL2 is equipped with an Easy-release VESA system for easy installation and comes with both desk clamp and grommet.
The Neomounts DS70PLUS-450BL1 NEXT Core is a full motion desk mount for curved ultra-wide screens up to 49". The mount features a strengthened head specifically designed for curved ultra-wide screens and to support a higher maximum weight up to 18 kg (curved 14 kg). The versatile tilt (90°), rotate (360°) and swivel (180°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the screen. Additionally, the mount has gas spring height adjustment (26,1-55 cm) and depth adjustment (5,4-49,7 cm), to create the perfect working position. The DS70PLUS-450BL1 NEXT Core features the nifty 180° stop mechanism, that allows you to safely adjust the mount even when it's placed close to a wall or separation panel without making contact with the wall. The smart cable management system ensures orderly routing of the cables. The DS70PLUS-450BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available. The desk mount is equipped with an Quick-release VESA system and comes with both a topfix clamp and grommet for quick and easy installation.
DS70-250BL2 Neomounts desk monitor arm Neomounts DS70-250BL2 full motion monitor arm desk mount for 17-32" screens - Black The Neomounts DS70-250BL2 NEXT Slim is a full motion desk mount designed for two screens up to 32", boasting a maximum weight capacity of 9 kg per screen. The versatile tilt (90°), rotate (360°) and swivel (180°) technology enables seamless adjustment to any desired viewing angle to fully optimize the screen's capabilities. With the gas spring height adjustment (21,5-49,5 cm) and depth adjustment (7-52,5 cm) you can effortlessly adjust the mount to suit your ergonomic needs.
Desk mounted single monitor arm, 17”-32” Position your screen perfectly for an optimal ergonomic position Compact space saving solution Monitor desk mount with single monitor arm Allows to swivel tilt, pull forward and retract your display and enables rotating the display from landscape-to-portrait mode Works with almost any LCD monitor (max. 32" / 9 kg) Strong desk clamp or grommet for easy and secure fixation on your desk Built-in cable management for an organized and neat workspace VESA compatible (100 x 100 mm and 75 x 75 mm)
7-Zoll-Touch-Panel, zur Darstellung von Systemwerten oder als Shortcut-Bar, perfekt für Streaming oder Gaming, frei konfigurierbar, Auflösung von 1.024 x 600 Pixeln
The AXAGON ADSA-CC CLONE MASTER 2 universal USB-C 10Gbps adapter connects up to two drives to your computer quickly and easily at the same time. Easily connect any 2.5" or 3.5" drive directly to the adapter's external SATA connector. Simply insert the NVMe M.2 drive into the adapter body without the use of a screwdriver or other tools. You can also connect a SATA M.2 drive to the adapter using an external adapter such as the AXAGON RSS-M2SD. In the package you will find a USB-C USB-C cable with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Thanks to the cloning function without the need to connect to a PC, the adapter can be used as a stand-alone device for convenient duplication and disk imaging. The cloning direction is adjustable via a switch, so you can easily choose whether to clone the contents of an NVMe M.2 drive to a SATA drive or vice versa. After all the data is copied, the target disk is an exact copy of the original disk. This is the easiest way to transfer the contents of one drive to another, including a working operating system (Windows, macOS, Linux ...). In addition to the fast USB 10Gbps interface, the adapter also supports all important functions for working seamlessly with different types of drives, such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected M.2 and 2.5" drives only from the USB port. In case of connecting a 3.5" drive, the included power adapter is of course already required. These features make the CLONE MASTER 2 adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal helper for backup, migration, data transfer and storage, testing and cloning discs, etc. Input: USB 10Gbps (USB 3.2 Gen 2). Speed up to 10 Gbit/s. Connection via reversible USB type C female connector. M.2 slot device support: NVMe (PCI-Express) M.2 SSD one-sided and double-sided drives. Support of M.2 drives with a size of 2242, 2260, 2280 mm. Supports M-KEY & B+M-KEY NVMe M.2 SSD disks. No capacity limitation. Support for devices connected to the SATA port: SATA 2.5"/3.5" SSD/HDD. SATA M.2 SSD with M.2 -> SATA reduction e.g. AXAGON RSS-M2SD. No capacity limitation. Disk cloning feature: Cloning takes place without connecting the station to a computer. The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started. Cloning direction switch - from NVMe M.2 drive to SATA drive or from SATA drive to NVME M.2 drive. SSD cloning speed up to 500 MB/s. The total disk cloning time depends on the capacity of the source disk, not the amount of disk data. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0) and USB 480Mbps (USB 2.0). Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3c Specification. The total adapter bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1.000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8.1 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Support for booting from disks connected to the adapter. HDD Auto Spindown - automatic spinning down when they idle for 10 minutes. HDD Turn Off - turns off the drive after removing the device or spinning down the PC. Full Plug and Play support. Connection via USB-C female connector. Cable USB-C male USB-C male 30 cm length + USB-C -> USB-A reducer included. Adapter dimensions 102 x 68 x 15 mm. Adapter weight 73 g (without accessories). Power: USB Bus Power - for M.2 and 2.5" drives, power via the USB bus is sufficient. Self Power - for 3.5" drives, power is required using the included external AC/DC adapter 12V - 2A with a 150 cm cable. Power switch. LED indication: the green LED indicates that the adapter is powered on (permanent light). 2x orange LED indicates connection for each of the disks (permanent light) and data transmission (blinking). 4x blue LED indicates cloning process 25% -50% -75% -100% (blinking), resp. cloning completion (permanent light). Supported OS: Windows 8.1 / 10 / 11 and later, Windows Server 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: M.2 + 2.5"/3.5" SSD/HDD adapter, power adapter 100-240V / 12V-2A, 4 thermal conductive pads, USB-C USB-C cable 30 cm long + USB-C -> USB-A reduction, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.
DST-Micro 140, USB-C Laptop Micro Docking Station with 4K Support & 1.4m 60W Charging Cable 4k HDMI, PD 3.0 60W, USB 3.2 Gen 1, SD & microSD - Adds 2 USB Type A ports (5Gbps), an HDMI port and an SD card reader to your notebook - Integrated 1.4m USB Type C cable for convenient and flexible laptop charging - Supports HDMI resolution up to Ultra HD 4K 30Hz - Allows USB Power Delivery (3.0 up to 60W) to charge the laptop while using the DST-Micro 140.
5 in 1 USB 3.1 Type-C to HDMI + USB 3.0 + PD Docking Station > Supports USB 3.1 Type-C port to transmit data at 10 Gbps. > Supports 3 × USB 3.0 ports. > For sharing screens in high resolution, the device charges terminal devices that are uplinked with 100 W power at the same time. > Works with devices that have Type-C ports and mainstream systems. > Plug and play, it does not require any configurations and the integrated > For game console, phone, laptop and tablet.
MRCS511 | Host interface USB Type-C | Hub interfaces HDMI,USB 2.0 Type-A,USB Type-C | 5xPorts quantity | Data transfer rate 480 Mbit/s | Housing material Aluminium | Colour Silver | USB Power Delivery up to 84 W
The DIGITUS DA-73108 USB extension cable is designed to meet the data transfer demands of modern technology. With a double shielded construction, this cable ensures a stable and reliable connection, minimizing interference and maximizing speed.Featuring USB 3.0 and USB 3.1 compliance, it supports data transfer rates of up to 5 Gbps, allowing for efficient transfer of files. The cable is equipped with a male USB-C connector on one end and a female USB-C connector on the other, making it compatible with a wide range of devices, from laptops to smartphones.
The Neomounts DS90-325BL1 is a full motion height adjustable desk mounted workstation for screens up to 32", keyboard and mouse. The mount can support screens up to 9 kg (curved: 6 kg), while the keyboard tray can support max. 1 kg. The versatile tilt (70°), rotate (360°) and swivel (180°) technology allows the monitor arm to change to any viewing angle to fully benefit from the capabilities of the screen. The keyboard tray includes a wrist support and mouse pad for optimum comfort. The workstation desk mount has a large height adjustability range from 44-95 cm and can be used both seated and standing. To ensure quick repositioning and the most optimal working position, the DS90-325BL1 features gas spring height adjustment for both the monitor arm and keyboard tray arm. The smart cable management system ensures orderly routing of the cables. The DS90-325BL1 is suitable for screens that meet VESA hole pattern 75x75 or 100x100 mm and is equipped with a Quick-release VESA system for fast and easy installation. For non-standard hole patterns, Neomounts has various VESA optional adapter plates available.
The Club 3D CAC-1559 video adapter cable offers connectivity options with performance. Compliant with DisplayPort 2.1 standards, this cable provides a connection between devices with its 24 pin USB-C and 20 pin DisplayPort connectors. The cable supports DisplayPort Alternate Mode, enabling video transmission for resolutions up to 10K at 60 Hz, suitable for both professional and personal use. It features error correction, kink protection, and a transfer rate of up to 80 Gbps to ensure a connection.With support for multiple display resolutions including 8K at 60 Hz and 4K at 240 Hz, this cable is designed to handle the demands of high-definition audio and video experiences. Certified by VESA DP80, it is compatible with a wide range of devices and meets FCC, RoHS, and EMI standards, assuring users of its quality and safety. The bidirectional functionality ensures versatile connectivity, making it an essential tool for anyone seeking high-performance video solutions.
Universal wall mount, for VESA 400x400 mm, maximum load up to 125 kg Thanks to the easy and quick mounting system, this wall mount guarantees safe use, making it ideal for schools and other public buildings.
BenQ Ergo Arm BDH01. Paigaldus: Klamber/kaitsekrae, Maksimaalne kaal (mahutavus): 40 kg, Ekraani minimaalne suurus: 43,2 cm (17"), Ekraani maksimaalne suurus: 88,9 cm (35"), Paigaldussüsteemi ühilduvus (min): 75 x 75 mm, ...
TV wall mount (fixed), 43"-100" Position your screen perfectly Lightweight and flat design Heavy duty steel LCD screen wall mount Supports most 43" - 100" LCD TV's VESA compatible, max. 900 mm x 600 mm Automatic spring locks with quick release cords allow quick and easy TV fixation and removal Practical integrated bubble level for perfect alignment Distance to wall: 30 mm Includes all necessary installation materials
• Dual platform support This stand combines a monitor arm and a notebook tray, giving you space for both devices in one setup. It supports monitors up to 32" and 8 kg, and notebooks up to 17.3" and 5 kg • Ergonomic viewing height Adjust your screens to the ideal height and angle for comfortable working. The flexible arms help reduce strain on your neck and shoulders during long hours at the desk • Notebook tray design The open tray provides space for ventilation to keep your notebook cool. Non-slip silicone pads and adjustable claws hold it securely and protect it from scratches • Options for grommet and clamp mounting Whether your desk uses a grommet or a clamp setup, this stand fits easily. It’s suitable for most height-adjustable desks, adding stability without taking extra space • Cable management An integrated cable clip keeps wires neatly arranged along the arms. This helps maintain a tidy and clutter-free workspace • VESA® The stand supports both 75x75 mm and 100x100 mm VESA® plates. This makes it compatible with a wide range of monitors for flexible installation
The Maclean MC-137 mount for three monitors with a diagonal of 17 to 27 inches is a solution designed for people who value order, convenience, and full control over their workspace. It is the perfect choice for gamers, programmers, analysts, and content creators who use multiple screens simultaneously. The design allows for stable mounting of three monitors two on arms with gas springs and one mounted directly to the central pole. This solution combines complete freedom of adjustment with maximum stability and space savings.The two side arms are equipped with gas springs that allow for easy and smooth height adjustment of each monitor. Thanks to them, you can easily raise or lower the screens to suit your preferences. The gas mechanisms keep the monitors stable, eliminating vibrations and ensuring precise positioning. The central screen, mounted on the pole, can also be adjusted to the optimal height during installation, creating a consistent and ergonomic layout of three screens.
The NewStar desk mount FPMA-D700D3 allows you to attach 3 LCD/TFT screens up to 27" on a desk. With this mount you can easily swivel, tilt and rotate the monitor. The desk mount can hold screens up to 8 kg each and is mounted on a desk using a deskclamp. This model is suited for all LCD/TFT screens with a VESA 75x75 or 100x100 mm hole pattern. If the hole pattern on the back of your screen is different, please contact us for the opportunities. By using an ergonomic monitorarm you prevent neck- and back complaints. Ideal for use in offices and on counters or receptions.
Original part number DA-70216 Product name DIGITUS USB 2.0 Mini Hub, 4-port Slim Spider Producer DIGITUS Class of product USB hub Number of ports 4 Supported USB standards USB 2.0USB 1.1USB 1.0 Maximal external transmission speed 480 Mb/s Net weight 0.125 kg
Original part number A-HDMI-VGA-02 Product name Gembird adaptor HDMI-A(M)->VGA(F) + Audio Producer Gembird Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type HDMI male Plug 2 type VGA Female Other information Other information Colour Black Additional information VESA up to WUXGA, 1920 x 1080 at 60 Hz + 3.5 mm stereo jackInput: 1 x HDMI 19 pin male, v.1.4Supports resolutions up to 1920p (without extentions)Dimensions: 49 x 23 x 15 mm
